无皂种子分散聚合法制备单分散双重响应性微凝胶

以N-异丙基丙烯酰胺及2-乙烯基吡啶为主要单体, 采用无皂种子分散聚合法制备了单分散的、具有温度及pH双重响应性能的核-壳结构微凝胶, 并以扫描电镜及动态激光光散射等手段对微凝胶粒子的结构和性能进行了研究. 溶胀行为研究表明, 微凝胶粒子具有独立的互不干扰的温度及pH敏感性能, 其体积相变温度与纯聚N-异丙基丙烯酰胺(PNIPAM)凝胶基本一致, 说明局部分布的弱电离单体不会对PNIPAM凝胶的体积相变温度造成影响.     

基于互穿网络结构的pH/温度双重刺激响应性微凝胶的研究

室温下采用氧化-还原引发体系,以低交联密度的聚(N-异丙基丙烯酰胺)(PNIPAM)微凝胶为种子,通过种子乳液聚合法合成由PNIPAM和聚丙烯酸(PAA)形成的具有互穿聚合物网络结构的微凝胶.傅立叶变换红外光谱分析结果表明微凝胶由PNIPAM和PAA两种聚合物组成,透射电镜表征结果证实微凝胶中PNIPAM和PAA两种聚合物形成了互穿网络结构.用动态激光光散射测试不同温度或pH值水介质中微凝胶的粒径,结果发现微凝胶具有良好的pH/温度双重刺激响应性.在水介质pH值大于5.5的情况下,PAA组分对微凝胶的体积相转变温度没有影响;而在水介质pH值为4.0的情况下,由于PAA与PNIPAM之间的氢键作用,微凝胶的体积相转变温度稍微降低.微凝胶中PAA组分含量越高,其pH刺激响应性越显著.     

聚(N-异丙基丙烯酰胺)/聚丙烯酰胺无机/有机互穿网络水凝胶的制备及表征

通过紫外引发聚合方法制备了无机交联的聚(N-异丙基丙烯酰胺)(PNIPAAm)/有机交联的聚丙烯酰胺(PAAm)互穿网络(IPN)水凝胶.利用FTIR和SEM分别表征了凝胶的化学结构和内部形态;测定了凝胶在高温(50℃)时的退溶胀性能;利用DMA和DSC分别研究了凝胶的储能模量随温度的变化及热相转变行为.研究表明,该IPN凝胶具有温度敏感性;与未互穿的无机交联PNIPAAm凝胶相比,IPN凝胶具有多孔的网络结构和超快的响应速率,如10min内失去90%的水;其储能模量增加了3～4倍,相转变行为变弱,而最低临界溶解温度(LCST)提高了1.4℃.     

温敏性纤维素/聚Ν-异丙基丙烯酰胺复合水凝胶的固体核磁共振表征及动力学研究

利用半互穿网络方法将具有温度响应的高分子聚N-异丙基丙烯酰胺( PNIPAM)与天然纤维素复合得到温敏性水凝胶。通过固体核磁共振的1 H,13 C CP/MAS(交叉极化/魔角旋转)和QCP(定量交叉极化)等实验手段对复合凝胶的结构进行了定性及定量研究,并利用固体静态变温核磁共振实验和偶极滤波-自旋扩散实验研究了复合凝胶中PNIPAM分子链段的动力学行为。     

浊度法表征温敏性微凝胶体积的相转变行为

以N-异丙基丙烯酰胺(NIPAM)、甲基丙烯酸(MAA)为单体,N,N-亚甲基双丙烯酰胺(MBA)为交联剂,制备了温敏性聚(N-异丙基丙烯酰胺)(PNIPAM)和具有温度、pH敏感性的聚(N-异丙基丙烯酰胺-co-甲基丙烯酸)(PNIPAM-MAA)微凝胶。通过测定不同温度和pH条件下微凝胶浊度变化,表征微凝胶的温度及pH敏感性,描述了NaCl浓度和pH对微凝胶体积相转变温度的影响。同时,测定了微凝胶的临界聚沉浓度及临界絮凝温度,表征了微凝胶的稳定性,讨论了影响微凝胶的稳定性因素。     

多孔聚N-异丙基丙烯酰胺水凝胶的制备与缓释性能

以N-异丙基丙烯酰胺(NIPA)、N,N-亚甲基双丙烯酰胺(MBA)和聚乙二醇(PEG)为原料,以60Co-γ射线为放射源制备了快速响应聚N-异丙基丙烯酰胺(PNIPA)多孔水凝胶。用红外光谱分析了水凝胶的结构,并测定了水凝胶的溶胀动力学、退溶胀动力学和平衡溶胀率。结果表明,PEG分子仅在聚合交联过程中充当成孔剂,不参与反应,反应后可被除去;水凝胶具有明显的温度敏感性,成孔剂的添加提高了水凝胶的溶胀性能和LCST。选用阿司匹林为模型药物,对水凝胶的药物缓释性能进行了初步研究。     

AuNPs/PNIPAM复合颗粒的制备及其温敏性质

将金纳米颗粒(AuNPs)组装到聚N-异丙基丙烯酰胺(PNIPAM)水凝胶微球表面制备出AuNPs/PNIPAM复合颗粒. 将PNIPAM 凝胶的温敏特性与AuNPs的光学性质结合, 通过改变温度调节AuNPs的局部表面等离子共振(LSPR)吸收峰位置. 研究结果表明, 温度升高使AuNPs的LSPR吸收峰发生红移, 并且这种效应是可逆的. 同时发现, AuNPs的光学性质还可以作为表征PNIPAM水凝胶微球温敏行为的一种手段. 利用透射电镜、紫外-可见光谱仪及动态光散射仪对AuNPs/PNIPAM复合颗粒的形貌、光学性质、粒径变化等进行了分析.     

PNIPAM温敏微凝胶在生物医学领域中的应用研究

水凝胶因其良好的生物相容性及环境刺激响应性而在生物医学领域有着广泛的用途,但仍存在机械强度差、响应速度慢、不能生物降解等缺点。针对这些问题,特别是宏观水凝胶响应慢的问题,我们近年来以具有温度敏感性的聚N-异丙基丙烯酰胺(PNIPAM)微凝胶为基础,设计制备了一系列生物材料,分别应用于药物控释、生物传感以及组织工程等生物医学领域。我们设计制备了具有良好葡萄糖敏感性的PNIPAM微凝胶,实现了可自我调控的胰岛素可控释放。以PNIPAM微凝胶为基础,提出了新的聚合胶态晶体阵列光学传感方法,设计制备了多种可快速响应的新型生物光学传感器。实现了PNIPAM微凝胶的实时凝胶化,并将其发展成为一种新型的可注射细胞支架材料。进一步利用该体系的可逆性,提出了制备在药物筛选、肿瘤研究以及组织工程等领域有重要用途的多细胞球的新方法。     

纤维素纳米纤维接枝聚(N-异丙基丙烯酰胺)水凝胶的制备与表征

将具有温度响应的聚N-异丙基丙烯酰胺(PNIPAm)接枝到电纺纤维素纳米纤维膜上,制备温度响应型纤维素接枝聚N-异丙基丙烯酰胺(PNIPAm-g-Cell)纳米纤维水凝胶。 研究接枝单体(N)与纤维素(c)的质量比、反应温度、反应时间和引发剂浓度对产物接枝率、溶胀性和形貌的影响。 结果表明,最佳聚合反应条件为m(N):m(c)=15:1、反应温度40 ℃、反应时间3 h、引发剂浓度为10 mmol/L,得到PNIPAm-g-Cell接枝率和溶胀率分别为35%和31%。 与PNIPAm相比,PNIPAm-g-Cell水凝胶的低临界相转变温度(LCST)显著升高,说明亲水性纤维素的引入改变了体系的亲疏水平衡。 去溶胀动力学测试表明,0.5 min内接枝率为25%和35%的水凝胶保水率分别降低至93%和61%。 说明接枝率越高PNIPAm-g-Cell水凝胶对温度的响应速度越快,对温度越敏感。     

光化学合成快速响应聚(N,N-二甲基丙烯酰胺-co-N-异丙基丙烯酰胺)水凝胶

通过光化学合成方法分别在高温(50℃)和室温(28℃)下实现了N,N-二甲基丙烯酰胺(DMAA)和N-异丙基丙烯酰胺(NIPAm)的交联共聚,制备了两种不同结构的P(DMAA-co-NIPAm)共聚物水凝胶.对两种温度下制备的P(DMAA-co-NIPAm)共聚物水凝胶的网络结构、溶胀与消溶胀速率和温度敏感性等方面进行了比较研究.结果发现,50℃下制备的P(DMAA-co-NIPAm)共聚物凝胶具有较为疏松的网络结构和相对较快的溶胀速率及温度响应特性.光化学合成方法较传统的热聚合制备方法具有简便、快捷的特点,合成过程仅需2 min.     

海藻酸钠和聚N-异丙基丙烯酰胺半互穿网络水凝胶的溶胀动力学研究

以海藻酸钠 (SA)和N 异丙基丙烯酰胺 (NIPAM)为原料 ,制备出具有温度敏感性的半互穿网络水凝胶 (SA PNIPAMsemi IPN) .主要研究了海藻酸钠用量、水介质温度及pH值对该凝胶溶胀速率的影响 .结果表明 ,在PNIPAM最低临界溶解温度 (LCST)以下 ,该凝胶的溶胀速率随着凝胶网络中SA组分的增加而增大 ,且溶胀速率取决于高分子链的松弛速率 ;pH对凝胶溶胀速率的影响与温度有关 ,温度对溶胀速率的影响与pH有关 .     

A bioinspired 4D printed hydrogel capsule for smart controlled drug release

With the ever-increasing demands for personalized drugs, disease-specific and condition-dependent drug delivery systems, four-dimensional (4D) printing can be used as a new approach to develop drug capsules that display unique advantages of self-changing drug release behavior according to the actual physiological circumstances. Herein, a plant stomata-inspired smart hydrogel capsule was developed using an extrusion-based 4D printing method, which featured with UV cross-linked poly(N-isopropylacrylamide) (PNIPAM) hydrogel as the capsule shell. The lower critical solution temperature (LCST) of the PNIPAM hydrogels was approximately 34.9 °C and macroporous PNIPAM hydrogels were prepared with higher molecular weight polyethylene glycols (PEGs) as the pore-forming agents. Owing to the LCST-induced shrinking/swelling properties, the prepared PNIPAM hydrogel capsules exhibited temperature-responsive drug release along with the microstructure changes in the PNIPAM hydrogels. The in vitro drug release test confirmed that the PNIPAM hydrogel capsules can autonomously control their drug release behaviors on the basis of ambient temperature changes. Moreover, the increased PEG molecular weights in the macroporous PNIPAM hydrogel capsules caused an obvious improvement of drug release rate, distinctly indicating that the drug release profiles can be well programmed by adjusting the internal pore size of the hydrogel capsules. In vitro biocompatibility studies confirmed that the PNIPAM hydrogel capsules have great potential for biomedical applications. The bioinspired 4D printed hydrogel capsules pioneer the paradigm of smart controlled drug release.     

Nanoporous TiO2/polyion thin-film-coated long-period grating sensors for the direct measurement of low-molecular-weight analytes

We present novel nanoporous TiO(2)/polyion thin-film-coated long-period fiber grating (LPFG) sensors for the direct measurement of low-molecular-weight chemicals by monitoring the resonance wavelength shift. The hybrid overlay films are prepared by a simple layer-by-layer deposition approach, which is mainly based on the electrostatic interaction of TiO(2) nanoparticles and polyions. By the alternate immersion of LPFG into dispersions of TiO(2) nanoparticles and polyions, respectively, the so-formed TiO(2)/polyion thin film exhibits a unique nanoporous internal structure and has a relative higher refractive index than LPFG cladding. In particular, the porosity of the thin film reduces the diffusion coefficient and enhances the permeability retention of low-molecular-weight analytes within the porous film. The increases in the refractive index of the LPFG overlay results in a distinguished modulation of the resonance wavelength. Therefore, the detection sensitivity of LPFG sensors has been greatly improved, according to theoretical simulation. After the structure of the TiO(2)/polyion thin film was optimized, glucose solutions as an example with a low concentration of 10(-7) M was easily detected and monitored at room temperature.     

Synthesis and swelling behavior of comb‐type grafted hydrogels by reversible addition–fragmentation chain transfer polymerization

The comb‐type grafted hydrogels poly(N‐isopropylacrylamide)‐g‐poly(N‐isopropylacrylamide) (PNIPAM‐g‐PNIPAM) and poly(acrylic acid)‐g‐poly(N‐isopropylacrylamide) (PAAc‐g‐PNIPAM) were prepared by reversible addition–fragmentation chain transfer polymerization. A macromolecular chain‐transfer agent was prepared first. Then, hydrogels were obtained by a reaction with a comonomer (N‐isopropylacrylamide or acrylic acid) in the presence of N,N‐methylenebisacrylamide as a crosslinker. The equilibrium swelling ratios and the swelling and deswelling kinetics of PNIPAM‐g‐PNIPAM were measured. The effects of the chain length and amount on the swelling behavior were investigated. The deswelling mechanism was illustrated. Meanwhile, the PAAc‐g‐PNIPAM hydrogel was used to confirm the versatility of this novel method. It was prepared in an alcoholic medium, whereas hydrogen‐bonding complexes formed in 1,4‐dioxane, which was chosen as the reaction medium for the PNIPAM‐g‐PNIPAM hydrogel. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2615–2624, 2005     

Organic–inorganic hybrid hydrogels involving poly(N‐isopropylacrylamide) and polyhedral oligomeric silsesquioxane: Preparation and rapid thermoresponsive properties

3‐Acryloxypropylhepta(3,3,3‐trifluoropropyl) polyhedral oligomeric silsesquioxane (POSS) was synthesized and used as a modifier to improve the thermal response rates of poly(N‐isopropylacrylamide) (PNIPAM) hydrogel. The radical copolymerization among N‐isopropylacrylamide (NIPAM), the POSS macromer and N,N′‐methylenebisacrylamide was performed to prepare the POSS‐containing PNIPAM cross‐linked networks. Differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) showed that the POSS‐containing PNIPAM networks displayed the enhanced glass transition temperatures (T_g's) and improved thermal stability when compared with plain PNIPAM network. The POSS‐containing PNIPAM hydrogels exhibited temperature‐responsive behavior as the plain PNIPAM hydrogels. It is noted that with the moderate contents of POSS, the POSS‐containing PNIPAM hydrogels displayed much faster response rates in terms of swelling, deswelling, and re‐swelling experiments than plain PNIPAM hydrogel. The improved thermoresponsive properties of hydrogels have been interpreted on the basis of the formation of the specific microphase‐separated morphology in the hydrogels, that is, the POSS structural units in the hybrid hydrogels were self‐assembled into the highly hydrophobic nanodomains, which behave as the microporogens and promote the contact of PNIPAM chains and water. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 504–516, 2009     

阳离子型温敏水凝胶的合成与性质

阳离子型温敏水凝胶的合成与性质王昌华卢英先曹维孝（北京大学化学与分子工程学院北京１００８７１）关键词热缩温敏水凝胶，Ｎ 异丙基丙烯酰胺，Ｎ 乙烯基吡啶氟硼酸盐，Ｎ 甲基 ４ 乙烯基吡啶硫酸甲酯盐水凝胶可看作是水溶或亲水高分子的一种亲水网络．多数...     

Poly(N-isopropylacrylamide) nanocrosslinked by polyhedral oligomeric silsesquioxane: temperature-responsive behavior of hydrogels

Octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane (OpePOSS) was used as a nanocrosslinking agent to prepare the crosslinked poly(N-isopropylacrylamide) (PNIPAM) networks with POSS content up to 50 wt%. The inter-component crosslinking was achieved via the reaction between NH moieties in amide group of PNIPAM and epoxide groups of OpePOSS. When the organic-inorganic nanocomposites were swollen in water the POSS-crosslinked PNIPAM exhibited the characteristics of hydrogels. With the moderate contents of POSS, the POSS-containing hybrid hydrogels displayed much faster response rates in swelling, deswelling and reswelling experiments than the PNIPAM hydrogels prepared via the free radical copolymerization of N-isopropylacrylamide (NIPAM) and N,N(')-methylenebisacrylamide (viz. the conventional crosslinker). The improved hydrogel properties have been interpreted on the basis of the formation of the nanosized hydrophobic microdomains around the POSS moieties (i.e., the nanocrosslinking sites).     

Synthesis of the Functional Hydrogels: Poly(N-isopropylacrylamide) Threaded onto the PEG Backbones Via RAFT

Functional poly(N-isopropylacrylamide) (PNIPAM) hydrogels were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization of NIPAM in the presence of four-arm poly(ethylene glycol) (4A-PEG) as backbone and 4-cyanopentanoic acid dithiobenzoate functional α -cyclodextrin threaded onto the PEG as chain transfer reagent (CTA).The structure of the hydrogels was characterized in detail with FTIR techniques. The analytical results demonstrated that α -cyclodextrin remains in as-obtained hydrogels. The swelling behavior was investigated and the functional hydrogels (functional gels) showed accelerated shrinking kinetics and higher swelling ratio comparing with conventional hydrogel (CG). It could be attributed to the presence of dangling chains. The hydrogel exhibited rapid swelling and deswelling kinetics. In principle, the hydrogel might find a number of applications including an on-off system and drug delivery systems.     

High swelling gels for sensing applications

Crosslinked hydrophilic polymers of different chemical structures can be used as sensor coatings for the detection of gaseous analytes. If their crosslink density is low, these materials behave in aqueous media as soft hydrogels with high swelling capacity. From a physico-mechanical standpoint, they are amorphous rubber-like materials, with high flexibility of their macromolecular chains. This property is particularly significant in view of applications in the sensors field, because it favours diffusion of the analyte molecules through the coating layer. This paper deals with the application of poly(ethylene glycols) (PEG)- and poly(N-vinylpyrrolidinone) (PVP)-based crosslinked resins as relative humidity (RH) sorbing materials, and of a poly(amidoamine)(PAA)-based resin as SO₂-sorbing material. The electronic devices used for evaluating the sorption capability of these polymeric coatings were gravimetric resonant sensors. Resins of various crosslink density, and therefore of various swelling ratios in water, were purposely prepared and characterized. Thin coating, layers, prepared by casting from dilute aqueous suspensions of the resins, previously micronized in water, were used for sorption experiments. All experiments were performed in controlled RH and temperature environments.     

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels formed by macrocrosslinker as drug delivery system

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels made of poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) network and poly(N‐isopropylacrylamide) (PNIPAM) grafting chains were successfully synthesized by the combination of atom transfer radical polymerization (ATRP), reversible addition‐fragmentation chain transfer (RAFT) polymerization, and click chemistry. PNIPAM having two azide groups at one chain end [PNIPAM‐(N₃)₂] was prepared with an azide‐capped ATRP initiator of N,N‐di(β‐azidoethyl) 2‐chloropropionylamide. Alkyne‐pending poly(N,N‐dimethylaminoethyl methacrylate‐co‐propargyl acrylate) [P(DMAEMA‐co‐ProA)] was obtained through RAFT copolymerization using dibenzyltrithiocarbonate as chain transfer agent. The subsequent click reaction led to the formation of the network‐grafted hydrogels. The influences of the chemical composition of P(DMAEMA‐co‐ProA) on the properties of the hydrogels were investigated in terms of morphology and swelling/deswelling kinetics. The dual stimulus‐sensitive hydrogels exhibited fast response, high swelling ratio, and reproducible swelling/deswelling cycles under different temperatures and pH values. The uptake and release of ceftriaxone sodium by these hydrogels showed both thermal and pH dependence, suggesting the feasibility of these hydrogels as thermo‐ and pH‐dependent drug release devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011