Efficient and selective hydroarylation of propiolic acids and their esters with arenes catalyzed by a PtCl2/AgOTf system

PtCl₂/AgOTf-catalyzed hydroarylation of ethyl propiolate proceeded effectively to give ethyl (2Z)-cinnamate derivatives in good to high yields, without the formation of diethyl (1E,3Z)-4-arylbuta-1,3-diene-1,3-dicarboxylates that was observed in Pd(OAc)₂-catalyzed reaction. Especially, PtCl₂/AgOTf-catalyzed hydroarylation of propiolic acids proceeded effectively to give (2Z)-cinnamic acids exclusively.     

Iron(III)-catalyzed hydroarylation of propiolic acid with activated arenes

FeCl₃/AgOTf-catalyzed hydroarylation of propiolic acid with electron-rich arenes such as mesitylene, tetramethylbenzene, and pentamethylbenzene in trifluoroacetic acid proceeded to give 3-arylpropenoic acids in moderate to high yields. The same reactions with anisole and 1,4-dimethoxybenzene afforded double hydroarylation products, 3,3-diarylpropionic acids.     

Highly selective hydroarylation of propiolic acid derivatives using a PtCl2/AgOTf catalytic system

Hydroarylation of propiolic acid derivatives with arenes in trifluoroacetic acid efficiently proceeded in the presence of PtCl₂/AgOTf catalyst to give cis-cinnamic acid derivatives in good to high yields. This PtCl₂/AgOTf-catalyzed reaction did not afford any 4-arylbuta-1,3-diene-1,3-dicarboxylic acid derivatives formed by Pd(OAc)₂-catalyzed hydroarylation. The specific optimization of the catalytic hydroarylation and application to electron-rich arenes are reported.     

A high hydroarylation activity of K2PtCl4/AgOTf catalyst in the reaction of propiolic acid with unactivated and activated arenes

A mixed catalyst K₂PtCl₄/AgOTf showed the highest activity for hydroarylation of propiolic acid, among palladium and platinum catalysts. This catalyst was effective for hydroarylation with less reactive benzene to give cis-cinnamic acid in good yield. The hydroarylation with toluene gave a higher yield of hydroarylation products than that with benzene and resulted in ortho/para orientation with an almost statistical ratio, suggesting that the result is very close to that of the Friedel-Crafts alkylation with methyl bromide or p-nitrobenzyl chloride. Hydroarylation of propiolic acid with other electron-rich arenes proceeded efficiently in the presence of the K₂PtCl₄/AgOTf catalyst in trifluoroacetic acid forming cis-cinnamic acids in good to high yields. This method was also applied to hydroarylation of ethyl propiolate.     

W(II)-catalyzed hydroarylation of bicyclo[2.2.1]hept-2-ene by simple arenes

The tungsten(II) carbonyl compound (CO)₄W(μ-Cl)₃W(SnCl₃)(CO)₃ has been found to be a very effective catalyst for the hydroarylation of bicyclo[2.2.1]hept-2-ene (norbornene) conducted in arene solution at room temperature. Norbornene adducts with benzene, toluene, para-xylene, and mesitylene have been isolated and their structures have been unambiguously established by means of ¹H and ¹³C NMR spectroscopy. On the basis of ¹H NMR monitoring of several catalytic reactions, a possible mechanism involving coordination of norbornene to the W(II) atom and its activation has been proposed.     

Catalytic hydroarylation of alkynes with arenes in the presence of FeCl3 and AgOTf

Hydroarylation of propiolic acids with various arenes in TFA proceeded efficiently in the presence of FeCl₃/AgOTf catalyst system. In the case of electron-rich arenes, the iron-catalyzed hydroarylation gave cinnamic acids in moderate to high yields. The hydroarylation of phenylacetylene was observed but the catalyst was not effective under the same conditions.     

Pt(II)-catalyzed hydroarylation reaction of alkynes with pyrroles and furans

A Pt(II) catalyst showed a drastic effect on hydroarylation of alkynes with pyrroles and furans compared with Pd(OAc)₂ catalyst. The hydroarylation reactions proceeded smoothly under mild conditions to give double-hydroarylation products in good yields. Mono-adducts were formed only when the second hydroarylation was inhibited by steric hindrance of substrates or low reactivity of the mono-adducts.     

Palladium-catalyzed hydroarylation of alkynes with arylboronic acids

Reaction of symmetrical and unsymmetrical alkynes with arylboronic acids, using PdCl₂ as catalyst source and i-Pr₂NPPh₂ as ligand, afforded trisubstituted alkenes with regioselectivity in good to excellent yields without a common additional acetic acid. Its efficiency has been demonstrated by its good functional groups, high yield and crowded substrates.     

Transition metal catalyzed hydroarylation of olefins using unactivated substrates: Recent developments and challenges

The addition of aromatic C-H bonds across olefin CC bonds (olefin hydroarylation) is an important synthetic methodology for the preparation of alkylated arenes. Traditional methods utilizing Friedel-Crafts catalysts result in a significant waste stream and substantial polyalkyated products. In order to achieve high overall yield of monoalkylated compounds, Friedel-Crafts catalysis must be combined with a second transalkylation catalytic step. Reactions that incorporate substituted olefins are selective for branched products. In addition, the regioselective synthesis of disubstituted alkyl arenes is difficult to achieve. Recent development of transition metal based catalysts provides non-Friedel-Crafts pathways for the production of alkyl arenes. Systems based on Ru(II), Ir(III), and Pt(II) have been developed, and mechanistic studies have begun to provide insight into the details of these catalysts. Herein, we review recently published results in the area of transition metal catalyzed olefin hydroarylation with a comparison of known catalysts and discussion of challenges yet to be overcome.     

Synthesis of symmetrical diarylalkyne from palladium-catalyzed decarboxylative couplings of propiolic acid and aryl bromides under water

Symmetric diarylalkynes were obtained from the decarboxylative coupling reactions of aryl bromides and propiolic acid in water solvent condition. In the presence of phase transfer surfactant C₁₈H₃₇N(CH₃)₃Cl, the catalytic system of both Pd(PPh₃)₂Cl₂/dppb and Pd(TPPMS)₂Cl₂/TPPMS afforded the desired coupled products in good yields.     

Synthesis of Benzo[4,5]thiazolo[2,3-c][1,2,4]triazole Derivatives via C-H Bond Functionalization of Disulfide Intermediates

Many nitrogen- and sulfur-containing heterocyclic compounds exhibit biological activity. Among these heterocycles are benzo[4,5]thiazolo[2,3-c][1,2,4]triazoles for which two main synthetic approaches exist. Here we report a new synthetic protocol that allows the preparation of these tricyclic compounds via the oxidation of a mercaptophenyl moiety to its corresponding disulfide. Subsequent C-H bond functionalization is thought to enable an intramolecular ring closure, thus forming the desired benzo[4,5]thiazolo[2,3-c][1,2,4]triazole. This method combines a high functional group tolerance with short reaction times and good to excellent yields.     

The Friedel-Crafts acylation of aromatic compounds with carboxylic acids by the combined use of perfluoroalkanoic anhydride and bismuth or scandium triflate

Aromatic ketones were synthesized by solventless Friedel-Crafts acylation of anisole, mesitylene, xylenes, and toluene with acetic acid and benzoic acid in the presence of trifluoroacetic anhydride by use of bismuth or scandium triflate at 30 °C. Toluene, benzene, and even deactivated substrate such as chlorobenzene were benzoylated by the combined use of heptafluorobutyric anhydride and bismuth triflate at 75-100 °C. The catalyst could be easily recovered and reused repeatedly for the reaction.     

Polymer-supported gadolinium triflate as a convenient and efficient Lewis acid catalyst for acetylation of alcohols and phenols

A polymer-supported gadolinium triflate (CMPS-IM-Gd) catalyst was prepared from chloromethyl polystyrene (CMPS) resin using a simple and convenient procedure. This polymeric catalyst was used as an efficient Lewis acid catalyst for the acetylation of various alcohols and phenols with acetic anhydride, affording high yields under mild conditions. The reaction was completed in a short period of time with small amounts of the catalyst. The catalyst was reused over 10 times without any significant loss of its catalytic activity.     

Iridium-catalyzed direct ortho-C–H amidation of benzoic acids with sulfonylazides

A mild and efficient iridium-catalyzed ortho-C–H amidation with sulfonyl azides by weakly coordinating carboxylic acid was demonstrated, which provided a novel approach to anthranilic acid derivatives.     

Pd-catalyzed cross-coupling of polyfluoroarenes with cyclic vinyl triflates

<正>~~     

Synthesis of spiroindenyl-2-oxindoles by montmorillonite K-10-catalyzed tandem Friedel-Crafts alkenylation/hydroarylation of propargylic alcohols with sterically hindered and electron-rich arenes

Various spiroindenyl-2-oxindoles have been synthesized in a one-pot reaction from isatin-derived propargylic alcohols with sterically hindered and electron-rich arenes such as 2-phenylindole and 1,3,5-trimethoxybenzene. The reaction involved montmorillonite K-10-catalyzed tandem Friedel-Crafts alkenylation and a following hydroarylation of an allene intermediate.     

Synthesis of 3-sulfonyl coumarins through radical sulfonylation with disulfides under catalyst-free conditions

An efficient and convenient aryl sulfonyl introducing strategy for the synthesis of 3-sulfonyl coumarins via ipso-cyclization/1,2-ester migration from substituted phenyl 3-phenylpropiolates with disulfides and potassium persulfate as sulfonylating reagents was developed, halogen and many other electron-withdrawing or -donating functional groups are tolerated. When naphthalen-1-yl 3-phenylpropiolate was used as a starting material, a spiro compound was obtained via ipso-cyclization.     

Fluorescent properties of coumarins with dual functions constructed by two sequential reactions

A series of coumarins with two aryl moieties was constructed from 3-azide-6-bromocoumarin scaffold by means of two sequential reactions, Huisgen 1,3-cycloaddition and Suzuki-Miyaura coupling reactions. Evaluation of their fluorescence properties indicated that the mode of fluorescent change by substituted group on each aryl group would be different. So this structure could be promising candidates as multi-analyte type fluorescent sensors, whose mode of spectroscopic changes, such as fluorescence intensity, and absorption or fluorescence maximum wavelength, are different for each analyte.     

Synthesis of glycol diesters through the depolymerization of polyethylene glycols with carboxylic acids using a proton-exchanged montmorillonite catalyst

A convenient and sustainable method for the synthesis of glycol diesters was developed through the depolymerization of polyethylene glycols (PEGs) with carboxylic acids using proton-exchanged montmorillonite as an efficient solid acid catalyst. Several functionalized glycol diesters were obtained in good yields from PEGs and readily available carboxylic acids. Upon reaction completion, the catalyst could be easily separated by filtration and reused with its activity remaining unchanged.