Diastereoselectivity-Switchable Gold-Catalyzed Formal [3+2]-Cycloadditions of N-2,2,2-Trifluoroethylisatin Ketimines with Yne−Enones

The unexpected gold-catalyzed formal [3+2]-cycloaddition of N-2,2,2-trifluoroethylisatin ketimines with 2-(1-Alkynyl)-2-alken-1-ones is reported. Both diastereomers of the corresponding cycloadducts were formed in moderate to excellent yields with excellent diastereoselectivities by switching the catalytic system from mono-gold to gold/silver bimetallic catalytic system. The practicality of this protocol is demonstrated by scale-up reaction and the transformations of the cycloadduct.     

Synthesis of 2-ethoxyprop-2-enal dimethylhydrazone and its Diels-Alder reactions

Conditions were found for the preparation of 2-ethoxyprop-2-enal dimethylhydrazone by reaction of 2-ethoxypropenal with N,N-dimethylhydrazine. 2-Ethoxyprop-2-enal dimethylhydrazone reacted with methyl vinyl ketone and methyl acrylate according to the [4 + 2]-cycloaddition pattern with regioselective formation of substituted tetrahydropyridines. The major product in the reaction of 2-ethoxyprop-2-enal dimethylhydrazone with 1,4-benzoquinone was 5-hydroxy-1-benzofuran-2-carbaldehyde dimethylhydrazone formed as a result of [3 + 2]-cycloaddition; a small amount of the corresponding [4 + 2]-cycloaddition product was also obtained. Some spontaneous transformations of the primary cycloaddition products were revealed.     

Generation and reaction of tungsten-containing carbonyl ylides: [3 + 2]-cycloaddition reaction with electron-rich alkenes

Novel tungsten-containing carbonyl ylides 7, generated by the reaction of the o-alkynylphenyl carbonyl derivatives 1 with a catalytic amount of W(CO)(5)(thf), reacted with alkenes to give polycyclic compounds 5 through [3 + 2]-cycloaddition reaction followed by intramolecular C-H insertion of the produced nonstabilized carbene complex intermediates 8. In the presence of triethylsilane, these tungsten-containing carbene intermediates 8 were smoothly trapped intermolecularly by triethylsilane to give silicon-containing cycloadducts 17 with regeneration of the W(CO)(5) species. By this procedure, the scope of alkenes employable for this reaction was clarified. The presence of the tungsten-containing carbonyl ylide 7c was confirmed by direct observation of the mixture of o-ethynylphenyl ketone 1c and W(CO)(5)(thf-d(8)). Careful analysis of the intermediate by 2D NMR, along with the observation of the direct coupling with tungsten-183 employing the (13)C-labeled substrate, confirmed the structure of the ylide 7c. Examination using (E)- or (Z)- vinyl ether revealed that the [3 + 2]-cycloaddition reaction proceeded in a concerted manner and that the facial selectivity of the reaction differed considerably depending on the presence or absence of triethylsilane. These results clarified the reversible nature of this [3 + 2]-cycloaddition reaction.     

Platinum(II)-catalyzed reaction of 2-alkynylbenzoates or benzothioates with vinyl ethers: a concise method for synthesis of 1-acyl-4-alkoxy- or 1-acyl-4-alkylsulfanylnaphthalene derivatives

[reaction: see text] A concise method for the preparation of 1-acyl-4-alkoxy- or 1-acyl-4-alkylsulfanylnaphthalenes has been developed by the reaction of o-ethynylbenzoates or benzothioates with vinyl ethers, in the presence of a catalytic amount of PtCl(2). It is proposed that the reaction proceeds through [3 + 2]-cycloaddition of the platinum-containing carbonyl ylides followed by 1,2-alkyl migration.     

Rh(I)-catalyzed intramolecular allenic Pauson-Khand reaction: construction of a bicyclo[5.3.0]dec-1,7-dien-9-one skeleton

[reaction: see text] 1-Phenylsulfonylallenes possessing a hexynyl appendage in refluxing toluene in the presence of catalytic amount of rhodium(I) catalyst under a carbon monoxide atmosphere underwent regioselective formal [2 + 2 + 1]-cycloaddition to produce the corresponding bicyclo[5.3.0]dec-1,7-dien-9-one derivatives in acceptable yields.     

Synthesis of furanophane derivatives through [8+2]-cycloaddition of dienylisobenzofurans and alkynes

The coupling of various dienylisobenzofurans with dimethyl acetylenedicarboxylate (DMAD) has been examined. In most cases, this reaction proceeds via [8+2]-cycloaddition to afford furan-bridged decatetraene ring systems. The major competing reaction pathway is [4+2]-cycloaddition between DMAD and the isobenzofuran nucleus. Isobenzofuran intermediates were generated using either a chromium carbene-based method or an acid-catalyzed method.     

An unexpected [2+2]-cycloaddition reaction of 4-methyldithieno-[3,4-b:3′,2′-d]pyridinium iodide with dimethyl acetylenedicarboxylate

An unexpected [2+2]-cycloaddition occured in the reaction of 4-methyldithieno-[3,4-6:3′,2′-d]pyridinium iodide (3)with two equivalents of DMAD, giving 4-(trans-1,2-dicarbomethoxy-2- iodovinyl)-5-methyl-6,7-dicarbomethoxy-4,5-dihydrothieno [23-c]quinoline (4) in 54% yield. 4 is formed via 4-methyl-5-(trans-1,2-dicarbomethoxy-2-iodo-4,5-dihydrothieno [3,4-b:3′,2′-d]pyridine (16), followed by [2+2]-cycloaddition. The primary adduct rearranges via a thiepin to an episulfide which eliminates sulfur to give 4.     

Asymmetric [3+2]-Cycloaddition of Morita–Baylis–Hillman Carbonates with Maleimides Catalyzed by Chiral Ferrocenylphosphines

New chiral ferrocenylphosphines LB1–LB9 were designed and prepared through simple synthetic approaches. These air-stable ferrocenylphosphines were applied to promote asymmetric [3+2]-cycloaddition of Morita–Baylis–Hillman carbonates with maleimides, among which LB7 was shown to have good catalytic activity to afford the corresponding multifunctional cyclopentenes in up to 59% yield and up to 53% ee under mild reaction conditions. A plausible reaction mechanism was proposed.     

Highly enantioselective [4 + 2] cycloaddition reactions catalyzed by a chiral N-methyl-oxazaborolidinium cation

The reaction of lithium aryl borohydrides with salts of beta-amino alcohols provides a new route for the synthesis of oxazaborolidines. This method also leads to the first synthesis of hitherto elusive N-methyl oxazaborolidine cations, specifically the cationic proline derivative 3. Compound 3 is a strong chiral Lewis acid which is very effective for catalysis of [4 + 2]-cycloaddition reactions in good yield and with high enantioselectivity. Several diverse examples illustrate the scope of these catalytic reactions.     

Cyclobutane ring formation by triflic imide catalyzed [2+2]-cycloaddition of allylsilanes

Cyclobutane forming [2+2]-cycloaddition reactions of allylsilane with electron-deficient olefin is promoted by triflic imide (Tf₂NH). Triflic imide is converted in situ to silyl triflic imide (R₃SiNTf₂), which serves as the actual catalyst for this process. When these reactions take place at higher than ambient temperatures, thermodynamically more stable anti-cyclobutanes are generated preferentially by equilibration of the initially formed adducts via retro [2+2]-cycloaddition.     

Intramolecular [3 + 2]-cycloaddition reaction of push-pull dipoles across heteroaromatic pi-systems

[reaction: see text] Push-pull dipoles generated from the Rh(II)-catalyzed reaction of diazo imides containing tethered heteroaromatic rings undergo successful [3 + 2]-cycloaddition across the 2,3-pi-bond to provide novel pentacyclic compounds in good to excellent yields in a stereocontrolled fashion. The facility of the cycloaddition is critically dependent on conformational factors in the transition state.     

Cycloaddition chemistry of 2-vinyl-substituted indoles and related heteroaromatic systems

[reaction: see text] The intramolecular Diels-Alder cycloaddition reaction (IMDAF) of several N-phenylsulfonylindolyl-substituted furanyl carbamates containing a tethered pi-bond on the indole ring were examined as an approach to the iboga alkaloid catharanthine. Only in the case where the tethered pi-bond contained two carbomethoxy groups did the [4 + 2]-cycloaddition occur. Push-pull dipoles generated from the Rh(II)-catalyzed reaction of diazo imides, on the other hand, undergo successful intramolecular 1,3-dipolar cycloaddition across both alkenyl and heteroaromatic pi-bonds to provide novel pentacyclic compounds in good yield and in a stereocontrolled fashion. The facility of the cycloaddition was found to be critically dependent on conformational factors in the transition state. Ligand substitution in the rhodium(II) catalyst markedly altered the product ratio between [3 + 2]-cycloaddition and intramolecular C-H insertion. The variation in reactivity reflects the difference in electrophilicity between the various rhodium carbenoid intermediates. Intramolecular C-H insertion is enhanced with the more electrophilic carbene generated using Rh(II) perfluorobutyrate.     

Reactions with diazoazoles. Part IV. . [7 + 2]- and [11 + 2]-cyclocondensation reactions of diazoazoles with acyltriphenylphosphonium methylides to azolo[5,1-c][1,2,4]triazines

Acyltriphenylphosphoniummethylides react with diazoazoles in a [2 + 7]- or [2 + 11]-cycloaddition reaction followed by elimination of triphenylphosphane oxide to yield azolo[5,1-c][1,2,4]triazines.     

Synthesis of the benz[a]anthraquinone core of angucyclinone antibiotics

[reaction: see text] A general method for the synthesis of benz[a]anthraquinones is reported. The key step is a catalytic cobalt-mediated [2+2+2]-cycloaddition of a triyne, which affords an angularly substituted tetracycle. Oxidation of this core gives the typical structure of angucyclinone antibiotics.     

Stereoselective Insertion of Benzynes into Lawsones: Synthesis of Biologically Important Benzannulated Bicyclo[3.3.0]octanes

An ideal stereoselective insertion of in situ generated benzynes into lawsones through domino formal [2+2]-cycloaddition followed by rearrangement is disclosed. The reaction allowed for the preparation of biologically important benzannulated bicyclo[3.3.0]octanes in good yields and with excellent selectivities by using simple substrates and conditions.     

Click chemistry in CuI-zeolites: the Huisgen [3 + 2]-cycloaddition

[reaction: see text] CuI-exchanged solids based on zeolite materials were investigated for the first time as catalysts in organic synthesis. The catalytic potential of these materials was evaluated in the Huisgen [3 + 2]-cycloaddition. Five CuI-exchanged zeolites were examined and CuI-USY proved to be a novel and efficient heterogeneous ligand-free catalyst for this "click chemistry"-type transformation.     

Asymmetric Synthesis of Bicyclic Pyrazolidinones through Alkaloid-Catalyzed [3+2]-Cycloadditions of Ketenes and Azomethine Imines

A versatile asymmetric synthesis of bicyclic pyrazolidinones through alkaloid-catalyzed formal [3+2]- and [3+2+2]-cycloadditions of ketenes with azomethine imines is described. The methodology was found to be tolerant of ketene and a variety of monosubstituted ketenes (R=alkyl, OAc). The products were formed in good to excellent yields (71–99 % for 24 examples, 39 examples in all), with good to excellent diastereoselectivity in many cases (dr 3 : 1 to 27 : 1 for 22 examples), and with excellent enantioselectivity for most examples (≥93 % ee for 34 products). In the case of most disubstituted ketenes, the reaction proceeded through a [3+2+2]-cycloaddition to form structurally interesting bicyclic pyrazolo-oxadiazepinediones with moderate diastereoselectivity (dr up to 3.7 : 1) and as racemic mixtures (3 examples). The method represents the first unambiguous example of an enantioselective reaction between ketenes and a 1,3-dipole.     

Organocatalytic intermolecular [2+2] cycloaddition of norbornadienes by a stable organic radical compound

An organocatalytic [2+2] cycloaddition reaction of norbornadienes (NBDs) using catalytic amount of TEMPO was reported. Single crystal X-ray diffraction of the product revealed its detailed multicyclic structure containing a 4-membered ring, formed in intermolecular reaction. Addition of AIBN to the current catalytic system improved the product yield. Quantitative reaction of the NBD and TEMPO gave a 2:2 adduct of NBD and TEMPO, which was confirmed by HR-MS. This catalytic [2+2] addition of NBDs has great advantage in selective intermolecular coupling in comparison with [2+2] photocycloaddition.     

Solid-supported [2+2+2] cyclotrimerizations

The transition-metal-catalyzed [2+2+2] cyclotrimerization of a diyne and an alkyne provides a convergent route to highly-substituted aromatic rings. This reaction possesses distinct drawbacks, especially low chemo- and regioselectivities, which hamper its application in combinatorial synthesis. These problems have been solved by the development of solid-supported [2+2+2]-cycloaddition reactions. If conducted on a solid-support, this reaction enables rapid combinatorial access to diverse sets of carbo- and heterocyclic small-molecule arrays. The scope of this methodology has been investigated by examining different immobilization strategies, different diyne precursors, and a variety of functionalized alkyne reaction partners. Overall, isoindoline, phthalan, and indan libraries were assembled in good to excellent yields and with high purities.     

Enantioselective formal synthesis of (+)-precapnelladiene by chiral copper-catalyzed asymmetric [2+2]-cycloaddition reaction

Enantioselective short formal synthesis of (+)-precapnelladiene (1) was achieved from a bicyclo[3.2.0]heptane derivative, which was prepared enantioselectively by chiral copper-catalyzed [2+2]-cycloaddition reaction of 2-methoxycarbonyl-2-cyclopenten-1-one with phenylthioacetylene developed by us.