Characterization of CdS nanoparticles in solutions of P(TFE-co-PVDF-co-Prop)/N,N-dimethylformamide

We report in here the preparation of CdS nanoparticles (Q-CdS) in N,N-dimethylformamide (DMF) and poly(tetrafluoroethylene-co-vinylidenefluoride-co-propylene) (PTFE-co-PVDF-co-Prop) by reaction of cadmium acetate and thiourea at room temperature. The formation and size evolution of Q-CdS particles were followed by optical absorption spectroscopy as a function of the aging process of the solutions. The obtained results indicated that not only the Q-CdS particles were more stable in DMF than in aqueous solutions, probably due to the interaction with the CHNO group, but also they were formed in smaller sizes. The particle size obtained in DMF was estimated in 4-6 nm against 10-20 nm in aqueous solution. The results also showed that the velocity of Q-CdS formation is lower when the reaction was carried out in PTFE-co-PVDF-co-Prop dissolved in DMF. The Q-CdS particles formed in this system were also less stable than in pure DMF, probably due to the interaction of the CHNO fragment and CF₂ of polymer chain or phase segregation.     

N-(Benzoyloxy)amines: an investigation of their thermal stability, synthesis, and incorporation into novel peptide constructs

A series of N-benzoyloxyamines were pyrolyzed and their decomposition temperatures correlated well with the amine architecture's ability to stabilize a N-centered radical. A variety of amine substrates were treated with a biphasic mixture of benzoyl peroxide (BPO), CH₂Cl₂ and an aqueous carbonate buffer (at pH 10.5). Primary and secondary amines were successfully N-benzoyloxylated in good yield. Tertiary amines and BPO gave low yields of the corresponding N-oxide and complex product mixtures, presumably via radical decomposition. Electron deficient amines (such as fluorinated aliphatic amines, α-aminoacids, α-aminoesters, and α-aminoamides) were not N-benzoyloxylated under these conditions. Instead, N-benzoylation was observed with the fluorinated amines and the reaction was sensitive to temperature and the pH of the aqueous medium. A one-pot-two-step synthesis of N^α-FMOC-l-Leu-N^β-(benzoyloxy)-β-alanine ethyl ester, a peptide containing both an α- and a novel β-amino acid framework, was also developed.     

Study of some properties of poly(N-vinyl imidazole) partially quaternized with n-butyl bromide aqueous solutions

This paper presents a study of the properties of aqueous solutions of poly(N-vinyl imidazole) quaternized with n-butyl bromide (PVIQ3). The influence of the temperature and polymer concentration on refractive index, electrical conductivity and surface tension was studied. The critical micelar concentration of PVIQ3 in aqueous solution was determined and correlated with the polymer solubility in water.All the PVIQ3 aqueous solutions properties were compared with those of poly(N-vinyl imidazole) (PNVI) and the influence of the quaternization process on the polymer properties was evidenced.     

Synthesis of N,N-Ac,Boc laurylthio sialoside and its application to O-sialylation

The combination of the 5-N-tert-butoxycarbonyl (Boc) group of laurylthio sialoside and cyclopentyl methyl ether (CPME) as a solvent enhanced the reactivity and α-selectivity of the sialyl donor during sialylation. Selective deprotection of the N-Boc group of sialoside, including an acid-sensitive isopropylidene function, was successfully achieved by Yb(OTf)₃-SiO₂. Transformation of N,N-Ac,Boc into an N-acetylglycolyl group of sialoglycoside was easily performed via selective N-deacylation of the mixed Ac-N-Boc carbamate, subsequent Boc group removal, and acylation.     

Investigation of the degradation behaviour of poly(ethylene glycol-co-d,l-lactide) copolymer

The aim was to investigate the degradation behaviour of poly(ethylene glycol-co-d,l-lactide) (PEG-d,l-PLA) multiblock copolymer, in bulk and as microspheres, in aqueous medium. The degradation behaviour of PLA homopolymers in bulk and microspheres was evaluated as comparison.Microsphere preparation was performed by the double emulsion solvent evaporation method. Physical-chemical characterization of the raw polymers and the microspheres was performed by nuclear magnetic resonance (NMR) and modulated differential scanning calorimetry (MDSC). Polymer molecular weight, before and after incubation in aqueous environment, was evaluated by GPC; water uptake and mass loss were determined gravimetrically.The presence of PEG segments inside PLA chains gave a characteristic spongy structure to the microspheres. A significant increase in polymer T_g values was found for the microsphere formulations compared to polymer in bulk. After 63 days of incubation in the aqueous environment, the PEG-d,l-PLA microspheres achieved an average M_w reduction of 47% compared to 20% for PLA microspheres. The corresponding M_w decrease of the polymers in bulk was significantly higher: 72% and 41% for PEG-d,l-PLA and PLA, respectively.The data show how the degradation behaviour of polymer in bulk in an aqueous environment is significantly different from the behaviour of the corresponding microspheres. These results highlight the importance of performing a thorough physical-chemical characterization on microsphere formulations.     

Photoacid generators (PAGs) based on N-acyl-N-phenylhydroxylamines for carboxylic and sulfonic acids

Simple and efficient photoacid generators (PAGs) for carboxylic and sulfonic acids based on N-acyl-N-phenylhydroxylamines have been demonstrated. Irradiation of o-carboxylates and thermally rearranged o-arenesulfonates of N-acyl-N-phenylhydroxylamines using UV light (≥254 nm) in aqueous methanolic solution resulted in efficient generation of carboxylic and sulfonic acids, respectively. The carboxylic acid generation ability of N-acyl-N-phenylhydroxylamines was found to be dependent on their N-acyl substituents. Further, polymer bearing o-arenesulfonates of N-acyl-N-phenylhydroxylamine was synthesized and demonstrated as PAG for sulfonic acids.     

Polyisobutylene-supported N-heterocyclic carbene palladium catalysts

This paper describes how the nonpolar polymer polyisobutylene (PIB) can be used as a handle to prepare PIB-bound NHC ligands that are soluble in monophasic mixtures of mixed solvents but phase separable when such solvent systems are perturbed to be biphasic. The results here show that such PIB-bound NHC ligands can be used to synthesize useful palladium catalysts. In this paper, both PIB-bound analogs of an N,N′-bis(2,6-diisopropylphenyl) heterocyclic carbene and simpler N,N′-dialkyl heterocyclic carbene ligand were prepared and were successfully used to form palladium cross-coupling catalysts. The reactivity, recycling and reusability of these catalysts has been examined.     

Influence of the Molecular Mass of Poly(<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone) on Formation of Cu<Subscript>2</Subscript>O Nanoparticles During Reduction of Divalent Copper Ions with <Emphasis Type="Italic">tert</Emphasis>-Butylamine Borane in Polymer Solution

The process of reduction of divalent copper ions with tert-butylamine borane in dilute aqueous solutions of poly(N-vinylpyrrolidone) is investigated. The influence of polymer molecular mass on properties of the resultant Cu₂O sols is studied. It is shown that Cu₂O nanoparticles with an average diameter of 6–8 nm independent of polymer molecular mass and a relatively narrow size distribution of particles are formed in the systems under study. The contour length of macromolecules and the hydrodynamic diameter of a poly(N-vinylpyrrolidone) macromolecular coil are compared with the diameter of Cu₂O particles. Poly(N-vinylpyrrolidone) with M ≥ 1 × 10⁴ can be used to produce Cu₂O nanoparticles. Poly(N-vinylpyrrolidone) with M > 4 × 10⁴ should be used for the formation of long-living Cu₂O sols.     

Selective permeation of CO2 through poly 2-(N,N-dimethyl)aminoethyl methacrylate membrane prepared by plasma-graft polymerization technique

A membrane having an amine moiety was prepared by plasma-grafting 2-(N,N-dimethyl)aminoethyl methacrylate (DAMA) onto a microporous polyethylene substrate. Permselectivity of the membrane for CO₂ over N₂ was achieved in both dry and water swollen conditions. When the CO₂ partial pressure in the feed gas was 0.047 atm, the selectivity of CO₂ over N₂ reached 130 for the highly swollen water containing membrane. This value was found to agree with that obtained with a mobile carrier membrane (supported liquid membrane) using DAMA as the carrier. The effects of several experimental conditions such as degree of grafting, feed partial pressure and temperature on the membrane performance were studied. It was suggested that the membrane acted as a fixed carrier membrane for CO₂ facilitated transport in under the dry condition and acted as a fixed reaction site membrane in the water swollen condition. The carrier transport mechanism is discussed for dry and aqueous membranes.     

Novel generation of selenoaldehydes through stannic chloride-induced unsymmetrical C-Se bond cleavage of bis(N,N-dimethylcarbamoylseleno)methanes

Treatment of a benzene or a CH₂Cl₂ solution of bis(N,N-dimethylcarbamoylseleno)methanes with SnCl₄ afforded β-1,3,5-triselenanes, and the key intermediates, acylselonium ions and selenoaldehydes, were successfully trapped by using allyltrimethylsilane or 2,3-dimethyl-1,3-butadiene to obtain the allylation products or the cycloadducts, respectively.     

Swellable molecularly imprinted polyN-(N-propyl)acrylamide particles for detection of emerging organic contaminants using surface plasmon resonance spectroscopy

Lightly crosslinked theophylline imprinted polyN-(N-propyl)acrylamide particles (ca. 300 nm in diameter) that are designed to swell and shrink as a function of analyte concentration in aqueous media were spin coated onto a gold surface. The nanospheres responded selectively to the targeted analyte due to molecular imprinting. Chemical sensing was based on changes in the refractive index of the imprinted particles that accompanied swelling due to binding of the targeted analyte, which was detected using surface plasmon resonance (SPR) spectroscopy. Because swelling leads to an increase in the percentage of water in the polymer, the refractive index of the polymer nanospheres decreased as the particles swelled. In the presence of aqueous theophylline at concentrations as low as 10⁻⁶ M, particle swelling is both pronounced and readily detectable. The full scale response of the imprinted particles to template occurs in less than 10 min. Swelling is also reversible and independent of the ionic strength of the solution in contact with the polymer. Replicate precision is less than 10⁻⁴ RI units. By comparison, there is no response to caffeine which is similar in structure to theophylline at concentrations as high as 1 × 10⁻² M. Changes in the refractive index of the imprinted polymer particles, as low as 10⁻⁴ RI units could be readily detected. A unique aspect of the prepared particles is the use of light crosslinking rather than heavy crosslinking. This is a significant development as it indicates that heavy crosslinking is not entirely necessary for selectivity in molecular imprinting with polyacrylamides.     

Thermal degradation of [poly(N-vinylimidazole)-polyacrylic acid] interpolymer complexes

Interpolymer complexes of a slightly basic polymer, poly(N-vinylimidazole) (PVIm) with a strongly acidic polymer, poly(acrylic acid) (PAA) have been prepared by mixing aqueous solutions of the respective components. Spectroscopy and thermal methods were used to reveal interaction between VIm and AA moieties. FT-IR analysis showed that the nitrogen atoms at 3rd position of imidazole ring are involved in strong H-bonding with acid groups of PAA leading to a uniform and fully miscible complex structure. As the quantity of PAA increases the thermal stability of complex increases based on TG results. In the DSC analyses, the single T_g for all IPC samples showed that IPCs have good or definite miscibility over the whole range of composition as a result of H-bond formation between acrylic acid and imidazole units.     

Thermosensitive and control release behavior of poly(N-isopropylacrylamide-co-acrylic acid)/nano-Fe3O4 magnetic composite latex particle that is synthesized by a novel method

In this study, a novel method was used to synthesize the poly(N-isopropylacrylamide-co-acrylic acid)/Fe₃O₄ (poly(NIPAAm-AA)/Fe₃O₄) magnetic composite latex. The crosslinked poly(NIPAAm-AA) polymer latex particles were first synthesized by the method of soapless emulsion polymerization, then Fe²⁺ and Fe³⁺ ions were introduced to bond with the -COOH groups of AA segments in poly(NIPAAm-AA) polymer latex particles. Further by a reaction with NH₄OH, Fe₃O₄ nanoparticles were generated in situ. The concentrations of acrylic acid (AA), crosslinking agent (N,N′-methylene bisacrylamide (MBA)), and Fe₃O₄ nanoparticles were important factors to influence the morphology and lower critical solution temperature (LCST) of poly(NIPAAm-AA)/Fe₃O₄ magnetic composite latex particles. The poly(NIPAAm-AA)/Fe₃O₄ latex particles were used as a thermosensitive drug carrier to load caffeine. The control release of caffeine was studies. Morphology-based schematic models were proposed to explain the control release behavior of the composite particles with different compositions. Moreover, the protein (albumin, acetylated from bovine serum (BSA)) was bound on the surface of poly(NIPAAm-AA)/Fe₃O₄ composite latex particles. The effects of AA, crosslinking agent and Fe₃O₄ contents on the amount of BSA binding were investigated at different temperatures and pH values. The composition-morphology-BSA conjugation relationship was established.     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

Me3SiCl-promoted intramolecular cyclization of aromatic compounds tethered with N,O-acetals leading to the facile preparation of 1,4-benzodiazepine skeletons

The Me₃SiCl-promoted intramolecular aminomethylation of a novel type of N,O-acetals, which were prepared via a facile three-step synthesis from N-alkylaniline derivatives and N-alkyl-2-oxazolidinones that leads to the production of pharmaceutically useful 1,4-benzodiazepine skeletons with a variety of functional groups is described. This method was successfully applied to the facile preparation of both tricyclic benzodiazepine derivatives and a 1,4-benzoxazepine derivative via 7-exo-trig cyclization.     

Preparation and photocatalytic degradability of TiO2/polyacrylamide composite

Based on the unique absorbent characters and three-dimensional network structure of polyacrylamide (PAM) superabsorbent polymer, a photocatalytic degradable TiO₂/PAM composite was synthesized by an aqueous solution polymerization method with N,N′-methylene bisacrylamide as crosslinker, potassium peroxydisulfate as initiator, acrylamide as monomer, and TiO₂ (P-25) as functional filler. The photocatalytic degradability of the composite was evaluated using methyl orange as photodegradation target, and the recovery and reproducibility of the composite was investigated. It was found that TiO₂/PAM composite had a good photocatalytic degradability, the composite also possessed a good reproducibility of photocatalytic degradability, which is possible to be used in practical process.     

ESR and pH-potentiometric study of the mixed-ligand complex formation in the copper(II)-4-fluorosalicylic acid-N,N-diethylnicotinamide system: Structure and spectral properties of [Cu(4-fluorosalicylate)2(N,N-diethylnicotinamide)2(H2O)2] complex

EPR simulation method together with pH-potentiometry combined with UV-Vis spectrophotometry were used for the study of the ternary system 4-fuorosalicylic acid (HA)-N,N-diethylnicotinamide (B)-copper(II) in aqueous solution. The N,N-diethylnicotinamide ligand is a weak donor, its mixed-ligand complexes with 4-fluorosalicylate anions are more favoured. The number of coordinated N,N-diethylnicotinamide molecules increases with decreasing temperature: up to four ones were detected in the coordination sphere of copper(II) in frozen solutions. The formation of [CuH₋₁AB₂] and [CuH₋₁A] was detected by all methods at neutral pH. At lower pH values, [CuA₂B₂] and [CuB] become dominant, and this fact is in good agreement with [CuA₂B₂(H₂O)₂] crystals obtained from similar solutions. The structural unit of the [CuA₂B₂(H₂O)₂] complex consists of a copper(II) ion, which is monodentately coordinated by a pair of 4-fluorosalicylate anions and by a pair of N,N-diethylnicotinamide in trans positions in the basal plane, and by two water molecules in the axial positions of a tetragonal bipyramid.     

BF3·Et2O catalyzed diastereoselective nucleophilic reactions of 3-silyloxypiperidine N,O-acetal with silyl enol ether and application to the asymmetric synthesis of (+)-febrifugine

The asymmetric BF₃·Et₂O catalyzed nucleophilic reactions of 3-silyloxypiperidine N,O-acetal 10 with silyl enol ethers derived from ketones are described. (+)-Febrifugine 1, an antimalarial alkaloid, was successfully synthesized based on this nucleophilic substitution. In addition, N,O-acetal 10 was synthesized from l-benzyl glutamate in 11 steps.     

Apparent molar volumes and apparent molar heat capacities of aqueous N-acetyl-d-glucosamine at temperatures from 278.15 K to 368.15 K and of aqueous N-methylacetamide at temperatures from 278.15 K to 393.15 K at the pressure 0.35 MPa

We determined apparent molar volumes V_? from densities measured with a vibrating-tube densimeter at 278.15 ? (T/K) ? 368.15 and apparent molar heat capacities C_p,? with a twin fixed-cell, differential, temperature-scanning calorimeter at 278.15 ? (T/K) ? 363.15 for aqueous solutions of N-acetyl-d-glucosamine at m from (0.01 to 1.0) mol · kg⁻¹ and at p = 0.35 MPa. We also determined V_? at 278.15 ? (T/K) ? 368.15 and C_p,? at 278.15 ? (T/K) ? 393.15 for aqueous solutions of N-methylacetamide at m from (0.015 to 1.0) mol · kg⁻¹ and at p = 0.35 MPa. Empirical functions of m and T for each compound were fitted to our results, which are then compared to those for N,N-dimethylacetamide. Estimated values of Δ_rV_m(m, T) and Δ_rC_p,m(m, T) for formation of aqueous N-acetyl-d-glucosamine from aqueous d-glucose and aqueous acetamide are calculated and discussed.     

A practical approach to non-natural or N-unsubstituted α-arylglycine derivatives: Hf(OTf)4-doped Me3SiCl system-catalyzed aminomethylation of electron-rich arenes with a new type of N,O-acetal

The authors have demonstrated the Hf(OTf)₄-doped Me₃SiCl system-catalyzed aminomethylation of electron-rich aromatic compounds, such as indoles and anilines, with new types of N,O-acetals having a variety of functional groups, such as cyano, ester, bis(trimethylsilyl)amino, diallylamino, and cyclic amino moieties, for the preparation of non-natural aromatic amino acid derivatives. Aminomethylation using an N,O-acetal with a bis(trimethylsilyl)amino group was particularly successful in the direct preparation of an N-unsubstituted α-indolylglycine derivative, which required only a standard aqueous workup.