Synthesis of podophyllotoxin analogues: δ-lactone-containing picropodophyllin, podophyllotoxin and 4′-demethyl-epipodophyllotoxin derivatives

Non-epimerizable cis and trans δ-lactone analogues of podophyllotoxin have been prepared. Thus the synthesis of the cis isomer 4 has been achieved in 8 steps and 4% overall yield from podophyllotoxin 1 via the reduction of the γ lactone ring into the trans diol, selective protection of the 4-OH and 11-OH as a benzylidene acetal, and Wittig elongation at C-13 with inversion of configuration at C-2. Same elongation at C-13 but via the formation of a mesylate and introduction of a cyano group, led to the trans δ-lactone 5 (7 steps from 1 and 6% overall yied) with a small amount of its C-4 epimer 6. The synthesis of non-epimerizable δ-lactone analogues of 4′-demethyl-epipodophyllotoxin 7 and of 4-demethyl podophyllotoxin 8 are also reported. The synthesis of 7 and 8 was based upon the reduction of the γ-lactone ring of 4′-demethyl-4-epipodophyllotoxin followed by selective protection at C-11 and elongation at C-13. (8-15% and 4% overall yields). Compounds 4, 5 and 7 did not display relevant cytotoxicity in vitro against L1210 murine leukemia.     

Oxidation of natural targets by dioxiranes. Part 6: on the direct regio- and site-selective oxyfunctionalization of estrone and of 5α-androstane steroid derivatives

Using methyl(trifluoromethyl)dioxirane (1b), 3β,6α,17β-triacetoxy-5α-androstane (6) could be selectively transformed into its C-14 hydroxy derivative (7) and into the valuable C-12 ketone steroid (8), in high yields under mild reaction conditions. Similarly, the oxidation of 3α-estrone acetate (4) with 1b was carried out to yield selectively the steroid C-9 hydroxy derivative (5). The high regio- and site-selectivity attained demonstrates that the powerful dioxirane 1b is the reagent of choice to synthesize valuable oxyfunctionalized steroid derivatives.     

First total synthesis of modiolide A, based on the whole-cell yeast-catalyzed asymmetric reduction of a propargyl ketone

While the first total synthesis of modiolide A (1a), a 10-membered ring lactone with a marine-origin was achieved, an important chiral building block for constructing the chirality at C-4 in 1a, (S)-6-[(4-methoxybenzyl)oxy]-1-trimethylsilyl-1-hexyn-3-ol (3a) was obtained in as high as 96.1% ee. Asymmetric reduction of a silylated propargyl ketone (5) mediated by whole-cell of Pichia minuta IAM 12215 was established. This yeast-mediated reduction was also applicable to provide stereochemically pure (3S,5R)-5-[(4-methoxybenzyl)oxy]-1-trimethylsilyl-1-hexyn-3-ol (15), a synthetic intermediate for the related 10-membered lactone, tuckolide (16).     

Cespitulins A-D, novel diterpenoids from Taiwanese Cespitularia taeniata

Four novel diterpenoids, designated cespitulins A-D (1-4) were isolated and characterized from the Taiwanese soft coral Cespitularia taeniata. Their structures were determined by extensive spectroscopic analyses (¹H-¹H COSY, HMQC, HMBC, NOESY). Compounds 1-4 possess an unprecedented bond cleavage between C-9 and C-10 with a hemiacetalic lactone ring rather than a verticillane skeleton.     

Thermal rearrangements of tetrahydroimidazo[1,5-b]isoxazole-2,3-dicarboxylates. Synthesis of 3H-imidazol-1-ium ylides and their silver derivatives

Isoxazolines 2 from the cycloaddition of imidazoline 3-oxides 1 with DMAD undergo rearrangement to 3,4-dihydro-2H-imidazol-1-ium-1-(1,2-bis-methoxycarbonyl-2-oxo-ethanides) 3, which spontaneously undergo elimination to give 3H-imidazol-1-ium-1-(1,2-bis-methoxycarbonyl-2-oxo-ethanides) 5 or 1H-imidazoles 6 when heated in toluene at reflux. The presence of the aromatic ring at C-6 decelerated the conversion and enhanced the yield of 5. Solvents more polar than toluene (e.g., DMSO) provided quantitative conversion of 2 into 6 in mild conditions, while in less polar solvents such as CCl₄, the reaction rate was lowered and the yield of 5 enhanced. C-2 unsubstituted ylides 5 were treated with Ag₂O or AgNO₃ in the presence of Et₃N at room temperature to give C-2 metallated derivatives 9 in excellent yields.     

Structures of enzymatic oxidation products of epigallocatechin

To understand the structures of uncharacterized black tea polyphenols, the oxidation products of (−)-epigallocatechin were investigated. Enzymatic oxidation and subsequent heating of the reaction mixture afforded four new oxidation products (6, and 9–11) along with theasinensins C (4) and E (5), dehydrotheasinensin E (12), epitheaflagallin, hydroxytheaflavin, and desgalloyl oolongtheanin. The structures of the new compounds were determined chemically and spectroscopically. Isotheasinensin E (6) is a C-2 epimer of 5, and compounds 9 and 10 are oxidation products of 12. Another new compound, 11, is a yellow pigment and presumed to be a degradation product of proepitheaflagallin. The results disclosed new oxidation mechanisms that occur during black tea production.     

Leptogorgolide, a biogenetically interesting 1,4-diketo-cembranoid that reinforces the oxidation profile of C-18 as taxonomical marker for octocorals

The cembranoid 1 and the furanocembranolides 2-4 along with the known pukalide were isolated from Leptogorgia sp. and their structures determined spectroscopically. The 1,4-diketo-cembranoid 1 follows an oxidation pattern of C-18 that reinforces the concept of oxidation profile of C-18 as taxonomical marker for octocorals. The co-occurrence within a species of furanocembranolide/1,4-diketo-cembranoid congeners 1/2-4 raises the question about which one is the biogenetic precursor. A biogenetic pathway is proposed.     

Sodium dithionite initiated reactions of 1-bromo-1-chloro-2,2,2-trifluoroethane with enol ethers of cyclic ketones

Sodium dithionite initiated reactions of 1-bromo-1-chloro-2,2,2-trifluoroethane (1) with methyl and trimethylsilyl ethers of cyclopentanone and cyclohexanone enols (2a-d) in a MeCN/H₂O system were investigated. 2-(2,2,2-Trifluoroethylidene)cyclopentanone (4a) and 2-(2,2,2-trifluoroethylidene)-cyclohexanone (4b), respectively, were obtained as the main products and isolated in reasonable yields. The reaction with a 1:1 mixture of 5- and 3-methyl substituted 1-methoxycyclohexenes, 2e and 2f, revealed strong influence of steric hindrance on the reaction rate; a mixture of 2-(2,2,2-trifluoroethylidene)-5-methylcyclohexanone (6) and 2-(2,2,2-trifluoroethylidene)-3-methylcyclohexanone (7) in a 9:1 ratio was formed. Ketones 4a and 4b were reduced to the corresponding alcohols 8 and 9 and the reaction of 4b with hydrazine gave an indazole derivative 10.     

Synthesis of naturally occurring bioactive butyrolactones: maculalactones A-C and nostoclide I

Starting from citraconic anhydride (13), a simple multistep (9-10 steps) synthesis of naturally occurring butyrolactones maculalactone A (3), maculalactone B (1), maculalactone C (2) and nostoclide I (4) have been described with good overall yields via dibenzylmaleic anhydride (20) and benzylisopropylmaleic anhydride (27). The two anhydrides 20 and 27 were prepared by S_N2′ coupling reactions of appropriate Grignard reagents with dimethyl bromomethylfumarate (14), LiOH-induced hydrolysis of esters to acids, bromination of carbon-carbon double bond, in situ dehydration followed by dehydrobromination and chemoselective allylic substitution of bromoatom in disubstituted anhydrides 19 and 26 with appropriate Grignard reagents. The NaBH₄ reduction of these anhydrides 20 and 27 furnished the desired lactones 21 and 29, respectively. The lactone 21 on Knoevenagel condensation with benzaldehyde, furnished maculalactone B (1), which on isomerization gave maculalactone C (2). Selective catalytic hydrogenation of 1 gave maculalactone A (3). The conversion of lactone 29 to nostoclide I (4) is known.     

Synthesis of polyfunctionalized furans from 3-acetyl-1-aryl-2-pentene-1,4-diones

The BF₃-catalyzed cyclization of 3-acetyl-1-aryl-2-pentene-1,4-diones 1a-e in the presence of water in boiling tetrahydrofuran gave bis(3-acetyl-5-aryl-2-furyl)methanes 2a-e in 26-79% yields along with a small amount of 3-acetyl-5-aryl-2-methylfurans 3a-e. The exact structure of 2a was determined by X-ray crystallography. The use of a half volume of the solvent for the reaction of 1a resulted in the formation of 2,4-bis(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-phenylfuran (4) together with 2a and 3a. A similar reaction of 1a was carried out in the presence of 3-acetyl-5-(4-methylphenyl)-2-methylfuran (3d) to afford 4-(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-(4-methylphenyl)-2-methylfuran (5) in 49% yield. The BF₃-catalyzed reaction of 1a with 2,4-pentanedione in dry tetrahydrofuran at 23°C gave 3-(3-acetyl-5-phenyl-2-furfuryl)-4-hydroxy-3-penten-2-one (6a) and 3-(3-acetyl-2-methyl-4-phenyl-5-furyl)-4-hydroxy-3-penten-2-one (7a) in 66 and 24% yields, respectively. The product distribution depended on the reaction temperature. A similar reaction of 1b-e also yielded the corresponding trisubstituted furans 6b-e and tetrasubstituted furans 7b-e in good yields. These results suggested the presence of the furfuryl carbocation intermediate A during the reaction. The one-pot synthesis of 6a and 7a was also achieved by a similar reaction using phenylglyoxal. The deoxygenation of 1a with triphenylphosphine gave 3a in 88% yield, while 1a was treated with concentrated hydrochloric acid to yield 3-acetyl-2-chloromethyl-5-phenylfuran (8) which was quantitatively transformed in ethanol into 3-acetyl-2-ethoxymethyl-5-phenylfuran (9) and in water into 3-acetyl-5-phenylfurfuryl alcohol (10), respectively. In addition, the Diels-Alder reaction of cyclopantadiene with 1a gave the corresponding [4+2] cycloaddition products 11 and 12.     

Novel synthesis of 1-aryl-1-trifluoromethylallenes

3,3-Bis(phenylthio)-1,1,1,2,2-pentafluorobutane 1 was reacted with aryllithium reagents (6 equiv) in ether at low to room temperature for 1-6 h to provide 2-aryl-1,1,1-trifluoro-3-phenylthio-2-butene 2 in 80-96% yields. Bromination of 2 with NBS in acetonitrile at reflux for 1-7 h afforded the corresponding allylic bromides 3 in 61-96% yields. Treatment of 3 with MCPBA (1.5 equiv) in methylene chloride at reflux temperature for 1-12 h resulted in the formation of 1-aryl-1-trifluoromethylallenes 4 in 74-96% yields.     

A unique peroxide formation based on the Mn(III)-catalyzed aerobic oxidation

The autoxidation of a mixture of 1,1-diarylsubstituted alkenes 4 and 4-hydroxy-1H-quinolin-2-ones 5 in the presence of a catalytic amount of manganese(III) acetate dihydrate in air gave 3,3-bis(2-hydroperoxyethyl)-1H-quinoline-2,4-diones 6 in 31-91% yields together with [4.4.3]propellane-type cyclic peroxides 7 (10-34%). A similar aerobic oxidation of 3-substituted quinolinones 8 yielded cyclic peroxide derivatives 9 and/or 3-hydroperoxyethylated quinolinediones 10 depending on the substituent. The structures of the bis(hydroperoxide) 6 (R¹=Me, Ar=4-ClC₆H₄) and the [4.4.3]propellane 7 (R¹=Me, Ar=Ph) have been corroborated by X-ray crystallography.     

Efficient and selective synthesis of quinoline derivatives

The bromination reaction of 1,2,3,4-tetrahydroquinoline (7) was investigated by NBS and molecular bromine. One-pot synthesis is described for synthetically valuable 4,6,8-tribromoquinoline (3) and 6,8-dibromo-1,2,3,4-tetrahydroquinoline (6) on bromination of 1,2,3,4-tetrahydroquinoline (7) in efficient yields (75 and 90%, respectively). 6-Bromo- (4) and 6,8-dibromo-1,2,3,4-tetrahydroquinolines (6) were converted to 6-bromo- (1) and 6,8-dibromo quinolines (2), respectively, by aromatization with DDQ in 83 and 77% yields, respectively. Several novel trisubstituted quinoline derivatives were efficiently prepared via lithium-halogen exchange reactions of tribromide 3. Treatment of 4,6,8-tribromoquinoline with BuLi followed by quenching with electrophiles [Si(CH₃)₃Cl, S₂(CH₃)₂, I₂] regioselectively proceeded at C-4 and C-8 sites and afforded corresponding 4,8-disubstituted-6-bromoquinolines. Similarly, lithiation of tribromide 3 followed by addition of water to the intermediate produced 6-bromoquinoline in 65% yield. Copper-induced nucleophilic substitution of tribromide 3 with NaOMe afforded 4,6,8-trimethoxyquinoline (17) in 60% yield.     

Specific features of the reactions of quinazoline and its 4-hydroxy and 4-chloro substituted derivatives with C-nucleophiles

Reactions of quinazoline 1 with indole, pyrogallol and 1-phenyl-3-methylpyrazol-5-one in the presence of acid led to C-4 adducts 2, 3 and 5. Adduct 4 is formed by heating 1 with 1,3-dimethylbarbituric acid without acid catalysis. 1-Phenyl-3-methylpyrazol-5-one reacts with 1 without acid catalysis to form dipyrazolylmethane 6. 4-Chloroquinazoline 8 reacts with 1-phenyl-3-methylpyrazol-5-one to form 4-(1-phenyl-3-methyl-5-oxopyrazol-4-yl) quinazoline 9 and dipyrazolylmethane 6. Heating 8 with 2-methylindole leads to the formation of 4-(2-methylindol-3-yl) quinazoline 10 and tris(2-methylindol-3-yl)methane 11.     

[4+2] Cycloaddition of 1-phosphono-1,3-butadiene with azo- and nitroso-heterodienophiles

Under microwave activation, diethyl 1-phosphono-1,3-butadiene (1) reacted with t-butyl azodicarboxylate (2) and o-nitrosotoluene (5) to furnish quantitatively [4+2] cycloadducts, 3-phosphono-3,6-dihydro-1,2-pyridazine (3) and 6-phosphono-3,6-dihydro-1,2-oxazine (6), respectively. Selective oxidation and/or reduction of 6 led to functionalized δ-aminophosphonic derivatives in cyclic (7, 8) and aliphatic series (9, 10). Intermediate 10 may be cyclized into 2-phosphono-2,5-dihydro-1-pyrrole (12).     

Manganese(III)-based oxidation of 1,2-disubstituted pyrazolidine-3,5-diones in the presence of alkenes

The manganese(III)-catalyzed aerobic oxidation of 1,2-disubstituted pyrazolidine-3,5-diones 1 in the presence of alkenes 2 gave the corresponding pyrazolidinediones 3 which were doubly hydroperoxyalkylated at the 4-position in high yields. On the other hand, pyrazolidinediones 1 were oxidized with manganese(III) acetate in the presence of alkenes 2 at elevated temperature to produce the 4,4-bis(alkenyl)pyrazolidinediones 4 in good yields instead of the pyrazolidine-fused dihydrofuran analogue IV. A similar cerium(IV)-mediated oxidation of pyrazolidinedione 1a with an alkene 2a afforded the doubly 4-methoxyethylated derivative 5. The stability of the free hydroperoxyl group and the reaction pathway for the aerobic and the metal-mediated oxidation reactions were also discussed.     

Reaction of azulene with 1,2-bis[4-(dimethylamino)phenyl]-1,2-ethanediol in a mixed solvent of methanol and acetonitrile in the presence of hydrochloric acid: a facile one-pot synthesis and properties of new triarylethylenes possessing an azulen-1-yl group

Reaction of azulene (1) with 1,2-bis[4-(dimethylamino)phenyl]-1,2-ethanediol (2) in a mixed solvent of methanol and acetonitrile in the presence of 36% hydrochloric acid at 60 °C for 3 h gives 2-(azulen-1-yl)-1,1-bis[4-(dimethylamino)phenyl]ethylene (3) (8% yield), 1-(azulen-1-yl)-(E)-1,2-bis[4-(dimethylamino)phenyl]ethylene (4) (28% yield), and 1,3-bis{2,2-bis[4-(dimethylamino)phenyl]ethenyl}azulene (5) (9% yield). Besides the above products, this reaction affords 1,1-di(azulen-1-yl)-2,2-bis[4-(dimethylamino)phenyl]ethane (6) (15% yield), a meso form (1R,2S)-1,2-di(azulen-1-yl)-1,2-bis[4-(dimethylamino)phenyl]ethane (7) (6% yield), and the two enantiomeric forms (1R,2R)- and (1S,2S)-1,2-di(azulen-1-yl)-1,2-bis[4-(dimethylamino)phenyl]ethanes (8) (6% yield). Furthermore, addition reaction of 3 with 1 under the same reaction conditions as the above provides 6, in 46% yield, which upon oxidation with DDQ (=2,3-dichloro-5,6-dicyano-1,4-benzoquinone) in dichloromethane at 25 °C for 24 h yields 1,1-di(azulen-1-yl)-2,2-bis[4-(dimethylamino)phenyl]ethylene (9) in 48% yield. Interestingly, reaction of 1,1-bis[4-(dimethylamino)phenyl]-2-(3-guaiazulenyl)ethylene (11) with 1 in a mixed solvent of methanol and acetonitrile in the presence of 36% hydrochloric acid at 60 °C for 3 h gives guaiazulene (10) and 3, owing to the replacement of a guaiazulen-3-yl group by an azulen-1-yl group, in 91 and 46% yields together with 5 (19% yield) and 6 (13% yield). Similarly, reactions of 2-(3-guaiazulenyl)-1,1-bis(4-methoxyphenyl)ethylene (12) and 1,1-bis{4-[2-(dimethylamino)ethoxy]phenyl}-2-(3-guaiazulenyl)ethylene (13) with 1 under the same reaction conditions as the above provide 10, 2-(azulen-1-yl)-1,1-bis(4-methoxyphenyl)ethylene (16), and 1,3-bis[2,2-bis(4-methoxyphenyl)ethenyl]azulene (17) (93, 34, and 19% yields) from 12 and 10 and 2-(azulen-1-yl)-1,1-bis{4-[2-(dimethylamino)ethoxy]phenyl}ethylene (18) (97 and 58% yields) from 13.     

A facile chemoenzymatic approach to natural cytotoxic ellipsoidone A and natural ellipsoidone B

Starting from citraconic anhydride (3) a facile four-step synthesis of deoxyellipsoidone 8 has been reported with 37% overall yield. An elegant six-step access to naturally occurring cytotoxic ellipsoidone A (1) and ellipsoidone B (2) has been reported with good overall yields, via the conversion of itaconic anhydride (9) to the acetoxymethylmaleic anhydride (11), regioselective sodium borohydride reduction of anhydride 11 to acetoxymethylbutyrolactone 12, Knoevenagel condensation of lactone 12 with 5-methylfurfural, selenium dioxide induced oxidation of the formed butenolide 13 and an Amano PS catalyzed deacylation of the formed diacetoxybutenolide 14 as a pathway.     

An efficient method for the synthesis of 1-chlorophenazines based on the selective cathodic reduction of 3,3,6,6-tetrachloro-1,2-cyclohexanedione

An efficient method for the synthesis of 1-chlorophenazines has been established. It is based on the use of 3,6,6-trichloro-2-hydroxy-2-cyclohexen-1-one 4 as a synthetic equivalent of 3-chloro-1,2-benzoquinone 3. The intermediate 4 was prepared in near quantitative yield by electroreductive monodechlorination of 3,3,6,6-tetrachloro-1,2-cyclohexanedione 1, which is an inexpensive and easily available starting material. Efficient reactions of 4 with primary 1,2-phenylenediamines provided the corresponding 1,1,4-trichloro-1,2,3,4-tetrahydrophenazines 6, which were directly aromatized by treatment with 2,6-lutidine to give the title compounds in high yields. X-ray crystallographic structures for 1,1,4-trichloro-1,2,3,4-tetrahydro-6-methylphenazine 6f, 8-benzoyl-1,1,4-trichloro-1,2,3,4-tetrahydro-phenazine 6ea, and 1,7-dichlorophenazine 10db have been determined.     

A novel strategy towards the atorvastatin lactone

We describe a novel strategy to the atorvastatin lactone based on a Paal-Knorr synthesis of pyrrole 24 by condensing diketone 23 with primary amine 22. The latter contains the syn-1,3-diol subunit and a benzyl ether function at the other end of the chain. This allowed for manipulations on the pyrrole ring via iodination at C2, metalation with t-BuLi and carboxylation. The obtained acid 26 could be converted via amide formation, debenzylation, oxidation and lactonization to atorvastatin lactone 6. The key building block, 2-((4R,6S)-6-(2-(benzyloxy)ethyl)-2,2-dimethyl-1,3-dioxan-4-yl)ethanamine (22) was obtained by two sequential asymmetric transfer hydrogenative carbonyl allylations according to Krische.