Conversion of novel palladacycles into oxopyrrolo[3,4-b]quinolines

The quinolinylcyclopalladated complexes 3a–b were synthesised in good yields (81% and 77%) by the insertion reaction of the prepared dinuclear palladium complexes [Pd(C,N-2-C₉H₄N-CHO-3-R-6)Cl(PPh₃)]₂ [(R = H (2a), R = OMe (2b)] with isonitrile XyNC (Xy = 2,6-Me₂C₆H₃). The cyclopalladated complexes 3a–b were also obtained in low yields (39% and 33.5%) via a one pot oxidative addition reaction of quinoline chloride 1a–b with isonitrile XyNC:Pd(dba)₂ (4:1). The reactions of 3a–b with Tl(TfO) (TfO = triflate, CF₃SO₃) in the presence of H₂O or EtOH causes depalladation reactions of the complexes to provide the corresponding organic compounds 4a–b, 5a–b and 6a–b in yields (41%, 27% and 18–19%). The products were characterized by satisfactory elemental analyses and spectral studies (IR, ¹H, ¹³C and ³¹P NMR). The crystal structures of 2a, 3a and 3b were determined by X-ray diffraction studies.     

A highly stereoselective preparation of CF3-substituted 1-aryl-1,2-diphenylethenes: application to the synthesis of panomifene

β-CF₃-α,β-diphenylvinyl sulfide 3a was prepared stereoselectively in 77% yield from the reaction of 2 with phenyllithium at room temperature for 5 h. Oxidation of 3a with MCPBA afforded the corresponding vinyl sulfone 4a, in which (E)-4a can be crystallized in a mixture of CH₂Cl₂ and hexane. The addition-elimination reaction of (E)-4a with phenyllithium having substituents on the benzene ring provided 5a-j in 51-82% yields stereospecifically. Similarly, the treatment of (E)-4a with p-chloroethoxyphenyllithium in the presence of 12-crown-4 (20 mol %) at −10 °C, followed by slowly warming to room temperature, resulted in the formation of the corresponding panomifene precursor 6 in 82% yield.     

Reactivity of M(en)Cl2 (M = Pd/Pt,en = 1,2-diaminoethane) with N,N′-bis(salicylidene)-p-phenylenediamine: Binding with hexafluorobenzene

Schiff base N,N′-bis(salicylidene)-p-phenylenediamine (LH₂) complexed with Pt(en)Cl₂ and Pd(en)Cl₂ provided [Pt(en)L]₂ · 4PF₆ (1) and Pd(Salen) (2) (Salen = N,N′-bis(salicylidene)-ethylenediamine), respectively, which were characterized by their elemental analysis, spectroscopic data and X-ray data. A solid complex obtained by the reaction of hexafluorobenzene (hfb) with the representative complex 1 has been isolated and characterized as 3 (1 · hfb) using UV–Vis, NMR (¹H, ¹³C and ¹⁹F) data. A solid complex of hfb with a reported Zn-cyclophane 4 has also been prepared and characterized 5 (4 · hfb) for comparison with complex 3. The association of hfb with 1 and 4 has also been monitored using UV–Vis and luminescence data.     

Application of chiral tetrahydropentalene ligands in rhodium-catalyzed 1,4-addition of (E)-2-phenylethenyl- and (Z)-propenylboronic acids to enones

Chiral tetrahydropentalenes (3aR,6aR)-1 have been prepared and used as ligands in the Rh-catalyzed 1,4-addition of 1-alkenylboronic acids to cyclic enones 5. It has been discovered that the stereochemistry of the reaction was controlled by the steric properties of the aryl groups in 1 rather than their electronic nature. In the vinylation with (E)-2-phenylethenylboronic acid 5, ligands (3aR,6aR)-1 provided enantioselectivity up to 87% ee and gave high yields of ethenylketones 6 in the presence of 1 (6.6 mol %). The configuration of all ketone products obtained with (3aR,6aR)-1 is (S). Rh-catalyzed reaction of cyclopentenone 4a and (Z)-propenylboronic acid 7 in the presence of ligands (3aR,6aR)-1 yielded at 50 °C an inseparable mixture of (Z)- and (E)-ketones 8 with (Z)-8 as the major product and both in only moderate enantiomeric excess.     

Aqueous syntheses of [(Cp-R)M(CO)3] type complexes (Cp = cyclopentadienyl, M = Mn, Tc, Re) with bioactive functionalities

We describe reactions of [^99mTc(H₂O)₃(CO)₃)]⁺ (1) with Diels-Alder products of cyclopentadiene such as “Thiele’s acid” (HCp-COOH)₂ (2) and derivatives thereof in which the corresponding [(Cp-COOH)^99mTc(CO)₃)] (3) complex did form in water. We propose a metal mediated Diels-Alder reaction mechanism. To show that this reaction was not limited to carboxylate groups, we synthesized conjugates of 2 (HCp-CONHR)₂ (4a-c) (4a, R = benzyl amine; 4b, R = N_α-Boc-l-2,3-diaminopropionic acid and 4c, R = glycine). The corresponding ^99mTc complexes [(4a)^99mTc(CO)₃)] 6a, [(4b)^99mTc(CO)₃)] 6b and [(4c)^99mTc(CO)₃)] 6c have been prepared along the same route as for Thiele’s acid in aqueous media demonstrating the general applicability of this synthetic strategy. The authenticity of the ^99mTc complexes on the no carrier added level have been confirmed by chromatographic comparison with the structurally characterized manganese or rhenium complexes.Studies of the reaction of 1 with Thiele’s acid bound to a solid phase resin demonstrated the formation of [(Cp-COOH)^99mTc(CO)₃)] 3 in a heterogeneous reaction. This is the first evidence for the formation of no carrier added ^99mTc radiopharmaceuticals containing cyclopentadienyl ligands via solid phase syntheses. Macroscopically, the manganese analogue 5a and the rhenium complexes 5b-c have been prepared and characterized by IR, NMR, ESI-MS and X-ray crystallography for 5a (monoclinic, P2₁/c, a = 9.8696(2) Å, b = 25.8533(4) Å, c = 11.8414(2) Å, β = 98.7322(17)°) in order to unambiguously assign the authenticity of the corresponding ^99mTc complexes.     

Coordination compounds of N,N′-olefin functionalized imidazolin-2-ylidenes

N-Heterocyclic carbene ligands (NHC) were metalated with Pd(OAc)₂ or [Ni(CH₃CN)₆](BF₄)₂ by in situ deprotonation of imidazolium salts to give the N-olefin functionalized biscarbene complexes [MX₂(NHC)₂] 3-7 (3: M = Pd, X = Br, NHC = 1,3-di(3-butenyl)imidazolin-2-ylidene; 4: M = Pd, X = Br, NHC = 1,3-di(4-pentenyl)imidazolin-2-ylidene; 5: M = Pd, X = I, NHC = 1,3-diallylimidazolin-2-ylidene; 6: M = Ni, X = I, NHC = 1,3-diallylimidazolin-2-ylidene; 7: M = Ni, X = I, NHC = 1-methyl-3-allylimidazolin-2-ylidene). Molecular structure determinations for 4-7 revealed that square-planar complexes with cis (5) or trans (4, 6, 7) coordination geometry at the metal center had been obtained. Reaction of nickelocene with imidazolium bromides afforded the η⁵-cyclopentadienyl (η⁵-Cp) monocarbene nickel complexes [NiBr(η⁵-Cp)(NHC)] 8 and 9 (8: NHC = 1-methyl-3-allylimidazolin-2-ylidene; 9: NHC = 1,3-diallylimidazolin-2-ylidene). The bromine abstraction in complexes 8 and 9 with silver tetrafluoroborate gave complexes [NiBr(η⁵-Cp)(η³-NHC)] 10 and 11. The X-ray structure analysis of 10 and 11 showed a trigonal-pyramidal coordination geometry at the nickel(II) center and coordination of one N-allyl substituent.     

4-Chloro-5-methyl-3-diphenylphosphino-1-phenyl-1,2,3,6-tetrahydrophosphinine as a bidentate P-ligand in a cis chelate Pt(II) complex

Double deoxygenation of a 3-phosphinoxido-1,2,3,6-tetrahydrophosphine oxide (2) led to bisphosphine 3-2 with an inverted ring P atom. The reaction of bidentate P-ligand 3-2 with dichlorodibenzonitrilo platinum(II) yielded the mixture of a novel cis chelate complex (7 = PtCl₂(3-2)) and a cis bis(3-diphenylphosphino-1,2,3,6-tetrahydrophosphininyl) complex (8 = PtCl₂(η¹-5)₂) containing two units of monodentate P-ligand 5.     

Synthesis, characterization and Schlenk equilibrium studies of methylmagnesium compounds with O- and N-donor ligands - the unexpected behavior of [MgMeBr(pmdta)] (pmdta = N,N,N′,N″,N″-pentamethyldiethylenetriamine)

MgMe₂ (1) was found to react with 1,4-diazabicyclo[2.2.2]octane (dabco) in tetrahydrofuran (thf) yielding a binuclear complex [{MgMe₂(thf)}₂(μ-dabco)] (2). Furthermore, from reactions of MgMeBr with diglyme (diethylene glycol dimethyl ether), NEt₃, and tmeda (N,N,N′,N′-tetramethylethylenediamine) in etheral solvents compounds MgMeBr(L), (L = diglyme (5); NEt₃ (6); tmeda (7)) were obtained as highly air- and moisture-sensitive white powders. From a thf solution of 7 crystals of [MgMeBr(thf)(tmeda)] (8) were obtained. Reactions of MgMeBr with pmdta (N,N,N′,N″,N″-pentamethyldiethylenetriamine) in thf resulted in formation of [MgMeBr(pmdta)] (9) in nearly quantitative yield. On the other hand, the same reaction in diethyl ether gave MgMeBr(pmdta) · MgBr₂(pmdta) (10) and [{MgMe₂(pmdta)}₇{MgMeBr(pmdta)}] (11) in 24% and 2% yield, respectively, as well as [MgMe₂(pmdta)] (12) as colorless needle-like crystals in about 26% yield. The synthesized methylmagnesium compounds were characterized by microanalysis and ¹H and ¹³C NMR spectroscopy. The coordination-induced shifts of the ¹H and ¹³C nuclei of the ligands are small; the largest ones were found in the tmeda and pmdta complexes. Single-crystal X-ray diffraction analyses revealed in 2 a tetrahedral environment of the Mg atoms with a bridging dabco ligand and in 8 a trigonal-bipyramidal coordination of the Mg atom. The single-crystal X-ray diffraction analyses of [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) showed them to be monomeric with five-coordinate Mg atoms. The square-pyramidal coordination polyhedra are built up of three N and two C atoms in 12 and three N and two Br atoms in 13. The apical positions are occupied by methyl and bromo ligands, respectively. Temperature-dependent ¹H NMR spectroscopic measurements (from 27 to −80 °C) of methylmagnesium bromide complexes MgMeBr(L) (L = thf (4); diglyme (5); NEt₃ (6); tmeda (7)) in thf-d₈ solutions indicated that the deeper the temperature the more the Schlenk equilibria are shifted to the dimethylmagnesium/dibromomagnesium species. Furthermore, at −80 °C the dimethylmagnesium compounds are predominant in the solutions of Grignard compounds 4-6 whereas in the case of the tmeda complex7 the equilibrium constant was roughly estimated to be 0.25. In contrast, [MgMeBr(pmdta)] (9) in thf-d₈ revealed no dismutation into [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) even up to −100 °C. In accordance with this unexpected behavior, 1:1 mixtures of 12 and 13 were found to react in thf at room temperature yielding quantitatively the corresponding Grignard compound 9. Moreover, the structures of [MgMeBr(pmdta)] (9c), [MgMe₂(pmdta)] (12c), and [MgBr₂(pmdta)] (13c) were calculated on the DFT level of theory. The calculated structures 12c and 13c are in a good agreement with the experimentally observed structures 12 and 13. The equilibrium constant of the Schlenk equilibrium (2 9c ? 12c + 13c) was calculated to be K_gas = 2.0 × 10⁻³ (298 K) in the gas phase. Considering the solvent effects of both thf and diethyl ether using a polarized continuum model (PCM) the corresponding equilibrium constants were calculated to be K_thf = 1.2 × 10⁻³ and K_ether = 3.2 × 10⁻³ (298 K), respectively.     

Synthesis and characterization of cyclopentadienyl/alkoxo titanium dichlorides: structural analysis of monocyclopentadienyl titanium dichlorides with ligands derived from menthol and borneol

A variety of monocyclopentadienyl alkoxo titanium dichloride and bisalkoxo titanium dichloride complexes have been prepared and characterized by spectroscopic techniques. The titanium derivatives containing both cyclopentadienyl and various alkoxo ligands [Ti(η⁵-C₅H₅)(OR)Cl₂] (1-5) have been synthesized from the reaction of [Ti(η⁵-C₅H₅)Cl₃] with 1 equivalent of the corresponding alcohol in THF in the presence of triethylamine (ROH = Adamantanol, 1R,2S,5R-(−)-menthol, 1S-endo-(−)-borneol, cis-1,3-(−)-benzylideneglycerol, 1,2:3,4-di-O-isopropylidene-α-d-galactopyranose). The bisalkoxo titanium dichloride derivatives [TiCl₂(OR)₂] (6-10) have been prepared by a redistribution reaction between Ti(OR)₄ and TiCl₄ compounds 6-8 (OR = Adamantanoxy, (1R,2S,5R)-(−)menthoxy, (1S-endo)-(−)-borneoxy) and by reaction of [Ti(OR)₂(OPrⁱ)₂]₂ with CH₃COCl compounds 9 and 10 (OR = 1,2:3,4-di-O-isopropylidene-α-d-galactopyranoxy, and 1,2:5,6-di-O-isopropylidene-α-d-glucofuranoxy). The molecular structures of 2 and 3 have been determined by single crystal X-ray diffraction studies.     

Thermal hydrosilylation of olefin with hydrosilane. Preparative and mechanistic aspects

The reaction of trichlorosilane (1a) at 250 °C with cycloalkenes, such as cyclopentene (2a), cyclohexene (2b), cycloheptene (2c), and cyclooctene (2d), gave cycloalkyltrichlorosilanes [C_nH_2n−1SiCl₃: n = 5 (3a), 6 (3b), 7 (3c), 8 (3d)] within 6 h in excellent yields (97-98%), but the similar reactions using methyldichlorosilane (1b) instead of 1a required a longer reaction time of 40 h and afforded cycloalkyl(methyl)dichlorosilanes [C_nH_2n−1SiMeCl₂: n = 5 (3e), 6 (3f), 7 (3g), 8 (3h)] in 88-92% yields with 4-8% recovery of reactant 2. In large (2, 0.29 mol)-scale preparations, the reactions of 2a and 2b with 1a (0.58 mol) under the same condition gave 3a and 3b in 95% and 94% isolated yields, respectively. The relative reactivity of four hydrosilanes [HSiCl_3−mMe_m: m = 0-3] in the reaction with 2a indicates that as the number of chlorine-substituent(s) on the silicon increases the rate of the reaction decreases in the following order: n = 3 > 2 > 1 ? 0. In the reaction with 1a, the relative reactivity of four cycloalkenes (ring size = 5-8) decreases in the following order: 2d > 2a > 2c > 2b. Meanwhile linear alkenes like 1-hexene undergo two reactions of self-isomerization and hydrosilylation with hydrosilane to give a mixture of the three isomers (1-, 2-, and 3-silylated hexanes). In this reaction, the reactivity of the terminal 1-hexene is higher than the internal 2- and 3-hexene. The redistribution of hydrosilane 1 and the polymerization of olefin 2 occurred rarely under the thermal reaction condition.     

New alkenyl-substituted group 4 C-ansa-metallocene complexes. Reactivity of the substituent at the carbon ansa bridge

The allyl-substituted group 4 metal complexes [M{(R)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti, R = CH₂CHCH₂, (2); R = CH₂C(CH₃)CH₂ (3); M = Zr, R = CH₂CHCH₂ (4), R = CH₂C(CH₃)CH₂ (5)] have been synthesized by the reaction of allyl ansa-magnesocene derivatives and the tetrachloride salts of the corresponding transition metal. The dialkyl complexes ] [M = Ti, R = CH₂=CHCH₂, R′ = Me (6), R′ = CH₂Ph (7); R = CH₂C(CH₃)CH₂, R′ = Me (8), R′ = CH₂Ph (9); M = Zr, R = CH₂CHCH₂, R′ = Me (10), R′ = CH₂Ph (11); R = CH₂C(CH₃)CH₂, R′ = Me (12), R′ = CH₂Ph (13)] have been synthesized by the reaction of the corresponding ansa-metallocene dichloride complexes 2-5 and two molar equivalents of the alkyl Grignard reagent. Compounds 2-5 reacted with H₂ under catalytic conditions (Wilkinson’s catalyst or Pd/C) to give the hydrogenation products [M{(R)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = CH₂CH₂CH₃ (14) or R = CH₂CH(CH₃)₂ (15); M = Zr and R = CH₂CH₂CH₃ (16) or R = CH₂CH(CH₃)₂ (17)]. The reactivity of 2-5 has also been tested in hydroboration and hydrosilylation reactions. The hydroboration reactions of 3, 4 and 5 with 9-borabicyclo[3.3.1]nonane (9-BBN) yielded the complexes [M{(9-BBN)CH₂CH(R)CH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = H (18); M = Zr and R = H (19) or R = CH₃ (20)]. The reaction with the silane reagents HSiMe₂Cl gave the corresponding [M{ClMe₂SiCH₂CHRCH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = H (21); M = Zr and R = H (22) or R = CH₃ (23)]. The reaction of 22 with t-BuMe₂SiOH produced a new complex [Zr{t-BuMe₂SiOSi(Me₂)CH₂CH₂CH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (24) through the formation of Si-O-Si bonds. On the other hand, reactivity studies of some zirconocene complexes were carried out, with the insertion reaction of phenyl isocyanate (PhNCO) into the zirconium-carbon σ-bond of [Zr{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}₂Me₂] (25) giving [{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)]}Zr{Me{κ²-O,N-OC(Me)NPh}] as a mixture of two isomers 26a-b. The reaction of [Zr{(n-Bu)(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}(CH₂Ph)₂] (27) with CO also provided a mixture of two isomers [{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)]}Zr(CH₂Ph){κ²-O,C-COCH₂Ph}] 28a-b. The molecular structures of 4, 11, 16 and 17 have been determined by single-crystal X-ray diffraction studies.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Syntheses,structures and hydrolytic properties of copper(II) complexes of asymmetrically N-functionalised 1,4,7-triazacyclononane ligands

A series of new asymmetrically N-substituted derivatives of the 1,4,7-triazacyclononane (tacn) macrocycle have been prepared from the common precursor 1,4,7-triazatricyclo[5.2.1.0^4,10]decane: 1-ethyl-4-isopropyl-1,4,7-triazacyclononane (L1), 1-isopropyl-4-propyl-1,4,7-triazacyclononane (L2), 1-(3-aminopropyl)-4-benzyl-7-isopropyl-1,4,7-triazacyclononane (L3), 1-benzyl-4-isopropyl-1,4,7-triazacyclononane (L4) and 1,4-bis(3-aminopropyl)-7-isopropyl-1,4,7-triazacyclononane (L5). The corresponding monomeric copper(II) complexes were synthesised and were found to be of composition: [Cu(L1)Cl₂] · 1/2 H₂O (C1), [Cu(L4)Cl₂] · 4H₂O (C2), [Cu(L3)(MeCN)](ClO₄)₂ (C3), [Cu(L5)](ClO₄)₂ · MeCN · NaClO₄ (C4) and [Cu(L2)Cl₂] · 1/2 H₂O (C5). The X-ray crystal structures of each complex revealed a distorted square-pyramidal copper(II) geometry, with the nitrogen donors on the ligands occupying 3 (C1 and C2), 4 (C3) or 5 (C4) coordination sites on the Cu(II) centre. The metal complexes were tested for the ability to hydrolytically cleave phosphate esters at near physiological conditions, using the model phosphodiester, bis(p-nitrophenyl)phosphate (BNPP). The observed rate constants for BNPP cleavage followed the order k_C1 ≈ k_C2 > k_C5 ? k_C3 > k_C4, confirming that tacn-type Cu(II) complexes efficiently accelerate phosphate ester hydrolysis by being able to bind phosphate esters and also form the nucleophile necessary to carry out intramolecular cleavage. Complexes C1 and C2, featuring asymmetrically disubstituted ligands, exhibited rate constants of the same order of magnitude as those reported for the Cu(II) complexes of symmetrically tri-N-alkylated tacn ligands (k ∼ 1.5 × 10⁻⁵ s⁻¹).     

Preparation, crystal structure, and spectroscopic, chemical, and electrochemical properties of (2E,4E)-4-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)-1,3-butadiene compared with those of (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene

Wittig reaction of 3-[4-(dimethylamino)phenyl]propanal (5) with (3-guaiazulenylmethyl)triphenylphosphonium bromide (4) in ethanol containing NaOEt at 25 °C for 24 h under argon gives the title (2E,4E)-1,3-butadiene derivative 6E in 19% isolated yield. Spectroscopic properties, crystal structure, and electrochemical behavior of the obtained new extended π-electron system 6E, compared with those of the previously reported (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene (12), are documented. Furthermore, reaction of 6E with 1,1,2,2-tetracyanoethylene (TCNE) in benzene at 25 °C for 24 h under argon affords a new Diels-Alder adduct 8 in 59% isolated yield. Along with spectroscopic properties of the [π4+π2] cycloaddition product 8, the crystal structure, possessing a cis-3,6-substituted 1,1,2,2-tetracyano-4-cyclohexene unit, is shown. Moreover, reaction of 6E with (E)-1,2-dicyanoethylene (DCNE) under the same reaction conditions as the above gives no product; however, this reaction in p-xylene at reflux temperature (138 °C) for four days under argon affords a new Diels-Alder adduct 9 in 54% isolated yield. Although reaction of 6E with DCNE in toluene at reflux temperature (110 °C) for four days under argon provides 9 very slightly, reaction of 6E with dimethyl acetylenedicarboxylate (DMAD) in toluene at reflux temperature for two days under argon yields a new Diels-Alder adduct 10, in 58% isolated yield, which upon oxidation with MnO₂ in CH₂Cl₂ at 25 °C for 1 h gives 11, converting a (CH₃)₂N-4″ into CH₃NH-4″ group, in 37% isolated yield. The crystal structure of 11 supports the molecular structure 10 possessing a partial structure cis-3,6-substituted 1,2-dimethoxycarbonyl-1,4-cyclohexadiene. The title basic studies on the above are reported in detail.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

Synthesis,characterization, and electrochemical,electrical and gas sensing properties of a novel tert-butylcalix[4]arene bridged bis double-decker lutetium(III) phthalocyanine

A novel tert-butylcalix[4]arene bridged bis double-decker lutetium(III) phthalocyanine (Lu₂Pc₄) (5) has been synthesized by the reaction of dimeric lutetium(III) phthalocyanine (4) with two equiv. of dilithium octakis hexylthiophthalocyanine in amyl alcohol. The phthalonitrile derivative 1 was obtained through the displacement reaction of 4-nitrophthalonitrile with 1,3-dimethoxy-4-tert-butylcalix[4]arene and was converted to the isoindoline derivative 2 by bubbling ammonia gas in dry MeOH. Compound 4 was prepared from 2, 4,5-bis(hexylthio)-1,2-diiminoisoindoline (3), and lutetium acetate in dry DMF. The new compounds and phthalocyanines were characterized by elemental analysis, IR, UV–Vis, ¹H NMR, ESR and MALDI-TOF MS spectra. The electrochemical properties of 4 and 5 have been examined by cyclic voltammetry, and compared. Distinctive differences between the voltammetric behaviour of 4 and 5 were detected. These differences were compatible with the structures of the compounds. A detailed study of the effect of temperature on the d.c. conductivity and impedance spectra (40–10⁵ Hz) of spin coated films of 4 and 5 at temperatures between 290 K and 420 K was carried out. By analyzing the d.c. electrical behaviour of the 5 film, it was found that the experimental data are described by a thermally activated conductivity dependence on temperature with an activation energy of 0.77 eV. The a.c. results give a power law behaviour, σ_a.c. = A(T)ω^s, in which the frequency exponent s decreases with temperature. The sensing behaviour of the film for the online detection of volatile organic solvent vapors was investigated by utilizing an AT-cut quartz crystal resonator. It was observed that the adsorption of the target molecules on the coating surface cause a reversible negative frequency shift of the resonator. Thus, a variety of solvent vapors can be detected by using the 5 film as sensitive coating, with sensitivity in the ppm and response times in the order of several seconds depending on the dipole moment of the organic solvent.     

The enantioselective high-pressure Diels-Alder reaction of 1-methoxybuta-1,3-diene with tert-butyldimethylsilyloxyacetaldehyde catalyzed by (salen)Co(II) and (salen)Cr(III)Cl complexes

The high-pressure (10-11 kbar) reaction of 1-methoxybuta-1,3-diene (1) with tert-butyldimethylsilyloxyacetaldehyde (2), catalyzed by the chiral (salen)Co(II) 4 or (salen)Cr(III)Cl 5 complexes, has been studied. We found that the reaction afforded, in good yield (up to 90%) and both with very good diastereoselectivity (up to 92%) and enantioselectivity (up to 94% ee), the [4 + 2]cycloadducts 3, which are compounds of significant synthetic interest.     

Redistribution reactions of heteroleptic barium iodide derivatives: Synthesis and structures of trans-BaI2(DME)(triglyme), cis-BaI2(DME)(tetraglyme) and [Ba(tetraglyme)2]I2 · C7H8

The reaction between BaI₂ · 2H₂O and NaHFIP [HFIP = OCH(CF₃)₂] in a 1:1 stoichiometry gave the heterometallic compound NaBaI₂(HFIP)(H₂O)(THF)_0.5 (1). Attempts to recrystallize 1 in the presence of N- or O-donor ligands lead to redistribution reactions. Barium iodide adducts such as BaI₂(DME)₃ (2), trans-BaI₂(DME)(triglyme) (3) and cis-BaI₂(DME)(tetraglyme) (4) were isolated with DME as solvent. A similar behavior was observed for the reaction between BaI₂ · 2H₂O and NaTFA (TFA = O₂CCF₃) in a 1:1 stoichiometry in THF, and [Ba(tetraglyme)₂]I₂ · C₇H₈ (6) was isolated in the presence of excess tetraglyme. All compounds have been characterized by elemental analysis, IR and ¹H NMR as well as single crystal X-ray studies for 3, 4 and 6. Compounds 3 and 4 are covalent adducts with eight- and nine-coordinate barium, respectively. Compound 6 is an ionic compound where two tetraglyme ligands wrap the 10-coordinate barium cation in a helical fashion. The presence of DME actually allows the coordination number of barium in the mixed-ligand adducts 3 and 4 to be tuned. The average Ba–O bond lengths (2.80 for 3 to 2.87 Å for 6) reflect the coordination number of the metal. The same observation is valid for the average Ba–I bond distance, 3.442 for 3 vs. 3.536 Å for 4.     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

Formation and skeletal transformations of perfluoroindan-1-one and perfluoroindan-1,3-dione in the reaction of perfluoroindan with SiO2/SbF5

Perfluoroindan-1-one (2) is obtained in the reaction of perfluoroindan (1) with SiO₂/SbF₅ at 70 °C. Compound 1 heated with SiO₂/SbF₅ at 130 °C and then treated with water, gives 3-hydroxy-perfluoro-3-methylphthalide (4). Ketone 2 is converted, under the action of SbF₅ at 130 °C, to perfluoro-2-ethylbenzoic acid (9) and disproportionates to compound 1 and perfluoroindan-1,3-dione (3); the latter is transformed to phthalide 4 under the reaction conditions.