Surface modification of carbon anodes for secondary lithium battery by fluorination

Recent results on the surface modification of petroleum cokes and their electrochemical properties as anodes of secondary lithium batteries are summarized. The surface of petroleum coke and those heat-treated at 1860-2800 °C were fluorinated by elemental fluorine (F₂), chlorine trifluoride (ClF₃) and nitrogen trifluoride (NF₃). No surface fluorine was found except only one sample when ClF₃ and NF₃ were used as fluorinating agents while surface region of petroleum coke was fluorinated when F₂ was used. Transmission electron microscopic (TEM) observation revealed that closed edge of graphitized petroleum coke was destroyed and opened by surface fluorination. Raman spectra showed that surface fluorination increased the surface disorder of petroleum cokes. Main effect of surface fluorination with F₂ is the increase in the first coulombic efficiencies of petroleum cokes graphitized at 2300-2800 °C by 12.1-18.2% at 60 mA/g and by 13.3-25.8% at 150 mA/g in 1 mol/dm³ LiClO₄-ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1, v/v). On the other hand, main effect of the fluorination with ClF₃ and NF₃ is the increase in the first discharge capacities of graphitized petroleum cokes by ∼63 mAh/g (∼29.5%) at 150 mA/g in 1 mol/dm³ LiClO₄-EC/DEC.     

Fluorination rates of polyolefins as a function of structure and gas atmosphere

Polyolefins and fluoropolymers were reacted with elemental fluorine under carefully controlled conditions in a thermobalance adapted to be compatible with fluorine gas. The fluorination reactions were monitored by measuring the mass increase as a result of hydrogen substitution by fluorine. The mass increase was directly proportional to the square root of the fluorination time, which indicates that fluorine gas diffusion to the unreacted surface is the rate determining step. The fluorination rate was increased by increasing the fluorine concentration and the fluorination temperature. The fluorination rate is higher when nitrogen rather than helium is used as diluting gas. The fluorination rate for the reaction in which CO₂ is used as diluting gas is the same as during fluorination with nitrogen as diluting gas, while the presence of oxygen dramatically decreased the fluorination rate. Oxygen is incorporated during fluorination with oxygen as diluting gas, while no functionalization was observed when CO₂ was employed as diluting gas. The effect of polymer structure on fluorination was studied. Poly(vinylfluoride) gained mass during fluorination, while no reaction was observed for poly(vinylidenefluoride). The reaction rate for polypropylene was higher than that of polyethylene. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

The effect of substituents and operating conditions on the electrochemical fluorination of alkyl phenylacetates in Et3N·4HF medium

Selective electrochemical fluorination of alkyl phenylacetates (Ph-CH₂-COOR, where R is methyl, ethyl, n-propyl, n-butyl, i-propyl and sec-butyl) under galvanostatic conditions were reported in Et₃N·4HF medium. Preparative electrolysis experiments were carried out both in pre-electrolysed dry Et₃N·4HF and the same electrolyte medium without pre-electrolysis. Very little hydrolysed fluorinated products were obtained in pre-electrolysed medium where as significant quantities of hydrolysed products leading to fluorinated phenylacetic acid were obtained from Et₃N·4HF without pre-electrolysis. Under optimum experimental conditions up to 87% selectivity of monofluoro ester could be achieved. Difluoro alkyl phenylacetate, monofluoro and difluoro phenylacetic acids were the other predominant side products obtained. The hydrolysis appears to be initiated by tautomeric transformation of proton after the initial electro oxidative formation of the cation radical. ¹⁹F as well as ¹H NMR spectroscopy have been employed to identify the minor constituents formed during the electro oxidative process.     

Electrophilic fluorination of aromatic compounds with NF type reagents: kinetic isotope effects and mechanism

H/D Isotope effects in fluorination of aromatic compounds with NF type reagents have been studied to reveal the reaction mechanism. The results obtained are consistent with a polar S_EAr mechanism. Small deuterium isotope effects (k_H/k_D = 0.86-0.99) show that decomposition of a Wheland-type intermediate is not rate determining. The first example of a 1,2-hydrogen shift accompanying electrophilic fluorination of arenes has been observed in the fluorination of 1,3,5-trideuterobenzene.     

Surface fluorination of the cathode active materials for lithium secondary battery

LiMn₂O₄ was treated with F₂ at room temperature (RT), 373 and 473 K under 1.3, 6.6 and 13.2 kPa-F₂. XPS data indicate that two kinds of fluorine species may exist on the sample surface and the ratio of these fluorines is affected by choosing the reaction condition. The peak indicating Mnⁿ⁺ bonded to fluorine appeared in the XPS spectra of Mn2p3/2 electron. From the results of the charge/discharge measurements, the efficiency of charge/discharge process for the sample fluorinated under 1.3, 6.6 and 13.2 kPa-F₂ below 373 K was larger than that of untreated one. The discharge capacity of the fluorinated sample was also larger than that of untreated one. The discharge capacity, the loss of discharge capacity during 50 charge/discharge cycles, F/O ratio measured from XPS data and the intensity of the peak indicating Mnⁿ⁺ bonded to fluorine in the XPS spectra were closely related to each other. The optimal fluorination condition was under 1.3 kPa-F₂ at RT for 1 h.     

Inter- and Intra-Molecular Organocatalysis of SN2 Fluorination by Crown Ether: Kinetics and Quantum Chemical Analysis

We present the intra- and inter-molecular organocatalysis of S_N2 fluorination using CsF by crown ether to estimate the efficacy of the promoter and to elucidate the reaction mechanism. The yields of intramolecular S_N2 fluorination of the veratrole substrates are measured to be very small (<1% in 12 h) in the absence of crown ether promoters, whereas the S_N2 fluorination of the substrate possessing a crown ether unit proceeds to near completion (~99%) in 12 h. We also studied the efficacy of intermolecular rate acceleration by an independent promoter 18-crown-6 for comparison. We find that the fluorinating yield of a veratrole substrate (leaving group = −OMs) in the presence of 18-crown-6 follows the almost identical kinetic course as that of intramolecular S_N2 fluorination, indicating the mechanistic similarity of intra- and inter-molecular organocatalysis of the crown ether for S_N2 fluorination. The calculated relative Gibbs free energies of activation for these reactions, in which the crown ether units act as Lewis base promoters for S_N2 fluorination, are in excellent agreement with the experimentally measured yields of fluorination. The role of the metal salt CsF is briefly discussed in terms of whether it reacts as a contact ion pair or as a “free” nucleophile F⁻.     

Origin of Salt Effects in SN2 Fluorination Using KF Promoted by Ionic Liquids: Quantum Chemical Analysis

Quantum chemical analysis is presented, motivated by Grée and co-workers’ observation of salt effects [Adv. Synth. Catal. 2006, 348, 1149–1153] for S_N2 fluorination of KF in ionic liquids (ILs). We examine the relative promoting capacity of KF in [bmim]PF₆ vs. [bmim]Cl by comparing the activation barriers of the reaction in the two ILs. We also elucidate the origin of the experimentally observed additional rate acceleration in IL [bmim]PF₆ achieved by adding KPF₆. We find that the anion PF₆⁻ in the added salt acts as an extra Lewis base binding to the counter-cation K⁺ to alleviate the strong Coulomb attractive force on the nucleophile F⁻, decreasing the Gibbs free energy of activation as compared with that in its absence, which is in good agreement with experimental observations of rate enhancement. We also predict that using 2 eq. KF together with an eq. KPF₆ would further activate S_N2 fluorination     

Effect of surface fluorination and conductive additives on the electrochemical behavior of lithium titanate (Li4/3Ti5/3O4) for lithium ion battery

Effect of surface fluorination and conductive additives on the charge/discharge behavior of lithium titanate (Li_4/3Ti_5/3O₄) has been investigated using F₂ gas and vapor grown carbon fiber (VGCF). Surface fluorination of Li_4/3Ti_5/3O₄ was made using F₂ gas (3 × 10⁴ Pa) at 25-150 °C for 2 min. Charge capacities of Li_4/3Ti_5/3O₄ samples fluorinated at 70 °C and 100 °C were larger than those for original sample at high current densities of 300 and 600 mA/g. Optimum fluorination temperatures of Li_4/3Ti_5/3O₄ were 70 °C and 100 °C. Fibrous VGCF with a large surface area (17.7 m²/g) increased the utilization of available capacity of Li_4/3Ti_5/3O₄ probably because it provided the better electrical contact than acetylene black (AB) between Li_4/3Ti_5/3O₄ particles and nickel current collector.     

Development of an on-line preconcentration system for zinc determination in biological samples

An on-line preconcentration system for zinc determination in 24-h urine, blood plasma and erythrocyte matrices by flame atomic absorption spectrometry (FAAS) was used. This procedure was based on adsorption of Zn(II) ions onto a minicolumn filled with silica gel, chemically modified with niobium(V) oxide (Nb₂O₅-SiO₂). The determination of the optimum conditions for Zn(II) preconcentration was done using two-level full factorial and Doehlert designs. In the optimization procedure, four variables (sample pH, eluent concentration, sample flow rate and eluent flow rate) were investigated. The results obtained from the full factorial design demonstrated that the sample pH and sample flow rate variables, and their interactions, were statistically significant. A Doehlert matrix was used in order to determine the optimum conditions for the sample pH and sample flow rate. The optimized conditions for sample pH and flow rate sampling were 6.6 and 7.1 ml min⁻¹, respectively, to obtain the maximum Zn(II) preconcentration and determination in the biological samples studied. Parameters of analytical curve, precision, effect of other ions in the proposed system and accuracy were achieved to assess the proposed method. The accuracy was confirmed by analysis of certified reference materials (urine Seronorm™ Trace Elements) and recovery tests in blood plasma and erythrocyte samples. Detection limit (3σ/S) of 0.77 μg l⁻¹, precision (calculated as relative standard deviation) of 1.5% for Zn(II) concentration of 10 μg l⁻¹ (n = 7) and a sampling frequency of 27 samples/h were obtained from the proposed system.     

Change in mechanistic pathway of hydroboration: A detailed kinetic study of H2BBr·SMe2 and HBBr2·SMe2

Hydroboration reactions of 1-octene and 1-hexyne with H₂BBr·SMe₂ in CH₂Cl₂ were studied as a function of concentration and temperature, using ¹¹B NMR spectroscopy. The reactions exhibited saturation kinetics. The rate of dissociation of dimethyl sulfide from boron at 25 °C was found to be (7.36 ± 0.59 and 7.32 ± 0.90) × 10⁻³ s⁻¹ for 1-octene and 1-hexyne, respectively. The second order rate constants, k₂, for hydroboration worked out to be 7.00 ± 0.81 M s⁻¹ and 7.03 ± 0.70 M s⁻¹, while the overall composite second order rate constants, k K, were (3.30 ± 0.43 and 3.10 ± 0.37) × 10⁻² M s⁻¹, respectively at 25 °C. The entropy and enthalpy values were found to be large and positive for k₁, whilst for k₂ these were large and negative, with small values for enthalpies. This is indicative of a limiting dissociative (D) for the dissociation of Me₂S and associative mechanism (A) for the hydroboration process. The overall activation parameters, ΔH^≠ and ΔS^≠, were found to be 98 ± 2 kJ mol⁻¹ and +56 ± 7 J K⁻¹ mol⁻¹ for 1-octene whilst, in the case of 1-hexyne these were found out to be 117 ± 7 kJ mol⁻¹ and +119 ± 24 J K⁻¹ mol⁻¹, respectively. When comparing the kinetic data between H₂BBr·SMe₂ and HBBr₂·SMe₂, the results showed that the rate of dissociation of Me₂S from H₂BBr·SMe₂ is on average 34 times faster than it is in the case of HBBr₂·SMe₂. Similarly, the rate of hydroboration with H₂BBr·SMe₂ was found to be on average 11 times faster than it is with HBBr₂·SMe₂. It is also clear that by replacing a hydrogen substituent with a bromine atom in the case of H₂BBr·SMe₂ the mechanism for the overall process changes from limiting dissociative (D) to interchange associative (I_a).     

Ab initio/DFT theory and multichannel RRKM study on the mechanisms and kinetics for the CH3S + CO reaction

The potential energy surface for the reaction of CH₃S with CO was calculated at the G3MP2//B3LYP/6-311++G(d,p) level. The rate constants for feasible channels leading to several products were calculated by TST and multichannel-RRKM theory. The results show that addition–elimination mechanism is dominant, while hydrogen abstraction mechanism is uncompetitive. The major channel is the addition of CO to CH₃S leading to an intermediate CH₃SCO which then decomposes to CH₃ + OCS. In the temperature range of 200–3000 K, the overall rate constants are positive temperature dependence and pressure independence, and it can be described by the expression as k = 1.10 × 10⁻¹⁶T^1.57exp(−3359/T) cm³ molecule⁻¹ s⁻¹. At temperature between 208 and 295 K, the calculated rate constants are in good agreement with the experimental upper limit data. At T = 1000 and 2000 K, the major product is CH₃ + OCS at lower pressure; while at higher pressure, the stabilization of IM1 is dominant channel.     

Fluorination effect of activated carbon electrodes on the electrochemical performance of electric double layer capacitors

The surface of phenol-based activated carbon (AC) was fluorinated at room temperature with different F₂:N₂ gas mixtures for use as an electrode material in an electric double-layer capacitor (EDLC). The effect of surface fluorination on EDLC electrochemical performance was investigated. The specific capacitance of the fluorinated AC-based EDLC was measured in a 1 M H₂SO₄ electrolyte, in which it was observed that the specific capacitances increased from 375 and 145 F g⁻¹ to 491 and 212 F g⁻¹ with the scan rates of 2 and 50 mV s⁻¹, respectively, in comparison to those of an unfluorinated AC-based EDLC when the fluorination process was optimized via 0.2 bar partial F₂ gas pressure. This enhancement in capacitance can be attributed to the synergistic effect of increased polarization on the AC surface, specific surface area, and micro and mesopore volumes, all of which were induced by the fluorination process. The observed increase in polarization was derived from a highly electronegative fluorine functional group that emerged due to the fluorination process. The increased surface area and pore volume of the AC was derived from the physical function of the fluorine functional group.     

Surface and bulk properties of severely fluorinated carbon fibres

The development of ultra-inert composites using fluorinated carbon fibres as the reinforcement requires fluorinated carbon fibres with a durable surface composition. Here we report the effect of direct fluorination using an F₂/N₂ mixture at 653 K on the surface and bulk properties of two types of high strength carbon fibres. These were treated up to a surface fluorine content of ∼64 at.% and a bulk fluorine content of ∼15 mass%. A colour change was observed after fluorination caused by the changes in the graphitic band structure of the carbon fibres by the introduction of carbon sp³ hybridisation. The tensile strength and Young's modulus decrease after fluorination by up to 33 and 22%, respectively. XRD shows marginal changes in the interlayer distance but the crystallite size increases. Changes in the electrical conductivity of the fluorinated carbon fibres indicate that the modification is confined to the near surface volume. Predominantly covalent C-F bonds are formed as shown by X-ray photoelectron spectroscopy (XPS) and measured zeta (ζ)-potentials. Hence the fluorinated fibres are hydrophobic and have low surface tensions. This and the large increase in fibre surface area, as determined by nitrogen adsorption, is expected to facilitate interfacial interaction between fluorinated carbon fibres and fluoropolymers.     

The first step of oxidation of alkylbenzenes by permanganates in acidic aqueous solutions

Data on the kinetics, kinetic isotope effects, substrate selectivety, and activation parameters for the first step of oxidation of alkylbenzenes by permanganante in acidic aqueous solutions are surveyed. The MnO₄ ⁻, HMnO₄, and MnO₃ ⁺ species serve as oxidants at different acidities. The increase in the positive charge in this series enhances the electrophilicity of the reagent, which manifests itself as an increase in the reaction rate and a change in the site of attack on the alkylbenzene molecule (either the aromatic ring or C−H bond in the alkyl group). The oxidation of the alkyl C−H bonds in alkylbenzenes and in alkanes follows similar mechanisms, while the attack on the aromatic ring proceedsvia the electrophilic aromatic substitution mechanism with a transition state intermediate between the charge transfer complex and σ-complex. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 765–780, May, 2000.     

Kinetics and mechanism of the defluorination of 8-fluoropurine nucleosides in basic and acidic media

For investigating the stability of C(8)-fluorine bond in 8-fluoropurine nucleosides some protected 8-fluoroguanosine, 8-fluoroinosine and 8-fluoroadenosine derivatives were prepared by direct fluorination of acetyl-protected purine nucleosides with elemental fluorine in solvents such as chloroform, acetonitrile and nitromethane. Fluorination reactions conducted in chloroform medium gave better yields of 8-fluoropurines. The fluorination yields were slightly lower when acetonitrile or nitromethane was used as solvent, but the product purification was found to be much easier. When the synthesized, protected fluoronucleosides were subjected to standard basic (NH₃ in methanol or 2-propanol) and acidic (HCl in methanol) deprotection conditions relevant to nucleoside chemistry, an efficient defluorination reaction took place. The kinetics of these defluorination reactions were conveniently followed, under pseudo-first-order reaction conditions, using ¹⁹F NMR spectroscopy. ¹H NMR, LC-MS and mass spectroscopy identified the products of the kinetic reaction mixtures. The defluorination reaction rate constants (k_obs) in basic media depended upon the electron density at C(8) while the k_obs data in acidic medium were determined by the pK_a of N⁷. An addition-elimination based mechanism (S_NAr) has been proposed for the defluorination reactions of these 8-fluoropurine nucleosides.     

Recent developments in the preparation of high surface area metal fluorides

An overview of the main procedures for the preparation of fluorides with very high surface areas is given. Three processes are outlined: (i) plasma fluorination, (ii) sol–gel route and (iii) oxidative decomposition of inorganic precursors. From all three processes nanostructured metal fluorides with 100–400 m² g⁻¹ can be obtained. Prevention of the local overheating during fluorination seems to be the key factor to obtain the high surface area fluorides. TEM investigations of AlF₃ and CrF₃ obtained by oxidative decomposition revealed considerable differences in their morphologies and crystallinity. CrF₃ is completely amorphous and unstable under beam. AlF₃ contains an amorphous phase and nanocrystalline phases of α-AlF₃ and β-AlF₃. Nanocrystals are uniformly distributed within the amorphous phase. Also present are the rod-like nanostructures that consist of β-AlF₃ and are 5–10 nm wide.     

Radical chain monoalkylation of pyridines

The monoalkylation of N-methoxypyridinium salts with alkyl radicals generated from alkenes (via hydroboration with catecholborane), alkyl iodides (via iodine atom transfer) and xanthates is reported. The reaction proceeds under neutral conditions since no acid is needed to activate the heterocycle and no external oxidant is required. A rate constant for the addition of a primary radical to N-methoxylepidinium >10⁷ M⁻¹ s⁻¹ was experimentally determined. This rate constant is more than one order of magnitude larger than the one measured for the addition of primary alkyl radicals to protonated lepidine demonstrating the remarkable reactivity of methoxypyridinium salts towards radicals. The reaction has been used for the preparation of unique pyridinylated terpenoids and was extended to a three-component carbopyridinylation of electron-rich alkenes including enol esters, enol ethers and enamides.

N-Methoxypyridinium salts are exceptionally reactive radical traps that can be used in efficient radical chain reactions with organoboranes.     

Fluorination of poly(p-phenylene) using TbF4 as fluorinating agent

The fluorination using TbF₄ as fluorinating agent was successfully performed on poly(p-phenylene). The method allows the fluorine content of the polymer to be controlled and the formation of structural defects, such as dangling bonds, to be significantly decreased by comparison with the direct fluorination using pure F₂ gas. The aromatic character of the phenyl ring is partly maintained through the fluorination contrary to the direct fluorination (using pure F₂ gas), for which a quasi-perfluorination and a partial decomposition of the polymer occur. Complementary analytical techniques have been used, such as ¹⁹F and ¹³C solid state NMR, FT-IR and EPR to compare the samples as a function of the reaction conditions.     

Surface structure and electrochemical characteristics of natural graphite fluorinated by ClF3

Natural graphite samples with average particle sizes of 5, 10 and 15 μm (NG5 μm, NG10 μm and NG15 μm, respectively) were fluorinated by ClF₃ (3 × 10⁴ Pa) at 200 and 300 °C for 2 min. X-ray photoelectron spectra of surface-fluorinated samples showed that surface fluorine concentration increased with increase in the particle size of graphite and reaction temperature. Small amounts of chlorine were also detected in all the fluorinated samples. Raman spectra of original and surface-fluorinated samples indicated that the surface disordering was increased for NG10 μm and NG15 μm. Surface areas were decreased by the fluorination for NG5 μm and NG10 μm but unchanged for NG15 μm. The mesopores with diameter of 1.5-2 nm increased while those of 2-3 nm decreased for all the samples. First coulombic efficiencies for NG10 μm and NG15 μm were highly increased by surface fluorination in 1 mol/dm³ LiClO₄-EC/DEC/PC (EC: ethylene carbonate, DEC: diethyl carbonate, PC: propylene carbonate) solution.