Synthesis of new tripodal receptors—a ‘PET’ based ‘off-on’ recognition of Ag

A new set of tripodal receptors based upon an aromatic platform have been synthesized in high yields. The compounds have been characterized by spectroscopic techniques and by single crystal X-ray crystallography. These receptors are found to have good extraction ability and high transport rate for Ag(I). The receptor with imine linkages exhibits weak fluorescence emission bands at λ_max=413 and 540 nm, upon excitation at λ_max=365 nm. The fluorescence spectrum of the receptor shows enhancement in the intensity of the signal at 413 nm on binding with the Ag⁺ cation. No such significant changes are observed with other metal ions. An absorption at ∼365 nm is typical of an intraligand (π-π^∗) transition involving the imine chromophore, which produces a weak emission band at 413 nm due to quenching caused by PET from a neighboring -OH group. Participation of OH group in coordination to the metal ion reduces PET and an enhancement of fluorescence intensity is observed, signaling recognition of the metal ion.     

Kinetics of acid catalyzed and Ag(I) catalyzed decomposition of peroxodisulfate in aqueous medium

The mechanism of acid catalyzed decomposition of peroxodisulfate, (S₂O) in aqueous perchlorate medium involves the hydrolysis of the species H₂S₂O₈ and HS₂O and the homolysis of the species H₂S₂O₈, HS₂O and S₂O at the O? O bond. The overall rate law when 1.4M > [HClO₄] > 0.1M is The constants k′ and k″ contain the hydrolysis and homolysis rate constants of HS₂O₈^? and H₂S₂O₈, respectively. With added Ag(I), the acid catalyzed and Ag(I) catalyzed reactions take place independently. Ag(I) catalyzed decomposition appears to involve the species AgS₂O (aq).     

Solvent effect on the thermodynamics of Ag(I) coordination to tripodal polypyridine ligands

An investigation on the thermodynamics of complex formation between Ag(I) ion and two tripodal ligands tris[(2-pyridyl)methyl]amine (TPA) and 6,6′-bis-[bis-(2-pyridylmethyl)aminomethyl]-2,2′-bipyridine (BTPA) has been carried out in the aprotic solvents dimethylsulfoxide (DMSO) and dimethylformamide (DMF) by means of potentiometry and titration calorimetry. The results for TPA are compared with those already obtained for other aliphatic tripodal polyamines. In general, the TPA ligand forms complexes less stable than 2,2′,2″-triaminotriethylamine (TREN) and tris(2-(methylamino)ethyl)amine (Me₃TREN) as a result of the combination of higher structural rigidity of TPA and lower σ-donor ability of pyridinic moieties with respect to primary and secondary amines. The same trend is found if the stability of Ag(I) complex with TPA is compared with that of tris(2-(dimethylamino)ethyl)amine (ME₆TREN), despite the pyridinic nitrogen is formally a tertiary one. Theoretical calculations run to explain the reasons of this weaker interaction indicate that this difference is due to solvation, rather than to steric or σ-donor effects. The ligand BTPA is able to form bimetallic species whose relative stability is largely influenced by the different solvation of Ag(I) ion in DMSO and DMF rather than by the difference in the dielectric constants of these two media.     

Novel probes based on coumarin-bisdithiocarbamate system for selective recognition of Ag(I) in aqueous solution

Research on Chemical Intermediates - Two novel fluorescent probes (C1, C2), comprising a coumarin moiety as fluorophore and a pair of dithiocarbamates as recognition sites, were designed and...     

Visual detection of silver(I) ions by a chromogenic reaction catalyzed by gold nanoparticles

We report on a novel method for visual detection silver(I) ion. It is based on the finding that Ag(I) ions are rapidly reduced by hydroquinone to form a shell of silver on the surface of gold nanoparticles (AuNPs) which act as catalysts for this reaction. This leads to a color change from red to yellow which can be seen with bare eyes. This scheme is sensitive and highly specific for Ag(I) ions. The detection limits are 5 μM for visual inspection and 1 μM for photometric readout, respectively. The method was successfully applied to the determination of Ag(I) ions in spiked lake water and soil.

Lateral flow test for visual detection of silver(I) based on cytosine-Ag(I)-cytosine interaction in C-rich oligonucleotides

The authors describe an oligonucleotide-based lateral flow test for visual detection of Ag(I). The assay is based on cytosine-Ag(I)-cytosine [C-Ag(I)-C] coordination chemistry to capture gold nanoparticle (AuNP) tags in the test zone. A thiolated C-rich oligonucleotide probe was immobilized on the AuNPs via gold-thiol chemistry, and a biotinylated C-rich oligonucleotide probe was immobilized on the test zone. The AuNPs labelled with C-rich oligonucleotides are captured by Ag(I) ions in the test zone through the C-Ag(I)-C coordination. The resulting accumulation of AuNPs produces a readily visible red band in the test zone. Under optimized conditions, the test is capable of visually detecting 1.0 ppb of Ag(I) which is 50 times lower than the maximum allowable concentration as defined by the US Environmental Protection Agency for drinking water. Hence, the test is inexpensive and highly sensitive. It was applied to the detection of Ag(I) in spiked samples of tap water and river water. In our perception, the test is a particularly valuable tool in limited resource settings.

Open image in new window

Graphical abstract Graphical Abstract

     

Selective and sensitive optical chemosensor for detection of Ag(I) ions based on 2(4-hydroxy pent-3-en-2-ylideneamine) phenol in aqueous samples

A selective and sensitive chemosensor, based on the 2(4-hydroxy pent-3-en-2-ylideneamine) phenol (HPYAP) as chromophore, has been developed for colorimetric and visual detection of Ag(I) ions. HPYAP shows a considerable chromogenic behavior toward Ag(I) ions by changing the color of the solution from pale-yellow to very chromatic-yellow, which can be easily detected with the naked-eye. The chemosensor exhibited selective absorbance enhancement to Ag(I) ions in water samples over other metal ions at 438 nm, with a linear range of 0.4–500 μM (r² = 0.999) and a limit of detection 0.07 μM of Ag(I) ions with UV–vis spectrophotometer detection. The relative standard deviation (RSD) for 100 μM Ag(I) ions was 2.05% (n = 7). The proposed method was applied for the determination Ag(I) ions in water and waste water samples.     

A selective chemosensor for detection of Ag(I) and Cu(I) based on an acenaphthoquinone derivative and its complexes

A new Schiff base, acenaphthoquinone bis(diphenylmethlenehydrazone) (L), was synthesized and employed as a chemosensor for detecting Ag(I) and Cu(I). Experimental results showed that the chemosensor exhibited high selectivity and sensitivity. The sensitivity of the chemosensor for Ag(I) or Cu(I) was not affected by other metal ions, such as Ni(II), Nd(III), Zn(II), Fe(III), Cu(II), Na(I), La(III), K(I), and Co(II). Complexes 1 and 2 were synthesized by coordination of L with Ag(I) and Cu(I), respectively. The crystal structures of 1 and 2 were determined by single-crystal X-ray diffraction. They had the same space group P2₁/c. Based on theoretical calculation, mechanism of the chemosensor detecting Ag(I) and Cu(I) was suggested.     

The silver(I)‐catalyzed exchange of coordinated cyanide in hexacyanoferrate(II) by phenylhydrazine in aqueous medium

The [Ag]⁺‐catalyzed exchange of coordinated cyanide in [Fe(CN)₆]^4? by phenylhydrazine (PhNHNH₂) has been studied spectrophotometrically at 488 nm by monitoring increase in the absorbance for the formation of cherry red colored complex [Fe(CN)₅PhNHNH₂]^3?. The other reaction conditions were pH 2.80±,0.02, temperature = 30.0 ± 0.1^°C, and ionic strength (I) = 0.02 M (KNO₃). The reaction was followed as a function of pH, ionic strength, temperature, [Fe(CN)^4?₆], [PhNHNH₂], [Ag⁺] by varying one variable at a time. The initial rates were evaluated for each variation using the plane mirror method. The initial rates evaluated as a function of [Fe(CN)^4?₆] clearly indicate that the initial rate increases with the increase in [Fe(CN)^4?₆] and finally reaches to a limiting value when [Fe(CN)^4?₆]/[AgNO₃] ? 1000. It indicates the formation of a strong adduct between [Fe(CN)₆]^4? and AgNO₃ prior to the abstraction of CN^?. The variation in initial rates with [PhNHNH₂] also showed limiting values at [Fe(CN)^4?₆]/[PhNHNH₂] ? 8.30. The complex behavior due to pH and [Ag⁺] variations on the rate has been explained in detail. The composition of the final reaction product [Fe(CN)₅PhNHNH₂] formed during the course of reaction has been found to be 1:1 using the mole ratio method. The evaluated values of activation parameters for the catalyzed reaction are E_a = 53.85 kJ mol^?1, Δ H^≠, = 51.33 kJ mol^?1, and Δ S^≠ = ?134.63 J K^?1 mol^?1, which suggest an interchange dissociative mechanism. A most plausible mechanistic scheme has been proposed based on the experimental observations. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 447–456, 2007     

Feasible fabrication of o-phenanthroline-based polymer adsorbent for selective capture of aqueous Ag(I)

Devising a desirable adsorbent for efficiently selective capture of Ag(I) from wastewater has attracted much attention but faced with huge challenges. Herein, a novel linear o-phenanthroline-based polymer l-PRL was prepared via chemical oxidative polymerization for the adsorption of Ag(I). The maximum adsorption capacity for Ag(I) by l-PRL is 325.8 mg/g at pH 0. In addition, l-PRL owes ascendant selectivity for Ag(I) from aqueous solutions containing various interfering metal ions of Pb(II), Co(II), Ni(II), Cd(II) and Fe(III). Multiple characterizations of FT-IR and XPS uncover that the N groups on l-PRL act as adsorption sites to coordinate with Ag(I). Density functional theory (DFT) calculations further evidence the mechanism that l-PRL is provided with the admirable adsorptivity and selectivity for Ag(I). It is mainly attributed to the most stable complexes of l-PRL with Ag(I), which possesses shortest Ag-N bond length compared with other heavy metal ions. Furthermore, 93.5% of initial adsorption capacity is reserved after four continuous regeneration cycles, indicating that l-PRL is equipped with superior recyclability and durability, and l-PRL is capable of removing Ag(I) in low-concentration actual Ag(I)-containing wastewater completely. This study shed light on the rational design of polymer adsorbents and in-depth insight into selective removal of aqueous Ag(I).     

Thiourea based novel chromogenic sensor for selective detection of fluoride and cyanide anions in organic and aqueous media

Novel chromogenic thiourea based sensors 4,4′-bis-[3-(4-nitrophenyl) thiourea] diphenyl ether 1 and 4,4′-bis-[3-(4-nitrophenyl) thiourea] diphenyl methane 2 having nitrophenyl group as signaling unit have been synthesized and characterized by spectroscopic techniques and X-ray crystallography. The both sensors show visual detection, UV-vis and NMR spectral changes in presence of fluoride and cyanide anions in organic solvent as well as in aqueous medium. The absorption spectra indicated the formation of complex between host and guest is in 1:2 stoichiometric ratios.     

Potentiometric determination of equilibrium constants for Ag(I)-pyridine,Ag(I)-2,2′-bipyridine and Ag(I)-1,10-phenanthroline systems in acetonitrile

The composition and the complex formation constants of Ag(I) with pyridine, 2,2′-bipyridine, and 1,10-phenanthroline were determined by the potentiometric method. The measurement procedure can be reduced to the determination of the EMF of the concentration cell: $$\begin{gathered} Ag|c_1 AgNO_3 (AN) + 0.1 M(C_2 H_5 )_4 NClO_4 (AN)||0.1 M(C_2 H_5 )_4 NClO_4 (AN) || \hfill \\ c_2 AgNO_3 (AN) + x L(AN) + 0.1 M (C_2 H_5 )_4 NClO_4 (AN)|Ag. \hfill \\ \end{gathered}$$ All complexes have coordination number 2. The solubility product for Ag(1,10-phenanthroline)₂NO₃ in acetonitrile was also determined. In all measurements the association of AgNO₃ was considered. Differences in the stability of analogous complexes in water and acetonitrile are discussed.     

Formation of mono-, bi-, tri-, and tetranuclear Ag(I) complexes of C3-symmetric tripodal benzimidazole ligands

The C3-symmetric tripodal ligand tris(2-benzimidazolylmethyl)amine (ntb) and its alkyl-substituted derivatives tris(N-R-benzimidazol-2-ylmethyl)amine (R = methyl, Mentb; R = ethyl, Etntb; R = propyl, Prntb) react with various silver(I) salts to afford mononuclear [Ag(Prntb)(CF3SO3)].0.25H2O, 1, binuclear [Ag2(Mentb)2](CF3SO3)2.H2O, 2, trinuclear [Ag3(Etntb)2](ClO4)3.CH3OH, 3, and tetranuclear [Ag4(ntb)2(CH3CN)2(CF3CO2)2](CF3CO2)2.2H2O, 4. All four complexes have been characterized by elemental analyses, IR spectroscopy, and X-ray crystallography. The Ag(I) ion in 1 is coordinated to the three imine nitrogen atoms of the Prntb ligand and one oxygen atom of the trifluoromethanesulfonate anion in a distorted tetrahedral environment. Dinuclear 2 has C2 symmetry with each Ag(I) atom trigonally coordinated by two arms of one Mentb and one arm of another. Trinuclear 3 has C3 symmetry with a Ag3 regular triangle sandwiched between a pair of Etntb ligands such that one arm of each ligand is involved in linear coordination about an Ag(I) atom. In the tetranuclear complex 4, two linearly coordinated Ag(I) atoms lying on the molecular C2 axis are bridged by a pair of ntb ligands and the remaining pendant arm of each ntb ligand is attached to another Ag(I) atom whose tetrahedral coordination sphere is completed by an acetonitrile molecule and a chelating trifluoroacetate anion. Complexes 2 and 3 may be regarded as an aggregation of two tridentate ligands by a silver dimer and a trinuclear cluster with weak Ag...Ag interactions, respectively, while in 4 the aggregation of two tripodal ligands by four Ag(I) ions affords a multicomponent internal cavity. The packing modes of complexes 1-3 are dominated by weak supramolecular pi...pi and CH...pi interactions. Hexagonal or square channels are generated in 1 and 2, and a honeycomb layer structure is formed in 3 with solvate molecules and counteranions occupying the voids. The crystal structure of 4 consists of a three-dimensional network consolidated by NH...O and OH...O hydrogen bonds.     

Kinetics and mechanism of silver(I) catalysed autoxidation of aqueous sulphur(IV) in acetate buffered medium

The kinetics of the silver(I) catalysed autoxidation of aqueous sulphur(IV) an acetate buffered medium obey the rate law: –d[S^IV]/dt = D[Ag^I][S^IV]²[H⁺]^–1/(B+C[S^IV]). The rate is independent of [O₂] but strongly inhibited by EtOH. A free radical mechanism is proposed.     

Electron-transfer kinetics of copper(II/I) tripodal ligand complexes

The electron-transfer kinetics for each of three copper(II/I) tripodal ligand complexes reacting with multiple reducing and oxidizing counter reagents have been examined in aqueous solution at 25 degrees C, mu = 0.10 M. For all of the ligands studied, an amine nitrogen serves as the bridgehead atom. Two of the ligands (PMMEA and PEMEA) contain two thioether sulfurs and one pyridyl nitrogen as donor atoms on the appended legs while the third ligand (BPEMEA) has two pyridyl nitrogens and one thioether sulfur. Very limited kinetic studies were also conducted on two additional closely related tripodal ligand complexes. The results are compared to our previous kinetic study on a Cu(II/I) system involving a tripodal ligand (TMMEA) with thioether sulfur donor atoms on all three legs. In all systems, the Cu(II/I) electron self-exchange rate constants (k(11)) are surprisingly small, ranging approximately 0.03-50 M(-)(1) s(-)(1). The results are consistent with earlier studies reported by Yandell involving the reduction of Cu(II) complexes with four similar tripodal ligand systems, and it is concluded that the dominant reaction pathway involves a metastable Cu(II)L intermediate species (designated as pathway B). Since crystal structures suggest that the ligand reorganization accompanying electron transfer is relatively small compared to our earlier studies on macrocyclic ligand complexes of Cu(II/I), it is unclear why the k(11) values for the tripodal ligand systems are of such small magnitude.     

A heptamethine cyanine-based colorimetric and ratiometric fluorescent chemosensor for the selective detection of Ag+ in an aqueous medium

A highly selective and sensitive ratiometric fluorescent chemosensor for Ag(+) in aqueous solution was developed, in a linear range of 0.6 × 10(-7) to 50 × 10(-7) mol L(-1), based on a A-Ag(+)-A binding mode with a heptamethine cyanine motif containing one adenine moiety.     

Spontaneous Cu(I)Br–PMDETA‐mediated polymerization of isobornyl methacrylate in heterogeneous aqueous medium at ambient temperature

Isobornyl methacrylate (IBMA), a bulky hydrophobic methacrylate, undergoes very fast polymerization, in bulk, with Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA)/ethyl‐2‐bromoisobutyrate system, at ambient temperature. IBMA also undergoes a spontaneous initiator‐free polymerization, at ambient temperature, with Cu(I)Br/PMDETA catalytic system in dimethyl sulfoxide–water mixtures. The rate of the polymerization is seen to increase with the water content up to 80 mol % of water. A possible intervention of air in initiation is proposed. The active Cu(0) formed by the disproportionation of Cu(I) species in aqueous medium probably plays a vital role for a possible air‐initiation of IBMA via single electron transfer‐living radical polymerization (SET‐LRP) mechanism. A high tolerance level to water under SET‐LRP conditions is demonstrated. The poly(IBMA) samples obtained exhibit low molecular weight distributions (1.1–1.3). Similar behavior was not observed with other common methacrylates such as methyl methacrylate, t‐butyl methacrylate, cyclohexyl methacrylate, and benzyl methacrylate. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Silver(I) complexes based on novel tripodal thioglycosides: synthesis, structure and antimicrobial activity

The reaction of tris(2-bromoethyl)amine hydrobromide with sugar thiols or thioacetates leads to the formation of novel carbohydrate substituted tripodal NS₃ ligands. Complexation with silver(I) ions gives stable complexes. NMR, X-ray, MS and EXAFS studies indicate their mononuclear C₃-symmetric structure. The highly water soluble complexes formed from the unprotected ligands show a wide spectrum of effective antimicrobial activities and their use lowers the cytotoxic and antiproliferative activities compared to the free silver salts.