强非线性吸收下高斯光束Z-扫描衍射理论模型

 摘要：在同时考虑非线性折射和非线性吸收的情况下，借助光的衍射理论，研究了Z-扫描技术的衍射理论模型，分析了非线性折射和非线性吸收同时存在时Z-扫描曲线的形状特征和变化规律。数值计算表明，非线性吸收相移和非线性折射相移的比值是影响接收小孔输出光功率的重要因素。要想得到好的光限幅效果，应选取非线性相移比值远小于1或远大于2的非线性材料。     

Comparison of the Gaussian-decomposition and the Fresnel-Kirchhoff diffraction methods in circular and elliptic Gaussian beams

In this investigation, the Gaussian decomposition and the Fresnel-Kirchhoff diffraction methods are compared from different view points. The virtues and faults of each method and also the reliable region of each one are discussed. This work is based on a numerical method for both the circular and elliptic Gaussian beams and results are compared with experimental data. This study is useful for materials exhibit optical Kerr effect such as two photon absorption and thermo-optical nonlinearities.     

高斯光束通过非线性折射和吸收介质的光强分布

以衍射理论为基础,推导并模拟了高斯光束通过非线性折射和吸收效应介质后的远场光强分布。结果表明:入射高斯光束引起的介质折射率变化和光束波前曲率影响介质出射面光束的径向调制相位,安装在焦点前的有自聚焦效应的介质和安装在焦点后的有自散焦效应的介质具有闪耀光栅的能力,使远场出现中心为暗斑外侧为亮环的衍射图样。非线性折射效应为主的介质,其非线性吸收效应的变化同时改变远场衍射图样的数目和光强值,但对于非线性吸收效应为主的介质,衍射图样的数目随吸收效应的变化不明显,吸收效应只影响光强值。     

Induced focusing and conversion of a Gaussian beam into an elliptic Gaussian beam

We have presented an investigation of the induced focusing in Kerr media of two laser beams, the pump beam and the probe beam, which could be either Gaussian or elliptic Gaussian or a combination of the two. We have used variational formalism to derive relevant beam-width equations. Among several important findings, the finding that a very week probe beam can be guided and focused when power of both beams are well below their individual threshold for self-focusing, is a noteworthy one. It has been found that induced focusing is not possible for laser beams of any wavelength and beam radius. In case both beams are elliptic Gaussian, we have shown that when power of both beams is above a certain threshold value then the effective radius of both beams collapses and collapse distance depends on power. Moreover, it has been found that induced focusing can be employed to convert a circular Gaussian beam into an elliptic Gaussian beam.     

高斯光束通过非线性介质层的限幅效应

本文用数值分析的方法研究了两维高斯光束通过一定厚度的非线性折射介质后在线性空间传播的状态,分析了光束的近场和远场横向强度分布及通过一定孔径光阑的功率.结果表明,在考虑到光束经过非线性介质时,相位与横向分布都会发生变化后,仅在非线性折射效应作用下,在远场就存在限幅效应.在一定的强度范围之内,近场也存在限幅利用的可能性.     

Focus evolution of Gaussian beam induced by phase plate

In this article, vector diffraction theory is employed to investigate the focusing properties of the Gaussian beam through a phase plate. The phase plate may alter the wavefront phase of an incoming beam by topological charge. Both the circular phase distribution and the annular phase distribution plates are investigated. Numerical simulations show that the focal intensity distribution depends on topological charge. With changing topological charge, focal intensity distribution may evolve into ring shape, and some novel focal spots may occur. Focal intensity distribution evolving process with integer topological charge differs considerably from that with fraction topological charge. When the concentric annular phase plate is placed in the laser path, the focal intensity distribution depends on both the inner radius and topological charge. For small inner radius of the phase plate, doughnut-shape focal pattern occurs. With increasing inner radius, the diameter of the doughnut focal pattern decreases, and doughnut shape disappears slowly in some cases.     

Gradient force evolution of Gaussian beam induced by a phase plate

The evolution of gradient force pattern induced by an annular phase distribution plate is numerically investigated in this paper. The phase plate, which may alter the wavefront phase of incident Gaussian beam with tunable topological charge, consists of two concentric portions, one center circle portion and one annular portion. Numerical simulations show that the proposed plate can induce the tunable gradient force on the particles in the focal region. By adjusting the geometrical parameters or changing the topological charge of the phase-shifting plate, some novel trap patterns may occur, such as triangle shape trap, quadrangle shape trap, pentagon shape trap, hexagon shape trap, and the shapes of optical traps change very considerably. Therefore, the phase plate may be very advantageous for constructing tunable optical traps. The method is more versatile in that it allows precise control of the parameters and has the possibility of generating specific patterns of optical vortices. The gradient force pattern focal of intensity distribution depends on both the annular width and the topological charge.     

Automatic optimization design of Gaussian beam shaping system by using ZEMAX software

This paper studies the method of automatic optimization design of Gaussian beam shaping. Firstly, the principle of Gaussian beam shaping was studied theoretically and the flattened Lorentzian function (FL) is chosen as the distribution of flattened beam. The mapping function of arbitrary ray in incident plane and image plane was deduced based on the law of conservation of energy. And then, according to the characteristics of this system, Zemax programming language (ZPL) was used to compile ZPL macro orders to optimize the Gaussian beam shaping automatically. Finally, optical analyzing software was used to test the aspheric lens system. The method is not only simple but also practical with high efficient energy conversion and significant engineering application value.     

Small Gaussian laser beam diameter measurement using a quadrant photodiode

A method that uses the quadrant photodiode has been shown to be relatively inexpensive and robust in measuring Gaussian laser beam diameters in two axes. This approach requires neither component rotation nor precision alignment, and it facilitates integration of Gaussian laser beam diameter measurement with laser beam tracking in instruments. The physical gap between sensors in the quadrant photodiode, however, limits laser beam diameter measurements to those in the millimeter range. Here, we describe a modified approach to measure Gaussian laser beam diameters that are significantly smaller.     

Propagation of high-order Bessel–Gaussian beam through a misaligned first-order optical system

The generalized diffraction integralis used to derive a generalized formula for high-order Bessel–Gaussian beams (HBGBs) through a misaligned first-order ABCD optical system. It is found that, when a HBGB propagates through a misaligned optical system, the beam shape of the output beam is unchanged. However, the center of the output beam is deviated from the optical axis, forming a decentered HBGB. The position of the output beam may be controlled by adjusting the misaligned parameters. Based on the derived formula, the diffraction patterns of HBGBs propagating through a simple misaligned lens system have been calculated numerically. These results may be useful in the application of laser beams for trapping and manipulating a wide variety of particles.     

横向激发线偏振高斯光束的非傍轴传输

文章提出一种横向激发的任意线偏振高斯光束,该光束场量的模与传统的任意线偏振高斯光束具有相同的模,在源场区,其满足自由空间无源场的场方程。同时利用瑞利—索末菲衍射积分对该高斯光束的非傍轴传输特性进行了解析研究,给出了空间光强分布、束腰和远场发散角的解析通式,发现该类光束的远场光强呈一平顶空心光束。     

Laser range finder using Gaussian beam range equation

A new range equation for laser range finder using Gaussian beam profile is proposed. Unlike conventional range equations, the proposed equation can be applied to any ranging conditions, regardless of a beam size of incident light upon targets. We also show an operational coefficient for estimating the returned power using the proposed Gaussian beam range equation as an empirical correction factor.     

Arbitrary direction incident Gaussian beam scattering by multispheres

Based on spherical vector wave functions and their coordinate rotation theory,the field of a Gaussian beam in terms of the spherical vector wave functions in an arbitrary unparallel Cartesian coordinate system is expanded.The beam shape coefficient and its convergence property are discussed in detail.Scattering of an arbitrary direction Gaussian beam by multiple homogeneous isotropic spheres is investigated.The effects of beam waist width,sphere separation distance,sphere number,beam centre positioning,and incident angle for a Gaussian beam with two polarization modes incident on various shaped sphere clusters are numerically studied.Moreover,the scattering characteristics of two kinds of shaped red blood cells illuminated by an arbitrary direction incident Gaussian beam with two polarization modes are investigated.Our results are expected to provide useful insights into particle sizing and the measurement of the scattering characteristics of blood corpuscle particles with laser diagnostic techniques.     

Propagation of a flattened Gaussian beam through multi-apertured optical ABCD systems

By expanding the hard-aperture function into a finite sum of complex Gaussian functions, the recurrence propagation formula of a flattened Gaussian beam through multi-apertured optical ABCD systems is derived, and the propagation of a Gaussian beam is regarded as a special case in our theoretical model. The extension to the three-dimensional case is described. Numerical examples of the beam propagation through a multiple aperture-lens system and an aperture-spatial filter are given and compared with those by the straightforward numerical integration of the Collins formula. It is shown that our analytical results give a good trade-off between the computational time and accuracy, and provide a useful tool for simulating the beam propagation through complicated optical systems including multiple apertures and spatial filters. Finally, a comparison with the previous work is made and the main results obtained in this paper are summarized.     

利用汉克尔变换设计高斯光束整形衍射元件的应用研究

衍射光学元件由于可以实现对高斯光束的整形而被重视,其通常的设计方法为G-S算法,由于使用傅里叶变换运算量大、费时长,将快速汉克尔变换应用到这些算法中可以极大地提高运算速度,节省运算时间,为设计复杂的光束整形元件提供了高效、可行的方法。本文利用该种方法设计针对中心波长为775 nm、光束束腰口径为6 cm的激光器,成功设计了一个具有二阶相位的折衍混合光学元件。仅单独这一片元件,既可在距离其35 m处得到一半径为200μm的圆形平顶光斑,均方根误差D0.021。当抽样值取2~15时,在普通PC机上运行时间仅为20.05 s,大大节省了优化设计时间(整个优化设计过程往往需要几十次甚是上百次这种运算)。同时利用离子刻蚀技术加工了该折衍混合元件,并进行了实际测试,结果与设计值基本相符,整形效果较好。这种单片的整形元件不仅整形效果好,还有利于与激光器的集成,简化系统的调节。     

拟合法测量高斯光束的束腰半径

从高斯光束的横向光强分布特性出发,建立了小孔光阑透过功率与孔径的关系式.采用2种不同拟合方法对高斯光束的束腰半径进行了测量.为减小激光器功率不稳定带来的不利影响,实验中采用双光路进行测量.结果表明,用拟合法测量高斯光束的束腰半径不仅合理,而且可行.     

Fresnel diffraction of truncated Gaussian beam

We study the Fresnel diffraction of Gaussian beam truncated by one circular aperture, and give the general analytic expression of the Fresnel diffraction of truncated Gaussian beam denoted by Bessel functions. Then the characteristic of the axial diffraction fluctuation and the influence of the caliber of the circular aperture and the wave waist of Gaussian beam on the diffraction distributions are discussed, respectively. Through the numerical calculations, the characteristics of the transverse diffraction are presented and the relationship of the fluctuation of the transverse diffraction profile and the position of the axial point is shown. The physical origin of the fluctuation of Fresnel diffraction intensities of truncated Gaussian beam is expressed in terms of Fresnel half-zone theory. These phenomena and the conclusions are important for the measurement of the parameters of the beam and its applications.     

Propagation characteristics of TM Gaussian beam

The propagation characteristics of TM polarized Gaussian beam, which is the rigorous solution of an eigenfunction problem for a confocal resonator, have been investigated using the nonparaxial vectorial moment theory of light beam propagation. The analytical expressions of the beam propagation factors are given by means of Fourier transform. Both the transversal second-order moment beam widths follow a simple hyperbolic variational law. For nonparaxial case, however, beam has different propagating features in the two transversal directions. As to paraxial case, its propagation approximately reduces to that of scalar Gaussian beam TEM₀₀ mode.