Synthesis, characterization and intercalation property of layered zirconium benzylamino-N,N-dimethylphosphonate phosphate materials

Layered zirconium benzylamino-N,N-dimethylphosphonate phosphate (ZBMPA) was prepared by the reaction of zirconyl chloride with benzylamino-N,N-dimethylphosphonic acid (H₂BMPA) and phosphoric acid in the presence of hydrofluoric acid. The intercalation of n-alkylamines (n-butylamine, n-heptylamine and n-decylamine) into ZBMPA was primarily investigated at room temperature. These materials were characterized by elemental analysis, ICP, XRD, SEM, FT-IR, Raman spectra, TG and DSC. The composition of ZBMPA is Zr(HPO₄)(C₆H₅CH₂N(CH₂PO₃)₂)_0.5 · 2.0H₂O. The interlayer distance of ZBMPA, n-butylamine, n-heptylamine and n-decylamine intercalation compounds is 2.03, 2.58, 2.52 and 3.17 nm, respectively. ZBMPA and the n-alkylamine intercalation compounds are different in the morphology and vibration spectra. Thermogravimetries of all materials obtained reveal three step mass losses at temperatures of up to 1000 °C. These results indicate that n-alkylamines are intercalated into the galleries of host ZBMPA.     

Catalytic photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine and carbon dioxide

Photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine (TMB) in MeCN under bubbling of CO₂ proceeded with high catalytic efficiency, giving 3,3-diphenylacrylic acid (DPA) and 3-hydroxy-3,3-diphenylpropionic acid (20). The turnover number (TON=(DPA+20)/TMB) reached 17. Similarly, 1-phenyl-1-cyclohexene yielded cis-2-acetamido-2-phenylcyclohexanecarboxylic acid with TON 5.9. As compared with related N,N-dimethylaniline derivatives, TMB is more resistant to photodecomposition, has the much larger absorbance in the S₀→S₁ transition, and has the lower quenching efficiency by CO₂. Probably these factors are partly responsible for the high TON observed for TMB.     

The calorimetric investigation of phosphoric acid-N,N-dimethylformamide system

Solution and mixing enthalpies for the orthophosphoric acid (H₃PO₄)-N,N-dimethylformamide (DMF) system were measured over the whole concentration range at 25 °C. The standard value of solution enthalpy of phosphoric acid in DMF and the standard transference enthalpy of H₃PO₄ from water to DMF were calculated. The mixing enthalpy concentration dependence permitted making assumptions on complex formation in the system under investigation.     

Substituted tubaic acids, new oxidative rotenoid metabolites from Lonchocarpus nicou

A lipophile extract of Lonchocarpus nicou roots afforded two likely O-substituted isomers of the known tubaic acids. Spectroscopic analysis assigned to the former, named (−)-rotoic acid, the new 4-(2,3-dihydro-6,7-dimethoxychromon-3-oxy) tubaic acid structure which differs from (−)-deguoic acid, the latter, by the β-tubaic acid part. Biogenetically, the two compounds could be considered as resulting from the parent rotenone and deguelin, respectively, by oxidative ring-C cleavage.     

Microbial reduction of coumarin, psoralen, and xanthyletin by Glomerella cingulata

Microbial transformation of coumarin, psoralen, and xanthyletin was performed with the fungus Glomerella cingulata. The main reaction pathways involved reduction at α,β-unsaturated δ-lactone ring on coumarin analogue. Coumarin was metabolized by G. cingulata to give the corresponding reduced acid, hydrocoumaric acid. In the biotransformation of psoralen, two reduced metabolites, 6,7-furano-hydrocoumaric acid, and 6,7-furano-o-hydrocoumaryl alcohol were isolated from the incubation of psoralen. Xanthyletin was converted to reduced products 9,9-dimethyl-6,7-pyrano-hydrocoumaric acid and 9,9-dimethyl-6,7-pyrano-o-hydrocoumaryl alcohol by G. cingulata. The structures of the new compounds were characterized using spectroscopic techniques. In addition, all of compounds including methyl ester derivatives of the metabolites were tested for the β-secretase (BACE1) inhibitory activity in vitro. 6,7-Furano-hydrocoumaric acid methyl ester was shown to possess BACE1 inhibitory activity, and an IC₅₀ value was 0.84 ± 0.06 mM.     

Dibutylphosphate (DBP) mediated synthesis of cyclic N,N′-disubstituted urea derivatives from amino esters: a comparative study

The N,N′-disubstituted urea derivatives such as amino acid hydantoins and dihydrouracil derivatives were prepared starting from natural and unnatural amino acid esters using dibutylphosphate (DBP). During the attempted synthesis of N-heterocycles with larger than six-membered rings containing the N,N′-disubstituted urea functionalities, three unexpected products namely squamolone, N-methyl pyrrolidine-2-one, and diketopiperazine were isolated.     

Isolation, characterisation and synthesis of an insecticidal tetramethyltetrahydrochromenedione-spiro-bicyclo[3.1.1]cycloheptane from two species of Myrtaceae

A new moderately insecticidal compound, named ficifolidione, has been isolated from the hexane extract of the aerial parts of two species of Myrtaceae, Eucalyptus ficifolia and Kunzea ericoides. Its structure, (1′R,2′R,4R)-4-isobutyl- 6,6,8,8-tetramethyl-2,3,4,8-tetrahydrochromene-5,7-dione-2-spiro-2′-6,6-dimethyl-bicyclo[3.1.1]heptane (1), was confirmed by synthesis from syncarpic acid, isovaleraldehyde and (1S)-β-pinene.     

Enantioselective synthesis of m-carboranylalanine, a boron-rich analogue of phenylalanine

The enantiomers of the highly lipophilic α-amino acid m-carboranyl-alanine [3-(1,7-dicarba-closo-dodecaborane(12)-1-yl)-2-aminopropanoic acid], a carborane containing analogue of phenylalanine, have been synthesised via hydroxyamination of the N-acyl derivative formed from 3-(m-carboranyl)propionic acid [3-(1,7-dicarba-closo-dodeca-borane(12)-1-yl)-2-propanoic acid] and Oppolzer's camphor sultam. The enantiomeric excess of both enantiomers of the amino acid was >98%. (S)-Configuration was assigned to the (+)-enantiomer (CH₃OH, 589 nm).     

Synthesis of cyclic bis(3′-5′)diguanylic acid (c-di-GMP) analogs

This paper reports the synthesis of cyclic bis(3′-5′)diguanylic acid (c-di-GMP) analogs, including the monophosphorothioic acid of c-di-GMP (c-GpGps), cyclic bis(3′-5′)guanylic/adenylic acid (c-GpAp), and cyclic bis(3′-5′)guanylic/inosinic acid (c-GpIp). These compounds are expected to be important, both in elucidating the mechanism of bioactive c-di-GMP and in designing and creating new bioactive c-di-GMP-related artificial derivatives.     

Determination of methanol in o,o-dimethyldithiophosphoric acid (DMDTPA) of technical grade by UV/vis spectrophotometry and by HPLC

Two procedures are proposed in this work for the determination of methanol impurities in o,o-dimethyldithiophosphoric acid (DMDTPA). To avoid possible interferences from the main component, DMDTPA was precipitated in the form of insoluble lead complex. Free Pb(II) ions were eliminated with sulfuric acid and methanol was oxidized to formaldehyde with potassium permanganate in methanesulfonic acid medium. Finally, the excess of oxidizing agent was neutralized with saturated sodium oxalate. The above pretreatment procedure was identical for spectrophotometric assay and for chromatographic determination. In the first case, the solution obtained was treated with Nash reagent to form 3,5-diacetyl-1,4-dihydrolutidine (λ_max = 415 nm). In the calibration range 0.1-1.0% (methanol in DMDTPA), the analytical figures of merit were: R² = 0.9993, quantification limit 0.02% methanol in DMDTPA coefficient of variance (n = 5) for 0.1% and 0.4% methanol respectively 6.7% and 2.4%. Recoveries obtained in the sample fortified with 0.1, 0.2, 0.4% of methanol (in DMDTPA) were in the range 99-105%. For chromatographic procedure, formaldehyde was derivatized with 2,4-dinitrophenylhydrazine and separation was achieved on Luna C18(2) column using the isocratic elution with acetonitrile-water (70:30, v/v) and spectrophotometric detection at 360 nm. In the calibration range 0.05-0.25% (methanol in DMDTPA), R² was always higher than 0.999, the quantification limit was 0.004% and the recoveries in these same fortified samples in the range 98-101%. No statistically significant differences were observed between the results obtained in the analysis of technical grade DMDTPA by the two procedures (ANOVA, p < 0.05)     

Determination of ethylenediaminetetraacetic acid, ethylenediaminedisuccinic acid and iminodisuccinic acid in cosmetic products by capillary electrophoresis and high performance liquid chromatography

A capillary electrophoresis (CE) and a high performance liquid chromatography (HPLC) method are described for the simultaneous determination of ethylenediaminetetraacetic acid (EDTA), S,S′-ethylenediaminedisuccinic acid (EDDS) and R,S-iminodisuccinic acid (IDS) complexing agents as their Fe(III) complexes in cosmetics like shower cream and foam bath. The non-biodegradable EDTA is used in combination with biodegradable analogues like EDDS and IDS in many commercial products. The HPLC method involves separation by reversed-phase ion pair chromatography on a C₁₈ column using methanol-formate buffer (20 mM tetrabutylammonium hydrogen sulfate, 15 mM sodium formate adjusted to pH 4.0 with formic acid) (10:90, v/v) as mobile solvent at a flow rate of 0.8 mL min⁻¹ at 24 °C using UV detection at 240 nm. The CE separation was performed in a fused silica capillary of 50 μm i.d. with the total length of 50 cm with a 10 mM MES and MOPSO (pH 5.5) at an applied voltage of −25 kV. The samples were introduced by applying a 50 mbar pressure for 2 s. Absorbances at 215 and 225 nm were monitored for the detection of the complexes. The methodology performance of the two methods was evaluated in terms of linearity, limit of detection (LOD), limit of quantitation (LOQ) and reproducibility. The LOD values obtained from HPLC are low when compared with CE. The applicability of both the methods was demonstrated for the analysis of cosmetic products such as shower cream and foam bath. The results obtained by both CE and HPLC were found to be comparable and in good agreement.     

A novel P,S-heterodonor ligand and palladium(0) complex catalyzed Suzuki cross-coupling reaction

Axially dissymmetric P,S-heterodonor ligand L3 synthesized from BINOL is an effective promoter in the palladium(0)-catalyzed Suzuki cross-coupling reaction of phenylboronic acid with aryl bromides and iodide at 60-80 °C. On the basis of ¹³C and ³¹P NMR spectroscopic investigation and X-ray diffraction, it was revealed that N,N-dimethylthiocarbamate-phosphine ligand L3 might be a P,S-heterodonor bidentate ligand to palladium(0) center.     

Diapolycopenedioic acid xylosyl ester, a novel glyco-C30-carotenoic acid produced by a new marine bacterium Rubritalea squalenifaciens

A novel acyl glyco-carotenoic acid, diapolycopenedioic acid xylosyl ester, was isolated from a marine bacterium Rubritalea squalenifaciens belonging to subdivision 1 of Verrucomicrobia as the major red pigment by using chromatographic methods. The structure of diapolycopenedioic acid xylosyl ester was determined to be 4-[2-O-(12-methyltridecanoyl)-β-xylopyranosyl] hydrogen 4,4′-diapo-ψ,ψ-carotene-4,4′-dioate by analysis of the MS and NMR data for this acid and for the diacetyl diapolycopenedioic acid xylosyl ester. The diapolycopenedioic acid xylosyl ester showed potent antioxidative activity against a lipid peroxidation model.     

3,3-Bis(3,5-dimethylpyrazol-1-yl)propionic acid: A tripodal N,N,O ligand for manganese and rhenium complexes - Syntheses and structures

The tripodal N,N,O ligands 3,3-bis(3,5-dimethylpyrazol-1-yl)propionic acid (Hbdmpzp) (1) and 3,3-bis(pyrazol-1-yl)propionic acid (Hbpzp) (2) form the “missing link” between the well-known bis(pyrazol-1-yl)acetic acids and related ligands with a longer “carboxylate arm”. To illustrate the reactivity of this ligand, manganese and rhenium complexes bearing the ligand bdmpzp are reported. The complexes are compared to related compounds bearing other tripod ligands such as bis(3,5-dimethylpyrazol-1-yl)acetate (bdmpza) and 3,3-bis(1-methylimidazol-2-yl)propionate (bmip). Spectroscopic and structural data are used as a basis for comparison, as well as DFT calculations. Both ligands 1 and 2 and the complexes fac-[Mn(bdmpzp)(CO)₃] (3) and fac-[Re(bdmpzp)(CO)₃] (4) were characterised by X-ray crystallography.     

Use of molybdate as novel complex-forming selector in the analysis of polyhydric phenols by capillary zone electrophoresis

Molybdate was examined as a complex-forming additive to the CE background electrolytes (BGE) to affect the selectivity of separation of polyhydric phenols such as flavonoids (apigenin, hyperoside, luteolin, quercetin and rutin) and hydroxyphenylcarboxylic acids (ferulic, caffeic, p-coumaric and chlorogenic acid). Effects of the buffer concentrations and pH and the influence of molybdate concentration on the migration times of the analytes were investigated. In contrast to borate (which is a buffering and complex-forming agent generally used in CE at pH ≥9) molybdate forms more stable complexes with aromatic o-dihydroxy compounds and hence the complex-formation effect is observed at considerably lower pH. Model mixtures of cinnamic acid, ferulic acid, caffeic acid and 3-hydroxycinnamic acid were separated with 25 mM morpholinoethanesulfonic acid of pH 5.4 (adjusted with Tris) containing 0.15 mM sodium molybdate as the BGE (25 kV, silica capillary effective length 45 cm × 0.1 mm I.D., UV-vis detection at 280 nm). With 25 mM 2-hydroxy-3-[4-(2-hydroxyethyl)-1-piperazinyl]propanesulphonic acid/Tris of pH^* 7.4 containing 2 mM sodium molybdate in aqueous 25% (v/v) methanol as the BGE mixtures of all the above mentioned flavonoids, p-coumaric acid and chlorogenic acid could be separated (the same capillary as above, UV-vis detection at 263 nm). The calibration curves (analyte peak area versus concentration) were rectilinear (r > 0.998) for ≈8-35 μg/ml of an analyte (with 1-nitroso-2-naphthol as internal standard). The limit of quantification values ranged between 1.1 mg l⁻¹ for p-coumaric acid and 2.8 mg l⁻¹ for quercetin. The CE method was employed for the assay of flavonoids in medicinal plant extracts. The R.S.D. values ranged between 0.9 and 4.7% (n = 3) when determining luteolin (0.08%) and apigenin (0.92%) in dry Matricaria recutita flowers and rutin (1.03%) and hyperoside (0.82%) in dry Hypericum perforatum haulm. The recoveries were >96%.     

Synthesis and pharmacological evaluation of 6a,7-dihydro-6H,13H-pyrazino[1,2-a;4,5-a′]diindole analogs as melatonin receptor ligands

The synthesis of two melatonin-derived analogs of the novel 6a,7-dihydro-6H,13H-pyrazino[1,2-a;4,5-a′]diindole ring system is described. The non-methoxy and methoxy analogs, 4a and 4b were prepared in seven steps starting from indoline-2-carboxylic acid 5a and 5-methoxyindoline-2-carboxylic acid 5b, respectively. While 4a exhibited micromolar affinities for both melatonin receptors, the methoxy analog 4b displayed moderate affinity for MT₂ receptors (K_i=0.41 μM) being 4.4-fold higher than for the MT₁ subtype.     

Validation of an online dual-loop cleanup device with an electrospray ionization tandem mass spectrometry-based system for simultaneous quantitative analysis of urinary benzene exposure biomarkers trans, trans-muconic acid and S-phenylmercapturic acid

The aim of this study is to validate isotope-dilution electrospray ionization tandem mass spectrometry (ESI-MS-MS) method with a dual-loop cleanup device for simultaneous quantitation of two benzene metabolites, trans, trans-muconic acid (ttMA) and S-phenylmercapturic acid (SPMA), in human urine. In this study, a pooled blank urine matrix from rural residents was adopted for validation of the analytical method. The calibration curve, detection limit, recovery, precision, accuracy and the stability of sample storage for the system have been characterized. Calibration plots of ttMA and SPMA standards spiked into two kinds of urine matrixes over a wide concentration range, 1/32-8-fold biological exposure indices (BEIs) values, showed good linearity (R > 0.9992). The detection limits in pooled urine matrix for ttMA and SPMA were 1.27 and 0.042 μg g⁻¹ creatinine, respectively. For both of ttMA and SPMA, the intra- and inter-day precision values were considered acceptable well below 25% at the various spiked concentrations. The intra- and inter-day apparent recovery values were also considered acceptable (apparent recovery >90%). The ttMA accuracy was estimated by urinary standard reference material (SRM). The accuracy reported in terms of relative error (RE) was 5.0 ± 2.0% (n = 3). The stability of sample storage at 4 or −20 °C were assessed. Urinary ttMA and SPMA were found to be stable for at least 8 weeks when stored at 4 or −20 °C. In addition, urine samples from different benzene exposure groups were collected and measured in this system. Without tedious manual sample preparation procedure, the analytical system was able to quantify simultaneously ttMA and SPMA in less than 20 min.     

Purification, cloning and expression of an Aspergillus niger lipase for degradation of poly(lactic acid) and poly(ε-caprolactone)

A lipase from Aspergillus niger MTCC 2594 was purified 53.8-fold to homogeneity by hydrophobic interaction chromatography using octyl sepharose and the enzyme showed two protein bands with apparent molecular mass of 35 and 37 kDa respectively. The lipase exhibited maximum activity at pH 7.0 and 37 °C and was stable between pH 4.0 and 10.0 and temperatures up to 50 °C. The values of K_m and V_max were 3.83 mM and 32.21 μmol/min/mg respectively, using olive oil as substrate. Lipase encoding gene, lipA, coded for 297 amino acid residues with conserved pentapeptide sequence, G-H-S-L-G, was cloned and expressed in Pichia pastoris. Although lipA showed high homology with the known Aspergillus lipases, it exhibited differences in putative lid domain. Both native and recombinant lipases have potential for degradation of poly(lactic acid) and poly(ε-caprolactone), and the present study will serve as a baseline of initial studies for its exploitation in polymer degradation.     

Isolation of secondary metabolites from Hortia oreadica (Rutaceae) leaves through high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) with a two-phase solvent system (hexane–ethanol–acetonitrile–water 10:8:1:1, v/v) was applied to examine the leaves of Hortia oreadica, which afforded the known limonoid guyanin (1), the alkaloids rutaecarpin (2) and dictamnine (6), the dihydrocinnamic acid derivatives methyl 5,7-dimethoxy-2,2-dimethyl-2H-1-benzopyran-6-propanoate (3), 5,8-dimethoxy-2,2-dimethyl-2H-1-benzopyran-6-propanoic acid (4), together with the new E-3,4-dimethoxy-α(3-hydroxy-4-carbomethoxyphenyl)cinnamic acid (5). The recovery of compounds 1–6 was determined by comparison with LC-atmospheric pressure chemical ionization MS/MS data: 66.2%, 93.1%, 102.5%, 101.2%, 99.0% and 84.9%, respectively. Compound 3 showed IC₅₀ of 23.6 μM against Plasmodium falciparum and 15.6 μM against Trypanosoma brucei rhodesienses and was not toxic to KB cells (IC₅₀ > 100 μM).     

Efficient, solventless N-Boc protection of amines carried out at room temperature using sulfamic acid as recyclable catalyst

A simple, rapid, and efficient protocol for the chemoselective N-Boc protection of amines using sulfamic acid as catalyst is described. N-Boc protection of various structurally diverse aliphatic, aromatic, alicyclic, and heterocyclic amines (1°, 2°, 3°) was carried out with (Boc)₂O using sulfamic acid as catalyst (5 mol %) at room temperature under solventless conditions. The advantages of this method are simplicity, shorter reaction times (1-15 min), a cost-effective catalyst, and excellent isolated yields (90-100%); it is also environmentally benign. Moreover, the combined use of ultrasound and sulfamic acid achieves a synergic effect that is especially marked in the N-Boc protection of deactivated (sterically hindered and electron-deficient) amines. The catalyst possesses distinct advantages: ease of handling, cleaner reactions, high activity, and excellent chemoselectivity.