Über Oxidsulfide mit Åkermanitstruktur CaLaGa3S6O,SrLaGa3S6O,La2ZnGa2S6O und Sr2ZnGe2S6O

On Oxidesulfides of Åkermanitetype-Structure CaLaGa₃S₆O, SrLaGa₃S₆O, La₂ZnGa₂S₆O, and Sr₂ZnGe₂S₆O The oxide sulfides were prepared for the first time (space group and lattice constants see “Inhaltsübersicht”). The atomic positions were refined from single crystal X-ray data for CaLaGa₃S₆O and La₂ZnGa₂S₆O. Problems concerning the metal distribution on the crystallographic positions are discussed by comparing interatomic distances. The ratio c/a of the new compounds is compared with that of isotypic compounds from literature.     

(3S,6S)-及(3S,6R)-3-苄氧甲基-6-甲基-吗啉-2,5-二酮的 制备及其晶体结构

以2-溴丙酸和N-叔丁氧羰基-O-苄基-L-丝氨酸为起始试剂首先制得N-(2-溴丙基)-O-苄基-L-丝氨酸(BPBS), 在N,N-二甲基甲酰胺(DMF)/三乙胺(Et3N)溶剂中80 ℃经9 h后BPBS发生分子内环化反应生成(3S,6S)-3-苄氧甲基-6-甲 基-吗啉-2,5-二酮[(3S,6S)-BMMD]及(3S,6R)-BMMD共存体, 产率70%. 将所制得的共存体以乙酸乙酯为重结晶溶剂, 采用微分重结晶法, 经4次“溶解-部分重结晶”操作循环制得两种纯光学构型的(3S,6S)-BMMD和(3S,6R)-BMMD. 将两种光学纯双手性中心的BMMD分别溶于乙酸乙酯, 室温下培养得(3S,6S)-BMMD和(3S,6R)-BMMD的单晶体, 以X射线衍射法测定上述两种BMMD的分子结构.     

Isomers among the carbon sulfides C4S6--synthesis and crystal structures of alpha,alpha-C4S6, alpha,beta-C4S6, and of a second polymorph of the diiodine adduct alpha,beta-C4S6.I2

The reaction of the alpha and beta forms of C3S5(2-) with thiophosgene yields two isomeric carbon sulfides alpha,alpha-C4S6 and alpha,beta-C4S6, respectively. The crystal structures of both compounds could be determined for the first time. Both structures are made up of almost planar molecules. The alpha,alpha-isomer (1,3-dithiolo-(4,5-d)-1,3-dithol-2,5-dithione) is D2h-symmetric, while the alpha,beta-isomer is approximately Cs-symmetric. In the molecules of both isomers the two different C3S5 units are retained without significant alterations of structural parameters. alpha,alpha-C4S6 is unstable with respect to alpha,beta-C4S6. The molecular rearrangement can be induced by a short thermal treatment at 150 degrees C. Significant differences are found in the mass spectra fragmentation patterns. Only alpha,beta-C4S6 shows an intense signal for C3S2+ and is therefore a potential source for the synthesis of carbon subsulfide via flash vacuum pyrolysis. Only alpha,beta-C4S6 forms a stable adduct with I2. alpha,beta-C4S6.I2 was already known (F. L. Lu, K. M. Keshavarz-K, G. Srdanov, R. H. Jacobson and F. Wudl, J. Org. Chem., 1989, 54, 2165, ), but a second polymorph is formed on crystallisation from a different solvent. The two polymorphic forms do not show differences in the structures of the individual molecules but show a different packing pattern. alpha,beta-C4S6.I2 is remarkably thermally stable. Thermal analysis shows that I2 cleavage occurs in that temperature region above 200 degrees C when C-S bonds are broken and CS2 and I2 are simultaneously liberated. Performed at 270 degrees C thermolysis of alpha,beta-C4S6.I2 yields under cleavage of I2 and CS2 a black polymeric carbon sulfide (CS)x which is probably a mixture of graphitic carbon and unidentified amorphous polymeric carbon sulfides.     

Synthesis of 6S, 7S-anhydro-serricornine.

Diastereoselective and enantioselective reduction of the β-ketoester $\text{3}$ by yeast to $\text{4}$ provided the chiral starting material for a synthesis of 4RS,6S,7S-serricornine, having the same configuration as the natural product. This material was converted into optically active and diastereomerically pure 6S,7S-anhydro-serricornine ($\text{2}$).     

Total synthesis of (-)-(6S,7S,8S,9R,10S,2'S)-membrenone-A and (-)-(6S,7S,8S,9R,10S)- membrenone-B and structural assignment of membrenone-C

[reaction: see text] (-)-(6S,7S,8S,9R,10S,2'S)-Membrenone-A and (-)-(6S,7S,8S,9R,10S)-membrenone-B were prepared in 11 steps (3% and 2.4% overall yield, respectively). Key steps included a tin(II)-mediated aldol followed by a syn selective reduction, giving the C7-C9 stereocenters, a second chain extending aldol coupling, and a p-TsOH-promoted cyclization/dehydration giving the common gamma-dihydropyrone precursor. We have thus established that synthetic (-)-(6S,7S,8S,9R,10S,2'S)-membrenone-A, (-)-(6S,7S,8S,9R,10S)-membrenone-B, and (-)-(6S,7S,8S,9R,10S)-membrenone-C are the enantiomers of the natural products.     

The S(6) Point Group Conformers of the Hexamethylchalcogens: Me(6)S, Me(6)Se, Me(6)Te

The synthesis of Me(6)Te in 1990 stimulated the exploration of hexamethylchalcogen potential energy surfaces. This earlier ab initio work focused only on the D(3) conformers, but it has been noted that the pseudooctahedral X(CH(3))(6) compounds show either D(3) or S(6) symmetry. Here are reported the results of an ab initio molecular orbital study of the hexamethylchalcogens confined to S(6) symmetry. Stationary points were found for each of the three hexamethylchalcogens studied and were shown to be minima for the two larger hexamethylchalcogens. Each of the S(6) stationary points found was energetically higher lying than the earlier reported D(3) counterpart. These energy differences are discussed in terms of nuclear repulsion and molecular orbital bonding considerations.     

Total synthesis of (4R,5S,6E,14S)- and (4R,5S,6E,14R)-cystothiazoles F

Total synthesis of (4R,5S,6E,14S)- and (4R,5S,6E,14R)-cystothiazoles F 3 was achieved from the chiral bithiazole-type primary alcohols [(S)- and (R)-4-ethoxycarbonyl-2′-(1-hydroxymethylethyl)-2,4′-bithiazoles 8], which were obtained based on the enzymatic resolution of racemic alcohol 8 and its acetate 9. From a direct comparison by means of chiral HPLC between natural cystothiazole F 3 and synthetic compounds [(4R,5S,6E,14S)- and (4R,5S,6E,14R)-cystothiazoles 3], natural cystothiazole F 3 was found to be a 33:67 diastereomeric mixture [(4R,5S,6E,14S)-3:(4R,5S,6E,14R)-3 = 33:67].