一种用于滑坡监测的复合光纤装置

针对滑坡体深部位移这一重要指标,基于光时域反射技术,设计了一种蝴蝶结形式的复合光纤装置用于监测深部剪切位移.该传感装置由方形聚氯乙烯树脂管、毛细钢管、光纤、砂浆组合而成.首先在40mm×40mm×500mm(厚2.0mm)的聚氯乙烯树脂方管四周开挖导槽,将Φ1×500mm毛细钢管放置在导槽中.然后用光纤穿入毛细钢管,光纤一端固定,另一端绕制成蝴蝶结形式.最后在聚氯乙烯树脂管外围浇筑Φ110mm的砂浆,制作成圆柱式复合光纤装置.室内边坡模型剪切测试台测试结果表明:该装置对深部剪切位移初测准确度为1mm,最大测量范围为40mm.分析表明该复合光纤装置具有灵敏度高、测量范围大、结构简单易于安装等优点,可以用于滑坡以及野外岩土结构工程等进行现场原位监测.     

免受温度影响的光纤光栅位移传感器

将一定长度、均匀周期的光纤光栅沿轴向刚性粘贴于厚度呈阶跃分布的等腰三角状悬臂梁界线附近的表面上 ,通过观测该光栅反射谱中两个峰值的间距来监测梁自由端在垂直于表面方向上的位移。实验表明该无源温漂位移线性传感装置的传感灵敏度达 9.2 4× 10 -2 nm/ mm,与理论值 9.4× 10 -2 nm/ mm非常接近。     

基于悬臂梁结构的光纤光栅位移传感研究

本文提出了一种基于光纤光栅和悬臂梁结构的新型位移传感方案,并给出了实验结果。本传感系统结构简单,测量范围大(大于20mm),线性好(0.9991),抗电磁干扰,信噪比高,并可实现在线监测。     

岩层变形检测的光纤光栅多点传感理论与工程应用

为了监测松散地层沉降变形,提出了一种用于钻孔中植入式光纤Bragg光栅传感器(FBG)的结构和传感网络系统.基于室内实验结果,给出了用于岩层变形检测的传感光栅波长带宽为6 nm,分析了多点传感信号分辨因子,山光源带宽决定的测试系统最大实际复用能力为6个传感器.设计并实现了一个由18个光纤光栅组成的具有特色的光纤Bragg光栅波分复用/空分复用混合阵列.工程实践表明,光纤光栅传感系统采用双同路布置.可提高系统下放后光纤光栅传感器的成活率.     

基于弯曲伸张结构的光纤光栅传感研究

以民用工程结构如桥梁、大坝、高层建筑的健康检测为背景, 采用光纤光栅传感器实现对结构性能的实时监测和诊断, 及时发现结构的损伤以评估结构的安全性. 提出了一种可用于光纤光栅传感的新型弯曲伸张弹性敏感结构, 可实现对压力、应变以及加速度的准确测量. 对该结构弯梁腹部处的应变进行了理论分析和实验验证, 结果表明弯梁腹部处各点的应变与该弯曲伸张结构在竖直方向上所受压力、应变以及加速度大小成线性关系. 其最大的优点是同样灵敏度下体积小, 在井下等横向尺寸受限、又要测量纵向加速度的情况下, 梁式传感结构很可能无法使用, 该新型弯曲伸张型弹性敏感结构可作为弹性元件用于光纤光栅压力、应变、称重以及加速度传感器的设计.     

新型光纤布拉格光栅温度自动补偿传感研究

将光纤布拉格光栅斜向粘贴于厚度相等的等腰三角形悬臂梁的侧面，利用光纤光栅啁啾效应，通过测量带宽进行多种力学量的传感研究。理论和实验均证明，该传感装置具有温度自动补偿功能。在位移、应力等参量的传感实验中获得了很好的线性响应，位移和应力传感的灵敏度分别为2.47nm/mm和2.26nm/N，光纤光栅实验带宽达15.5nm。     

具有温度补偿的光纤位移传感器

位移测量是结构健康检测的重要参量之一.本文提出了一种双悬臂梁粘贴光纤光栅的位移传感器,它将位移变化转换成两只光纤光栅的波长移动,实现对位移量的绝对测量.通过引入对称补偿光纤光栅的方法解决了温度与位移交叉敏感的问题.推导了位移传感器的工作原理,完成了相关实验,并分析了传感器所产生误差的来源.实验结果表明,在量程为20 mm的时候,位移灵敏度为123 pm/mm,温度补偿前,温度对位移的影响是234.9 μm/℃;温度补偿后,温度对位移的影响为17 μm/℃.本位移传感器量程大、线性好、准确度高,不易受恶劣环境影响.     

基于光纤光栅传感的管道滑坡监测方法研究

针对铺设在滑坡体内的管道,提出了基于光纤光栅传感的管道滑坡监测方法。阐述了已知管道上三点应力求最大应力的方法。采用温度自补偿式光纤光栅应变传感器监测管体应力,对传感器测量的5.12汶川地震后管体应力数据进行分析。结果表明:地震对滑坡有显著影响,发生了浅层滑动面的较大位移;管体的应力都有显著增长,但总应力水平还低于预警阈值,尚处于安全状态。     

基于光纤光栅的高灵敏度流速传感器

利用光纤光栅压强传感机构和汾丘里管设计了一种基于光纤光栅的流速传感器,并推导了光纤光栅中心波长漂移量与流速的关系式。实验表明,该传感器具有较高的灵敏度,稳定性较好,光纤光栅的中心波长随流速的增加而不断向短波方向漂移,而带宽几乎没有变化,实验和理论符合得较好。该流速传感器的动态感测范围为51.0~148.2 mm/s,在该范围内,至少可感测到0.3 mm/s的流速变化,这是目前所报道的最优值。优化光纤光栅压强传感机构及汾丘里管的参量,可测量其它速度段的流速,并可进一步提高传感灵敏度。     

复合金属光栅模式分离与高性能气体传感器应用

为实现近红外波段表面等离子体共振(SPR)模式的分裂和移动, 同时提高光栅基SPR传感器的品质因数, 提出了一种由双金属光栅构成的新型复合结构光栅, 并研究了其气体传感特性. 运用有限时域差分算法对该结构进行了数值模拟, 发现由复合金属光栅激发的SPR出现模式分裂的现象. 通过增大双金属光栅阵列间的相对位移改变原结构的对称性, 导致复合金属光栅分裂的SPR模式朝相反方向移动. 当相对位移量进一步增大到双光栅合并成新的单一光栅时, 随光栅结构对称性的恢复, 分裂的两共振模式最后又重新合并为一个模式. 如果待测物的折射率为1.01≤n_a≤1.05, 当相对位移量为0时, 基于复合光栅结构气体传感器的折射率灵敏度为1207.5 nm/RIU, 且品质因数达到1290.7; 当相对位移量为100 nm时, 与双共振模式对应的折射率灵敏度分别为1205.0 nm/RIU和1210.0 nm/RIU, 品质因数分别为1295.4和762.3. 因此, 复合光栅SPR传感器具有超高品质因数的性能, 使得它在生物化学传感领域中有巨大的应用潜力.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.