Mono-, di-, and tricoordinated phosphorus attached to a N-N unit: an experimental and theoretical study

N,N',N'-[Tris(trimethylsilyl)]hydrazino-diphenylphosphane, (TMS)2 N-(TMS)N-PPh2 (1), and N,N',N'-[tris(trimethylsilyl)]hydrazino-phenyl(chloro)phosphane, (TMS)2 N-(TMS)N-P(Cl)Ph2 (2), were obtained in the reaction of bis-[lithium-tris(trimethylsilyl)hydrazide] with Ph(n)PCl(3 - n) (n = 1, 2). The structure and bonding of both species are discussed on the basis of experimentally observed (X-ray, Raman, NMR, and MS) and theoretically obtained data (B3LYP/6-31G(d,p), NBO analysis). Oxidation with sulfur and selenium results in the formation of (TMS)2 N-(TMS)N-P(S)Ph2 (4), (TMS)2 N-(TMS)N-P(Se)Ph2 (5), (TMS)2 N-(TMS)N-P(S)Ph(Cl) (6), and (TMS)2 N-(TMS)N-P(Se)Ph(Cl) (7). Moreover, the thermal decomposition of N,N',N'-[tris(trimethylsilyl)]hydrazine-dichlorophosphane, (TMS)2 N-(TMS)N-PCl2 (3) and the reaction with magnesium have been investigated. The formation and molecular structure of the novel MgCl2(THF)2 x 2Mg[(TMS)NP(O)2 N(TMS)2](THF) (8) salt containing the hitherto unknown (TMS)NP(O)2 N(TMS)2(2-) anion are discussed. DFT calculations (B3LYP/6-311+G(3df,2p)//B3LYP/6-31G(d,p)) are used to evaluate the bonding, ground-state structures, and energy landscape for the different isomers of 3: the thermodynamics and kinetics of the successive elimination of chlorotrimethylsilane (TMS-Cl) resulting in the formation of covalent azide analogues such as TMS-PNN or TMS-NNP.     

Lithium hexamethyldisilazide/triethylamine-mediated ketone enolization: remarkable rate accelerations stemming from a dimer-based mechanism

Mechanistic studies of the enolization of 2-methylcyclohexanone mediated by lithium hexamethyldisilazide (LiHMDS; TMS2NLi) in toluene and toluene/triethylamine (Et3N) mixtures are described. Structural studies of LiHMDS/ketone mixtures in toluene reveal cyclic dimer (TMS2NLi)2(ketone). Rate studies using in situ IR spectroscopy show the enolization proceeds via a dimer-based transition structure, [(TMS2NLi)2(ketone)]. NMR spectroscopic studies of LiHMDS/ketone mixtures in the presence of relatively unhindered trialkylamines such as Me2NEt reveal the quantitative formation of cyclic dimers of general structure (TMS2NLi)2(Et3N)(ketone). Rate studies trace a >3000-fold rate acceleration to a dimer-based transition structure, [(TMS2NLi)2(Et3N)(ketone)].     

Ketone enolization by lithium hexamethyldisilazide: structural and rate studies of the accelerating effects of trialkylamines

Mechanistic studies of the enolization of 2-methylcyclohexanone mediated by lithium hexamethyldisilazide (LiHMDS; TMS2NLi) in toluene and toluene/amine mixtures are described. NMR spectroscopic studies of LiHMDS/ketone mixtures in toluene reveal the ketone-complexed cyclic dimer (TMS2NLi)2(ketone). Rate studies using in situ IR spectroscopy show the enolization proceeds via a dimer-based transition structure, [(TMS2NLi)2(ketone)]++. NMR spectroscopic studies of LiHMDS/ketone mixtures in the presence of relatively unhindered trialkylamines such as Me2NEt reveal the quantitative formation of cyclic dimers of general structure (TMS2NLi)2(R3N)(ketone). Rate studies trace a >200-fold rate acceleration to a dimer-based transition structure, [(TMS2NLi)2(R3N)(ketone)]++. Amines of intermediate steric demand, such as Et3N, are characterized by recalcitrant solvation, saturation kinetics, and exceptional (>3000-fold) accelerations traced to the aforementioned dimer-based pathway. Amines of high steric demand, such as i-Pr2NEt, do not observably solvate (TMS2NLi)2(ketone) but mediate enolization via [(TMS2NLi)2(R3N)(ketone)]++ with muted accelerations. The most highly hindered amines, such as i-Bu3N, do not influence the LiHMDS structure or the enolization rate. Overall, surprisingly complex dependencies of the enolization rates on the structures and concentrations of the amines derive from unexpectedly simple steric effects. The consequences of aggregation, mixed aggregation, and substrate-base precomplexation are discussed.     

Unique formation of a pentanuclear lanthanum(III) thiolate oxide cluster via control of hydrolysis

The reaction of [(TMS)2N]3La(mu-Cl)Li(THF)3 (1) and HSPh produced a bimetallic complex [{(TMS)2N}2La(THF)]2(mu-SPh)(mu-Cl)] (2). Compound [{(TMS)2N}2La5O(SPh)10LiCl2(THF)6] (3) was prepared by control of the hydrolysis of 2 and LiCl or 1 and HSPh with the proper amount of water. 1 was treated first with 1/6 equiv of H2O and then with equimolar HSPh; a polymeric complex [{(TMS)2N}2(mu-SPh)La(mu-SPh)Li(THF)2](infinity) (4) was isolated. 3 contains a central [(mu-SPh)4(mu3-SPh)2{La(THF)}4(mu3-O)]4+ tetrahedral fragment in which two La atoms are linked by a pair of mu-SPh- and mu3-Cl- ligands to a [{(TMS)2N}2La]+ fragment, while the other two are bridged by two mu-SPh- ligands to a [Li(THF)2]+ fragment, forming a bee-shaped structure.     

Preparation of nano-sized Pt metal particles by photo-assisted deposition (PAD) on transparent Ti-containing mesoporous silica thin film

We have investigated a novel technique for the preparation of nano-sized Pt metals on Ti-containing mesoporous silica (TMS) thin film by photo-assisted deposition (PAD). The transparent TMS thin film was prepared on a quartz plate through sol—gel/spin coating. XRD, UV-Vis and Ti K-edge XAFS measurements revealed the formation of isolated Ti oxide species with a tetrahedral-coordination geometry in the silica framework. Deposition of Pt metal precursor on TMS thin film under UV-light irradiation, followed by reduction with molecular hydrogen, afforded a transparent thin film (Pt/TMS). The formation of highly dispersed nano-sized Pt metals having narrow size distributions was determined by Pd L_III-edge XANES and TEM analysis. The TMS and Pt/TMS thin films have been demonstrated to exhibit a strong hydrophilic property, even before UV irradiation, compared to the common mesoporous silica and TiO₂ thin films. After UV-light irradiation, the contact angle of water droplet on the TMS and Pt/TMS thin films became extremely lower, indicating the appearance of the photo-induced super-hydrophilic property.     

Organolanthanide-catalyzed intramolecular hydroamination/cyclization of amines tethered to 1,2-disubstituted alkenes

[reaction: see text] This contribution reports the organolanthanide-catalyzed intramolecular hydroamination/cyclization of amines tethered to 1,2-disubstituted alkenes to afford the corresponding mono- and disubstituted pyrrolidines and piperidines by using coordinatively unsaturated complexes of the type (eta(5)-Me(5)C(5))(2)LnCH(TMS)(2) (Ln = La, Sm), [Me(2)Si(eta(5)-Me(4)C(5))(2)]NdCH(TMS)(2), [Et(2)Si(eta(5)-Me(4)C(5))(eta(5)-C(5)H(4))]NdCH(TMS)(2), and [Me(2)Si(eta(5)-Me(4)C(5))((t)()BuN)]LnE(TMS)(2) (Ln = Sm, Y, Yb, Lu; E = N, CH) as precatalysts. [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) mediates intramolecular hydroamination/cyclization of sterically demanding amino-olefins to afford disubstituted pyrrolidines in high diastereoselectivity (trans/cis = 16/1) and in good to excellent yield.     

Controlled syntheses, characterization, and reactivity of neutral and anionic lanthanide amides supported by methylene-linked bis(phenolate) ligands

A series of neutral and anionic bis(phenolate) lanthanide amides were synthesized by general metathesis reactions, and their reactivity was explored. Protolytic ligand exchange reactions of MBMPH2 (MBMP = 2,2'-methylene bis(6-tert-butyl-4-methyl-phenolate)) with [Ln{N(TMS)2}2(mu-Cl)(THF)]2 (TMS = SiMe3) afforded the desired bridged bis(phenolate) lanthanide chlorides [(MBMP)Ln(mu-Cl)(THF)2]2 [Ln = Nd (1), Yb (2)] in high isolated yields. These lanthanide chlorides were found to be useful precursors for the synthesis of the corresponding lanthanide derivatives. Reactions of 1 and 2 with 2 equiv of NaN(TMS)2 in THF produced the expected neutral bis(phenolate) lanthanide amido complexes (MBMP)Ln[N(TMS)2](THF)2 [Ln = Nd (3), Yb (4)] in high yields. Whereas the reactions of 1 and 2 with LiN(TMS)2 in a 1:4 molar ratio gave the anionic bis(phenolate) lanthanide amides as discrete ion-pair complexes [Li(THF)4][(MBMP)Ln{N(TMS)2}2] [Ln = Nd (5), Yb (6)] in high isolated yields. Further study revealed that 5 and 6 can also be conveniently synthesized in high yields by the direct reactions of MBMPH2 with [Ln{N(TMS)2}2(mu-Cl)(THF)]2 in a 2:1 molar ratio, and then with 4 equiv of nBuLi. The reactivity of the neutral and anionic bis(phenolate) lanthanide amides was comparatively investigated. It was found that the insertion reactions of carbodiimide into the Ln-N bond of neutral lanthanide amido complexes 3 and 4 gave the anticipated bis(phenolate) lanthanide guanidinate complexes [(mu-O-MBMP)Nd{(iPrN)2CN(TMS)2}]2 (7) and (MBMP)Yb[(iPrN)2CN(TMS)2] (8), respectively, in high yields, whereas the similar reaction of carbodiimide with anionic amido complex 5 provided the unexpected ligand-redistributed products, and the homoleptic ion-pair bis(phenolate) neodymium complex [Li(DME)2(THF)][(MBMP)2Nd(THF)2] (9) was finally isolated as one of the products. Furthermore, the anionic bis(phenolate) lanthanide amides showed higher catalytic activity for the polymerization of epsilon-caprolactone than the neutral ones. All of the complexes were characterized with elemental analysis and IR spectra, and the definitive molecular structures of 1-3 and 5-9 were provided by single-crystal X-ray analyses.     

Liquid crystalline mesophases of pluronics (L64, P65, and P123) and transition metal nitrate salts ([M(H2O)6](NO3)2)

The triblock poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) copolymers, Pluronics (L64, P65, and P123), form liquid crystalline (LC) mesophases with transition metal nitrate salts (TMS), [M(H(2)O)(n)](NO(3))(2), in the presence and absence of free water in the media. In this assembly process, M-OH(2) plays an important role as observed in a TMS:C(n)EO(m) (C(n)EO(m) is oligo(ethylene oxide) nonionic surfactants) system. The structure of the LC mesophases and interactions of the metal ion-nitrate ion and metal ion-Pluronic were investigated using microscopy (POM), diffraction (XRD), and spectroscopy (FTIR and micro-Raman) techniques. The TMS:L64 system requires a shear force for mesophase ordering to be observed using X-ray diffraction. However, TMS:P65 and TMS:P123 form well structured LC mesophases. Depending on the salt/Pluronic mole ratio, hexagonal LC mesophases are observed in the TMS:P65 systems and cubic and tetragonal LC mesophases in the TMS:P123 systems. The LC mesophase in the water/salt/Pluronic system is sensitive to the concentration of free (H(2)O) and coordinated water (M-OH(2)) molecules and demonstrates structural changes. As the free water is evaporated from the H(2)O:TMS:Pluronic LC mesophase (ternary mixture), the nitrate ion remains free in the media. However, complete evaporation of the free water molecules enforces the coordination of the nitrate ion to the metal ion in all TMS:Pluronic systems.     

Halide, amide, cationic, manganese carbonylate, and oxide derivatives of triamidosilylamine uranium complexes

Treatment of the complex [U(Tren(TMS))(Cl)(THF)] [1, Tren(TMS) = N(CH(2)CH(2)NSiMe(3))(3)] with Me(3)SiI at room temperature afforded known crystalline [U(Tren(TMS))(I)(THF)] (2), which is reported as a new polymorph. Sublimation of 2 at 160 °C and 10(-6) mmHg afforded the solvent-free dimer complex [{U(Tren(TMS))(μ-I)}(2)] (3), which crystallizes in two polymorphic forms. During routine preparations of 1, an additional complex identified as [U(Cl)(5)(THF)][Li(THF)(4)] (4) was isolated in very low yield due to the presence of a slight excess of [U(Cl)(4)(THF)(3)] in one batch. Reaction of 1 with one equivalent of lithium dicyclohexylamide or bis(trimethylsilyl)amide gave the corresponding amide complexes [U(Tren(TMS))(NR(2))] (5, R = cyclohexyl; 6, R = trimethylsilyl), which both afforded the cationic, separated ion pair complex [U(Tren(TMS))(THF)(2)][BPh(4)] (7) following treatment of the respective amides with Et(3)NH·BPh(4). The analogous reaction of 5 with Et(3)NH·BAr(f)(4) [Ar(f) = C(6)H(3)-3,5-(CF(3))(2)] afforded, following addition of 1 to give a crystallizable compound, the cationic, separated ion pair complex [{U(Tren(TMS))(THF)}(2)(μ-Cl)][BAr(f)(4)] (8). Reaction of 7 with K[Mn(CO)(5)] or 5 or 6 with [HMn(CO)(5)] in THF afforded [U(Tren(TMS))(THF)(μ-OC)Mn(CO)(4)] (9); when these reactions were repeated in the presence of 1,2-dimethoxyethane (DME), the separated ion pair [U(Tren(TMS))(DME)][Mn(CO)(5)] (10) was isolated instead. Reaction of 5 with [HMn(CO)(5)] in toluene afforded [{U(Tren(TMS))(μ-OC)(2)Mn(CO)(3)}(2)] (11). Similarly, reaction of the cyclometalated complex [U{N(CH(2)CH(2)NSiMe(2)Bu(t))(2)(CH(2)CH(2)NSiMeBu(t)CH(2))}] with [HMn(CO)(5)] gave [{U(Tren(DMSB))(μ-OC)(2)Mn(CO)(3)}(2)] [12, Tren(DMSB) = N(CH(2)CH(2)NSiMe(2)Bu(t))(3)]. Attempts to prepare the manganocene derivative [U(Tren(TMS))MnCp(2)] from 7 and K[MnCp(2)] were unsuccessful and resulted in formation of [{U(Tren(TMS))}(2)(μ-O)] (13) and [MnCp(2)]. Complexes 3-13 have been characterized by X-ray crystallography, (1)H NMR spectroscopy, FTIR spectroscopy, Evans method magnetic moment, and CHN microanalyses.     

C2-symmetric bis(oxazolinato)lanthanide catalysts for enantioselective intramolecular hydroamination/cyclization

C(2)-symmetric bis(oxazolinato)lanthanide complexes of the type [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), [(4S,5R)-Ar(2)Box]La[N(TMS)(2)](2), and [(4S)-Ph-5,5-Me(2)Box]La[N(TMS)(2)](2) (Box = 2,2'-bis(2-oxazoline)methylenyl; Ar = 4-tert-butylphenyl, 1-naphthyl; TMS = SiMe(3)) serve as precatalysts for the efficient enantioselective intramolecular hydroamination/cyclization of aminoalkenes and aminodienes. These new catalyst systems are conveniently generated in situ from the known metal precursors Ln[N(TMS)(2)](3) or Ln[CH(TMS)(2)](3) (Ln = La, Nd, Sm, Y, Lu) and 1.2 equiv of commercially available or readily prepared bis(oxazoline) ligands such as (4R,5S)-Ph(2)BoxH, (4S,5R)-Ar(2)BoxH, and (4S)-Ph-5,5-Me(2)BoxH. The X-ray crystal structure of [(4S)-(t)BuBox]Lu[CH(TMS)(2)](2) provides insight into the structure of the in situ generated precatalyst species. Lanthanides having the largest ionic radii exhibit the highest turnover frequencies as well as enantioselectivities. Reaction rates maximize near 1:1 BoxH:Ln ratio (ligand acceleration); however, increasing the ratio to 2:1 BoxH:Ln decreases the reaction rate, while affording enantiomeric excesses similar to the 1:1 BoxH:Ln case. A screening study of bis(oxazoline) ligands reveals that aryl stereodirecting groups at the oxazoline ring 4 position and additional substitution (geminal dimethyl or aryl) at the 5 position are crucial for high turnover frequencies and good enantioselectivities. The optimized precatalyst, in situ generated [(4R,5S)-Ph(2)Box]La[N(TMS)(2)](2), exhibits good rates and enantioselectivities, comparable to or greater than those achieved with chiral C(1)-symmetric organolanthanocene catalysts, even for poorly responsive substrates (up to 67% ee at 23 degrees C). Kinetic studies reveal that hydroamination rates are zero order in [amine substrate] and first order in [catalyst], implicating the same general mechanism for organolanthanide-catalyzed hydroamination/cyclizations (intramolecular turnover-limiting olefin insertion followed by the rapid protonolysis of an Ln-C bond by amine substrate) and implying that the active catalytic species is monomeric.     

Mass spectrometry of hydroxy dicarboxylic acids as trimethylsilyl derivatives. Rearrangement fragmentations

Gas chromatography—mass spectrometry offers a convenient method for the separation and identification of hydroxy dicarboxylic acids as open-chain trimethylsilyl (TMS) derivatives. Mass spectra were studied of aldaric (tartronic, tartaric, pentaric and hexaric) acids and deoxyaldaric (malic, 2-deoxypentaric, 2-deoxyhexaric, 3-deoxypentaric and 3-deoxyhexaric) acids. The different structural types can be readily identified from their characteristic spectra. The most prominent fragmentations involving the rupture of one bond are the loss of a siliconlinked methyl group and the formation of α-cleavage ions by carbon chain cleavage. The further decay is characterized by a number of significant rearrangements specific of TMS derivatives. Several of these can be classified as involving migration of a TMS group to an oxygen atom or migration of an ester OTMS group to a silicon atom. Concomitant loss of a stable molecule often provides a driving force. Prominent odd-electron ions are formed by a McLafferty-type rearrangement of a TMS group. The decomposition of several even-electron ions can be regarded as analogous to that rearrangement.     

Trimethylsilyl‐Protected Alkynes as Selective Cross‐Coupling Partners in Titanium‐Catalyzed [2+2+1] Pyrrole Synthesis

Trimethylsilyl (TMS)‐protected alkynes served as selective alkyne cross‐coupling partners in titanium‐catalyzed [2+2+1] pyrrole synthesis. Reactions of TMS‐protected alkynes with internal alkynes and azobenzene under the catalysis of titanium imido complexes yielded pentasubstituted 2‐TMS‐pyrroles with greater than 90 % selectivity over the other nine possible pyrrole products. The steric and electronic effects of the TMS group were both identified to play key roles in this highly selective pyrrole synthesis. This strategy provides a convenient method to synthesize multisubstituted pyrroles as well as an entry point for further pyrrole diversification through facile modification of the resulting 2‐silyl pyrrole products, as demonstrated through a short formal synthesis of the marine natural product lamellarin R.     

Organolanthanide-catalyzed intramolecular hydroamination/cyclization/bicyclization of sterically encumbered substrates. Scope, selectivity, and catalyst thermal stability for amine-tethered unactivated 1,2-disubstituted alkenes

This paper reports the organolanthanide-catalyzed intramolecular hydroamination/cyclization of amine-tethered unactivated 1,2-disubstituted alkenes to afford the corresponding mono- and disubstituted pyrrolidines and piperidines using coordinatively unsaturated complexes of the type (eta(5)-Me(5)C(5))(2)LnCH(TMS)(2) (Ln = La, Sm), [Me(2)Si(eta(5)-Me(4)C(5))(2)]SmCH(TMS)(2), and [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) (Ln = Sm, Y, Yb, Lu; E = N, CH) as precatalysts. [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) mediates intramolecular hydroamination/cyclization of sterically demanding amino-olefins to afford disubstituted pyrrolidines in high diastereoselectivity (trans/cis = 16/1) and good to excellent yield. In addition, chiral C(1)-symmetric organolanthanide catalysts of the type [Me(2)Si(OHF)(CpR*)]LnN(TMS)(2) (OHF = eta(5)-octahydrofluorenyl; Cp = eta(5)-C(5)H(3); R* = (-)-menthyl; Ln = Sm, Y), and [Me(2)Si(eta(5)-Me(4)C(5))(CpR*)]SmN(TMS)(2) (Cp = eta(5)-H(3)C(5); R* = (-)-menthyl) mediate asymmetric intramolecular hydroamination/cyclization of amines bearing internal olefins and afford chiral 2-substituted piperidine and pyrrolidine in enantioselectivities as high as 84:16 er at 60 degrees C. The substrate of the structure NH(2)CH(2)CMe(2)CH(2)CH=CH(CH(2))(2)CH=CH(2) is regiospecifically bicyclized by [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) to the corresponding indolizidine skeleton in good yield and high diastereoselectivity. Thermolysis of (eta(5)-Me(5)C(5))(2)LaCH(TMS)(2) in cyclohexane-d(12) at 120 degrees C rapidly releases CH(2)(SiMe(3))(2) and leads to possible formation of fulvene (eta(6)-Me(4)C(5)CH(2)-) species. The thermolysis product readily reverts to active catalysts upon protonolysis by substrate and exhibits the same catalytic activity as the (eta(5),eta(1)-Me(5)C(5))(2)LaCH(TMS)(2) precatalyst at 120 degrees C in the cyclization of cis-2,2-dimethylhept-5-enylamine. Catalytically-active lanthanide-amido complexes (eta(5)-Me(5)C(5))(2)La(NHR)(NH(2)R)(n) and [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]Sm(NHR)(NH(2)R)(n) are shown to be thermally robust species.     

Selenide‐chitosan as High‐performance Nanophotocatalyst for Accelerated Degradation of Pollutants

Water pollution is one of the major global challenges today. Water bodies are contaminated by the heavy release of waste effluents of textile industries, which includes intensively colored dye pollutants. Herein, a ternary nanocomposite of bismuth copper selenide with small particle size and ternary metal selenide (TMS)‐chitosan microspheres (TMS‐CM) of the spherical porous surface were successfully synthesized. SEM, XRD, EDX, FTIR, and UV/Vis spectrophotometry analysis revealed the structural and morphological characteristics of the newly synthesized nanocomposites. SEM imaging showed the average diameter of TMS nanoparticle to be 33 nm. The crystal size was calculated as 6.33 nm and crystalline structure as orthorhombic using XRD findings. EDX confirmed the presence of Bi, Cu, and Se in the ternary nanocomposite. The bandgap of 1.8 eV was calculated from Tauc's plot for the TMS nanocomposite. SEM confirmed the successful synthesis of spherical TMS‐CM microspheres of porous surface morphology with an average size of 885.6 μm. The presence of chitosan microspheres in the synthesis of TMS nanocomposite was identified by FTIR spectral analysis. Furthermore, highly efficient photocatalytic degradation (up to 95.4%) of ARS was achieved within 180 min at pH 4.0 using 0.5 g of TMS‐CM in sunlight. The first‐order kinetic model fitted well to the photocatalytic decontamination of ARS using TMS‐CM with a rate constant of 6.1x10^?2 min^?1. The TMS‐CM gave attractive results and high efficiency in photocatalytic degradation of ARS dye after reusing and regeneration of up to seven successive cycles. The newly synthesized nanophotocatalyst could be efficiently used for the decontamination of dye polluted water from textile industries.     

Fragmentation of trimethylsilyl derivatives of 2-alkoxyphenols: A further violation of the ‘even-electron rule’

The mass spectra of trimethylsilyl (TMS) ethers of 2-methoxyphenols show abundant [M–30]⁺˙ ions originating from consecutive loss of two methyl radicals. This is illustrated by comparison of the accurate mass-measured and linked-scan spectra of the TMS derivatives of 2-methoxyphenol (guaiacol), 4-hydroxy-3-methoxybenzaldehyde (vanillin) and 3-(4-hydroxy-3-methoxyphenyl)-2-propenoic acid methyl ester (ferulic acid methyl ester) with those of the TMS derivatives of phenol, 4-hydroxybenzaldehyde, 3-(4-hydroxyphenyl)-2-propenoic acid methyl ester (p-coumaric acid methyl ester), 3-methoxyphenol and 4-methoxyphenol. This distinctive ortho effect is valuable in the identification of isomeric phenolic compounds. In the spectra of the TMS derivatives of 2-ethoxyphenol and 2-propoxyphenol the sequential loss of two radicals is less pronounced, because elimination of the side-chain and a methyl group with rearrangement and hydrogen migration is competitive.     

Triple-function Hydrated Eutectic Electrolyte for Enhanced Aqueous Zinc Batteries

Aqueous rechargeable zinc-ion batteries (ARZBs) are impeded by the mutual problems of unstable cathode, electrolyte parasitic reactions, and dendritic growth of zinc (Zn) anode. Herein, a triple-functional strategy by introducing the tetramethylene sulfone (TMS) to form a hydrated eutectic electrolyte is reported to ameliorate these issues. The activity of H₂O is inhibited by reconstructing hydrogen bonds due to the strong interaction between TMS and H₂O. Meanwhile, the preferentially adsorbed TMS on the Zn surface increases the thickness of double electric layer (EDL) structure, which provides a shielding buffer layer to suppress dendrite growth. Interestingly, TMS modulates the primary solvation shell of Zn²⁺ ultimately to achieve a novel solvent co-intercalation ((Zn-TMS)²⁺) mechanism, and the intercalated TMS works as a “pillar” that provides more zincophilic sites and stabilizes the structure of cathode (NH₄V₄O₁₀, (NVO)). Consequently, the Zn||NVO battery exhibits a remarkably high specific capacity of 515.6 mAh g⁻¹ at a low current density of 0.2 A g⁻¹ for over 40 days. This multi-functional electrolytes and solvent co-intercalation mechanism will significantly propel the practical development of aqueous batteries.     

Glow discharge polymerization in the mixture of tetramethylsilane and ammonia gas

Colorless, transparent, and filmy polymers prepared from mixtures of tetramethylsilane (TMS) and ammonia gas (NH₃) were investigated by elemental analysis, infrared (IR) spectroscopy, and ESCA. These polymers contained a large amount of nitrogen residues in the form of amine, amide, and amine oxide groups. Their concentration varied with the composition of the starting TMS/NH₃ mixtures. The mixing of NH₃ gas with TMS influenced the chemical state of Si residues and accelerated the oxidation of Si atoms to form silicon oxides such as SiO, Si₂O₃, and SiO₂. The polymers formed by glow discharge polymerization in the TMS/NH₃ mixtures were combinations of Si- and N-containing polymers and silicon oxides.     

Sulfonic Acid-functionalized gold nanoparticles: a colloid-bound catalyst for soft lithographic application on self-assembled monolayers

In this report, we present a new lithographic approach to prepare patterned surfaces. Self-assembled monolayers (SAMs) of the acid-labile trimethylsilyl ether (TMS-OC(11)H(22)S)(2) (TMS adsorbate) was formed on gold. 5-Mercapto-2-benzimidazole sulfonic acid sodium salt (MBS-Na(+)) was used as a ligand for gold nanoparticles. These monolayer-protected gold colloids (MPCs) were transformed into the catalytically active H(+)-form by ion exchange. This colloid-bound catalyst hydrolyzed the TMS adsorbate (TMS-OC(11)H(22)S)(2) both in solution and when self-assembled on gold surfaces. Microcontact printing of the active colloid-bound catalyst on the preformed TMS SAM led to the deposition of the colloid onto the SAMs. After the catalyst nanoparticles were rinsed off, a patterned surface was created as shown by AFM.     

Reversible Stannylenoid Formation from the Corresponding Stannylene and Cesium Fluoride

A fluorostannylenoid ( Cs⁺[R₂SnF]^? ( 9 ), R₂=(TMS)₂CCH₂CH₂C(TMS)₂) was prepared by reacting a stable dialkylstannylene (R₂Sn ( 8 ), R₂=(TMS)₂CCH₂CH₂C(TMS)₂) with cesium fluoride at room temperature in THF. While 9 is stable in THF and DME, removal of the solvent leads to the regeneration of stannylene 8 . No reaction occurred when 8 was treated with CsF in a hydrocarbon solvent. Addition of dibenzo‐21‐crown‐7 ether to the THF solution of stannylenoid 9 followed by usual workup affords the corresponding crystalline stannylenoid crown ether complex, the X‐ray structural analysis of which revealed a fluorine‐bridged contact ion‐pair structure. The reaction of 9 with excess phenylacetylene gives the corresponding di(phenylethynyl)stannane.     

ESR Study of Trimethylsilane Plasma Polymer Part II; Effect of Consecutive Treatments and Mixed Gases

An ESR study has indicated that a second plasma treatment on plasma deposited films from trimethylsilane (TMS) monomer gas has the ability to modify the characteristics of the primary plasma polymer significantly in a favorable manner for many applications. The effect of the second plasma polymerization on the primary plasma polymer of TMS depends on the nature of the second monomer. Plasma of F-containing monomer, hexafluoroethane (HFE) and perfluoromethane (CF₄), decreases the ESR signal of TMS and no detectable signal due to F-containing monomer was found. The decay rate of the signal decreased significantly. In contrast to this situation, CH₄ plasma treatment yields an ESR signal that is a composite of that observed from TMS and CH₄ films individually. The overall signal increased in this instance, but didn't show appreciable decay in 24 hr period. A second treatment by nonpolymer forming plasmas also decreased the ESR signal of TMS, and decreased the decay rate, indicating that the second gas plasma treatment yields a somewhat similar effect found with the HFE plasma treatment. Plasma polymerization of mixtures of TMS and nonpolymer-forming gases increased the ESR signal but decreased the decay rate, except in the case of oxygen. A mixture of (TMS + O₂) behaved as a completely different monomer. No ESR signal was found in this system. The ESR analysis was supported by XPS data and an insight into the mechanisms occurring in these thin films are discussed.