Capillary electrochromatography of methylated benzo[a]pyrene isomers. II. Effect of stationary phase tuning

For Part II of our ongoing study, we present a strategy for stationary phase optimization for the capillary electrochromatographic (CEC) separation of the 12 methylated benzo[a]pyrene (MBAP) isomers. Utilizing the optimum mobile phase conditions from Part I of our study as a guide, seven commercially available stationary phases have been evaluated for their ability to separate highly hydrophobic MBAP isomers. Ranging in design from high-performance liquid chromatography (HPLC) to CEC application, each phase was slurry packed in house and tested for CEC suitability and performance. Several stationary phase parameters were investigated for their effects on MBAP separation including bonding type (monomeric or polymeric, % carbon loading, surface coverage), pore size, particle size, and type of alkyl substituent. In this manner, the present state of commercially available packings has been assessed in our laboratory. Utilizing the optimum polymeric C18-5 microm-100 A-PAH stationary phase, the effects of CEC packed bed length and capillary inside diameter (I.D.) were also evaluated. A 50 microm I.D. capillary, 25 cm packed bed length and 75% (v/v) acetonitrile, 12.5 mM Tris, pH 8.0, 20 degrees C at 30 kV, provided resolution of 11 out of 12 MBAP isomers thus showing the effectiveness of CEC for analysis of structurally similar methylated polyaromatic hydrocarbons.     

Factors affecting the reversed-phase liquid chromatographic separation of polycyclic aromatic hydrocarbon isomers

Reversed-phase liquid chromatography (LC) on C₁₈ stationary phases provides excellent selectivity for the separation of polycyclic aromatic hydrocarbons (PAH). Recent studies have shown that several factors affect selectivity for the LC separation of PAH including phase type (monomeric or polymeric), pore diameter and surface area of the silica substrate, and surface density of the C₁₈ ligands. In this paper the separation of eleven PAH isomers of molecular weight 278 is used to further illustrate the effect of stationary phase characteristics and shape of the solute (length-to-breadth ratio, L/B) on retention and selectivity. Only polymeric C₁₈ phases with a high C₁₈ surface coverage provided separation of all eleven isomers and the elution order of these isomers generally followed increasing L/B values. The effect of solute nonplanarity on reversed-phase LC retention was investigated on both monomeric and polymeric phases using a series of planar and nonplanar PAH pairs. For each solute pair, the nonplanar solute eluted earlier than the planar solute, the largest selectivity factors being observed on the C₁₈ phase with the highest percent carbon load. Based on these studies, a model is proposed to describe the retention of PAH on polymeric C₁₈ phases.     

Chromatographic characterization of a bonded liquid crystal stationary phase for HPLC

Summary A chromatographic and thermodynamic study of the compound [4-(allyloxy)benzoyl]-4-methoxyphenyl (ABMP) as a model of a chemically bonded liquid crystal stationary phase for HPLC was undertaken. A number of polycyclic aromatic hydrocarbons (PAHs) and two small solutes, carvone and pulegone, were studied under varying solvent and temperature conditions. Plots of log k vs. % organic in the mobile phase were not completely linear in all cases. The van't Hoff plots revealed at least one phase transition. The enthalpies of solute transfer from the mobile phase to the ABMP phase were determined for several PAHs. All tests indicate that ABMP possess liquid crystal properties when bonded to particulate silica.     

植物油中苯并芘含量测定研究

为建立固相萃取-液相色谱法测定植物油中苯并芘的检验方法,将植物油中的苯并芘用中性氧化铝固相萃取小柱萃取和净化后用反相色谱柱分离,荧光检测器进行了检测。结果表明,苯并芘质量浓度在0．001～0．1μg／mL范围内与峰面积具有良好的线性关系,相关系数r=0．9999,检测限为0．4μg／kg,回收率在88．1％～94．2％之间,RSD为2．42％,操作简便,对样液的净化效果好,结果准确可靠。     

苯并(a)芘的分离与检测研究进展

苯并(a)芘已经被确认为是一种具有高强度的致癌性、致畸性及致基因突变性的稠环芳烃,同时又具有较高的稳定性和隐匿性等特点。苯并(a)芘的存在对环境和人体健康等都产生严重的影响。本文对苯并(a)芘的性质、来源及致病机理进行了详细的介绍,总结了在食品、煤沥青、药材、化妆品以及环境等领域中苯并(a)芘的分离与检测方法,并对苯并(a)芘的分离与检测进行了展望。     

Reversed-phase chiral HPLC and LC/MS analysis with tris(chloromethylphenylcarbamate) derivatives of cellulose and amylose as chiral stationary phases

Three polysaccharide-derived chiral stationary phases (CSP) were evaluated for the resolution of more than 200 racemic compounds of pharmaceutical interest in the reversed-phase (RP) separation mode. The population of test probes was carefully evaluated in order to insure that it covers as completely as possible all structural diversity of chiral pharmaceuticals. RP showed the highest potential for successful chiral resolution in HPLC and LC/MS analysis when compared to normal phase and polar organic separation modes. Method development consisted of optimizing mobile phase eluting strength, nature of organic modifier, nature of additive and column temperature. The newer CSPs, cellulose tris(3-chloro-4-methylphenylcarbamate) and amylose tris(2-chloro-5-methylphenylcarbamate), were compared to the commonly used cellulose tris(3,5-dimethylphenylcarbamate) in regards to their ability to provide baseline resolution. Comparable success rates were observed for these three CSPs of quite complimentary chiral recognition ability. The same method development strategy was evaluated for LC/MS analysis. Diethylamine as additive had a negative effect on analyte response with positive ion mode electrospray (ESI⁺) MS(/MS) detection, even at very low concentration levels (e.g., 0.025%). Decreasing the organic modifier (acetonitrile or methanol) content in the mobile phase often improved enantioselectivity. The column temperature had only a limited effect on chiral resolution, and this effect was compound dependent. Ammonium hydrogencarbonate was the preferred buffer salt for chiral LC with ESI⁺ MS detection for the successful separation and detection of most basic pharmaceutical racemic compounds. Ammonium acetate is a viable alternative to ammonium hydrogencarbonate. Aqueous formic acid with acetonitrile or methanol can be successfully used in the separation of acidic and neutral racemates. Cellulose tris(3-chloro-4-methylphenylcarbamate) and amylose tris(2-chloro-5-methylphenylcarbamate) emerge as CSPs of wide applicability in either commonly used separation modes rivaling such well established CSPs as cellulose tris(3,5-dimethylphenylcarbamate). Screening protocols including these two new CSPs in the preferentially screened set of chiral columns have higher success rates in achieving baseline resolution in shorter screening time.     

Direct Determination of Benzo(a)pyrene and Pyrene in Solid Environmental Samples by Jet-Cooled Spectroscopy

Abstract

We report the direct determination of two polycyclic aromatic hydrocarbons (PAH), Benzo(a)Pyrene [B(a)P] and Pyrene (Pyr), in solid environmental samples, i.e. a marine sediment and scrapings from the interior walls of a steel foundry, by the supersonic jet/laser induced fluorescence technique. We have found limits of detection (LOD) for these samples of 900ng (1.8ppm) for B(a)P and 200ng (0.4ppm) for Pyr. The LOD's for prepared solutions were 100 ng for B(a)P and 40 ng for Pyr. In validating the procedure we have also analyzed a standard mixture of PAH. The results of our analyses of the solid environmental samples agree well with those obtained by chromatography in other laboratories. We have found evidence of incomplete recovery of PAH from soil sediments by a prolonged low temperature Soxhlet extraction using methylene chloride.     

Solid-surface phosphorescence characterization of polycyclic aromatic hydrocarbons and selective determination of benzo(a)pyrene in water samples

This paper presents the phosphorescence characterization of polycyclic aromatic hydrocarbons (PAHs) on solid-surface for obtaining new flow-through phosphorescence optosensors for PAHs-based on-line, immobilized onto a non-ionic resin solid support coupled to a continuous flow system and the applications for the selective determination of benzo(a)pyrene (BaP). The phosphorescent characterization of 15 PAHs, described as major pollutants by the Environmental Protection Agency (EPA) (naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, chrysene, benzo(a)anthracene, benzo(k)fluoranthene, benzo(b)fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene, benzo(g,h,i)perylene and dibenzo(a,h)anthracene) has been carried out. The experimental variables (heavy atom, deoxygenation and organic solvent in samples) for obtaining different possibilities for developing mono and multi-parameter PAH sensors and the conditions for PAH screening have been carefully studied and the experimental conditions to determination of BaP in presence of other PAHs in water samples have been optimized.     

Influence of the vacuum on the separation efficiency in coupled (GC)2-MS

Summary The van Deemter polts for the same glass capillary column one coupled to an FID detector and once to an MS instrument are compared. With full vacuum at the capillary end the column still produces 75% of the maximum attinable separation efficiency.     

反相高效液相色谱法分离2-(氟苯基)-5-甲基苯并恶唑和2-(氯苯基)-5-甲基苯并恶唑的位置异构体

基于商品化的普通色谱柱建立了2-(氟苯基)-5-甲基苯并恶唑和2-(氯苯基)-5-甲基苯并恶唑邻、间、对位置异构体的分离检测方法。色谱柱为Inertsil ODS-SP C₁₈(250 mm×4.6 mm, 5 μm),以乙腈(A)和水(B)为流动相,在60%A~80%A间线性梯度洗脱15 min,流速为1.5 mL/min,柱温40℃,检测波长为310 nm。在质量浓度为2~200 mg/L范围内,2-(氟苯基)-5-甲基苯并恶唑邻、间、对位的异构体、2-(氯苯基)-5-甲基苯并恶唑邻、间、对位的异构体具有良好的线性关系,6种化合物的检出限(S/N=3)依次为0.0307、0.0293、0.0315、0.0226、0.0237、0.0226 mg/L。该法既为5-甲基苯并恶唑与氟苯或氯苯碳氢活化偶联反应制备的异构体混合物提供了一个快速检测的方法,又为2-芳基苯并恶唑类异构体的分离检测提供了参考。     

Ionic effects on electro-optics and residual direct current voltages of twisted nematic liquid crystal cells

By using electro-optical and dielectric absorption [1–4] measurements, we report our investigations of ionic effects on electro-optics and residual direct current voltages (VrDCs) of two polyimide (PI)-aligned twisted nematic (TN) cells with same liquid crystal mixture but different PI-alignment materials. We have also carried out new experimental methods to find out that the observed VrDCs were caused by LC-PI-interfacial trapped ions generated and transported from the LC medium for one TN cell, and from the PI layers for the other TN cell. Our measured VrDCs indicated that the former had two different exponential-decay rates similar to the published results by M. Mizusaki et al. [2] but the latter had only a single exponential-decay rate.     

Simultaneous Determination of Phenanthrene and Benzo(a)pyrene in Water Samples by Synchronous Fluorescence Spectroscopy

Abstract

A simple and sensitive method was developed to simultaneously determine phenanthrene and benzo(a)pyrene in water samples using synchronous fluorescence spectroscopy with a 56-nm Δλ. The method was used to simultaneously determine both compounds in samples of spiked surface water. Analytical recoveries were 96.9–101.1% for phenanthrene and 95.8–103.5% for benzo(a)pyrene. Analytical results were checked for precision with 15 measurements for each compound. Relative standard deviations were 1.9% for phenanthrene and 2.9% for benzo(a)pyrene, which shows that the proposed method is quite precise.     

苯并芘DNA加合物anti-BPDE-N^2-dG四种立体异构体的合成及色谱分离

体外合成了苯并芘DNA加合物-邻二醇环氧苯并芘-脱氧鸟苷加合物(anti-BPDE-N2-dG)四种立体异构体(两对手性异构体)。通过优化体外反应条件,anti-BPDE-N2-dG四种异构体的合成产量较现有合成方法提高了2倍多,为定量检测生物体中anti-BPDE-N2-dG提供了标准品。并首次将五氟苯基色谱柱应用于该立体异构体的色谱分离提纯,通过优化色谱条件,采用常规的五氟苯基色谱柱(250 mm×4.6 mm,5μm),以乙腈-0.1%甲酸水(22.5∶77.5)为流动相,流速1.2 mL/min条件下,45 min内即可分离提纯四种立体异构体。该方法与常规C18柱(250 mm×4.6 mm,5μm)需要160 min,苯基柱(250 mm×4.6 mm,5μm)需要85~100 min才能将四种立体异构体实现色谱分离相比,缩短了分离时间,提高了提纯效率。通过紫外吸收光谱、质谱、圆二色谱对四种立体异构体进行表征,确定出峰顺序为trans(-)、trans(+)、cis(+)、cis(-)-anti-BPDE-N2-dG。此外,利用高效液相色谱-串联质谱(HPLC-MS/MS)检测anti-BPDE-N2-dG四种立体异构体标准品时,使用常规的五氟苯基色谱柱可在30 min内完成分离检测,与相同规格的苯基柱需要60 min相比提高了检测效率。     

Determination of Benzo(a)pyrene in Water by Synchronous Fluorimetry Following Preconcentration on Sephadex Gels

Abstract

Benzo(a)pyrene (BaP) which presents native fluorescence in solution has been determined in waters by synchronous solid-phase spectrofluorimetry. The relative fluorescence intensity of BaP fixed in Sephadex G-25 gel is measured after being packed in an 1-mm silica cell. Spectral characteristics of BaP-gel system are described. The applicable concentration range was 0.52–3.45 μg.L^?1 with a relative standard deviation of 1.2% and detection limit of 0.07 μg.L^?1. The method was applied to the analysis of waters with different provenances.     

Synthesis and characterization of a new type of chemically bonded liquid crystal stationary phase for HPLC

Summary Two commercially available liquid crystals, 4-cyano-4′-n-pentyl-1,1′-bipheny and 4-cyano-4′-n-pentoxy-1,1′-bipheny, are bonded to a silica hydride surface via hydrosilation in the presence of a free radical iniator, t-butyl peroxide. Elemental analysis, diffuse reflectance Fourier trans-form infrared spectroscopy, and¹³C and²⁹Si CP-MAS NMR spectroscopy are used to confirm the success of the bonding reaction. The¹³C CP-MAS spectra suggest a difference in the bonded phase morphology of the two materials. Static hydrolytic stability tests indicate these materials do not degrade significantly in both acidic and basic solutions. Chromatographic tests confirm that these two bonded phase behave differently with respect to their retention of PAHs, alkyl-substituted benzenes and benzodiazepines.     

Solid‐phase microextraction with gas chromatography and mass spectrometry determination of benzo(a)pyrene in microcrystalline waxes used as food additives

Microcrystalline waxes are mixtures of solid, saturated hydrocarbons mainly branched and characterized by a carbon number over C₆₀. They are used as food additives for the surface treatment of confectionery and some fruit varieties, in chewing gum base, protective coatings, defoaming agents, and surface finishing agents. Commission Regulation No 231/2012 established physical and chemical specifications for microcrystalline waxes to use in food, and posed a limit of 50 μg/kg for benzo(a)pyrene. Due to the low solubility of microcrystalline waxes in organic solvents and matrix interferences, analytical determination of benzo(a)pyrene represents a difficult task. The official method for indirect determination of total polycyclic aromatic hydrocarbons uses unspecific spectrophotometric detection and a quite laborious, time‐ and solvent‐consuming extraction method. A liquid–liquid partition method followed by solid‐phase microextraction was developed to isolate benzo(a)pyrene from the bulk of saturated hydrocarbons in microcrystalline waxes, with the aim to have a simple and effective method to verify compliance with the legal limit. The final determination was carried out by gas chromatography coupled to mass spectrometry. Good linearity was obtained, along with a recovery of about 80% from the liquid–liquid partitions. The repeatability of the entire method was <6% and accuracy was <3%.