噻吩在猝冷骨架Ni上吸附脱硫的XPS研究

采用X射线光电子能谱(XPS)研究了室温下噻吩在猝冷骨架Ni吸附剂上的吸附及受热分解行为. 研究结果表明, 298 K时噻吩首先在吸附剂表面发生C—S键断裂, 生成原子硫及含金属的有机环状化合物. 当吸附剂表面完全被解离物种覆盖后, 发生噻吩的多层物理吸附. 加热至373 K, 大部分物理吸附的噻吩直接脱附, 其余部分在碳物种脱附后暴露的Ni表面上发生解离. 473 K时表面的碳物种消失, 而残留在样品上的硫均转化为硫化镍.      

新型固定床Raney Ni制备过程中晶相结构的转化

以拟薄水铝石制备粘结剂，加入镍铝合金粉和田菁粉捏合、成型，在空气中高温焙烧，然后用苛性碱溶液充分浸取，制备出可应用于固定床加氢的活性Raney Ni催化剂。采用XRD和TG-DTA分析了催化剂制备过程中晶相结构的转化，结果表明，成型合金焙烧过程中，富铝合金相（如Al₃Ni-Al和Al₃Ni）逐渐转变为贫铝合金相（如Al₃Ni₂和AlNi），释放出的金属铝依次发生氧化，同时抑制金属镍的氧化；在高于1 123～1 133K焙烧时金属铝氧化生成α-Al₂O₃，使催化剂获得较高的颗粒强度。苯加氢活性评价结果表明，该新型固定床Raney Ni催化剂活性高于负载型镍催化剂，也高于参照专利方法制备的有机聚合物粘结的同类型催化剂，并且具有较好的低温加氢活性。     

Characterization of rapidly and naturally quenched skeletal iron catalysts for FT synthesis

The slurry phase is a promising system for Fischer-Tropsch (FT) synthesis. Since the liquid medium efficiently removes the heat of reaction so that the steady-state reaction is easily achieved. High catalytic activity is maintained due to removal of waxy products from the catalyst surface by the action of solvent. In addition, CO-rich syngas from coal gasification can be directly used in FT synthesis which may increase the thermal efficiency of the indirect coal liquefaction. One of the important problems to be solved for slurry phase FT is the catalyst attrition and separation from wax residue. Fused iron and Raney iron were found to have high attrition resistance and easy to separate from wax in slurry phase FT synthesis, but their activity is relatively low. Amorphous alloys made by rapid quenching techniques have drawn increasing interest due to their superior mechanical,chemical and magnetic properties compared to the thermodynamically stable crystalline alloys of the same compositions. It is reported that rapidly quenched skeletal Ni catalyst showed higher catalytic activity than Raney Ni in selective hydrogenation of unsaturated organic functional groups.In this paper, Fe50Al50 (by weight) alloys with different quenching rates, rapid quenching (RQ) and natural quenching (NQ) were prepared for FT synthesis. The phase composition of alloys was characterized by XRD. The physical properties, thermal-stability and adsorption properties of skeletal Fe that was prepared by leaching aluminum of the corresponding alloy with aqueous solution of NaOH were also studied by BET, in situ XRD and H2- and CO-TPD. It is found from XRD patterns of the alloys that RQ Fe50Al50 is composed of orthorhombic phase, and NQ Fe50Al50 alloy is mainly composed of monoclinic phase. Meanwhile, diffraction peaks of the RQ alloy are seriously broadened. After leaching aluminum by aqueous solution of NaOH at the same conditions,skeletal Fe from the RQ alloy give the higher specific surface area and larger pore volume. The in -situ XRD shows that skeletal Fe from RQ alloy is composed of elemental iron and magnetite (FeFe2O4) with poor crystalline. The skeletal Fe from NQ alloy is mainly composed of elemental Fe and minor magnetite. The higher content of the magnetite phase in RQ skeletal Fe may arise from the higher activity of the RQ alloy. When the skeletal Fe was heated under Ar flow, the content of magnetite phase increased with temperature and became the main composition at 400℃ for the skeletal Fe from the RQ alloy. For the skeletal iron from the NQ alloy, phase change under heating is less obvious compared with that for the RQ skeletal iron. The H2-TPD profiles of the catalysts showed that two H2 desorption peaks appeared in both NQ and RQ skeletal iron, but the temperatures at maximum desorption rate of RQ skeletal iron were higher than those of the NQ skeletal iron. The CO-TPD experiment showed that NQ skeletal iron had the stronger affinity to CO than RQ skeletal iron. The different properties were explained on the basis of structure.     

Interaction of hydrogen with unsupported and supported nickel

The adsorption of molecular hydrogen on Ni powder and on Ni/Al(2)O(3) and Ni/SiO(2) catalysts was studied by the temperature-programmed desorption (TPD) method. The examinations were performed in the flow system, starting the TP measurements at low temperatures of 100 or 78 K, which resulted in the formation of complete characteristics of the interaction of hydrogen with nickel. Generally, three forms of chemisorbed hydrogen were distinguished: alpha, adsorbed on Ni surface, beta, adsorbed in the "second layer", and gamma, located in the subsurface region of nickel. The comparison of the results of this work with those obtained in vacuum systems for various Ni surfaces has led to the conclusion that the same form of hydrogen desorbs from nickel above 200 K in vacuum systems but above 300 K in flow systems. The examinations performed for Ni/Al(2)O(3) and Ni/SiO(2) samples show that alumina suppresses but silica enhances the formation of the beta-form of hydrogen.     

Kinetic behavior of benzene hydrogenation and thiophene hydrogenolysis on sulfide Ni-Mo/Al2O3 catalyst

Summary An unsteady-state kinetic model of both benzene hydrogenation (HDA) and thiophene hydrogenolysis (HDS) on a sulfide hydrotreating catalyst Ni-Mo/Al₂O₃ has been developed. The model adequately describes experimental data obtained at the pressure 2 MPa, temperature 573 K and at various contact times and ratios of benzene/thiophene. The model is based on the assumption that the catalyst surface contains only one type of active sites, i.e., Ni atoms in the sulfide bimetallic species, which are responsible for both hydrogenolysis and hydrogenation reactions.     

Photoemission from matrix-isolated nickel atoms

UV photoelectron spectra from Ni atoms isolated in a xenon matrix at 9 K have been measured for the first time using Hell (40 8 eV). Two peaks have been found at 2.8 and 4.6 eV below E_F, which are interpreted as being due to different d⁸s¹ final states of the Ni ion. including a relaxation shift of 2.0 eV. The existence of atomic Ni species in the matrix has been verified by in situ optical absorption spectra.     

Graft and modified polymers from rubber network. I. Method of obtaining graft and modified polymers from sulfur vulcanizates with dehydrogenated Raney nickel and Raney cobalt

The present paper reports on an investigation of eliminating sulfur from sulfur vulcanizates by using dehydrogenated Raney Ni (Raney Co). The dehydrogenated Raney metal eliminates the sulfur by forming free radicals which recombine with each other. The result is a heavily crosslinked product containing traces of sulfur. When applying dehydrogenated Raney metal in the presence of substances readily producing free radicals or monomers polymerizing by way of a free-radical mechanism, one obtains a modified or a grafted high molecular product.     

The chemistry of CH2I2 on MoAl alloy thin films formed on dehydroxylated alumina: insight into methylene insertion reactions

The chemistry of diiodomethane is explored in ultrahigh vacuum on a MoAl alloy film grown on planar, dehydroxylated alumina by reaction with molybdenum hexacarbonyl. The majority of the diiodomethane forms methylene species below approximately 250 K, although a small proportion forms CH(2)I((ads)), which hydrogenates to form iodomethane. The majority ( approximately 90%) of the adsorbed methylene species thermally decomposes to carbon and hydrogen. The remainder undergoes several reactions, including partial hydrogenation to form adsorbed methyl species or total hydrogenation to form methane. The methyl species can couple forming ethane or undergo methylene insertion reactions to form alkyl species up to C(4). These form alkenes via a beta-hydride elimination reaction. This chemistry is relatively unique, only having been found previously for Ni(110) surfaces. No such chemistry is found on Ni(100) and Ni(111).     

The co-adsorption of carbon monoxide/propyne at 293 K and 573 K over a nickel/alumina catalyst

The adsorption and co-adsorption of carbon monoxide and propyne have been studied over a Ni/alumina catalyst at 293 and 573 K. Co-adsorption was found to give unique results at each temperature.     

Synthesis of higher alicyclic compounds from thiophene derivatives

A new method is proposed for the synthesis of higher alicyclic compounds in which bi- and tricyclic molecules possessing the thiophene ring are desulphurized with the aid of Raney nickel New routes to many-membered bi- and tricyclic compounds possessing the thiophene ring have been developed, based on acyloin condensation and intramolecular acylation and alkylation.     

超细非晶镍合金的化学制备及类金属元素对性质的影响

常温下分别使用KBH4和NaH2PO2在水溶液中还原Ni^2^+制得了Ni65B35和Ni89P11超细非晶合金(UFAAP), 同时使用KBH4和NaH2PO2还原Ni^2^+制得了Ni73P13B14UFAAP. Ni-P的粒径较大, 约为110nm, Ni-B的粒径较小, 约为20nm,Ni-P-B的粒径居其之间, 约为40nm。XPS表明, Ni-P间的相互作用强于Ni-B间的相互作用, Ni-P-B中P的电子状态与Ni-P中的相似。Ni-P-B比Ni-P的比表面积高得多,Ni-P-B比Ni-B和Ni-P具有更好的非晶态稳定性, 在573K热处理, 它的非晶态保持完好。晶化结果也表明Ni-P-B中Ni-P间的相互作用比Ni-B间的强。     

The effect of nickel on the component state and HDS activity of alumina-supported heteropolytungstates

Hydrotreating Ni heteropolytungstate catalysts have been prepared by impregnation of γ-Al₂O₃-alumina with solutions of H₃PW₁₂O₄₀ acid and its Ni salt. The nickel content is varied by adding Ni(NO₃)₂ salt. The calcined samples are characterized by BET, IR, TPR, and XPS techniques. The catalytic activity is tested for HDS of thiophene. It is shown that the initial heteropolyanion, its lacunary analog, and nickel substituted heteropolyanion are present on the surface as a result of the interaction between the active component and the alumina support. The mixed NiWS phase formed after sulfidation determines the HDS activity of the catalysts. Published in Russian in Kinetika i Kataliz, 2007, Vol. 48, No. 6, pp. 905–911. This article was submitted by the authors in English.     

Evolution of titanium(IV) alkoxides and raney nickel for asymmetric reductive amination of prochiral aliphatic ketones

[reaction: see text] A new method for the one-pot asymmetric reductive amination of prochiral aliphatic ketones has been developed. The previously unexplored reagent combination of Ti(O(i)Pr)(4)/Raney Ni/H(2) in the presence of (R)- or (S)-alpha-methylbenzylamine provides good to excellent yield (76-90%) and diastereomeric excess (72-98%). The second step, hydrogenolysis, provides the corresponding primary amine in high yield (88-93%) and with uncompromised enantiomeric excess.     

Effect of nickel deposition on hydrogen permeation behavior of mesoporous gamma-alumina composite membranes

Ni/alumina composite membranes were prepared and investigated for hydrogen separation at high temperature. alpha-Alumina-supported gamma-alumina composite membranes were prepared by soaking-rolling method. In order to improve H2 selectivity and permeance of the gamma-alumina membranes, Ni was deposited by a soaking process. As a result of a single gas permeation test of the Ni/alumina composite membranes, hydrogen permeance and H2/N2 selectivity at permeation temperature of 450 degrees C were 6.29 x 10(-7) mol/m2 s Pa and 5.2 which exceeded theoretical Knudsen selectivity. Contribution of surface diffusion was investigated by temperature dependence of H(2) permeance. The surface diffusion was observed at higher temperature above 250 degrees C. The Ni deposition on surface of the gamma-alumina composite membrane led to hydrogen permeation via Knudsen diffusion combined with surface diffusion, which gave high H2 selectivity exceeding the Knudsen diffusion mechanism.     

Characterization and Catalytic Properties of a Rapidly Quenched Ni-RE-P-AL Catalyst

IntroductionAmorphous.alloy has been found to have superior catalytic properties["']. However, asan applied catalyst, its small surface area and low thermal stability during the catalytic processare the encountered problems usually.In the previous study, we found that addition of a small amount of rare earth element effectively stabilized the amorphous phase in a Ni--P alloyL'~'j, and the surface area of the amorphous Ni--RE--P alloy could be greatly enlarged by introducing Al into the Ni-…     

Synthesis of nickel sulfides in aqueous solutions using sodium dithionite

Reaction of nickel chloride with sodium dithionite in aqueous solutions at ambient temperature has been investigated systematically to obtain nickel sulfides. The products are characterized by X-ray diffraction, thermogravimetric analysis, and electrical resistivity and magnetic susceptibility measurements. It is found that the compositions and structures of the products are controlled by the reaction pH and the amount of the reactants. While reactions under highly acidic (pH < or = 2) and basic (pH > or = 7) conditions yield crystalline sulfur and amorphous or poorly crystalline NiySx, respectively, those at intermediate 3 < or = pH < or = 6 give crystalline NiySx. Both crystalline Ni3S2 (heazlewoodite structure) and Ni3S4 (spinel structure) have been obtained at room temperature. Additionally, NiS (millerite structure) is obtained by carefully heating Ni3S4 at 200 degrees C in a mixture of 90% Ar and 10% H2. Ni3S4 is found to be metastable, and it begins to disproportionate above 100 degrees C. Both Ni3S2 and Ni3S4 show metallic behavior. While Ni3S2 exhibits temperature-independent magnetic susceptibility, Ni3S4 shows ferrimagnetic ordering below 20 K.     

A novel nanostructure of nickel nanotubes encapsulated in carbon nanotubes

A novel nanostructure of Ni nanotubes encapsulated in carbon nanotubes has been obtained via the pyrolysis of C2H2 on an array of Ni nanotubes in an alumina membrane support and a possible mechanism has been proposed.     

超细Ni-B非晶态合金催化糠醛液相加氢制备糠醇

报道了超细Ni－B非晶态合金应用于糠醛液相选择加氢制备糠醇，研究发现，Ni－B非晶态合金催化剂对糠醇的选择性接近100％，而且其催化活性显著高于RaneyNi和超细Ni催化剂，进一步的研究表明，对于Ni-B非晶态合金，其在423K以下进行热处理时，未出现明显的晶化；但在高温下，逐渐发生晶化，并导致催化活性和选择性显著下降，在XRD、SEM、XPS和氢吸附等一系列表征的基础上，初步探讨了催化活性与催化剂结构的关系，并考察了高温晶化对催化性能的影响。     

Raney Ni催化二亚糠基丙酮加氢制取长链烷烃前驱体的特性研究

采用Raney Ni为催化剂,考察了反应温度、压力、时间和溶剂对二亚糠基丙酮加氢制取长链烷烃前驱体催化性能的影响。结果表明,Raney Ni对二亚糠基丙酮具有很好的低温加氢性能,升高反应温度和压力均有利于加氢反应的进行,但过高的温度反而不利于加氢反应。在50℃和2.5 MPa下反应2 h,二亚糠基丙酮转化率达99.5%以上,饱和加氢产物的总选择性达到80.8%。此外,加氢中间产物的变化结果表明,二亚糠基丙酮的双键加氢容易程度为,烯键>呋喃环双键>C=O双键。Raney Ni 在甲醇溶剂中的加氢性能明显高于在四氢呋喃、环己烷或水溶剂中的加氢性能。     

Preparation, characterization and testing of nickel on alumina monolithic catalysts

A series of Ni on alumina washcoated monoliths has been prepared and characterized. The selective liquid-phase hydrogenation of benzaldehyde to benzyl alcohol in a Berty reactor has been used as a test reaction.