共查询到20条相似文献,搜索用时 31 毫秒
1.
Javed MR Rashid MH Nadeem H Riaz M Perveen R 《Applied biochemistry and biotechnology》2009,157(3):483-497
Monomeric extracellular endoglucanase (25 kDa) of transgenic koji (Aspergillus oryzae cmc-1) produced under submerged growth condition (7.5 U mg−1 protein) was purified to homogeneity level by ammonium sulfate precipitation and various column chromatography on fast protein
liquid chromatography system. Activation energy for carboxymethylcellulose (CMC) hydrolysis was 3.32 kJ mol−1 at optimum temperature (55 °C), and its temperature quotient (Q
10) was 1.0. The enzyme was stable over a pH range of 4.1–5.3 and gave maximum activity at pH 4.4. V
max for CMC hydrolysis was 854 U mg−1 protein and K
m was 20 mg CMC ml−1. The turnover (k
cat) was 356 s−1. The pK
a1 and pK
a2 of ionisable groups of active site controlling V
max were 3.9 and 6.25, respectively. Thermodynamic parameters for CMC hydrolysis were as follows: ΔH* = 0.59 kJ mol−1, ΔG* = 64.57 kJ mol−1 and ΔS* = −195.05 J mol−1 K−1, respectively. Activation energy for irreversible inactivation ‘E
a(d)’ of the endoglucanase was 378 kJ mol−1, whereas enthalpy (ΔH*), Gibbs free energy (ΔG*) and entropy (ΔS*) of activation at 44 °C were 375.36 kJ mol−1, 111.36 kJ mol−1 and 833.06 J mol−1 K−1, respectively. 相似文献
2.
Kenzi Hori Nobuhisa Saitoh Shinjiro Kobayashi Tsugio Kitamura 《Theoretical chemistry accounts》1999,102(1-6):244-251
β, γ-Substituted γ-halo allylalkoxide ions decompose to form a halogen ion, formaldehyde, and an alkyne under mild conditions,
for example at room temperature. The E isomer does not differ from the Z isomer in terms of activation energy. We attempted
to shed light on the mechanism of the reaction by using ab initio molecular orbital calculations. The observed propensity
was confirmed by the present calculation on model molecules, γ-chloro allylalkoxide ions. We conducted further calculations
and compared the alkoxide results with a similar reaction of β-haloacrylate ions that release carbon dioxide instead of formaldehyde.
This similar reaction needs heating as high as 150°C. The activation energy of the acrylate ions (36–39 kcal mol−1) was calculated to be about 10 kcal mol−1 higher than that of the alkoxide ions. The activation energy of the E acrylate ion is smaller by 0.8 kcal mol−1 than that of the Z isomer at the MP2/6-31+G**//RHF/6-31+G* level of theory. This is consistent with experimental results.
While the ready deprotonation from the carboxylic group does not activate the acrylate ion very much, the alkoxide ion is
destabilized to a great degree in the process of anion formation. The difficulty in deprotonation that proceeds from the neutral
molecule is seen in the difference in the activation energies for the decomposition of the corresponding anions. Therefore,
the pK
a of a hydroxy or a carboxylic group plays the leading role in determining the magnitude of activation energies of allyl halides
with a negatively charged fragment.
Received: 2 July 1998 / Accepted: 9 September 1998 / Published online: 8 February 1999 相似文献
3.
Derivative of 8-hydroxyquinoline i.e. Clioquinol is well known for its antibiotic properties, drug design and coordinating
ability towards metal ion such as Copper(II). The structure of mixed ligand complexes has been investigated using spectral,
elemental and thermal analysis. In vitro anti microbial activity against four bacterial species were performed i.e. Escherichia coli, Pseudomonas aeruginosa, Serratia marcescens, Bacillus substilis and found that synthesized complexes (15–37 mm) were found to be significant potent compared to standard drugs (clioquinol
i.e. 10–26 mm), parental ligands and metal salts employed for complexation. The kinetic parameters such as order of reaction
(n = 0.96–1.49), and the energy of activation (E
a = 3.065–142.9 kJ mol−1), have been calculated using Freeman–Carroll method. The range found for the pre-exponential factor (A), the activation entropy (S* = −91.03 to−102.6 JK−1 mol−1), the activation enthalpy (H* = 0.380–135.15 kJ mol−1), and the free energy (G* = 33.52–222.4 kJ mol−1) of activation reveals that the complexes are more stable. Order of stability of complexes were found to be [Cu(A4)(CQ)OH] · 4H2O > [Cu(A3)(CQ)OH] · 5H2O > [Cu(A1)(CQ)OH] · H2O > [Cu(A2)(CQ)OH] · 3H2O 相似文献
4.
Joanna Wiśniewska 《Transition Metal Chemistry》2007,32(1):107-111
The kinetics of the oxidation of promazine by trisoxalatocobaltate(III) were studied in the presence of a large excess of
the cobalt(III) in tris buffer solution using u.v.–vis spectroscopy ([CoIII] = (0.6 − 2) × 10−3
M, [ptz] = 6 × 10−5
M, pH = 6.6–7.8, I = 0.1 M (NaCl), T = 288−308 K, l = 1 cm). The reaction proceeds via two consecutive reversible steps. In the first step, the reaction leads to formation of cobalt(II) species and a stable cationic
radical. In the second step, cobalt(III) is reduced to cobalt(II) ion and a promazine radical is oxidized to the promazine
5-oxide. Linear dependences of the pseudo-first-order rate constants (k
1 and k
2) on [CoIII] with a non-zero intercept were established for both redox processes. Rates of reactions decreased with increasing concentration
of the H+ ion indicating that the promazine and its radical exist in equilibrium with their deprotonated forms, which are reactive
reducing species. The activation parameters for reactions studied were as follows: ΔH≠ = 44 ± 1 kJ mol−1, ΔS≠ = −100 ± 4 JK−1 mol−1 for the first step and ΔH≠ = 25 ± 1 kJ mol−1, ΔS≠ = −169 ± 4 J K−1 mol−1 for the second step, respectively. Mechanistic consequences of all the results are discussed. 相似文献
5.
Rearrangements of cyclopentadienyl cyanates,isocyanates and their thio-,seleno-, and telluro-analogs
Dushenko G. A. Mikhailova O. I. Mikhailov I. E. Minyaev R. M. Minkin V. I. 《Russian Chemical Bulletin》2009,58(8):1713-1723
Dynamic NMR spectroscopy revealed that pentaphenylcyclopentadienyl isoselenocyanate undergoes reversible hetero-Cope rearrangement
(ΔG
≠
408 K ∼ 22 kcal mol−1, C6D5CD3) giving isomeric selenocyanate in which 1,5-sigmatropic shifts of the SeCN group along the perimeter of the cyclopentadiene
ring occur (ΔG
≠
298 K = 16.7 kcal mol−1, C6D5CD3). On the contrary, pentaphenylcyclopentadienyl iso(thio)cyanates Ph5C5NCO and Ph5C5NCS are structurally rigid compounds on the NMR time scale. The energy barrier to the 3,3-shift of the isoselenocyanate group
in pentaphenylcyclopentadienyl derivative Ph5C5NCSe (ΔG
298 K
≠ = 17.9 kcal mol−1) caclulated using the B3LYP/6-31G** method is 7.6 kcal mol−1 lower than for the unsubstituted analog H5C5NCSe. 相似文献
6.
J. Leitner K. Růžička D. Sedmidubský P. Svoboda 《Journal of Thermal Analysis and Calorimetry》2009,95(2):397-402
Heat capacity and enthalpy increments of calcium niobates CaNb2O6 and Ca2Nb2O7 were measured by the relaxation time method (2–300 K), DSC (260–360 K) and drop calorimetry (669–1421 K). Temperature dependencies
of the molar heat capacity in the form C
pm=200.4+0.03432T−3.450·106/T
2 J K−1 mol−1 for CaNb2O6 and C
pm=257.2+0.03621T−4.435·106/T
2 J K−1 mol−1 for Ca2Nb2O7 were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S
m0(CaNb2O6, 298.15 K)=167.3±0.9 J K−1 mol−1 and S
m0(Ca2Nb2O7, 298.15 K)=212.4±1.2 J K−1 mol−1, were evaluated from the low temperature heat capacity measurements. Standard enthalpies of formation at 298.15 K were derived
using published values of Gibbs energy of formation and presented heat capacity and entropy data: Δf
H
0(CaNb2O6, 298.15 K)= −2664.52 kJ molt-1 and Δf
H
0(Ca2Nb2O7, 298.15 K)= −3346.91 kJ mol−1. 相似文献
7.
Lixin Zhou 《Theoretical chemistry accounts》2000,105(1):86-92
Results of ab initio self-consistent-field (SCF) and density functional theory (DFT) calculations of the gas-phase structure,
acidity (free energy of deprotonation, ΔGo), and aromaticity of 1,2-diseleno-3,4-dithiosquaric acid (3,4-dithiohydroxy-3-cyclobutene-1,2-diselenone, H2C4Se2S2) are reported. The global minimum found on the potential energy surface of 1,2-diseleno-3,4-dithiosquaric acid presents a
planar conformation. The ZZ isomer was found to have the lowest energy among the three planar conformers and the ZZ and ZE
isomers are very close in energy. The optimized geometric parameters exhibit a bond length equalization relative to reference
compounds, cyclobutanediselenone, and cyclobutenedithiol. The computed aromatic stabilization energy (ASE) by homodesmotic
reaction (Eq 1) is −20.1 kcal/mol (MP2(fu)/6-311+G** //RHF/6-311+G**) and −14.9 kcal/mol (B3LYP//6-311+G**//B3LYP/6-311+G**).
The aromaticity of 1,2-diseleno-3,4-dithiosquaric acid is indicated by the calculated diamagnetic susceptibility exaltation
(Λ) −17.91 (CSGT(IGAIM)-RHF/6-311+G**//RHF/6-311+G**) and −31.01 (CSGT(IGAIM)-B3LYP/6-311+G**//B3LYP/6-311+G**). Thus, 1,2-diseleno-3,4-dithiosquaric
acid fulfils the geometric, energetic and magnetic criteria of aromaticity. The calculated theoretical gas-phase acidity is
ΔGo
1(298K)=302.7 kcal/mol and ΔGo
2(298K)=388.4 kcal/mol. Hence, 1,2-diseleno-3,4-dithiosquaric acid is a stronger acid than squaric acid(3,4-dihydroxy-3-cyclobutene-1,2-dione,
H2C4O4).
Received: 11 April 2000 / Accepted: 7 July 2000 / Published online: 27 September 2000 相似文献
8.
Tandra?Das Biplab?K.?Bera Subhasis?Mallick Parnajyoti?Karmakar Arup?Mandal Subala?Mondal Gauri?S.?De Alak?K.?Ghosh 《Transition Metal Chemistry》2010,35(7):885-890
The interaction of thiosemicarbazide with the title complex has been studied spectrophotometrically in aqueous medium as a
function of [complex], [thiosemicarbazide], pH and temperature at constant ionic strength. At pH 7.4, the reaction shows two
distinct paths; both of which are [thiosemicarbazide] dependent. A parallel reaction scheme fits well with the experimental
findings. An associative interchange mechanism is proposed for both the paths; the activation parameters calculated from Eyring
plots are ΔH1≠ = 14.2 ± 0.8 kJ mol−1, ΔS1≠ = −241 ± 2 JK−1 mol−1, ΔH2≠ = 30.8 ± 1.4 kJ mol−1 and ΔS2≠ = −236 ± 4 JK−1 mol−1. From the temperature dependence of the outer sphere association complex equilibrium constants, the thermodynamic parameters
calculated are ΔH1° = 34.25 ± 1.9 kJ mol−1, ΔS1° = 146 ± 6 J K−1 mol−1 and ΔH2° = 9.4 ± 1.1 kJ mol−1, ΔS2° = 71 ± 3 JK−1 mol−1, which gives a negative ΔG° at all temperatures studied, supporting the spontaneous formation of an outer sphere association
complex. 相似文献
9.
Thermal behavior of 1,2,3-triazole nitrate 总被引:1,自引:0,他引:1
Liang Xue Feng-Qi Zhao Xiao-Ling Xing Zhi-Ming Zhou Kai Wang Hong-Xu Gao Jian-Hua Yi Si-Yu Xu Rong-Zu Hu 《Journal of Thermal Analysis and Calorimetry》2011,104(3):999-1004
The thermal decomposition behaviors of 1,2,3-triazole nitrate were studied using a Calvet Microcalorimeter at four different
heating rates. Its apparent activation energy and pre-exponential factor of exothermic decomposition reaction are 133.77 kJ mol−1 and 1014.58 s−1, respectively. The critical temperature of thermal explosion is 374.97 K. The entropy of activation (ΔS
≠), the enthalpy of activation (ΔH
≠), and the free energy of activation (ΔG
≠) of the decomposition reaction are 23.88 J mol−1 K−1, 130.62 kJ mol−1, and 121.55 kJ mol−1, respectively. The self-accelerating decomposition temperature (T
SADT) is 368.65 K. The specific heat capacity was determined by a Micro-DSC method and a theoretical calculation method. Specific
heat capacity equation is
C\textp ( \textJ mol - 1 \text K - 1 ) = - 42.6218 + 0.6807T C_{\text{p}} \left( {{\text{J mol}}^{ - 1} {\text{ K}}^{ - 1} } \right) = - 42.6218 + 0.6807T (283.1 K < T < 353.2 K). The adiabatic time-to-explosion is calculated to be a certain value between 98.82 and 100.00 s. The critical
temperature of hot-spot initiation is 637.14 K, and the characteristic drop height of impact sensitivity (H
50) is 9.16 cm. 相似文献
10.
The relative enthalpies, ΔHo (0) and ΔHo (298.15), of stationary points (four minimum and three transition structures) on the •O3H potential energy surface were calculated with the aid of the G3MP2B3 as well as the CCSD(T)–CBS (W1U) procedures from which
we earlier found mean absolute deviations (MAD) of 3.9 kJ mol−1 and 2.3 kJ mol−1, respectively, between experimental and calculated standard enthalpies of the formation of a set of 32 free radicals. For
CCSD(T)-CBS (W1U) the well depth from O3 + H• to trans-•O3H, ΔHowell(298.15) = −339.1 kJ mol−1, as well as the reaction enthalpy of the overall reaction O3 + H•→O2 + •OH, ΔrHo(298.15) = −333.7 kJ mol−1, and the barrier of bond dissociation of trans-•O3H → O2 + •OH, ΔHo(298.15) = 22.3 kJ mol−1, affirm the stable short-lived intermediate •O3H. In addition, for radicals cis-•O3H and trans-•O3H, the thermodynamic functions heat capacity Cop(T), entropy So (T), and thermal energy content Ho(T) − Ho(0) are tabulated in the range of 100 − 3000 K. The much debated calculated standard enthalpy of the formation of the trans-•O3H resulted to be ΔfHo(298.15) = 31.1 kJ mol −1 and 32.9 kJ mol −1, at the G3MP2B3 and CCSD(T)-CBS (W1U) levels of theory, respectively. In addition, MR-ACPF-CBS calculations were applied
to consider possible multiconfiguration effects and yield ΔfHo(298.15) = 21.2 kJ mol −1. The discrepancy between calculated values and the experimental value of −4.2 ± 21 kJ mol−1 is still unresolved.
Note added in proof: Yu-Ran Luo and J. Alistair Kerr, based on the discussion in reference 12, recently presented an experimental
value of ΔfHo(298.15) = 29.7 ± 8.4 kJ mol−1 in the 85th edition of the CRC Handbook of Chemistry and Physics (in progress). 相似文献
11.
Fursemide is the chemical compound 4-chloro-2-(furan-2-ylmethylamino)-5-(aminosulfonyl) benzoic acid. It was oxidized by diperiodatocuprate(III)
in alkali solutions, and the oxidation products were identified as furfuraldehyde and 2-amino-4-chloro-5-(aminosulfonyl) benzoic
acid. The reaction kinetics were studied spectrophotometrically. The reaction was observed to be first order in [oxidant]
and fractional order each in [fursemide] and [periodate], whereas added alkali retarded the rate of reaction. The reactive
form of the oxidant was inferred to be [Cu(H3IO6)2]−. A mechanism consistent with the experimental results was proposed, in which oxidant interacts with the substrate to give
a complex as a pre-equilibrium state. This complex decomposed in a slow step to give a free radical that was further oxidized
by reaction with another molecule of DPC to yield 2-amino-4-chloro-5-(aminosulfonyl) benzoic acid and furfuraldehyde in a
fast step. This reaction was studied at 25, 30, 35, 40 and 45 °C, and the activation parameters E
a,ΔH
#,ΔS
# and ΔG
# were determined to be 51 kJ⋅mol−1,48.5 kJ⋅mol−1,−63.5 J⋅K−1⋅mol−1 and 67 kJ⋅mol−1, respectively. The value of log 10
A was calculated to be 6.8. 相似文献
12.
J. N. Zhang Z. C. Tan Q. F. Meng Q. Shi B. Tong S. X. Wang 《Journal of Thermal Analysis and Calorimetry》2009,95(2):461-467
The heat capacities (C
p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range
from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at
350.426 K. The melting temperature (T
m), the molar enthalpy (Δfus
H
m0), and the molar entropy (Δfus
S
m0) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol−1 and 51.676 J K−1 mol−1, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation.
The thermodynamic functions (H
T-H
298.15 and S
T-S
298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU
c(C6H8N2,cr)= −3500.15±1.51 kJ mol−1 and Δc
H
m0 (C6H8N2,cr)= −3502.64±1.51 kJ mol−1, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δr
H
m0 (C6H8N2,cr)= −1.74±0.57 kJ mol−1. 相似文献
13.
V. D. Kiselev E. A. Kashaeva M. S. Shihab M. D. Medvedeva A. I. Konovalov 《Russian Chemical Bulletin》2000,49(6):1040-1044
The partial molar volumes (V) and the enthalpies of dissolution (Δdis
H) for tetracyanoethylene, cyclopentadiene, and their Diels—Alder adduct were determined at 25°C. Eleven solvents of the π-
and n-donor type were used. The use of alkylbenzenes as solvents for tetracyanoethylene induces pronounced changes in the
enthalpy of dissolution (up to 26 kJ mol−1) and in the partial molar volume (up to 11 cm3 mol−1), whereas these parameters for the adduct change slightly. TheV and Δdis
H values for cyclopentadiene virtually do not depend on the nature of the solvent. In the case of tetracyanoethylene and the
adduct in n-donor solvents, considerable variations of theV and Δdis
H values are observed; they are not linear functions of the change in the partial molar volume of the adduct. Therefore, the
reaction volumes in acetonitrile (−40.69) and ethyl acetate (−45.56) differ sharply from those ino-xylene (−24.28) and mesitylene (−21.76 cm3 mol−1).
Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1046–1050, June, 2000. 相似文献
14.
Joanna Wiśniewska 《Transition Metal Chemistry》2007,32(6):811-815
The kinetics of the electron-transfer reactions between promazine (ptz) and [Co(en)2(H2O)2]3+ in CF3SO3H solution ([CoIII] = (2–6) × 10−3
m, [ptz] = 2.5 × 10−4
m, [H+] = 0.02 − 0.05 m, I = 0.1 m (H+, K+, CF3SO
3
−
), T = 288–308 K) and [Co(edta)]− in aqueous HCl ([CoIII] = (1 − 4) × 10−3
m, [ptz] = 1 × 10−4
m, [H+] = 0.1 − 0.5 m, I = 1.0 m (H+, Na+, Cl−), T = 313 − 333 K) were studied under the condition of excess CoIII using u.v.–vis. spectroscopy. The reactions produce a CoII species and a stable cationic radical. A linear dependence of the pseudo-first-order rate constant (k
obs) on [CoIII] with a non-zero intercept was established for both redox processes. The rate of reaction with the [Co(en)2(H2O)2]3+ ion was found to be independent of [H+]. In the case of the [Co(edta)]− ion, the k
obs dependence on [H+] was linear and the increasing [H+] accelerates the rate of the outer-sphere electron-transfer reaction. The activation parameters were calculated as follows:
ΔH
≠ = 105 ± 4 kJ mol−1, ΔS
≠ = 93 ± 11 J K−1mol−1 for [Co(en)2(H2O)2]3+; ΔH
≠ = 67 ± 9 kJ mol−1, ΔS
≠ = − 54 ± 28 J K−1mol−1 for [Co(edta)]−. 相似文献
15.
Yue Zhu Min Pu De-Cai Fang Yong-Qiang Ji Jing He David G. Evans 《Structural chemistry》2010,21(4):817-825
Abstract
The cis–trans isomerization pathways of 3,3′-azobenzene disulphonate in the S0 and T1 states are studied by DFT method at the B3LYP/6-31G(d,p) level. In the S0 state, the cis–trans isomerization concerns the complex pathway that is characterized by the inversion of one NNC angle combined with rotation around the NC bond, and the three sequential transition states are also found on the potential energy profile. Therefore, the cis–trans isomerization of 3,3′-azobenzene disulphonate can be understood in terms of a pathway involving successive rotation, inversion, and rotation processes. The energy barrier of the S0 state is 22.79 kcal mol−1. In the T1 state, the isomerization mainly concerns the rotational pathway around the NN double bond, and the two isomers are connected through only one transition state. The isomerization of the T1 state is related to a lower energy barrier, 5.02 kcal mol−1, but requires a change in spin-multiplicity. 相似文献16.
Mark A. W. Lawrence Sonia E. Thomas Paul T. Maragh Tara P. Dasgupta 《Transition Metal Chemistry》2011,36(5):553-563
The kinetics of the intra-molecular electron transfer of an adduct of l-ascorbic acid and the [Fe3IIIO(CH3COO)6(H2O)3]+ cation in aqueous acetate buffer was studied spectrophotometrically, over the ranges 2.55 ≤ pH ≤ 3.74, 20.0 ≤ θ ≤ 35.0 °C,
at an ionic strength of 0.50 and 1.0 mol dm−3 (NaClO4). The reaction of l-ascorbic acid and the complex cation involves the rapid formation of an adduct species followed by a slower reduction in
the iron centres through consecutive one-electron transfer processes. The final product of the reaction is aqueous iron(II)
in acetate buffer. The proposed mechanism involves the triaqua and diaqua-hydroxo species of the complex cation, both of which
form adducts with l-ascorbic acid. At 25 °C, the equilibrium constant for the adduct formation was found to be 86 ± 15 and 5.8 ± 0.2 dm3 mol−1 for the triaqua and diaqua-hydroxo species, respectively. The kinetic parameters derived from the rate expression have been
found to be: k
0 = (1.12 ± 0.02) × 10−2 s−1 for the combined spontaneous decomposition and k
1 = (4.47 ± 0.06) × 10−2 s−1 (ΔH
1‡ = 51.0 ± 2.3 kJ mol−1, ΔS
1‡ = −100 ± 8 J K−1 mol−1), k
2 = (4.79 ± 0.38) × 10−1 s−1 (ΔH
2‡ = 76.5 ± 0.8 kJ mol−1, ΔS
2‡ = 6 ± 3 J K−1 mol−1) for the triaqua and diaqua-hydoxo species, respectively. 相似文献
17.
N,N-dimethyl-3-oxa-glutaramic acid was purified and characterized by 1H-NMR, Fourier transform infrared spectroscopy (FT-IR) and elemental analysis. The thermal decomposition of the title compound
was studied by means of thermogravimetry differential thermogravimetry (TG-DTG) and FT-IR. The kinetic parameters of its second-stage
decomposition reaction were calculated and the decomposition mechanism was discussed. The kinetic model function in a differential
form, apparent activation energy and pre-exponential constant of the reaction are 3/2 [(1−α)1/3−1]−1, 203.75 kJ·mol−1 and 1017.95s−1, respectively. The values of ΔS
≠, ΔH
≠ and ΔG
≠ of the reaction are 94.28 J·mol−1·K−1, 203.75 kJ·mol−1 and 155.75 kJ·mol−1, respectively.
Supported by the National Natural Science Foundation of China (Grant No. 20106009) 相似文献
18.
Y. Xu-Wu Z. Hang-Guo S. Wu-Juan W. Xiao-Yan G. Sheng-Li 《Journal of Thermal Analysis and Calorimetry》2008,92(3):961-965
The copper(II) complex of 6-benzylaminopurine (6-BAP) has been prepared with dihydrated cupric chloride and 6-benzylaminopurine.
Infrared spectrum and thermal stabilities of the solid complex have been discussed. The constant-volume combustion energy,
Δc
U, has been determined as −12566.92±6.44 kJ mol−1 by a precise rotating-bomb calorimeter at 298.15 K. From the results and other auxiliary quantities, the standard molar enthalpy
of combustion, Δc
H
m
θ, and the standard molar of formation of the complex, Δf
H
m
θ, were calculated as −12558.24±6.44 and −842.50±6.47 kJ mol−1, respectively. 相似文献
19.
The adsorption of dibenzothiophene (DBT) in hexadecane onto NaY zeolite has been studied by performing equilibrium and kinetic
adsorption experiments. The influence of several variables such as contact time, initial concentration of DBT and temperature
on the adsorption has been investigated. The results show that the isothermal equilibrium can be represented by the Langmuir
equation. The maximum adsorption capacity at different temperatures and the corresponding Langmuir constant (K
L
) have been deduced. The thermodynamic parameters (ΔG
0,ΔH
0,ΔS
0) for the adsorption of DBT have also been calculated from the temperature dependence of K
L
using the van’t Hoff equation. The value of ΔH
0,ΔS
0 are found to be −30.3 kJ mol−1 and −33.2 J mol−1 K−1 respectively. The adsorption is spontaneous and exothermic. The kinetics for the adsorption process can be described by either
the Langmuir model or a pseudo-second-order model. It is found that the adsorption capacity and the initial rate of adsorption
are dependent on contact time, temperature and the initial DBT concentration. The low apparent activation energy (12.4 kJ mol−1) indicates that adsorption has a low potential barrier suggesting a mass transfer controlled process. In addition, the competitive
adsorption between DBT, naphthalene and quinoline on NaY was also investigated. 相似文献
20.
H. X. Ma B. Yan Y. H. Ren Y. Hu Y. L. Guan F. Q. Zhao J. R. Song R. Z. Hu 《Journal of Thermal Analysis and Calorimetry》2011,103(2):569-575
3,3-Dinitroazetidinium (DNAZ) salt of perchloric acid (DNAZ·HClO4) was prepared, it was characterized by the elemental analysis, IR, NMR, and a X-ray diffractometer. The thermal behavior
and decomposition reaction kinetics of DNAZ·HClO4 were investigated under a non-isothermal condition by DSC and TG/DTG techniques. The results show that the thermal decomposition
process of DNAZ·HClO4 has two mass loss stages. The kinetic model function in differential form, the value of apparent activation energy (E
a) and pre-exponential factor (A) of the exothermic decomposition reaction of DNAZ·HClO4 are f(α) = (1 − α)−1/2, 156.47 kJ mol−1, and 1015.12 s−1, respectively. The critical temperature of thermal explosion is 188.5 °C. The values of ΔS
≠, ΔH
≠, and ΔG
≠of this reaction are 42.26 J mol−1 K−1, 154.44 kJ mol−1, and 135.42 kJ mol−1, respectively. The specific heat capacity of DNAZ·HClO4 was determined with a continuous C
p mode of microcalorimeter. Using the relationship between C
p and T and the thermal decomposition parameters, the time of the thermal decomposition from initiation to thermal explosion (adiabatic
time-to-explosion) was evaluated as 14.2 s. 相似文献