Cationic Rh complexes with novel spiro tetraarylpentaborate anions prepared from arylboronic acids and aryloxorhodium complexes

Ar-B(OH)2 (1a: Ar = C6H4OMe-4, 1b: Ar = C6H3Me2-2,6) react immediately with Rh(OC6H4Me-4)(PMe3)3 (2) in 5 : 1 molar ratio at room temperature to generate [Rh(PMe3)4]+[B5O6Ar4]- (3a: Ar = C6H4OMe-4, 3b: Ar = C6H3Me2-2,6). p-Cresol (92%/Rh), anisole (80%/Rh) and H2O (364%/Rh) are formed from 1a and 2. The reaction of 1a with 2 for 24 h produces [Rh(PMe3)4]+[B5O6(OH)4]- (4) as a yellow solid. This is attributed to hydrolytic dearylation of once formed 3a because the direct reaction of 3a with excess H2O forms 4. An equimolar reaction of 2 with phenylboroxine (PhBO)3 causes transfer of the 4-methylphenoxo ligand from rhodium to boron to produce [Rh(PMe3)4]+[B3O3Ph3(OC6H4Me-4)]- (5). Arylboronic acids 1a and 1b react with Rh(OC6H4Me-4)(PR3)3 (6: R = Et, 8: R = Ph) and with Rh(OC6H4Me-4)(cod)(PR3) (11: R = iPr, 12: R = Ph) to form [Rh(PR3)4]+[B5O6Ar4]- (7a: R = Et, Ar = C6H4OMe-4, 7b: R = Et, Ar = C6H3Me2-2,6, 9a: R = Ph, Ar = C6H3Me2-2,6) and [Rh(cod)(PR3)(L)]+[B5O6Ar4]- (13b: R = iPr, L = acetone, Ar = C6H3Me2-2,6, 14a: R = Ph, L = PPh3, Ar = C6H4OMe-4, 14b: R = Ph, L = PPh3, Ar = C6H3Me2-2,6), respectively. Hydrolysis of 14a yields [Rh(cod)(PPh3)2]+[B5O6(OH)4]- (15) quantitatively.     

Effects of Cyclopentadienyl and Phosphine Ligands on the Basicities and Nucleophilicities of Cp'Ir(CO)(PR(3)) Complexes

Basicities of the series of complexes CpIr(CO)(PR(3)) [PR(3) = P(p-C(6)H(4)CF(3))(3), P(p-C(6)H(4)F)(3), P(p-C(6)H(4)Cl)(3), PPh(3), P(p-C(6)H(4)CH(3))(3), P(p-C(6)H(4)OCH(3))(3), PPh(2)Me, PPhMe(2), PMe(3), PEt(3), PCy(3)] have been measured by the heat evolved (DeltaH(HM)) when the complex is protonated by CF(3)SO(3)H in 1,2-dichloroethane (DCE) at 25.0 degrees C. The -DeltaH(HM) values range from 28.0 kcal/mol for CpIr(CO)[P(p-C(6)H(4)CF(3))(3)] to 33.2 kcal/mol for CpIr(CO)(PMe(3)) and are directly related to the basicities of the PR(3) ligands in the complexes. For the more basic pentamethylcyclopentadienyl analogs, the -DeltaH(HM) values range from 33.8 kcal/mol for the weakest base CpIr(CO)[P(p-C(6)H(4)CF(3))(3)] to 38.0 kcal/mol for the strongest CpIr(CO)(PMe(3)). The nucleophilicities of the Cp'Ir(CO)(PR(3)) complexes were established from second-order rate constants (k) for their reactions with CH(3)I to give [Cp'Ir(CO)(PR(3))(CH(3))](+)I(-) in CD(2)Cl(2) at 25.0 degrees C. There is an excellent linear correlation between the basicities (DeltaH(HM)) and nucleophilicities (log k) of the CpIr(CO)(PR(3)) complexes. Only the complex CpIr(CO)(PCy(3)) with the bulky tricyclohexylphosphine ligand deviates dramatically from the trend. In general, the pentamethylcyclopentadienyl complexes react 40 times faster than the cyclopentadienyl analogs. However, they do not react as fast as predicted from electronic properties of the complexes, which suggests that the steric size of the Cp ligand reduces the nucleophilicities of the CpIr(CO)(PR(3)) complexes. In addition, heats of protonation (DeltaH(HP)) of tris(2-methoxyphenyl)phosphine, tris(2,6-dimethoxyphenyl)phosphine, and tris(2,4,6-trimethylphenyl)phosphine were measured and used to estimate pK(a) values for these highly basic phosphines.     

Electron-rich diferrous-phosphane-thiolates relevant to Fe-only hydrogenase: is cyanide "nature's trimethylphosphane"?

The two-step one-pot oxidative decarbonylation of [Fe2(S2C2H4)(CO)4(PMe3)2] (1) with [FeCp2]PF6, followed by addition of phosphane ligands, led to a series of diferrous dithiolato carbonyls 2-6, containing three or four phosphane ligands. In situ measurements indicate efficient formation of 1(2+) as the initial intermediate of the oxidation of 1, even when a deficiency of the oxidant was employed. Subsequent addition of PR3 gave rise to [Fe2(S2C2H4)(mu-CO)(CO)3(PMe3)3]2+ (2) and [Fe2(S2C2H4)(mu-CO)(CO)2(PMe3)2(PR3)2]2+ (R = Me 3, OMe 4) as principal products. One terminal CO ligand in these complexes was readily substituted by MeCN, and [Fe2(S2C2H4)(mu-CO)(CO)2(PMe3)3(MeCN)]2+ (5) and [Fe2(S2C2H4)(mu-CO)(CO)(PMe3)4(MeCN)]2+ (6) were fully characterized. Relevant to the H(red) state of the active site of Fe-only hydrogenases, the unsymmetrical derivatives 5 and 6 feature a semibridging CO ligand trans to a labile coordination site.     

Solution and solid-state structures of phosphine adducts of monomeric zinc bisphenoxide complexes. Importance of these derivatives in CO2/epoxide copolymerization processes

Phosphine derivatives of the monomeric zinc phenoxide complexes, (phenoxide)2ZnLn, where phenoxide equals 2,6-di-tert-butylphenoxide, 2,4,6-tri-tert-butylphenoxide, and 2,6-diphenylphenoxide and n = 1 or 2, have been synthesized from the reaction of Zn[N(SiMe3)2]2 and the corresponding phenol followed by the addition of phosphine. The complexes have been characterized in solution by 31P NMR spectroscopy and in selected instances in the solid-state by X-ray crystallography. The small, basic phosphine, PMe3, provided the only case of an isolated complex possessing two phosphine ligands (i.e., n = 2). For all other larger phosphines only the monophosphine adducts were obtained. Furthermore, only fairly basic phosphines were found to bind to zinc, e.g., whereas PPh3 (pKa = 2.73) was ineffective, PPh2Me (pKa = 4.57) did form a strong bond to zinc. The solid-state structures of the monophosphine adducts consist of a near-trigonal planar geometry about the zinc center, where the average P-Zn-O angles are larger than the O-Zn-O angles. On the other hand, the bisphosphine adduct, Zn(O-2,4,6-tBu3C6H2)(2).2PMe3, is a distorted tetrahedral structure with O-Zn-O and P-Zn-P bond angles of 108.8(2) degrees and 107.1(9) degrees, respectively. Competitive phosphine binding studies monitored by 31P NMR spectroscopy provided a relative binding order of PPh3 approximately PtBu3 < PPh2Me < PCy3 < PMe2Ph < PnBu3 < PEt3 < PMe3. Hence, the relative binding of basic phosphine ligands at these congested zinc sites is largely determined by their steric requirements. All phosphine adducts, with the exception of PMe2Ph and PMe3, were found to undergo slow self-exchange (< 600 s-1) with free phosphine by 31P NMR spectroscopy. However, the two small phosphines, PMe2Ph (cone angle = 122 degrees) and PMe3 (cone angle = 118 degrees), were shown to undergo rapid exchange presumably via an associative mechanism. Although there was no kinetic preferences for PCy3 binding to cadmium vs zinc, cadmium was thermodynamically favored by about a factor of 2.5. The addition of up to 3 equiv of PCy3 to the Zn(O-2,6-tBu2C6H3)2 or Zn(O-2,4,6-tBu3C6H2)2 derivatives did not significantly alter the reactivity of these catalysts for the copolymerization of cyclohexene oxide (CHO) and CO2 to high-molecular weight poly(cyclohexene carbonate). However, the presence of PCy3 greatly retarded their ability to homopolymerize CHO to polyether or to afford polyether linkages during the copolymerization of CHO/CO2.     

A computational study of ethylene C-H bond activation by

It has previously been demonstrated that both [(C5Me5)Ir(PMe3)(CH=CH2)H] and [(C5Me5)Ir(PMe3)(H2C=CH2)] are formed when [(C5Me5)Ir(PMe3)] is thermolytically generated in the presence of ethylene. At higher temperatures, the vinyl hydride is converted to the eta2-ethylene adduct. Density functional theory has now been used to investigate this reaction, using the B3LYP functional, two types of basis sets (LanL2DZ and TZV*), and two models of the [(C5R5)Ir(PR3)] species (R=H and CH3). The study consists of full optimizations of local minima, first-order saddle points, and minimum energy crossing points (MECP). The experimental results are best accounted for by considering both singlet and triplet spin surfaces. The relative energies of singlet [(C5R5)Ir(PR3)(CH3)H], [(C5R5)Ir(PR3)(CH=CH2)H], and [(C5R5)Ir(PR3)(H2C=CH2)] are in good agreement with experiment, as is the calculated barrier for the conversion from the vinyl hydride to the eta2-alkene complex. However, the singlet surface alone fails to explain the experimentally observed product ratio, or the intermediate inferred from experimental isotope effect studies. Locating the MECP between singlet and triplet surfaces indicates that the thermolysis of the singlet alkyl hydride precursor directly forms triplet [(C5R5)Ir(PR3)]. The weak vanderWaals adduct of triplet [(C5R5)Ir(PR3)] and ethylene is proposed to be the key intermediate in the overall reaction. The interchanging of the available ethylene C-H bonds in this triplet sigma complex accounts for the observed kinetic isotope effects, and partitioning between alkene pi-complexation and C-H bond activation may also occur from this common intermediate. The possible role of steric factors and molecular dynamics are also discussed.     

A tungsten-183NMR study of cis and trans isomers of [W(CO)4(PPh3)(PR3)](PR3 = phosphine, phosphite)

Tungsten-183 NMR data are reported for the complexes cis- and trans-[W(CO)4(PPh3)(PR3)] (PR3 = PnBu3, PMe3, PMe2Ph, PMePh2, PPh3, P(4-C6H4OMe)3, P(4-C6H4Me)3, P(4-C6H4F)3, P(OMe)3, P(OEt)3, P(OPh)3 and for PCy3, P(NMe2)3(trans isomer only). The 183W chemical shift (obtained by indirect detection using 31P) is found to be related to the PR3 ligand parameters nu and theta (Tolman electronic factor and cone angle, respectively) for the cis isomers and to nu (but only poorly to theta) for the trans isomers. The 183W-31P spin coupling constant is also related, less clearly for P-C than for P-N and P-O bonded ligands, to nu. Chemical shifts are referenced to an absolute frequency Xi (183W) = 4.15 MHz, which is proposed as a calibration standard for 183W NMR. The structures of cis-[W(CO)4(PPh3)(PMe3)] and cis-[W(CO)4(PPh3){P(4-C6H4F)3}] are reported.     

Catalytic effect of sulfoxides on the fluxional motion of 2,9-dimethyl-1,10-phenanthroline in a platinum(II) complex: evaluation of steric and electronic contributions

Addition of external weak nucleophiles to a chloroform solution of the cationic complex ion [Pt(Me)(dmphen)(PPh(3))](+) (1) accelerates the fluxional motion of the symmetric chelating ligand 2,9-dimethyl-1,10-phenanthroline (dmphen) between nonequivalent exchanging sites. The rates of the dynamic process can be measured by line-shape analysis of the (1)H NMR spectra. Concentration-dependent measurements were carried out with the ligands SOMe(2), SO(CH(2))(4), SO(n-Bu)(2), SO(sec-Bu)(2), SO(i-Pr)(2), SOEt(Ph), SOPr(Ph), SO(Bz)(2), SO(p-MeC(6)H(4))(2), SOPh(2), SO(p-ClC(6)H(4))(2), SOMe(p-MeOC(6)H(4)), SOMe(p-MeC(6)H(4)), SOMe(Ph), SOMe(p-BrC(6)H(4)), and SOMe(p-ClC(6)H(4)). The rate constants k(obsd), when plotted against the concentration of the added ligands SOR(R'), give a family of straight lines with a common intercept, indicating that the two-term rate law k(obsd) = k(1) + k(2)[SOR(R')] is obeyed. The same rate law applies to the displacement of SOMe(2) from [Pt(Me)(phen)(SOMe(2))](+) (2) (phen = 1,10-phenanthroline) by sulfoxides (SOMe(2), SO(i-Pr)(2), SOMe(p-MeOC(6)H(4)), SO(p-MeC(6)H(4))(2), SOPh(2), SO(p-ClC(6)H(4))(2), and SO(sec-Bu)(2)). The fluxional rates in 1 are 6-7 orders of magnitude higher than the substitution rates in 2. The values of the rate constants for the two processes were resolved quantitatively into steric and electronic contributions by use of quantitative analysis of ligand effects (QALE). Inhibitory steric effects are linearly operative for the entire set of ligands, the rates of the reactions are enhanced with increasing electron donor capacity of the sulfoxides, and there is a small but significant E(ar) effect that enhances the reactivity of the aryl sulfoxides. The strict similarity of the patterns of the two processes and of their dependence upon the stereoelectronic properties of the ligands, combined with the intrinsic lability of the platinum-nitrogen bonds, would suggest the operation of stereospecific consecutive ring-opening and ring-closure steps for the fluxional motion of dmphen in 1. However, the available evidence does not allow alternative mechanisms involving intramolecular rearrangements of the five-coordinate intermediate to be ruled out.     

Mixed phosphine and group-13 metal ligator complexes [(PR3)(a)M(ECp*)b] (M = Mo, Ni; E = Ga, Al; R = C6H5, cyclo-C6H11, CH3)

Treatment of [Mo(N(2))(PMe(3))(5)] with two equivalents GaCp* (Cp* = η(5)-C(5)(CH(3))(5)) leads to the formation of cis-[Mo(GaCp*)(2)(PMe(3))(4)] (1), while AlCp* did not react with this precursor. In addition, [Ni(GaCp*)(2)(PPh(3))(2)] (2a), [Ni(AlCp*)(2)(PPh(3))(2)] (2b), [Ni(GaCp*)(2)(PCy(3))(2)] (3a), [Ni(GaCp*)(2)(PMe(3))(2)] (3b), [Ni(GaCp*)(3)(PCy(3))] (4) and [Ni(GaCp*)(PMe(3))(3)] (5) have been prepared in high yields by a direct synthesis from [Ni(COD)(2)] and stoichiometric amounts of the ligands PR(3) and ECp* (E = Al, Ga), respectively. All compounds have been fully characterized by (1)H, (13)C, and (31)P NMR spectroscopy, elemental analysis and single crystal X-ray diffraction studies.     

Coordinatively unsaturated W(IV)-bis(pyridine) complexes, a reactive source of W(IV)

Addition of 2 equiv of a sigma-donor ligand (L = pyridine, 4-picoline, or quinoline) to complexes of the type [W(NPh)(eta(4)-arene)(o-(Me3SiN)2C6H4)] (arene = CH3CH2C6H5 (3), CH3CH2CH2C6H5 (4)) gave the W(IV)L2 compounds, [W(NPh)(o-(Me3SiN)2C6H4)(C5H5N)2] (5), [W(NPh)(o-(Me3SiN)2C6H4)(p-C6H7N)2] (6), and [W(NPh)(o-(Me3SiN)2C6H4)(C9H7N)2] (7). Synthesis of compounds 5 and 6 by Na degrees reduction of [W(NPh)(o-(Me3SiN)2C6H4)Cl2] in the presence of 3 equiv of L (L = 5, pyridine or 6, 4-picoline) is also presented. Compounds 5, 6, and 7 display hindered rotation of the donor ligands about the W-N bonds, resulting from a steric interaction with the Me3Si groups of the diamide ligand. The coordinative unsaturation of 5 and 6 has also been explored. Compounds 5 and 6 readily react with either CO and PMe3 to generated the six coordinate complexes [W(NPh)(o-(Me3SiN)2C6H4)(C5H5N)2(CO)] (8a), [W(NPh)(o-(Me3SiN)2C6H4)(C6H7N)2(CO)] (8b), [W(NPh)(o-(Me3SiN)2C6H4)(C5H5N)(PMe3)2] (10a), and [W(NPh)(o-(Me3SiN)2C6H4)(C6H7N)(PMe3)2] (10b), respectively.     

CO-migration in the ligand substitution process of the chelating diphosphite diiron complex (mu-pdt)[Fe(CO)3][Fe(CO){(EtO)2PN(Me)P(OEt)2}

Selective synthetic routes to isomeric diiron dithiolate complexes containing the (EtO) 2PN(Me)P(OEt) 2 (PNP) ligand in an unsymmetrical chelating role, for example, (mu-pdt)[Fe(CO) 3][Fe(CO)(kappa (2)-PNP)] ( 3) and as a symmetrically bridging ligand in (mu-pdt)(mu-PNP)[Fe(CO) 2] 2 ( 4), have been developed. 3 was converted to 4 in 75% yield after extensive reflux in toluene. The reactions of 3 with PMe 3 and P(OEt) 3 afforded bis-monodentate P-donor complexes (mu-pdt)[Fe(CO) 2PR 3][Fe(CO) 2(PNP)] (PR 3 = PMe 3, 5; P(OEt) 3, 7), respectively, which are formed via an associative PMe 3 coordination reaction followed by an intramolecular CO-migration process from the Fe(CO) 3 to the Fe(CO)(PNP) unit with concomitant opening of the Fe-PNP chelate ring. The PNP-monodentate complexes 5 and 7 were converted to a trisubstituted diiron complex (mu-pdt)(mu-PNP)[Fe(CO)PR 3][Fe(CO) 2] (PR 3 = PMe 3, 6; P(OEt) 3, 8) on release of 1 equiv CO when refluxing in toluene. Variable-temperature (31)P NMR spectra show that trisubstituted diiron complexes each exist as two configuration isomers in solution. All diiron dithiolate complexes obtained were characterized by MS, IR, NMR spectroscopy, elemental analysis, and X-ray diffraction studies.     

Rearrangements of phosphinoimines to phosphine-imines in ruthenium chelate complexes

Thermal reaction of 1:1 mixtures of the RuCl(2)(PPh(3))(3) and phosphinoimine R(2)PN=CPh(2) (R = Ph, iPr, Me) at 140 °C results in isolation of the dimeric species [RuCl(μ-Cl)(PPh(3))(C(6)H(4)(PPh(2))C(Ph)NH)](2) (R = Ph 1, iPr 2, Me 3) containing phosphine-imine chelating ligands. Subsequent reaction of 1 and 3 with one equivalent of pyridine at room temperature give RuCl(2)(PPh(3))(py)(C(6)H(4)(PR(2))C(Ph)NH) (R = Ph 4, Me 5). Excess pyridine reacts with 2 to give a mixture of the cis and trans-isomers of RuCl(2)(py)(2)(C(6)H(4)(PiPr(2))C(Ph)NH) 6 and 7 respectively. Treatment of 5 with excess PPh(3) affords RuCl(2)(PPh(3))(2)(C(6)H(4)(PMe(2))C(Ph)NH) 8. Aspects of the mechanism of the thermal rearrangements of the phosphinoimine to the phosphine-imine ligands are considered and the isolation of RuCl(2)(Ph(2)PN=CPh(2))(SIMes)(CHPh) 9 and RuCl(2)(PPh(3))(2)(HN=C(Ph)C(6)H(4)) 10 provide support for a proposed mechanism involving a intermediate containing a Ru-bound metallated aryl-imine fragment.     

Bimetallic carbonyl thiolates as functional models for Fe-only hydrogenases

The anion [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3))](-) (2(-)) is protonated by sulfuric or toluenesulfonic acid to give HFe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3)) (2H), the structure of which has the hydride bridging the Fe atoms with the PMe(3) and CN(-) trans to the same sulfur atom. (1)H, (13)C, and (31)P NMR spectroscopy revealed that HFe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3)) is stereochemically rigid on the NMR time scale with four inequivalent carbonyl ligands. Treatment of 2(-) with (Me(3)O)BF(4) gave Fe(2)(S(2)C(3)H(6))(CNMe)(CO)(4)(PMe(3)) (2Me). The Et(4)NCN-induced reaction of Fe(2)(S(2)C(3)H(6))(CO)(6) with P(OMe)(3) gave [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)[P(OMe)(3)]](-) (4). Spectroscopic and electrochemical measurements indicate that 2H can be further protonated at nitrogen to give [HFe(2)(S(2)C(3)H(6))(CNH)(CO)(4)(PMe(3))](+) (2H(2)(+)). Electrochemical and analytical data show that reduction of 2H(2)(+) gives H(2) and 2(-). Parallel electrochemical studies on [HFe(2)(S(2)C(3)H(6))(CO)(4)(PMe(3))(2)](+) (3H(+)) in acidic solutions led also to catalytic proton reduction. The 3H(+)/3H couple is reversible, whereas the 2H(2)(+)/2H(2) couple is not, because of the efficiency of the latter as a proton reduction catalyst. Proton reduction is proposed to involve protonation of reduced diiron hydrides. DFT calculations establish that the regiochemistry of protonation is subtly dependent on the coligands but is more favorable to occur at the Fe-Fe bond for [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3))](-) than for [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PH(3))](-) or [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)[P(OMe)(3)]](-). The Fe(2)H unit stabilizes the conformer with eclipsed CN and PMe(3) because of an attractive electrostatic interaction between these ligands.     

Dihydrogen activation by a diruthenium analogue of the Fe-only hydrogenase active site

The photochemical reaction of Ru2(S2C3H6)(CO)4(PCy3)2 (1) and H2 gives the dihydride Ru2(S2C3H6)(mu-H)(H)(CO)3(PCy3)2 (2). NMR and crystallographic studies reveal mutually trans basal phosphine ligands and both bridging and terminal hydrides. Ru2(S2C2H4)(CO)4(PCy3)2 behaves similarly. Other HX substrates undergo photoaddition to 1, affording Ru2(S2C3H6)(mu-H)(X)(CO)3(PCy3)2 for X = OTs (3a), Cl (3b), and SPh (3c). Treatment of Ru2(S2C3H6)(mu-H)(H)(CO)3(PCy3)2 with [H(OEt2)]BArF4 (ArF = B(C6H3-3,5-(CF3)2) in CD2Cl2 gives [Ru2(S2C3H6)(mu-H)(CO)3(PCy3)2(H2)]+ (4), which catalyzes H2-D2 exchange. The reaction of 2 with [D(OEt2)]BArF4 gave [Ru2(S2C3H6)(mu-H)(CO)3(PCy3)2(HD)]+ (JH-D = 31 Hz). These studies provide the first models for the Fe-only hydrogenases that bear dihydrogen and terminal hydrido ligands.     

Synthesis and structure of cyclic phosphate, phosphoramidate, phosphonates, and phosphonium salts. Phosphatrane formation

Reaction of tris(2-hydroxy-3,5-dimethylbenzyl)amine (6) with phosphorus reagents led to the formation of the phosphoramidate, N[CH2(Me2C6H2)O]2PO (1), the phosphate N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OH]P(O)(OPh) (2), the phosphonium salts N[CH2(Me2C6H2)O]3PMe+I- (3A) and N[CH2(Me2C6H2)O]3PMe+I3- (3B), and the phosphonates N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OH]P(O)Me (4) and N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OSiMe3]P(O)Me (5). X-ray analysis provided molecular structures for all of the compounds. The solid-state structural representations were supported in solution by an analysis of the NCH2 proton NMR patterns. The structures of 3A and 3B show the presence of phosphatranes with weak P-N donor interactions. These represent the first phosphatranes containing all six-membered rings. Variable temperature analysis of the 1H NMR spectra of 3A indicates fluxional behavior whereby a racemic mixture of the chiral phosphonium salt rapidly intraconverts at room temperature. The activation energy for the enantiomeric conversion of the clockwise and anticlockwise orientations of the propeller-like phosphatrane is 11.2 kcal/mol, which is compared to that of the isoelectronic silatrane N[CH2(Me2C6H2)O]3SiMe (E), 10.3 kcal/mol.     

Catalytic P--H activation by Ti and Zr catalysts

Catalytic dehydrocoupling of phosphines was investigated using the anionic zirconocene trihydride salts [Cp*2Zr(mu-H)3Li]3 (1 a) or [Cp*2Zr(mu-H)3K(thf)4] (1 b), and the metallocycles [CpTi(NPtBu3)(CH2)4] (6) and [Cp*M(NPtBu3)(CH2)4] (M=Ti 20, Zr 21) as catalyst precursors. Dehydrocoupling of primary phosphines RPH2 (R=Ph, C6H2Me3, Cy, C10H7) gave both dehydrocoupled dimers RP(H)P(H)R or cyclic oligophosphines (RP)n (n=4, 5) while reaction of tBu3C6H2PH2 gave the phosphaindoline tBu2(Me2CCH2)C6H2PH 9. Stoichiometric reactions of these catalyst precursors with primary phosphines afforded [Cp*2Zr((PR)2)H][K(thf)4] (R=Ph 2, Cy 3, C6H2Me3 4), [Cp*2Zr((PPh)3)H][K(thf)4] (5), [CpTi(NPtBu3)(PPh)3] (7) and [CpTi(NPtBu3)(mu-PHPh)]2 (8), while reaction of 6 with (C6H2tBu3)PH2 in the presence of PMe3 afforded [CpTi(NPtBu3)(PMe3)(P(C6H2tBu3)] (10). The secondary phosphines Ph2PH and (PhHPCH2)2CH2 also undergo dehydrocoupling affording (Ph2P)2 and (PhPCH2)2CH2. The bisphosphines (CH2PH2)2 and C6H4(PH2)2 are dehydrocoupled to give (PCH2CH2PH)2)(12) and (C6H4P(PH))2 (13) while prolonged reaction of 13 gave (C6H4P2)(8) (14). The analogous bisphosphine Me2C6H4(PH)2 (17) was prepared and dehydrocoupling catalysis afforded (Me2C6H2P(PH))2 (18) and subsequently [(Me2C6H2P2)2(mu-Me2C6H2P2)]2 (19). Stoichiometric reactions with these bisphosphines gave [Cp*2Zr(H)(PH)2C6-H4][Li(thf)4] (22), [CpTi(NPtBu3)(PH)2C6H4]2 (23) and [Cp*Ti(NPtBu3)(PH)2C6H4] (24). Mechanistic implications are discussed.     

Hydrogen-deuterium exchange between TpRu(PMe3)(L)X (L = PMe3 and X = OH, OPh, Me, Ph, or NHPh; L = NCMe and X = Ph) and deuterated arene solvents: evidence for metal-mediated processes

At elevated temperatures (90-130 degrees C), complexes of the type TpRu(PMe3)2X (X = OH, OPh, Me, Ph, or NHPh; Tp = hydridotris(pyrazolyl)borate) undergo regioselective hydrogen-deuterium (H/D) exchange with deuterated arenes. For X = OH or NHPh, H/D exchange occurs at hydroxide and anilido ligands, respectively. For X = OH, OPh, Me, Ph, or NHPh, isotopic exchange occurs at the Tp 4-positions with only minimal deuterium incorporation at the Tp 3- or 5-positions or PMe3 ligands. For TpRu(PMe3)(NCMe)Ph, the H/D exchange occurs at 60 degrees C at all three Tp positions and the phenyl ring. TpRu(PMe3)2Cl, TpRu(PMe3)2OTf (OTf = trifluoromethanesulfonate), and TpRu(PMe3)2SH do not initiate H/D exchange in C6D6 after extended periods of time at elevated temperatures. Mechanistic studies indicate that the likely pathway for the H/D exchange involves ligand dissociation (PMe3 or NCMe), Ru-mediated activation of an aromatic C-D bond, and deuteration of basic nondative ligand (hydroxide or anilido) or Tp positions via net D+ transfer.     

Insertion reactions of hydridonitrosyltetrakis(trimethylphosphine) tungsten(0)

[W(H)(NO)(PMe3)4] (1) was prepared by the reaction of [W(Cl)(NO)(PMe3)4] with NaBH4 in the presence of PMe3. The insertion of acetophenone, benzophenone and acetone into the W-H bond of 1 afforded the corresponding alkoxide complexes [W(NO)(PMe3)4(OCHR1R2)](R1 = R2 = Me (2); R1 = Me, R2 = Ph (3); R1 = R2 = Ph (4)), which were however thermally unstable. Insertion of CO2 into the W-H bond of yields the formato-O complex trans-W(NO)(OCHO)(PMe3)4 (5). Reaction of trans-W(NO)(H)(PMe3)4 with CO led to the formation of mer-W(CO)(NO)(H)(PMe3)3 (6) and not the formyl complex W(NO)(CHO)(PMe3)4. Insertion of Fe(CO)(5), Re2(CO)10 and Mn2(CO)10 into trans-W(NO)(H)(PMe3)4 resulted in the formation of trans-W(NO)(PMe3)4(mu-OCH)Fe(CO)4 (7), trans-W(NO)(PMe3)4(mu-OCH)Re2(CO)9 (8) and trans-W(NO)(PMe3)4(mu-OCH)Mn2(CO)9 (9). For Re2(CO)10, an equilibrium was established and the thermodynamic data of the equilibrium reaction have been determined by a variable-temperature NMR experiments (K(298K)= 104 L mol(-1), DeltaH=-37 kJ mol(-1), DeltaS =-86 J K(-1) mol(-1)). Both compounds 7 and 8 were separated in analytically pure form. Complex 9 decomposed slowly into some yet unidentified compounds at room temperature. Insertion of imines into the W-H bond of 1 was also additionally studied. For the reactions of the imines PhCH=NPh, Ph(Me)C=NPh, C6H5CH=NCH2C6H5, and (C6H5)2C=NH with only decomposition products were observed. However, the insertion of C10H7N=CHC6H5 into the W-H bond of led to loss of one PMe3 ligand and at the same time a strong agostic interaction (C17-H...W), which was followed by an oxidative addition of the C-H bond to the tungsten center giving the complex [W(NO)(H)(PMe3)3(C10H6NCH2Ph)] (10). The structures of compounds 1, 4, 7, 8 and 10 were studied by single-crystal X-ray diffraction.     

The synthesis and reactivity of a molybdenum (IV) stretched-dihydrogen complex

Reaction of [Mo(NPh)(PMe3)3(o-(Me3SiN)2C6H4)] (1) with molecular hydrogen (ca. 1 atm) at -10 degrees C in toluene-d8 results in the formation of dihydrogen complex [Mo(NPh)(PMe3)2(H2)(o-(Me3SiN)2C6H4)] (2) by 1H and 31P NMR spectroscopy. In solution at -50 degrees C 1 and 2 are present in a 1:3 ratio, respectively. The nature of dihydrogen ligand bonding in 2 was probed by T1 analysis and analysis of the JH-D coupling constant in the deuterium hydride isotopomer of 2 giving H-H distances of 1.18 A and 1.17 A, respectively. When allowed to warm to 30 degrees C, 2 reacts affording [Mo(NPh)(PMe3)3(o-(Me3SiN)(NH)C6H4)] (3) over a 1 h period. The X-ray structures of 1 and 3 are reported.     

Synthesis, structure and DFT study of dinuclear iron, cobalt and nickel complexes with cyclopentadienyl-metal moieties

Reactions of 1,1'-bis(dipheny1phosphino)cobaltocene with Co(PMe(3))(4), Ni(PMe(3))(4), Fe(PMe(3))(4), Ni(COD)(2), FeMe(2)(PMe(3))(4) or NiMe(2)(PMe(3))(3) afford a series of novel dinuclear complexes [((Me(3)P)[lower bond 1 start]Co(η(5)-C(5)H(4)[upper bond 1 start]PPh(2)))((Me(3)P)M[upper bond 1 end](η(5)-C(5)H(4)P[lower bond 1 end]Ph(2)))] (M = Co(1), Ni(2) and Fe(3)) [Co(η(5)-C(5)H(4)[upper bond 1 start]PPh(2))(2)Ni[upper bond 1 end](COD)](4), [Co(η(5)-C(5)H(4)[upper bond 1 start]PPh(2))(2)Ni[upper bond 1 end](PMe(3))(2)] (5) and [((Me(3)P)[lower bond 1 start]Co(Me)(η(5)-C(5)H(4)[upper bond 1 start]PPh(2)))((Me(3)P)Fe[upper bond 1 end](Me)(η(5)-C(5)H(4)P[lower bond 1 end]Ph(2)))] (6). Reactions of 1,1'-bis(dipheny1phosphino)ferrocene with Ni(PMe(3))(4), NiMe(2)(PMe(3))(3), or Co(PMe(3))(4) gives rise to complexes [Fe(η(5)-C(5)H(4)[upper bond 1 start]PPh(2))(2)M[upper bond 1 end](PMe(3))(2)] (M = Ni (7), Co (8)). The complexes 1-8 were spectroscopically investigated and studied by X-ray single crystal diffraction. The possible reaction mechanisms and structural characteristics are discussed. Density functional theory (DFT) calculations strongly support the deductions.     

Step-by-step uncoordination of the pyrazolyl rings of hydrotris(pyrazolyl)borate ligands in comlexes of Rh and RhIII

Compounds of rhodium(I) and rhodium(III) that contain ancillary hydrotris(pyrazolyl)borate ligands (Tp') react with monodentate and bidentate tertiary phosphanes in a step-wise manner, with incorporation of P-donor atoms and concomitant replacement of the Tp' pyrazolyl rings. Accordingly, [Rh(kappa3-TpMe2)(C2H4)(PMe3)] (1b), converts initially into [Rh(kappa2-TpMe2)-(PMe3)2] (3), and then into [Rh(kappa1-TpMe2)-(PMe3)3] (2) upon interaction with PMe3 at room temperature, in a process which can be readily reversed under appropriate experimental conditions. Full disengagement of the Tp' ligand is feasible to give Tp' salts of rhodium(I) complex cations, for example, [Rh(CO)(dppp)2]-[TpMe2,4-Cl] (5; dppp = Ph2P(CH2)3PPh2), or [Rh(dppp)2][TpMe2,4-Cl] (6). Bis(hydride) derivatives of rhodium(III) exhibit similar substitution chemistry, for instance, the neutral complex [Rh(Tp)-(H)2(PMe3)] reacts at 20 degrees C with an excess of PMe3 to give [Rh(H)2-(PMe3)4][Tp] (9b). Single-crystal X-ray studies of 9b, conducted at 143 K, demonstrate the absence of bonding interactions between the [Rh(H)2(PMe3)4]+ and Tp ions, the closest Rh...N contact being at 4.627 A.