苯官能化MCM-41的合成、表征、磺酰化及与二胺的反应

以三乙氧基硅基苯((C₂H₅O)₃Si-Ph，（(triethoxysilyl)benzene，TESB)以及正硅酸乙酯（TEOS）的混合液为硅源，以溴代十六烷基吡啶(CPBr)为模板剂，在HCl介质中合成了苯官能化的有机-无机杂化介孔分子筛MCM-41。对合成的分子筛用FT-IR、PXRD、TEM、N₂吸附-脱附等手段进行了表征。结果表明，合成的苯官能化的有机-无机杂化介孔分子筛具有良好的介孔孔道结构。用三甲基氯硅烷对分子筛表面的Si-OH进行了封端处理，用氯磺酸对合成的苯官能化的有机-无机杂化介孔分子筛进行了磺酰化，并与各种二胺进行了反应。     

Organorhodium‐Functionalized Periodic Mesoporous Organosilica: High Hydrophobicity Promotes Asymmetric Transfer Hydrogenation in Aqueous Medium

Three organosilica‐bridged periodic mesoporous organosilicas were prepared by the immobilization of a chiral N‐sulfonylated diamine‐based organorhodium complex within their silicate network. Structural analysis and characterization confirmed their well‐defined single‐site active rhodium centers, whilst electron microscopy revealed their highly ordered hexagonal mesostructures. Among these three different organosilica‐bridged periodic mesoporous organosilicas, the ethylene‐bridged periodic mesoporous organosilica catalyst exhibited excellent heterogeneous catalytic activity and high enantioselectivity in the aqueous asymmetric transfer hydrogenation of aromatic ketones. This superior catalytic performance was attributed to its salient hydrophobicity, whilst its comparable enantioselectivity relative to the homogeneous catalyst was derived from the confined nature of the chiral organorhodium catalytic sites. Furthermore, this ethylene‐bridged periodic mesoporous organosilica could be conveniently recovered and reused at least 12 times without the loss of its catalytic activity. This feature makes this catalyst attractive for practical organic synthesis in an environmentally friendly manner. This study offers a general way of optimizing the bridged organosilica moiety in periodic mesoporous organosilicas, thereby enhancing its catalytic activity in heterogeneous catalysis.     

A General Method for Preparing Bridged Organosilanes with Pendant Functional Groups and Functional Mesoporous Organosilicas

New organosilica precursors containing two triethoxysilyl groups suitable for the organosilica material formation through the sol‐gel process were designed and synthesised. These precursors display alkyne or azide groups for attaching targeted functional groups by copper‐catalysed azide–alkyne cycloaddition (CuAAC) and can be used for the preparation of functional organosilicas following two strategies: 1) the functional group is first appended by CuAAC under anhydrous conditions, then the functional material is prepared by the sol‐gel process; 2) the precursor is first subjected to the sol‐gel process, producing porous, clickable bridged silsesquioxanes or periodic mesoporous organosilicas (PMOs), then the desired functional groups are attached by means of CuAAC. Herein, we show the feasibility of both approaches. A series of bridged bis(triethoxysilane)s with different pending organic moieties was prepared, demonstrating the compatibility of the first approach with many functional groups. In particular, we demonstrate that organic functional molecules bearing only one derivatisation site can be used to produce bridged organosilanes and bridged silsesquioxanes. In the second approach, clickable PMOs and porous bridged silsesquioxanes were prepared from the alkyne‐ or azide‐containing precursors, and thereafter, functionalised with complementary model azide‐ or alkyne‐containing molecules. These results confirmed the potential of this approach as a general methodology for preparing functional organosilicas with high loadings of functional groups. Both approaches give rise to a wide range of new functional organosilica materials.     

A general strategy for the rational design of size-selective mesoporous catalysts

A series of functionalized mesoporous silicas with cagelike pore topology has been synthesized and screened for size-selective catalytic transformations. The aluminum-catalyzed Meerwein-Ponndorf-Verley (MPV) reduction of differently sized aromatic aldehydes (benzaldehyde and 1-pyrenecarbox-aldehyde) has been investigated as a test reaction. The catalysts were synthesized in a two-step grafting sequence comprising pore-size engineering of mesoporous silicas (SBA-1, SBA-2, SBA-16) with long-chain alkyl dimethylaminosilanes and surface organoaluminum chemistry with triethylaluminum [{Al(CH(2)CH(3))3}2]. Size-selective reaction behavior was found for small pore SBA-1 materials, and the selectivity could be efficiently tuned by selecting a silylating reagent of appropriate size. The results are compared with the catalytic performance of a large-pore periodic mesoporous organosilica PMO[SBA-1] and the nonporous high-surface-area silicas Aerosil 300/380.     

Synthesis and characterization of chiral benzylic ether-bridged periodic mesoporous organosilicas

The first synthesis of a chiral periodic mesoporous organosilica (PMO) carrying benzylic ether bridging groups is reported. By hydrolysis and condensation of the new designed chiral organosilica precursor 1,4-bis(triethoxysilyl)-2-(1-methoxyethyl)benzene (BTEMEB) in the presence of the non-ionic oligomeric surfactant Brij 76 as supramolecular structure-directing agent under acidic conditions, an ordered mesoporous chiral benzylic ether-bridged hybrid material with a high specific surface area was obtained. The chiral PMO precursor was synthesized in a four-step reaction from 1,4-dibromobenzene as the starting compound. The evidence for the presence of the chiral units in the organosilica precursor as well as inside the PMO material is provided by optical activity measurements.     

Periodic Mesoporous Organosilica Materials: Self‐Assembly of Carbamothioic Acid‐Bridged Organosilane Precursors

A new series of carbamothioic acid‐containing periodic mesoporous organosilica (PMO) materials has been synthesized by a direct cocondensation method, in which an organosilica precursor N,S‐bis[3‐(triethoxysilyl)propyl]carbamothioic acid (MI) is treated with tetraethyl orthosilicate (TEOS), and the nonionic surfactant Pluronic 123 (P123) is used as a template under acidic conditions in the presence of inorganic additives. Moreover, the synthesis of the PMO material consisting of the MI precursor without TEOS has been realized. These novel PMO materials have large surface areas, well‐ordered mesoporous structures, hollow fiberlike morphologies, and thick walls. They are also structurally well‐ordered with a high organosilica precursor content, and the carbamothioic acid groups are thermally stable up to 250 °C. Furthermore, the organosilica materials exhibit hydrothermal stability in basic solution.     

硅酸钠与有机硅氧烷前驱体自组装杂化硅基中孔材料

采用有机硅氧烷(RTES)与硅酸钠(Na2SiO3)共水解缩聚合成有机官能化的MSU型硅基中孔材料.考察了合成体系pH值对材料织构性能的影响以及不同有机硅氧烷与硅酸钠在中性条件下的自组装行为.发现在中性条件下，加入NaF可以有效避免带有较小有机基团的有机硅氧烷进入材料孔壁的可能性，而且合成体系的pH值对材料的孔径有一定的调控作用.     

Preparation and characterization of periodic mesoporous organosilica terminally functionalized with fluorocarbon groups by a direct synthesis

Fluorocarbon groups were used to modify the pore channels of ethane-bridged periodic mesoporous organosilica by the co-condensation of 1,2-Bis(triethoxysilyl)ethane (BTESE) and trifluoropropyltrimethoxysilane (TFPTMS) in the presence of Poly(ethylene glycol)-B-Poly(propylene glycol)-B-Poly(ethylene glycol) (P123) surfactants under acidic conditions. The functionalized materials were investigated in detail by means of XRD, TEM, FT-IR, solid-state NMR, and N₂ adsorption. The effect of fluorocarbon groups concentration on the mesoscopic order and pore structure of the functionalized materials was also studied. The results show that bridging groups in the framework do not cleave and fluorocarbon groups are attached covalently to the pore wall of periodic mesoporous organosilica after functionalization. The samples functionalized with 20% TFPTMS remain desired mesoporous architecture, with a narrow pore size distribution centered at 4.1 nm, a large surface of 834 m²/g and a pore volume of 0.91 cm³g⁻¹, without pronounced change compared to the pure periodic mesoporous organosilica. Unfortunately the functionalized materials become structurally disordered with increasing amount of fluorocarbon groups.     

共聚法和嫁接法制备二茂铁杂化介孔材料及其催化性能

 以桥联硅氧烷 1,1'-双[(2-三乙氧基硅基) 乙基]二茂铁 (BTEF) 和正硅酸乙酯为前驱体, 以十六烷基三甲基溴化铵为结构导向剂, 采用共聚法制备了二茂铁功能化的周期介孔有机硅烷材料 (PMO-Fc). 同时以 BTEF 为修饰剂, 以甲苯为分散剂, 采用嫁接法制备了 Fc-MCM-41 杂化介孔材料. 采用 N2 物理吸附、X 射线衍射、透射电镜和红外光谱等手段对材料进行了表征, 评价了其催化苯羟化反应活性. 结果表明, PMO-Fc 具有有序的二维六方形孔道结构, 较大的比表面积和孔体积, 在苯羟化反应中表现出比 Fc-MCM-41 更高的催化活性, 苯酚的选择性和收率分别为 65.3% 和 20.2%.     

Fluorescence Emission from 2,6‐Naphthylene‐Bridged Mesoporous Organosilicas with an Amorphous or Crystal‐Like Framework

We report that 2,6‐naphthylene‐bridged periodic mesoporous organosilicas exhibit unique fluorescence behavior that reflects molecular‐scale periodicities in the framework. Periodic mesoporous organosilicas consisting of naphthalene–silica hybrid frameworks were synthesized by hydrolysis and condensation of a naphthalene‐derived organosilane precursor in the presence of a template surfactant. The morphologies and meso‐ and molecular‐scale periodicities of the organosilica materials strongly depend on the synthetic conditions. The naphthalene moieties embedded within the molecularly ordered framework exhibited a monomer‐band emission, whereas those embedded within the amorphous framework showed a broad emission attributed to an excimer band. These results suggest that the naphthalene moieties fixed within the crystal‐like framework are isolated in spite of their densely packed structure, different from conventional organosilica frameworks in which only excimer emission was observed for both the crystal‐like and amorphous frameworks at room temperature. This key finding suggests a potential to control interactions between organic groups and thus the optical properties of inorganic/organic hybrids.     

Organic-inorganic hybrid mesoporous silicas: functionalization, pore size, and morphology control

Topological design of mesoporous silica materials, pore architecture, pore size, and morphology are currently major issues in areas such as catalytic conversion of bulky molecules, adsorption, host-guest chemistry, etc. In this sense, we discuss the pore size-controlled mesostructure, framework functionalization, and morphology control of organic-inorganic hybrid mesoporous silicas by which we can improve the applicability of mesoporous materials. First, we explain that the sizes of hexagonal- and cubic-type pores in organic-inorganic hybrid mesoporous silicas are well controlled from 24.3 to 98.0 A by the direct micelle-control method using an organosilica precursor and surfactants with different alkyl chain lengths or triblock copolymers as templates and swelling agents incorporated in the formed micelles. Second, we describe that organic-inorganic hybrid mesoporous materials with various functional groups form various external morphologies such as rod, cauliflower, film, rope, spheroid, monolith, and fiber shapes. Third, we discuss that transition metals (Ti and Ru) and rare-earth ions (Eu(3+) and Tb(3+)) are used to modify organic-inorganic hybrid mesoporous silica materials. Such hybrid mesoporous silica materials are expected to be applied as excellent catalysts for organic reactions, photocatalysis, optical devices, etc.     

Light‐Harvesting Three‐Chromophore Systems Based on Biphenyl‐Bridged Periodic Mesoporous Organosilica

Three‐chromophore systems with light‐harvesting behavior were prepared, which are based on periodic mesoporous organosilica (PMO) with crystal‐like ordered structure. The organic bridges of biphenyl‐PMO in the pore walls act as donors and two types of dye are incorporated in the one‐dimensional channels. Consecutive two‐step‐Förster resonance energy transfer is observed from the biphenyl moieties to mediators (diethyl‐aminocoumarin or aminoacridone), followed by energy transfer from mediators to acceptors (dibenzothiacarbocyanine, indodicarbocyanine, sulforhodamine G). High energy‐transfer efficiencies ranging from 70 to 80 % are obtained for two‐step‐FRET, indicating that the mesochannel structure with one‐dimensional ordering provides spatial arrangement of chromophore pairs for an efficient direct energy transfer. The emission wavelength can be tuned by a choice of acceptor dye: 477 nm (diethylaminocoumarin), 519 nm (aminoacridone), 567 nm (sulforhodamine G), 630 nm (dibenzothiacarbocyanine), and 692 nm (indodicarbocyanine).     

Manganese‐Containing Periodic Mesoporous Organosilica with Ionic‐Liquid Framework (Mn@PMO‐IL): A Powerful,Durable, and Reusable Nanocatalyst for the Biginelli Reaction

The catalytic application of a novel manganese‐containing periodic mesoporous organosilica with ionic‐liquid framework (Mn@PMO‐IL) in the Biginelli reaction was investigated. First, the Mn@PMO‐IL nanocatalyst was prepared and characterized by TEM, SEM, X‐ray photoelectron spectroscopy, and nitrogen‐sorption analysis. The catalyst was then used in the one‐pot Biginelli condensation of various aldehydes with urea and alkyl acetoacetates under solvent‐free conditions. The corresponding dihydropyrimidone products were obtained in high to excellent yields and selectivities at short reaction times. Moreover, the catalyst was recovered and successfully reused many times with no notable decrease in activity and selectivity.     

Periodic Mesoporous Organosilica with Molecular‐Scale Ordering Self‐Assembled by Hydrogen Bonds

Nanoporous materials with functional frameworks have attracted attention because of their potential for various applications. Silica‐based mesoporous materials generally consist of amorphous frameworks, whereas a molecular‐scale lamellar ordering within the pore wall has been found for periodic mesoporous organosilicas (PMOs) prepared from bridged organosilane precursors. Formation of a “crystal‐like” framework has been expected to significantly change the physical and chemical properties of PMOs. However, until now, there has been no report on other crystal‐like arrangements. Here, we report a new molecular‐scale ordering induced for a PMO. Our strategy is to form pore walls from precursors exhibiting directional H‐bonding interaction. We demonstrate that the H‐bonded organosilica columns are hexagonally packed within the pore walls. We also show that the H‐bonded pore walls can stably accommodate H‐bonding guest molecules, which represents a new method of modifying the PMO framework.     

Charge Separation in a Multifunctionalized Framework of Hydrogen‐Bonded Periodic Mesoporous Organosilica

Integration of functional molecular parts into nanoporous materials in a state that allows intermolecular charge or energy transfer is one of the key approaches to the development of photofunctional and electroactive materials. Herein, we report charge separation in a functionalized framework of a periodic mesoporous organosilica (PMO) self‐assembled by hydrogen bonds. Electroactive π‐conjugated organic species with different electron‐donating and electron‐accepting properties were selectively fixed onto the external surface of a nanoparticulate PMO, within the pore wall, and onto the surface of the internal mesopore. UV irradiation of the modified PMO resulted in photoinduced electron transfer and charge separation from the external surface to the pore wall and from the pore wall to the surface of the internal mesopores. These results suggest the high potential of multifunctionalized PMOs in the construction of photocatalytic reaction fields.     

An alternate route for the synthesis of hybrid mesoporous organosilica with crystal-like pore walls from allylorganosilane precursors

The bridged allylorganosilanes 1,4-bis(diallylethoxysilyl)benzene and 1,4-bis(triallylsilyl)benzene are presented as new precursors for the surfactant-assisted synthesis of ordered mesoporous organosilica with pore walls having crystal-like molecular-scale periodicity. This approach provides a new route to the formation of periodic mesostructures with crystal-like pore walls. The synthesis method presented is applicable to the preparation of mesoporous organosilica with bulky organic groups, the precursors of which are typically impossible to obtain in high purity.     

Post-treatment and characterization of novel luminescent hybrid bimodal mesoporous silicas

A novel luminescent hybrid bimodal mesoporous silicas (LHBMS) were synthesized via grafting 1,8-Naphthalic anhydride into the pore channels of bimodal mesoporous silicas (BMMs) for the first time. The resulting samples were characterized by powder X-ray diffraction (XRD), N₂ adsorption/desorption measurement, Fourier transform infrared spectroscopy (FT-IR), Transmission electron microscopy (TEM), UV-vis absorption spectroscopy, and Photoluminescence spectroscopy (PL). The results show that 1,8-Naphthalic anhydride organic groups have been successfully introduced into the mesopores of the BMMs and the hybrid silicas are of bimodal mesoporous structure with the ordered small mesopores of around 3 nm and the large mesopores of uniform intra-nanoparticle. The excellent photoluminescent performance of LHBMS has a blue shift compared to that of 2-[3-(triethoxysilyl) propyl-1 H-Benz [de]isoquinoline-1, 3(2 H)-dione, suggesting the existence of the quantum confinement effectiveness.     

A Zinc Phthalocyanine Based Periodic Mesoporous Organosilica Exhibiting Charge Transfer to Fullerenes

Periodic mesoporous organosilica (PMO) materials offer a strategy to position molecular semiconductors within a highly defined, porous network. We developed thin films of a new semiconducting zinc phthalocyanine‐bridged PMO exhibiting a face‐centered orthorhombic pore structure with an average pore diameter of 11 nm. The exceptional degree of order achieved with this PMO enabled us to create thin films consisting of a single porous domain throughout their entire thickness, thus providing maximal accessibility for subsequent incorporation of a complementary phase. The phthalocyanine building blocks inside the pore walls were found to be well‐aggregated, enabling electronic conductivity and extending the light‐harvesting capabilities to the near IR region. Ordered 3D heterojunctions capable of promoting photo‐induced charge transfer were constructed by impregnation of the PMO with a fullerene derivative. When integrated into a photovoltaic device, the infiltrated PMO is capable of producing a high open‐circuit voltage and a considerable photocurrent, which represents a significant step towards potential applications of PMOs in optoelectronics.     

Mesoporous Silica and Organosilica Films Templated by Nanocrystalline Chitin

Liquid crystalline phases can be used to impart order into inorganic solids, creating materials that mimic natural architectures. Herein, mesoporous silica and organosilica films with layered structures and high surface areas have been templated by nanocrystalline chitin. Aqueous suspensions of spindle‐shaped chitin nanocrystals were prepared by sequential deacetylation and hydrolysis of chitin fibrils isolated from king crab shells. The nanocrystalline chitin self‐assembles into a nematic liquid‐crystalline phase that has been used to template silica and organosilica composites. Removal of the chitin template by either calcination or sulfuric‐acid‐catalyzed hydrolysis gave mesoporous silica and ethylene‐bridged organosilica films. The large, crack‐free mesoporous films have layered structures with features that originate from the nematic organization of the nanocrystalline chitin.     

Periodic Mesoporous Organosilicas as Efficient Nanoreactors in Cascade Reactions Preparing Cyclopropanic Derivatives

In this work, three organosilica precursors functionalized with carbamate moieties were synthesized by condensing of 3‐isocyanatopropyltriethoxysilane and coupling regents of either hydroquinone (HQ), bisphenol A (BPA), or 1,1′‐bi‐2‐naphthol (BN). These organosilica precursors were covalently bonded in the framework of periodic mesoporous organosilicas by co‐condensation and hydrolysis with tetraethyl orthosilicate (TEOS) under hydrothermal treatment. The compositions and physical properties were characterized with FTIR, XRD, thermogravimetric/differential thermal analysis (TG/DTA), ²⁹Si NMR, ¹³C NMR spectroscopies, SEM, TEM, and BET technologies. These characterizations suggest that three different structures were formed as the result of different sizes and compositions of the organosilica precursors. The three mesoporous organosilicas were applied as heterogeneous catalysts in the one‐pot cascade Knoevenagel and Michael cyclopropanic reactions for the synthesis of cyclopropanic derivatives and showed excellent activity and selectivity. The highest conversion was obtained with mesoporous catalyst (MC)‐HQ owing to its ordered mesostructure, highest surface area, and weakest stereo effect of the organic linking groups compared with MC‐BAP and MC‐BN. This methodology employed cheaper and more easily obtainable raw materials as reagents over the traditional alkene additive system and these heterogeneous catalysts exhibit superior performance and recyclability than typical homogeneous organic catalysts.