A new spectrofluorometric method for the determination of ascorbic acid based on its activating effect on a hemoglobin-catalyzed reaction.

A spectrofluorometric method for the determination of ascorbic acid (AA) based on its activation on the hemoglobin-catalyzed reaction was proposed. The fluorescence intensity of the product was measured under the optimal experimental conditions, i.e. 4.0 x 10(-6) M H2O2, 6.0 x 10(-5) M p-cresol, 1.2 M NH3-NH4Cl (pH 10.4) and 2.0 x 10(-7) M hemoglobin. The order of additions of the reagents was also studied. The activation of AA was found to be associated with a high ammonia concentration. The linear range of the method was 9.0 x 10(-10)-3.6 x 10(-8) M of AA. The detection limit was calculated to be 3.0 x 10(-10) M. The relative standard deviation of this method is 1.6% at 7.0 x 10(-9) M for 11 determinations.     

Determination of ultratrace amounts of ruthenium(III) by the delayed autocatalytic reaction using citric acid.

A method for determination of ultratrace amounts (ppq levels) of ruthenium(III) was developed using a copper(II)-phthalocyanine-3,4',4",4"'-tetrasulfonic sodium salt (Cu-PTS) as an indicator in a potassium bromate autocatalytic reaction system. A satisfactory calibration curve of ruthenium(III) ion was obtained by the time measurement in the concentration range of 1 x 10(-13) M to 5 x 10(-12) M with the relative standard deviation (RSD) of 2.8% (n=5). The determination limits (3sigma) were 3.30 x 10(-14) M (3.34 ppq).     

Simultaneous determination of N,N-dimethylaniline and phenol in wastewater by high-performance liquid chromatography with chemiluminescence detection.

A method using HPLC-CL linkage was developed for simultaneous determination of N,N-dimethylaniline and phenol in wastewater, based on the strong sensitive chemiluminescence of the luminol-K3Fe(CN)6 systems in alkaline medium. The separation was carried out on a Hypersil ODS column with a mobile phase of ethanol-0.01% triethylamine (2:1, v/v). The linear ranges for N,N-dimethylaniline determinations were 2.0 x 10(-7) - 2.5 x 10(-5) g/mL and 4.0 x 10(-5) - 1.5 x 10(-4) g/mL with a detection limit (3sigma) of 1.20 x 10(-8) g/mL; the relative standard deviation (3sigma) for 5.0 x 10(-6) g/mL N,N-dimethylaniline was 1.4% (n = 6). The range for phenol was from 5.1 x 10(-7) to 1.3 x 10(-4) g/mL, and a detection limit (3sigma) of 2.5 x 10(-8) g/mL could be obtained. The method can be useful for the determination of N,N-dimethylaniline and phenol in some environmental samples.     

An improved voltammetric method for the determination of trace amounts of uric acid with electrochemically pretreated carbon paste electrodes

Carbon paste electrodes, preanodized in alkaline medium at 1.4 V vs SCE for a short period of time, exhibit a great shift of the oxidation potential of uric acid in cathodic direction and a marked enhancement of its current response, compared to unpretreated electrodes. These effects are dependent on the preanodization potential and the time imposed on the electrodes as well as on the alkalinity of the supporting electrolyte. The enhanced voltammetric response can be used to determine uric acid in the concentration range of 5.0-4.0 x 10(4) mug/1 (3.0 x 10(-8)-2.4 x 10(-4)M) with a detection limit (3sigma) of 2.0 mug/1 (1.2 x 10(-8)M). Ascorbic acid in less than 30-fold excess does not interfere. For multiple determinations (5 runs), the relative standard deviation is 2.1% at a concentration of 1 mg/1 uric acid. The proposed procedure can be used to determine uric acid in human urine and serum without any preliminary treatment of the samples in an accurate, rapid and simple way.     

Electrocatalytic characteristics of a 1-[4-(ferrocenyl ethynyl)phenyl]-1-ethanone modified carbon-paste electrode in the oxidation of ascorbic acid.

A carbon-paste electrode spiked with 1-[4-(ferrocenyl ethynyl)phenyl]-1-ethanone was constructed by the incorporation of 1-[4-(ferrocenyl ethynyl)phenyl]-1-ethanone in a graphite powder silicon oil matrix. It shown by cyclic voltammetry and double potential-step chronoamperometry, which this ferrocene derivative modified a carbon-paste electrode, can catalyze the ascorbic acid oxidation in an aqueous buffered solution. It has been found that under the optimum conditions (pH 7.00), the oxidation of ascorbic acid at the surface of this carbon paste modified electrode occurs at a potential of about 260 mV less positive than that of an unmodified carbon-paste electrode. The catalytic oxidation peak current was linearly dependent on the ascorbic acid concentration, and a linear calibration curve was obtained in the range of 6 x 10(-5) M-7 x 10(-3) M of ascorbic acid with a correlation coefficient of 0.9997. The detection limit (2sigma) was determined to be 6.3 x 10(-5) M. This method was also used for the determination of ascorbic acid in some pharmaceutical samples, such as effervescent tablets, ampoules and multivitamin syrup, by using a standard addition method. The reliability of the method was established by a parallel determination against the official method.     

A sensitive chemiluminescence method for the determination of H2O2 in exhaled breath condensate

In this paper, a novel flow injection chemiluminescence (FI-CL) method is proposed for the determination of picomolar L(-1) levels of hydrogen peroxide (H(2)O(2)) in exhaled breath condensate (EBC). This method is based on the oxidation of a low concentration of luminol (10(-7) M) by H(2)O(2) at a low concentration level (< 10(-8) M) in an alkaline medium catalyzed by a complex, K(5)[Cu(HIO(6))(2)] (DPC), which is not interfered by other metal ions or horseradish peroxidase (HRP). Under the optimum conditions, H(2)O(2) was determined over the range of 1.0 x 10(-10) to 1.0 x 10(-8) mol L(-1) with a detection limit of (3sigma) of 4.1 x 10(-11) mol L(-1). The relative standard deviation (RSD) was 3.2% for 5 nmol L(-1) H(2)O(2) (n = 7). The proposed method offers the advantages of ultra-sensitivity, selectivity, simplicity and rapidity for H(2)O(2) determination. It was successfully applied to directly determine trace amounts of H(2)O(2) (nmol L(-1)) in human's EBC of both rheum and healthy volunteers. A statistically significant difference was found between patients with rheum (n = 11) and control subjects without rheum (n = 11).     

Determination of NH(3) in pyrolysis gases by ammonia selective electrode

The suitability of ion-selective electrode for the determination of ammonia in pyrolysis gases of fossil fuels was studied. The ammonia was absorbed into acidic solution and two kinds of determination methods were carried out. The ammonia was either measured directly from the acid solution, or ammonia was first released into the gas phase and then determined (air gap method) by the ammonia selective electrode. The electrode functioned well in both cases, but the linear calibration range was rather narrow, slightly more than one tenfold. The quantitative detection limit in the water phase was 5 x 10(-6)M (0.085 ppm) NH(3) and in gas phase operation solutions above 5 x 10(-4)M (8.5 ppm) NH(3) it was possible to measure quantitatively. The applications were carried out with Finnish energy peat samples and a coal sample.     

A flow-cell optosensor for lead based on immobilized dithizone

Dithizone immobilized on XAD-4 resin has been studied as a sensor element of an optical sensor for lead using a flow-cell. Using this arrangement, lead in solution has been determined in the concentration range 1 x 10(-5)-3 x 10(-7)M with a detection limit of 1 x 10(-8)M(i.e., 2 mug/l.). The standard deviation of the method for the measurement of lead at a concentration of 1 x 10(-6)M was found to be 7%. The response of the sensor was reproducible and can be regenerated using 0.01M hydrochloric acid followed by citrate-hydroxylamine solution.     

Kinetic determination of silver ion by its perturbation on Belousov-Zhabotinskii oscillating chemical reaction using potentiometric method.

Silver ion can perturb the Belousov-Zhabotinskii (B-Z) oscillating chemical reaction. Therefore, the B-Z oscillating system was applied in the determination of silver ion by using a platinum wire as an indicator electrode in the potentiometric method. The amplitude of the potentiometric oscillation increased linearly in proportion to [Ag+] in the range of 9.42 x 10(-6) M to 2.54 x 10(-4) M, with a correlation coefficient of 0.999 under the optimum conditions. The obtained LOD (2sigma) was 8.85 x 10(-6) M and the relative standard deviation (RSD) for five measurements of 1 x 10(-4) M silver ion was 5%. The influence of some potentially interference was also investigated.     

Determination of trace aluminum (III) using a novel cerium (IV)-calcein chemiluminescence detection

A simple, sensitive and selective chemiluminescence (CL) method was developed for the direct determination of aluminum (Al). This method is based on that the weak CL of cerium (IV)-calcein can be greatly enhanced by Al(III). The calibration curve was linear over the range 2.0 x 10(-10) to 4.0 x 10(-8)g mL(-1) with a detection limit of 8 x 10(-11)g mL(-1) (3sigma). The R.S.D. was 2.5% by 11 replicated determinations of 1.0 x 10(-9)g mL(-1) Al(III). The proposed method has been used to determine the concentration of Al(III) in real water samples with satisfactory results. The mechanism of the CL reaction was also discussed.     

Kinetic-spectrophotometric determination of ascorbic acid by inhibition of the hydrochloric acid-bromate reaction

A new analytical method was developed for the determination of ascorbic acid in fruit juice and pharmaceuticals. The method is based on its inhibition effect on the reaction between hydrochloric acid and bromate. The decolourisation of Methyl Orange by the reaction products was used to monitor the reaction spectrophotometrically at 510 nm. The linearity range of the calibration graph depends on bromate concentration. The variable affecting the rate of the reaction was investigated. The method is simple, rapid, relatively sensitive and precise. The limit of detection is 7.6 x 10(-6) M and calibration rang is 8 x 10(-6)-1.2 x 10(-3) M ascorbic acid. The relative standard deviation of seven replication determinations of 8 x 10(-6) and 2 x 10(-5) M ascorbic acid was 2.8 and 1.7%, respectively. The influence of potential interfering substance was studied. The method was successfully applied for the determination of ascorbic acid in pharmaceuticals.     

Development of a spectrophotometric determination of siderophores using flow-injection analysis

A method has been developed for the spectrophotometric determination of siderophores using flow-injection analysis (FIA) based on the reaction of siderophores with the ternary complex Eriochrome Cyanine R-Fe(III)-cetyltrimethylammonium bromide. 2,3-Dihydroxybenzoic acid, 2,3-dihydroxynaphthalene, and tolypocine were used as the model iron-binding ligands. The calibration curve for one of the siderophores (tolypocine) is linear in the concentration range 2.6 x 10(-6)-1.5 x 10(-4)M. The determination limit (10sigma) for tolypocine was 2.6 x 10(-6)M. The applicability of the method was demonstrated on the determination of the complexation ability of siderophores produced by some entomopathogenic fungi. Samples can be analysed at a rate of 30 samples per hour.     

Extractive photometric determination of gold(III) with 1-(2',4',6'-trichlorophenyl)-4,4,6-trimethyl-(1H,4H)-2-pyrimidinethiol in presence of tri-iso-octylamine

Tervalent gold was determined spectrophotometrically as its anionic 1:4 gold-thiol complex extracted into chloroform from aqueous acidic medium (1.5M sulphuric acid) in the presence of tri-iso-octylamine. The complex exhibits maximum absorption at 480 nm (molar absorptivity 4.60 x 10(3) l.mole(-1).cm(-1)) and Beer's law is obeyed in the concentration range 5-50 microg of gold(III) per ml. The relative standard deviation and relative error, calculated from ten determinations of solutions containing 15 microg of gold(III) per ml were 1.0% and 0.8%. The method is simple, selective and reproducible. It permits separation of gold(III) from associated elements and its determination in synthetic mixtures.     

Spectrophotometric and spectrofluorometric determination of zinc and cadmium with 2,2'-pyridil bis(2-quinolylhydrazone)

The chelating ligand, 2,2'-pyridil bis(2-quinolylhydrazone), has been used for the spectrophotometric determination of zinc and cadmium in synthetic samples. The molar absorptivities of these metal complexes in 80% ethanol-water solution at pH 8 were found to be 4.60 x 10(4) and 5.10 x 10(4) 1.mole(-1).cm(-1) for zinc and cadmium respectively. Beer's law was obeyed for metal-ion concentrations between 1.0 x 10(-6) and 2.5 x 10(-5)M. The limits of detection were found to be 52 and 79 ng ml for zinc and cadmium respectively. The complexes fluoresced in 80% ethanol-water at pH 8 for zinc and at pH 10 for cadmium. The linear range for fluorescence as a function of metal-ion concentration was found to be 5 x 10(-7)-5 x 10(-6)M for both zinc and cadmium. Transition-metal ions interfere severely with both the spectrophotometric and fluorimetric determinations, and must be removed beforehand. An ion-exchange procedure is suitable for this.     

Electrocatalytic oxidation and highly selective voltammetric determination of L-cysteine at the surface of a 1-[4-(ferrocenyl ethynyl)phenyl]-1-ethanone modified carbon paste electrode.

A carbon paste electrode (CPE) chemically modified with 1-[4-(ferrocenyl ethynyl)phenyl]-1-ethanone (4-FEPEMCPE) was employed to study the electrocatalytic oxidation of L-cysteine using cyclic voltammetry, differential pulse voltammetry and double potential step chronoamperometry as diagnostic techniques. The diffusion coefficient (D = 7.863 x 10(-6) cm2 s(-1)) of L-cysteine was also estimated using chronoamperometry. The electron-transfer coefficient, alpha (= 0.40), for L-cysteine at the surface of 4-FEPEMCPE was determined using cyclic voltammetry technique. It was found that under an optimum pH (= 7.00), the oxidation of L-cysteine at the surface of such an electrode occurred at a potential of about 350 mV less positive than that of an unmodified CPE. The catalytic oxidation peak currents represented a linear dependence on the L-cysteine concentration. Linear analytical curves were obtained in the ranges of 9.0 x 10(-5) - 4.9 x 10(-3) M and 2.0 x 10(-5) - 2.8 x 10(-3) M of L-cysteine with correlation coefficients of 0.9981 and 0.9982 in cyclic voltammetry and differential pulse voltammetry, respectively. The detection limits (2 sigma) were determined to be 9.9 x 10(-6) M and 5 x 10(-6) M with cyclic voltammetry and differential pulse voltammetry, respectively. The influences of twenty other amino acids, such as glutamine, L-glutamic acid, L-glysine, L-histidine, L-isoleucine, L-leucine, L-arginine hydrochloride, L-aspargine, L-aspartic acid, S-carboxy methyl-L-cysteine, L-methionine, L-phenyl alanine, L-proline, L-serine, L-threonine, L-cystine, cysteamine and gluthathione, on the current response of the sensor were examined. The obtained results did not show any influence on the analytical signal of L-cysteine by these amino acids (except for cysteamine). The method was also used for the selective determination of L-cysteine in patient-blood plasma and some pharmaceutical preparations by using standard addition method.     

Characteristic redox potential-time curve in the iron(II)/nitric acid autocatalytic reaction and its application to a time measurement-determination of folic acid.

A characteristic redox potential-time curve of the iron(II)/nitric acid autocatalytic reaction was applied to a time measurement-determination for sub-microM levels of folic acid. The determination range was 7.5 x 10(-7) - 1.5 x 10(-5) M, the detection limit (3 sigma) was 5.9 x 10(-7) M, and the relative standard deviation was 3.6% (n = 5).     

Differential pulse anodic stripping voltammetric determination of lead(II) with a 1,4-bis(prop-2'-enyloxy)-9,10-anthraquinone modified carbon paste electrode

A sensitive and selective method for the determination of lead(II) with a 1,4-bis(prop-2'-enyloxy)-9,10-anthraquinone (AQ) modified carbon paste electrode has been developed. The method is based on non-electrolytic preconcentration via complex formation with modifier, followed by an accumulation period with a negative potential (-1.5 V), and then by a proper anodic stripping. The analytical performance was evaluated with respect to the quantity of modifier in the paste, concentration of electrolyte solution, preconcentration time, lead(II) concentration, and other variables. A linear calibration graph was obtained in the concentration range 2.00x10(-9)-1.06x10(-5) M Pb(II) (n=21, r=0.9999) with 30 s preconcentration time. The detection limit was found to be 1x10(-9) M. For eight preconcentration/determination cycles, the differential pulse voltammetric response was reproduced with 5.0 and 3.7% relative standard deviations at 2.00x10(-8) and 2.00x10(-6) M Pb(II), respectively. Rapid and convenient renewal of electrode surface allows the use of a single modified electrode surface in multiple analytical determinations over several weeks. Many coexisting metal ions had little or no effect on the determination of lead(II). The developed method was applied to lead determination in waste waters.     

Constructing a new optical sensor for monitoring ammonia in water samples using bis(acetylacetoneethylendiamine)-tributylphosphin cobalt(III) tetraphenylborate complex-coated triacetylcellulose.

A new ammonia optical sensor was designed using bis(acetylacetoneethylendiamine)tributylphosphin cobalt(III) tetraphenylborate complex, coated on transparent triacetylcellulose film as membrane. The change in the absorbance of the optode at the maximum wavelength of 408 nm was related to ammonia concentration in aqueous samples. A buffer solution with a pH of 9 (sodium borate-HCl) was used. The optode was fully regenerated in pH 2. The linear dynamic range for determination of ammonia was 3.3 x 10(-4) to 6.9 x 10(-3) mol l(-1) with a detection limit of 5.0 x 10(-5) mol l(-1) and a response time range of 4 - 6 min. This membrane was successfully applied for determination of ammonia in drinking water.     

Organic-inorganic composite cation-exchanger: poly-o-toluidine Zr(IV) phosphate-based ion-selective membrane electrode for the potentiometric determination of mercury

A new heterogeneous precipitate of an organic-inorganic composite cation-exchanger poly-o-toluidine Zr(IV) phosphate was utilized for the preparation of a Hg(II) ion-sensitive membrane electrode for the determination of Hg(II) ions in real aqueous as well as in real samples. The electrode showed good potentiometric response characteristics, and displayed a linear log[Hg(2+)] versus EMF response over a wide concentration range of 1 x 10(-1) - 1 x 10(-6) M with a Nernstian slope of 30 mV per decade change in concentration with a detection limit of 1 x 10(-6). The membrane electrode showed a very fast response time of 5 s and could be operated well in the pH range 2 - 8. The selectivity coefficients were determined by the mixed-solution method, and revealed that the electrode was selective in the presence of interfering cations; however most of these did not show significant interference in the concentration range of 1 x 10(-1) - 1 x 10(-4) M. The lifetime of the membrane electrode was observed to be 120 days. The analytical utility of this electrode was established by employing it as an indicator electrode in the potentiometric titrations of Hg(2+) ions from a synthetic mixture as well as drain water.     

UV-detection capillary electrophoresis for benzo[a]pyrene and pyrene following a two-step concentration system using homogeneous liquid-liquid extraction and a sweeping method

10(-9) mol l-1 levels of polycyclic aromatic hydrocarbons (PAHs) suspected for certain noxious materials can be determined and separated by UV-detection capillary electrophoresis following a two-step concentration system. When the conditions of the homogeneous liquid-liquid extraction were [THF]T = 5 vol%, [HCl]T = 0.66 mol l-1, and [PFOA]T = 2 x 10(-3) mol l-1 (i.e., the volume of sample solution; 50 ml-->sedimented phase; 30 microliters), the extraction percentages of benzo[a]pyrene (Bap) and pyrene (Py) at 10(-6) mol l-1 were 102 and 97.5%, respectively. Also, when the total concentration factor(volume ratio), which includes that of the sweeping method, was 8335-fold, the determination range of Bap was 6.4 x 10(-9)-8.0 x 10(-7) mol l-1 and for Py, 8.0 x 10(-9)-7.0 x 10(-7) mol l-1. The detection limits (3 sigma) of Bap and Py were 1.6 x 10(-9) and 4.8 x 10(-9) mol l-1, respectively.