Zn-promoted regio- and sequence-selective one-pot joining reactions of three components: vinylpyridines, alkyl iodides, and carbonyl compounds (or nitriles)

Addition of alkyl iodides (3) into the solution containing 2-(or 4-)vinylpyridine (1 or 2) and carbonyl compounds (6) in the presence of Zn-powder (99.9%) in acetonitrile under refluxing brought about regio- and sequence-selective joining reaction of three components to give the corresponding (2-hydroxyethyl)pyridines (7 or 8) in good to moderate yields. On the other hand, 2-(2- or 4-pyridyl)ethyl alkyl ketones (10 or 11) were obtained from the similar joining reaction of three components by addition of alkyl iodides (3) into the solution of 2-(or 4-)vinylpyridine (1 or 2), and nitriles (9) in toluene containing Zn-powder (99.9%) under the similar reaction conditions.     

Photobehaviour of 2- and 3-heteroaryl substituted o-divinylbenzenes; formation of fused 2,3- and 3,2-heteroareno-benzobicyclo[3.2.1]octadienes and 3-heteroaryl benzobicyclo[2.1.1]hexenes

New β-3-thienyl (8) and β-3-furyl derivatives of o-divinylbenzene (9) have been synthesised and their photochemical behaviour compared with 2-thienyl (7) and 2-furyl derivatives (2). Whereas the β-(2-heteroaryl) substituted o-divinylbenzenes (7 or 2) give only bicyclo[3.2.1]octadiene structure (14 or 1) by 1,6-ring closure of the biradical intermediate, β-(3-heteroaryl) substituted o-divinylbenzenes (8 or 9) give bicyclo[3.2.1]octadiene structure (23 or 24) and bicyclo[2.1.1]hexene structure (25 or 26) by 1,6- and 1,4-ring closure, respectively. This photochemical approach provides a simple method to 2,3- and 3,2-fused thiophene and furan polycyclic compounds.     

Microwave-assisted synthesis of novel bis(2-thioxothiazolidin-4-one) derivatives as potential GSK-3 inhibitors

(5Z,5′Z)-3,3′-(1,4-Phenylenebis(methylene)-bis-(5-arylidene-2-thioxothiazolidin-4-one) derivatives (5a-r) have been synthesized by the condensation reaction of 3,3′-(1,4- or 1,3-phenylenebis(methylene))bis(2-thioxothiazolidin-4-ones) (3a,b) with suitably substituted aldehydes (4a-f) or 2-(1H-indol-3-yl)2-oxoacetaldehydes (8a-c) under microwave conditions. The bis(2-thioxothiazolidin-4-ones) were prepared from the corresponding primary alkyl amines (1a,b) and di-(carboxymethyl)-trithiocarbonyl (2). The 2-(1H-indol-3-yl)-2-oxoacetaldehydes (8a-c) were synthesized from the corresponding acid chlorides (7a-c) using HSnBu₃.     

Boron coordination compounds derived from 2-phenyl-benzimidazole and 2-phenyl-benzotriazole bidentate ligands

The syntheses and structural analyses of a series of boron heterocycles derived from 2-(1H-benzimidazol-2-yl)-phenylamine (1), 2-(1H-benzimidazol-2-yl)-phenol (2), 2-(1H-benzimidazol-2-yl)-benzenedisulfide (3), 2-[3-(1,1,1,3,-tetramethyl-butyl)-phenyl]-2H-benzotriazole (4), 2-[3,5-bis-(1-methyl-1-phenylethyl)-phenyl]-2H-benzotriazole (5) and (C₆H₅)₂BOH or BF₃·OEt₂ are reported. The new boron compounds: diphenyl-[2-(1H-benzimidazol-2-yl-κN)-phenylamide-κN]-boron (6), diphenyl-[2-(1H-benzimidazol-2-yl-κN)-phenolate-κO]-boron (7), diphenyl-[2-(1H-benzimidazol-2-yl-κN)-benzenethiolate-κS]-boron (8), diphenyl-[2-(2H-benzotriazol-2-yl-κN)-4-(1,1,3,3-tetramethyl-butyl)-phenolate-κO]-boron (9), diphenyl-[2-(2H-benzotriazol-2-yl-κN)-4,6-(1-methyl-1-phenylethyl)-phenolate-κO]-boron (10), difluoro-[2-(1H-benzimidazol-2-yl-κN)-phenolate-κO]-boron (11), difluoro-[2-(2H-benzotriazol-2-yl-κN)-4-(1,1,3,3-tetramethylbutyl)-phenolate-κO]-boron (12) and difluoro-[2-(2H-benzotriazol-2-yl-κN)-4,6-(1-methyl-1-phenylethyl)-phenolate-κO]-boron (13) have four fused rings, with boron included in a six-membered ring and bound to N, O or S atoms and strongly coordinated by a nitrogen atom from the imidazole or triazole rings. Their structures are zwitterionic, with a negative charge on the boron and a delocalized positive charge on the ligand. Compounds 6-12 were studied by NMR, IR, mass spectrometry, and 6-10 and 12 by X-ray diffraction analyses.     

An efficient microwave assisted synthesis of novel class of Rhodanine derivatives as potential HIV-1 and JSP-1 inhibitors

(Z)-5-(2-(1H-Indol-3-yl)-2-oxoethylidene)-3-phenyl-2-thioxothiazolidin-4-one (7a-q) derivatives have been synthesized by the condensation reaction of 3-phenyl-2-thioxothiazolidin-4-ones (3a-h) with suitably substituted 2-(1H-indol-3-yl)-2-oxoacetaldehyde (6a-d) under microwave condition. The thioxothiazolidine-4-ones were prepared from the corresponding aromatic amines (1a-e) and di-(carboxymethyl)-trithiocarbonyl (2). The aldehydes (6a-h) were synthesized from the corresponding acid chlorides (5a-d) using HSnBu₃.     

Synthesis of polyfunctionalized furans from 3-acetyl-1-aryl-2-pentene-1,4-diones

The BF₃-catalyzed cyclization of 3-acetyl-1-aryl-2-pentene-1,4-diones 1a-e in the presence of water in boiling tetrahydrofuran gave bis(3-acetyl-5-aryl-2-furyl)methanes 2a-e in 26-79% yields along with a small amount of 3-acetyl-5-aryl-2-methylfurans 3a-e. The exact structure of 2a was determined by X-ray crystallography. The use of a half volume of the solvent for the reaction of 1a resulted in the formation of 2,4-bis(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-phenylfuran (4) together with 2a and 3a. A similar reaction of 1a was carried out in the presence of 3-acetyl-5-(4-methylphenyl)-2-methylfuran (3d) to afford 4-(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-(4-methylphenyl)-2-methylfuran (5) in 49% yield. The BF₃-catalyzed reaction of 1a with 2,4-pentanedione in dry tetrahydrofuran at 23°C gave 3-(3-acetyl-5-phenyl-2-furfuryl)-4-hydroxy-3-penten-2-one (6a) and 3-(3-acetyl-2-methyl-4-phenyl-5-furyl)-4-hydroxy-3-penten-2-one (7a) in 66 and 24% yields, respectively. The product distribution depended on the reaction temperature. A similar reaction of 1b-e also yielded the corresponding trisubstituted furans 6b-e and tetrasubstituted furans 7b-e in good yields. These results suggested the presence of the furfuryl carbocation intermediate A during the reaction. The one-pot synthesis of 6a and 7a was also achieved by a similar reaction using phenylglyoxal. The deoxygenation of 1a with triphenylphosphine gave 3a in 88% yield, while 1a was treated with concentrated hydrochloric acid to yield 3-acetyl-2-chloromethyl-5-phenylfuran (8) which was quantitatively transformed in ethanol into 3-acetyl-2-ethoxymethyl-5-phenylfuran (9) and in water into 3-acetyl-5-phenylfurfuryl alcohol (10), respectively. In addition, the Diels-Alder reaction of cyclopantadiene with 1a gave the corresponding [4+2] cycloaddition products 11 and 12.     

1-Nitratoethyl-5-nitriminotetrazole derivatives - Shaping future high explosives

1-(2-Nitratoethyl)-5-nitriminotetrazole (2) was formed by the reaction of 1-(2-hydroxyethyl-5-aminotetrazole (1) and 100% HNO₃. Compound 1 was obtained by alkylation of 5-amino-1H-tetrazole. Next to the known byproduct 1-(2-hydroxyethyl)-5-nitriminotetrazole (3), a second one, 1-(2-nitratoethyl)-5-aminotetrazolium nitrate (4) was obtained and fully characterized. Nitrogen-rich salts such as the ammonium (5), hydroxylammonium (6), guanidinium (7), aminoguanidinium (8), diaminoguanidinium (9) and triaminoguanidinium (10) 1-(2-nitratoethyl)-5-nitriminotetrazolate were prepared by deprotonation or metathesis reactions. The reaction of 2 and diaminourea yielded 1-(2-nitratoethyl)-5-aminotetrazole (11). Compounds 4-11 were fully characterized by single crystal X-ray diffraction, vibrational spectroscopy (IR and Raman), multinuclear NMR spectroscopy, elemental analysis and DSC measurements. The heats of formation of 5-10 were calculated by the atomization method based on CBS-4M enthalpies. Regarding the possible application of these compounds as energetic materials or high explosives, several detonation parameters such as the detonation pressure, velocity, energy and temperature were computed using the EXPLO5 code and the X-ray densities as well as the computed heats of formation. In addition the sensitivities towards impact, friction and electrical discharge were tested using the BAM drophammer, a friction tester as well as a small scale electrical discharge device.     

Synthesis of a new class of azathia crown macrocycles containing two 1,2,4-triazole or two 1,3,4-thiadiazole rings as subunits

A series of new 1,2/1,3-bis[o-(N-methylidenamino-5-aryl-3-thiol-4H-1,2,4-triazole-4-yl)phenoxy]alkane derivatives 3a-d and bis[o-(N-methylidenamino-2-thiol-1,3,4-thiadiazole-5-yl)phenoxy]alkanes 6a-c were prepared by condensation of 4-amino-5-(aroyl)-4H-1,2,4-triazole-3-thiols 2a-b or 2-amino-5-mercapto-1,3,4-thiadiazole with bis-aldehydes 1a-c. Further reaction of compounds 3a-d and 6a-c with dibromoalkanes afforded the new macrocycles 5a-f and 8a-d. The cyclization does not require high dilution techniques and provides the expected azathia macrocycles in good yields, ranging from 55% to 68%.     

Benzotriazole-mediated alkoxyalkylation and acyloxyalkylation

Reactions of readily available and stable 1-(α-alkoxyalkyl)benzotriazoles type 9a,b and 10a-d with a variety of silyl enol ethers 11 or 1,3-dicarbonyl compounds 13 give the expected ketones 12a-l (60-92%), β-keto esters 14a,b (62-67%), and malonates 14c,d (79-88%) in which a tetrahydrofuran or tetrahydropyran moiety has been introduced at the α position. 1-(Benzotriazol-1-yl)alkyl esters 7 are converted by cyanide anion into cyanohydrin esters 15a-i (55-98%).     

Columnar/smectic metallomesogens derived from heterocyclic benzoxazoles

The synthesis, mesomorphic behavior, and optical properties of two new series of metal complexes 1a,b-M (M=Pd, Cu, Zn) derived from benzoxazoles 2a,b are reported. The crystal and molecular structures of mesogenic 5-decyloxy-2-(6-decyloxybenzooxazol-2-yl)phenol and nonmesogenic bis[5-octyloxy-2-(6-octyloxybenzooxazol-2-yl) phenol]Pd(II) were determined by means of X-ray structural analysis. Two benzoxazoles 2a exhibited monotropic SmA phases, and all benzoxazoles 2b were nonmesogenic. On the other hand, metal complexes 1a-M exhibited distinctly different mesomorphism from complexes 1b-M. Complexes 1a-Pd formed SmC phases; complexes 1a-Cu and 1a-Zn formed crystal phases. In contrast, complexes 1b-Zn exhibited columnar phases, and complexes 1b-Cu and 1b-Pd were nonmesogenic. The difference of the mesomorphism in 1a-M and 1b-M was probably attributed to the geometry and/or the overall molecular shape created by 2a and 2b. The electronic configuration of metal ion might play an important role in forming the mesophases. The fluorescent properties of these compounds were also examined.     

The conversion of 2-cyano cyanothioformanilides into 3-aminoindole-2-carbonitriles using triphenylphosphine

2-Cyano cyanothioformanilide 3a reacts with triphenylphosphine in the presence of water to give 2-(cyanomethyleneamino)benzonitrile 4a, 2-(cyanomethylamino)benzonitrile 5, 3-aminoindole-2-carbonitrile 2a and (2-cyanoindol-3-yl)iminotriphenylphosphorane 6a. In the presence of p-toluenesulfonic acid in MeOH the reaction between 2-cyano cyanothioformanilide 3a and triphenylphosphine (2 equiv) gives 3-aminoindole-2-carbonitrile 2a in 90% yield. Under the same conditions 2-(cyanomethyleneamino)benzonitrile 4a gives anthranilonitrile 8a, 3-aminoindole-2-carbonitrile 2a and N-(2-cyanophenyl)formamide 9. In addition, substituted 2-cyano cyanothioformanilides 3b-f react with triphenylphosphine and p-toluenesulfonic acid in MeOH to give 3-aminoindole-2-carbonitriles 2b-f in 63-75% yields. Under analogous conditions 2-cyano-4,5-dimethoxyphenyl cyanothioformanilide 2g gives only 4,5-dimethoxyanthranilonitrile 8g and 4,6,7-trimethoxyquinazoline-2-carbonitrile 14g, but in refluxing dry PhMe in the absence of p-toluenesulfonic acid 2-cyano-4,5-dimethoxyphenyl cyanothioformanilide 3g, (2-cyano-5,6-dimethoxyindol-3-yl)iminotriphenylphosphorane 6g and 2-(cyanomethyleneamino)-4,5-dimethoxybenzonitrile 4g are obtained. The structure of 2-(cyanomethyleneamino)-4,5-dimethoxybenzonitrile 4g is supported unambiguously via independent synthesis and comparison to the isomeric 6,7-dimethoxyquinazoline-2-carbonitrile 15. All new compounds are fully characterised and a tentative mechanism for the transformation of 2-cyano cyanothioformanilides to indoles is proposed.     

Reactions of guaiazulene with methyl terephthalaldehydate and 2-hydroxy- and 4-hydroxybenzaldehydes in methanol in the presence of hexafluorophosphoric acid: comparative studies on molecular structures and spectroscopic, chemical and electrochemical properties of monocarbocations stabilized by 3-guaiazulenyl and phenyl groups

Reaction of guaiazulene (1) with methyl terephthalaldehydate (2) in methanol in the presence of hexafluorophosphoric acid at 25 °C for 2 h under aerobic conditions gives (3-guaiazulenyl)[4-(methoxycarbonyl)phenyl]methylium hexafluorophosphate (5) in 94% yield. Similarly, reactions of 1 with 2-hydroxybenzaldehyde (3) and 4-hydroxybenzaldehyde (4) under the same reaction conditions as 2 give (3-guaiazulenyl)(2-hydroxyphenyl)methylium hexafluorophosphate (6) and (3-guaiazulenyl)(4-hydroxyphenyl)methylium hexafluorophosphate (7) in 89 and 97% yields, respectively. Comparative studies on the molecular structures as well as the spectroscopic, chemical and electrochemical properties of the monocarbocation compounds 5-7 stabilized by 3-guaiazulenyl and 4-(methoxycarbonyl)phenyl (or 2-hydroxy- or 4-hydroxyphenyl) groups are reported.     

Synthesis of functional Δ-1,3,5-oxazaphospholene and 2H-1,4,2-diazaphosphole complexes via catalytic ring expansion reactions of a 2H-azaphosphirene complex

Catalytically-induced ring expansion of 2H-azaphosphirene complex 1 using ferrocenium hexafluorophosphate and acetone (2), diethylketone (3), cyclohexanone (4), benzaldehyde (5) or para-hydroxy-benzaldehyde (6) furnished selectively the Δ³-1,3,5-oxazaphospholene complexes 7-11, whereas with ortho- and para-hydroxy- or ortho- and para-amino-substituted benzonitriles the 2H-1,4,2-diazaphosphole complexes 16-19 were obtained. Two further findings are noteworthy: (1) The significant decreased reaction time in the case of the sterically more demanding carbonyl derivatives 2-4 and (2) the formation of diastereomers in the case of 10 and 11 with a ratio of 8:1 and 9:1, respectively. All products were characterized by NMR, MS and elemental analysis and the configuration of complexes 7 and 10a were determined by X-ray single-crystal diffraction analysis.     

Cyclopalladation of enantiopure oxazolines having the prochiral CMe2 moiety at position 2 of the heterocycle

(R)-4-Ethyl-2-(1,1-dimethylpropyl)-2-oxazoline (1) and (S)-4-tert-butyl-2-(1,1-dimethylbutyl)-2-oxazoline (2) were synthesized in two steps from the corresponding enantiopure amino alcohols and acid chlorides in a total yield of 95% and 72%, respectively. (S)-2-(1-Adamantyl-1-methylethyl)-4-isobutyl-2-oxazoline (3) was obtained from adamantyl bromide and l-leucinol in five steps in a total yield of 82%. Reactions of oxazolines 1–3 with Pd(OAc)₂ in AcOH or CH₂Cl₂ followed by treatment with LiCl afforded the corresponding μ-Cl dimeric cyclopalladated complexes 15, 17, and 20 in good yield. Compounds 15, 17, and 20 reacted with PPh₃ to furnish the corresponding mononuclear complexes 16, 19, and 21. The ³¹P NMR spectra of trans(N,P) adducts 16, 19, and 21 contained signals of two diastereomers in a ratio of ca. 1.3:1.     

Synthesis of novel lariat azathia crown macrocycles containing two triazole rings and bis crown macrocycles containing four triazole rings

The 13-hydroxy macrocycles 7a-d were prepared in 40-50% yields by the condensation of 1,ω-bis(4-amino-1,2,4-triazol-3-ylsulfany)alkanes 2a-d with 1,3-bis(2-formyphenoxy)-2-propanol (9). Acylation of 7a-d with 2-chloroacetylchloride gave the corresponding esters 11a,b. Amination of 11a,b with different amines in acetone furnished exclusively the target lariat macrocycles 12a,b and 13 in 60-70% yields. Reaction of 2 equiv. of the macrocycles 11a,b with 1 equiv. of piperazine afforded the novel bis macrocyles 14a,b in 50-60% yields. Reduction of 7a-d with NaBH₄ afforded the corresponding 13-hydroxyazathia crown ethers 15a-d in 65-70% yields.     

Synthesis and structural chemistry of bis(pyridylimino)isoindolato-ruthenium complexes and their activity as mediators in the atom transfer radical polymerization (ATRP) of styrene

The reaction of the Bispyridyl Isoindole (BPI) type ligands L1 and L2 (L1 = 1,3-Bis(2-(4-tert-butylpyridyl)imino) isoindole, L2 = 1,3-Bis(2-(5-bromo)imino)-5,6-dimethylisoindole) with [Ru(μ-Cl)₂(cod)]_x in presence of triethylamine using coordinating solvents like acetonitrile, dimethyl sulfoxide or pyridine cleanly gave the complexes [{BPI(L1,L2)}Ru^II(Cl)(S)₂] (L1: S = acetonitrile (1), dimethyl sulfoxide (2), pyridine (3); L2: S = acetonitrile (4), dimethyl sulfoxide (5), pyridine (6)). In these complexes the BPI ligands meridionally coordinated to the ruthenium center as established by X-ray diffraction for complexes 3 and 6. The catalytic activity in the direct ATRP (Atom Transfer Radical Polymerization) of styrene was tested for complexes 1-6.     

Preparation of new pyrido[3,4-b]thienopyrroles and pyrido[4,3-e]thienopyridazines

Two new types of pyrido-fused tris-heterocycles (1a,b and 2a,b) have been prepared from 3-aminopyridine in five/six steps. A synthetic strategy for the preparation of the novel pyrido[3,4-b]thieno[2,3- and 3,2-d]pyrroles (1a,b) and pyrido[4,3-e]thieno[2,3- and 3,2-c]pyridazines (2a,b) has been studied. The Suzuki cross coupling of the appropriate 2- and 3-thienoboronic acids (3,4) and 4-bromo-3-pyridylpivaloylamide (9) afforded the biaryl coupling products (10,11) in high yields (85%). Diazotization of the hydrolysed (2-thienyl)-coupling product (12) and azide substitution gave the 3-azido-4-(2-thienyl)pyridine intermediate (72%, 14). 3-Azido-4-(3-thienyl)pyridine (15) was prepared by exchanging the previous order of reactions. The desired β-carboline thiophene analogues (1a,b) were obtained via the nitrene by thermal decomposition of the azido precursors (14,15). By optimising conditions for intramolecular diazocoupling, the corresponding pyridazine products (72-83%, 2a,b) were afforded.     

Amphiphilic perfluoroalkylated sulfones and sulfonate betaines

Two types of perfluoro alkyl-containing amphiphilic sulfones 7-9 and 13-15, respectively, and sulfonate betaines 23-32 were prepared using 2-[(perfluoroalkyl)methyl]oxiranes (1-3, R_F = C₄F₉, C₆F₁₃, C₈F₁₇) or 3-(perfluoroalkyl)propyl iodides (16 and 17, R_F = C₆F₁₃, C₈F₁₇) as the starting compounds. The overall yields of two-step syntheses were above 90%. The compounds 7-9 were prepared by the reaction of oxiranes 1-3 with 2-sulfanylethan-l-ol and subsequent oxidation of intermediate sulfides. Similarly, the amphiphiles 13-15 were obtained by analogous reaction of oxiranes 1-3 with thiomorpholine and subsequent oxidation of the sulfur atom in the morpholine ring. In the syntheses of betaines 23-32, the starting compounds 1-3 or 16 and 17 were first reacted with dimethylamine followed by the ring-opening reaction of the intermediate fluoroalkyl(dimethyl)amines with propane-1,3- or butane-1,4-sultones.     

Synthesis of 5-alkyl(or aryl)pyrrolo[1,2-a]quinoxalin-4(5H)-ones by denitrocyclisation of N-alkyl(or aryl)-1-(2-nitrophenyl)-1H-pyrrole-2-carboxamides. Evidence of a Smiles rearrangement

An efficient method for the synthesis of hitherto unknown alkyl(or aryl)pyrrolo[1,2-a]quinoxalin-4(5H)-ones 8a-g, 16 and 17 has been established. The method is based on the synthesis of the corresponding N-alkyl(or aryl)-1-(2-nitrophenyl)-1H-pyrrole-2-carboxamides 3a-c and 7a-c,e which undergo denitrocyclisation with NaH in DMF in 4.5 or 2 h. When 3a was treated with NaH in DMF for 30 min the product of a Smiles rearrangement, 9, was isolated. Under similar conditions but for 4.5 h 9 was converted into 8a. This confirms the involvement of a Smiles rearrangement during the denitrocyclisation process. Conversion of 3b into isomeric pyrroloquinoxalinones 12 and 13 confirms a process involving two pathways, direct denitrocylisation of 3b and Smiles rearrangement of 3b followed by denitrocylisation, respectively. Furthermore, denitrocylisation of 7d into pyrroloquinoxalinones 16 and 17 suggests that similar cyclisation pathways are followed by N-arylcarboxamides.     

A simple synthesis of 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles

A simple four-step synthesis of 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles 8 (or their 1H-pyrazol-3(2H)-one tautomers 8′) as the pyrazole analogues of histamine was developed. First, enamino lactam 3 was prepared as the key intermediate in two steps from 2-pyrrolidinone (1). Next, acid-catalysed ‘ring switching’ transformations of 3 with monosubstituted hydrazines 4 gave N-[(1-substituted 5-hydroxy-1H-pyrazol-4-yl)ethyl]benzamides 7a-k and N-[2-(2-heteroaryl-3-oxo-2,3-dihydro-1H-pyrazol-4-yl)ethyl]benzamides 7′l-o. Benzamides 7a-k and 7′l-o were finally hydrolysed by heating in 6 M hydrochloric acid to furnish 1-substituted 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles 8a-k and 4-(2-aminoethyl)-2-heteroaryl-1H-pyrazol-3(2H)-ones 8′l-o in good overall yields.