MHD flow and heat transfer of micropolar fluid between two porous disks

A numerical study is carried out for the axisymmetric steady laminar incompressible flow of an electrically conducting micropolar fluid between two infinite parallel porous disks with the constant uniform injection through the surface of the disks. The fluid is subjected to an external transverse magnetic field. The governing nonlinear equations of motion are transformed into a dimensionless form through von Karman’s similarity transformation. An algorithm based on a finite difference scheme is used to solve the reduced coupled ordinary differential equations under associated boundary conditions. The effects of the Reynolds number, the magnetic parameter, the micropolar parameter, and the Prandtl number on the flow velocity and temperature distributions are discussed. The results agree well with those of the previously published work for special cases. The investigation predicts that the heat transfer rate at the surfaces of the disks increases with the increases in the Reynolds number, the magnetic parameter, and the Prandtl number. The shear stresses decrease with the increase in the injection while increase with the increase in the applied magnetic field. The shear stress factor is lower for micropolar fluids than for Newtonian fluids, which may be beneficial in the flow and thermal control in the polymeric processing.     

The micropolar fluid model for blood flow through a tapered artery with a stenosis

A micropolar model for axisymmetric blood flow through an axially nonsymmetreic but radially symmetric mild stenosis tapered artery is presented. To estimate the effect of the stenosis shape, a suitable geometry has been considered such that the axial shape of the stenosis can be changed easily just by varying a parameter （referred to as the shape parameter）. The model is also used to study the effect of the taper angle Ф. Flow parameters such as the velocity, the resistance to flow （the resistance impedance）, the wall shear stress distribution in the stenotic region and its magnitude at the maximum height of the stenosis （stenosis throat） have been computed for different values of the shape parameter n, the taper angle Ф, the coupling number N and the micropolar parameter m. It is shown that the resistance to flow decreases with increasing the shape parameter n and the micropolar parameter m while it increases with increasing the coupling number N. So, the magnitude of the resistance impedance is higher for a micropolar fluid than that for a Newtonian fluid model. Finally, the velocity profile, the wall shear stress distribution in the stenotic region and its magnitude at the maximum height of the stenosis are discussed for different values of the parameters involved on the problem.     

Heat and Mass Transfer in MHD Micropolar Flow Over a Vertical Moving Porous Plate in a Porous Medium

An analysis is presented for the problem of free convection with mass transfer flow for a micropolar fluid via a porous medium bounded by a semi-infinite vertical porous plate in the presence of a transverse magnetic field. The plate moves with constant velocity in the longitudinal direction, and the free stream velocity follows an exponentially small perturbation law. A uniform magnetic field acts perpendicularly to the porous surface in which absorbs the micropolar fluid with a suction velocity varying with time. Numerical results of velocity distribution of micropolar fluids are compared with the corresponding flow problems for a Newtonian fluid. Also, the results of the skin-friction coefficient, the couple stress coefficient, the rate of the heat and mass transfers at the wall are prepared with various values of fluid properties and flow conditions.     

Variable fluid properties and thermal radiation effects on flow and heat transfer in micropolar fluid film past moving permeable infinite flat plate with slip velocity

This work deals with the influence of thermal radiation on the problem of the mixed convection thin film flow and heat transfer of a micropolar fluid past a moving infinite vertical porous flat plate with a slip velocity.The fluid viscosity and the thermal conductivity are assumed to be the functions of temperature.The equations governing the flow are solved numerically by the Chebyshev spectral method for some representative value of various parameters.In comparison with the previously published work,the excellent agreement is shown.The effects of various parameters on the velocity,the microrotation velocity,and the temperature profiles,as well as the skin-friction coefficient and the Nusselt number,are plotted and discussed.     

Melting heat transfer effects on stagnation point flow of micropolar fluid saturated in porous medium with internal heat generation （absorption）

The effect of melting heat transfer on the two dimensional boundary layer flow of a micropolar fluid near a stagnation point embedded in a porous medium in the presence of internal heat generation/absorption is investigated. The governing non-linear partial differential equations describing the problem are reduced to a system of non-linear ordinary differential equations using similarity transformations solved numerically using the Chebyshev spectral method. Numerical results for velocity, angular velocity and temperature profiles are shown graphically and discussed for different values of the inverse Darcy number, the heat generation/absorption parameter, and the melting parameter. The effects of the pertinent parameters on the local skin-friction coefficient, the wall couple stress, and the local Nusselt number are tabulated and discussed. The results show that the inverse Darcy number has the effect of enhancing both velocity and temperature and suppressing angular velocity. It is also found that the local skin-friction coefficient decreases, while the local Nusselt number increases as the melting parameter increases.     

Transient free convection with mass transfer MHD micropolar fluid in a porous plate by the network method

The transient problem of coupled heat and mass transfer of a micropolar fluid in magneto‐hydrodynamic free convection from a vertical infinite porous plate with an exponentially decaying heat generating considering the viscous dissipation and ohmic heating effects is studied. Joule heating must be considered when the viscous dissipation and the Prandtl number are large. The non‐dimensional equations for the conservation of mass, momentum, energy and concentration are solved by means a numerical technique based on electric analogy (network simulation method). This method provides the numerical response of the system by running the network in circuit resolution software with the solution to both transient and steady‐state problems at the same time, and its programming does not require manipulation of the sophisticated mathematical software that is inherent in other numerical methods. The effects of the material parameters, viscous dissipation, internal generation and Joule heating on velocity, angular momentum and temperature fields across the boundary layer are investigated. In addition, the skin‐friction coefficient, couple stress coefficient, Nusselt number and Sherwood number are shown in tabular form. The numerical results for velocity and temperature distributions of micropolar fluids are compared with the corresponding flow problems for a Newtonian fluid. Copyright © 2007 John Wiley & Sons, Ltd.     

MHD stagnation point flow of a micropolar fluid towards a heated surface

The problem of two dimensional stagnation point flow of an electrically conducting micropolar fluid impinging normally on a heated surface in the presence of a uniform transverse magnetic field is analyzed. The governing continuity, momentum, angular momentum, and heat equations together with the associated boundary conditions are reduced to dimensionless form using suitable similarity transformations. The reduced self similar non-linear equations are then solved numerically by an algorithm based on the finite difference discretization. The results are further refined by Richardson’s extrapolation. The effects of the magnetic parameter, the micropolar parameters, and the Prandtl number on the flow and temperature fields are predicted in tabular and graphical forms to show the important features of the solution. The study shows that the velocity and thermal boundary layers become thinner as the magnetic parameter is increased. The micropolar fluids display more reduction in shear stress as well as heat transfer rate than that exhibited by Newtonian fluids, which is beneficial in the flow and thermal control of polymeric processing.     

化学反应对竖直平板边界磁流体动力学微极流体滑流的影响

Heat and mass transfer effects on the unsteady flow of a micropolar fluid through a porous medium bounded by a semi-infinite vertical plate in a slip-flow regime are studied taking into account a homogeneous chemical reaction of the first order. A uniform magnetic field acts perpendicular to the porous surface absorb micropolar fluid with a suction velocity varying with time. The free stream velocity follows an exponentially increasing or decreasing small perturbation law. Using the approximate method, the expressions for the velocity microrotation, temperature, and concentration are obtained. Futher, the results of the skin friction coefficient, the couple stress coefficient, and the rate of heat and mass transfer at the wall are presented with various values of fluid properties and flow conditions.     

Analytical investigation of the fluid flow in the interface region between a porous medium and a clear fluid in channels partially filled with a porous medium

In this paper analytical solutions for the steady fully developed laminar fluid flow in the parallel-plate and cylindrical channels partially filled with a porous medium and partially with a clear fluid are presented. The Brinkman-extended Darcy equation is utilized to model the flow in a porous region. The solutions account for the boundary effects and for the stress jump boundary condition at the interface recently suggested by Ochoa-Tapia and Whitaker. The dependence of the velocity on the Darcy number and on the adjustable coefficient in the stress jump boundary condition is investigated. It is shown that accounting for a jump in the shear stress at the interface essentially influences velocity profiles.     

Numerical investigations of asymmetric flow of a micropolar fluid between two porous disks

Numerical solution is presented for the two- dimensional flow of a micropolar fluid between two porous coaxial disks of different permeability for a range of Reynolds number Re （-300≤ Re 〈 0） and permeability parameter A （1.0≤A ≤2.0）. The main flow is superimposed by the injection at the surfaces of the two disks. Von Karman＇s similarity transformations are used to reduce the governing equations of motion to a set of non-linear coupled ordinary differential equations （ODEs） in dimensionless form. An algorithm based on the finite difference method is employed to solve these ODEs and Richardson＇s extrapolation is used to obtain higher order accuracy. The results indicate that the parameters Re and A have a strong influence on the velocity and microrotation profiles, shear stresses at the disks and the position of the viscous/shear layer. The micropolar material constants cl, c2, c3 have profound effect on microrotation as compared to their effect on streamwise and axial velocity profiles. The results of micropolar fluids are compared with the results for Newtonian fluids.     

MHD free-convective flow of micropolar and Newtonian fluids through porous medium in a vertical channel

We have studied the fully-developed free-convective flow of an electrically conducting fluid in a vertical channel occupied by porous medium under the influence of transverse magnetic field. The internal prefecture of the channel is divided into two regions; one region filled with micropolar fluid and the other region with a Newtonian fluid or both the regions filled by Newtonian fluids. Analytical solutions of the governing equations of fluid flow are found to be in excellent agreement with analytical prediction. Analytical results for the details of the velocity, micro-rotation velocity and temperature fields are shown through graphs for various values of physical parameters. It is noticed that Newtonian fluids prop up the linear velocity of the fluid in contrast to micropolar fluid. Also the skin friction coefficient at both the walls is derived and its numerical values are offered through tables.     

Time periodic electroosmotic flow of micropolar fluids through microparallel channel

The time periodic electroosmotic flow of an incompressible micropolar fluid between two infinitely extended microparallel plates is studied.The analytical solutions of the velocity and microrotation are derived under the Debye-H(u|¨)ckel approximation.The effects of the related dimensionless parameters,e.g.,the micropolar parameter,the frequency,the electrokinetic width,and the wall zeta potential ratio of the upper plate to the lower plate,on the electroosmotic velocity and microrotation are investigated.The results show that the amplitudes of the velocity and the volume flow rate will drop to zero when the micropolar parameter increases from 0 to 1.The effects of the electrokinetic width and the frequency on the velocity of the micropolar fluid are similar to those of the Newtonian fluid.However,the dependence of the microrotation on the related parameters mentioned above is complex.In order to describe these effects clearly,the dimensionless microrotation strength and the penetration depth of the microrotation are defined,which are used to explain the variation of the microrotation.In addition,the effects of various parameters on the dimensionless stress tensor at the walls are studied.     

Two fluid flow and heat transfer in an inclined channel containing porous and fluid layer

Convective flow and heat transfer in an inclined channel bounded by two rigid plates held at constant different temperatures with one region filled with porous matrix saturated with a viscous fluid and another region with a clear viscous fluid different from the fluid in first region is studied analytically. The coupled nonlinear governing equations are solved using regular perturbation method. It is found that the presence of porous matrix in one of the region reduces the velocity and temperature. Results have been presented for a wide range of governing parameters such as Grashof number, porous parameter, angle of inclination, ratio of heights of the two layers and also the ratio of viscosities.     

Boundary-layer flow of a micropolar fluid due to a stretching wall

Summary  A Theoretical analysis is carried out to study the boundary-layer flow over a continuously moving surface through an otherwise quiescent micropolar fluid. The transformed boundary-layer equations are solved numerically for a power-law surface velocity using the Keller-box method. The effects of the micropolar K and exponent m parameters on the velocity and microrotation field as well as on the skin-friction group are discussed in a detailed manner. It is shown that there is a near-similarity solution of this problem. The accuracy of the present solution is also discussed. Accepted for publication 1 April 1996     

Two-phase fluid flow in a porous tube: a model for blood flow in capillaries

A theoretical study of blood flow, under the influence of a body force, in a capillary is presented. Blood is modeled as a two-phase fluid consisting of a core region of suspension of all erythrocytes, represented by a micropolar fluid and a plasma layer free from cells modeled as a Newtonian fluid. The capillary is modeled as a porous tube consisting of a thin transition Brinkman layer overlying a porous Darcy region. Analytical expressions for the pressure, microrotation, and velocities for the different regions are given. Plots of pressure, microrotation, and velocities for varying micropolar parameters, hydraulic resistivity, and Newtonian fluid layer thickness are presented. The overall system was found to be sensitive to variations in micropolar coupling number. It was also discovered that high values of hydraulic resistivity result in an overall slower velocity of the micropolar and Newtonian fluid.     

MHD flows of a second grade fluid between two side walls perpendicular to a plate through a porous medium

Exact analytical solutions for magnetohydrodynamic (MHD) flows of an incompressible second grade fluid in a porous medium are developed. The modified Darcy's law for second grade fluid has been used in the flow modelling. The Hall effect is taken into account. The exact solutions for the unsteady flow induced by the time-dependent motion of a plane wall between two side walls perpendicular to the plane has been constructed by means of Fourier sine transforms. The similar solutions for a Newtonian fluid, performing the same motion, appear as limiting cases of the solutions obtained here. The influence of various parameters of interest on the velocity and shear stress at the bottom wall has been shown and discussed through several graphs. A comparison between a Newtonian and a second grade fluids is also made.     

Effect of elastic wall motion on oscillatory flow of micropolar fluid in an annular tube

Summary Oscillatory flow of a micropolar fluid in an annular tube is investigated. The outer wall of the tube is taken to be elastic and the variation in the diameter of the elastic wall due to pulsatile nature of pressure gradient is assumed to be small. The wall motion is governed by a tube law. The nonlinear equations governing the fluid flow and the tube law are solved using perturbation analysis. The steady-streaming phenomenon due to the interaction of convected inertia with viscous effects is studied. The analysis, is carried out for zero mean flow rate. It presents the effects of the elastic nature of the wall combined with micropolar fluid parameters on the mean pressure gradient and wall shear stress for different catheter sizes and frequency parameters. It is found that the effect of micropolarity is of considerable importance for small steady-streaming Reynolds number. Also, it is observed that the relationship between mean pressure gradient and the flow rate depends on the amplitude of the diameter variation, flow rate waveforms and the phase difference between them.     

Free convection boundary layer flow of a micropolar fluid past slender cones

Using the theory of micropolar fluids developed by Eringen, the transverse curvature effects on axisymmetric free convection boundary layer flow of a micropolar fluid past slender vertical cones are investigated. The case of constant surface heat flux is considered in this paper. Using perturbation techniques, the governing equations for momentum, angular momentum and energy have been solved numerically. Graphical representations for the velocity, angular velocity and thermal functions are presented for various physical and fluid property parameters.     

Effect of the rotation,magnetic field and initial stress on peristaltic motion of micropolar fluid

In this work, the effect of magnetic field, rotation and initial stress on peristaltic motion of micropolar fluid in a circular cylindrical flexible tube with viscoelastic or elastic wall properties has been considered. Runge–Kutta technique are used. Runge–Kutta method is developed to solve the governing equations of motion resulting from a perturbation technique for small values of amplitude ratio. The time mean axial velocity profiles are presented for the case of free pumping and analyzed to observe the influence of wall properties, magnetic field, rotation and initial stress for various values of micropolar fluid parameters. In the case of viscoelastic wall, the effect of viscous damping on mean flow reversal at the boundary is seen. The numerical results of the time mean velocity profile are discussed in detail for homogeneous fluid under the effect of wall properties, magnetic field, initial stress and rotation for different cases by figures. The results indicate that the effect of wall properties, rotation, initial stress and magnetic field are very pronounced. Numerical results are given and illustrated graphically.     

Mathematical modelling of couple stresses on fluid flow in constricted tapered artery in presence of slip velocity-effects of catheter

This paper explores the mathematical model for couple stress fluid flow through an annular region. The above model is used for studying the blood flow be-tween the clogged （stenotic） artery and the catheter. The asymmetric nature of the stenosis is considered. The closed form expressions for the physiological parameters such as impedance and shear stress at the wall are obtained. The effects of various geomet-ric parameters and the parameters arising out of the fluid considered are discussed by considering the slip velocity and tapering angle. The study of the above model is very significant as it has direct applications in the treatment of cardiovascular diseases.