光致变色WO3/4,4'-BPPOBp超晶格薄膜的制备

具有光致变色和电致变色特性的三氧化钨薄膜因其巨大的应用前景而倍受人们关注[1-4].其制备方法一般为物理沉积方法和化学沉积方法等.其中化学方法包括喷射裂解法[5],化学气相沉积法[6,7],电化学沉积法[8]和溶胶凝胶法[9]等.利用超分子化学自组装技术构建用有机组分调控的光致变色纳米超晶格薄膜材料,是研制光致变色功能薄膜材料的新方法.本文采用溶液中相反电荷聚电解质超分子自组装的方法(ＰＥｓ法)[10],制备了ＷＯ3/4,4′ＢＰＰＯＢｐ超晶格薄膜.采用紫外可见吸收光谱和小角Ｘ射线衍射谱对薄膜的结构和分子的排列方式进行了研究.1　实验…     

盘状多酸P_5W_(30)/阳离子聚电解质/氧化石墨烯杂化多层膜的电致变色性能

为了提高薄膜[PEI/P_5W_(30)]_(30)的电致变色性能,将具有大的二维尺寸和良好导电性的氧化石墨烯引入该薄膜中。通过层层自组装(LBL)技术构筑了基于盘状多酸K12.5Nal.5[Na P_5W_(30)O_(110)]·15H_2O(P_5W_(30))、氧化石墨烯(GO)的复合薄膜[PEI/P_5W_(30)/PEI/GO]_(30)(PEI:聚乙烯亚胺),并利用UV-Vis光谱对薄膜的组成及增长进行监测;通过原子力显微镜对薄膜的表面形貌进行考察,利用循环伏安法对薄膜电化学氧化还原性质进行研究;薄膜在外加氧化还原电位下呈现出无色/蓝色的可逆变化,电致变色响应时间在10 s以内;此外,薄膜在阶跃电位0.75 V/-0.75 V下循环150次,电致变色性能没有明显减弱,体现了薄膜良好的电致变色可逆性。氧化石墨烯的引入使薄膜[PEI/P_5W_(30)/PEI/GO]_(30)呈现出响应速度快、抗电疲劳强的电致变色性能,将在电致变色器件领域有广阔的应用前景。     

MoO_3电致变色薄膜的XPS研究

近年来 ,随着人们提倡节能和使用洁净能源 ,无机电致变色材料在建筑物采光控制系统和反射率可调表面的应用研究 ,已成为材料领域的一个新热点 .WO3、 MoO3等过渡金属氧化物薄膜具有良好的电致变色效应 ,是人们研究的重点 .其中 MoO3的电致变色效果要好于 IrO2、 TiOx、 CoO及 NiOx等电致变色材料 [1],而且它在可见光区有比 WO3更柔和的色彩 ,使人眼更易于适应其颜色变化 .着色态的 MoO3称为钼青铜 ,其开路记忆也好于钨青铜 [2].故 MoO3电致变色薄膜是极有潜力用于实用化的电致变色器件 .MoO3薄膜常用的制备方法有真空蒸 发、化学气…     

获得高性能电致变色薄膜的ITO表面修饰方法

氧化铟锡玻璃(ITO)以其优良的导电性能和透过率以及相对低的反应活性使其在显示器和电致变色器件中有广泛的应用. 然而, ITO表面的金属氧化物基团也带来了一些问题, 如通过物理方法沉积的电致变色薄膜易从ITO基底上脱离, 从而降低器件寿命, 此种问题在使用液体电解质时显得尤为突出. 为此, 我们利用有机酸小分子对ITO基底表面进行修饰, 继而利用电化学沉积的方法制备聚3,4-(2,2-二甲基丙烯二氧基)噻吩电致变色薄膜. XPS结果表明基底与修饰物间以化学键结合, 超声波处理可以看出电致变色薄膜在修饰后的基底上有更好的稳定性. 本研究提供了一种简单易行的方法来获得高性能的高分子电致变色薄膜.     

SiO_2@PANI光子晶体的制备及电致变色性能研究

应用Stber法合成单分散SiO2微球,通过垂直沉积自组装光子晶体,由电化学法在所组装的SiO2微球表面生成聚苯胺(PANI),得到了核-壳结构SiO2@PANI光子晶体薄膜.测试了SiO2@PANI光子晶体薄膜的循环伏安曲线、多电位紫外吸收光谱、对比度、响应时间等电致变色性能,结果表明,该光子晶体薄膜在变色时颜色亮丽,其最大对比度可达77%,远高于单纯PANI薄膜的43%,同时响应时间变快.初步实验结果说明将光子晶体结构引入导电聚合物中,能够提高其电致变色性能.     

磷钨酸盐修饰的氧化钨薄膜的制备与电致变色性质研究

为了提高WO_3纳米粒子薄膜的光学对比度,利用层接层自组装方法,将Keggin型结构的磷钨酸盐H_3[α-PW_(12)O_(40)]与WO_3纳米粒子复合,制备[PEI/PW_(12)/PEI/WO_3]_(20)复合膜.采用扫描电镜、紫外光谱和电化学工作站对复合膜的形貌及电致变色性能进行研究,结果表明:该复合膜与单纯的WO_3纳米粒子薄膜相比,光学对比度提高了117.28%,且这种复合膜提供了较大的H~+扩散系数,可以获得更好的电致变色性能.     

Ag/WO3纳米复合膜的制备及其电致变色性质和器件的研究

通过真空镀膜方法制备的纳米Ag薄膜均匀致密, 表面光滑. 然后通过电化学方法在Ag纳米薄膜上沉积一层三氧化钨(WO3), 制备纳米Ag/WO3复合膜. 并在此基础上构筑五层式玻璃/ITO/纳米Ag-WO3复合膜/固态电解质/聚(3-甲基噻吩)/ITO/玻璃电致变色器件. 实验结果表明, 与传统的WO3膜相比, 纳米Ag/WO3复合膜具有更好的电化学活性、更高的对比度、更短的响应时间, 以及更好的稳定性. 由该复合膜组装的电致变色器件工艺简单, 电致变色性能良好.     

钒钨酸盐/刚果红电致变色复合膜及器件研究

应用Layer-by-Layer自组装技术,采用聚乙烯亚胺(PEI)阳离子将无机电致变色材料[P2W15V3O62]8-(P2W15V3)阴离子与刚果红(CR)阴离子通过静电引力复合,构筑了复合膜[PEI/P2W15V3/PEI/CR]20及对比膜[PEI/P2W15V3]20.利用扫描电子显微镜、紫外-可见吸收光谱和电化学工作站研究了复合膜的形貌与电致变色性能.对比研究表明,复合膜可实现浅红色-蓝紫色-浅红色的可逆颜色调变,且保持了[P2W15V3O62]8-阴离子的电致变色性能,光反差22.55%,着色效率122.67 cm2/C.复合膜循环测试400圈后透过率(500 nm)处损耗仅为6.94%,稳定性良好;由复合膜组装的电致变色器件也实现了由浅红色到蓝紫色的颜色变化.本研究可为解决多酸电致变色材料颜色变化单一的问题提供参考.     

WO3纳米管的模板法制备及表征

0引言 WO3纳米材料具有光致变色、电致变色、气致变色等特性,可用于光学信息和储存显示器、pH值探测器、气敏传感器、灵敏窗口等[1,2];并且在太阳能的储存与利用、光电转换、光催化降解大气和水中的污染物等方面有着广阔的应用前景[3,4],成为近几年重点研究的半导体材料之一.以前纳米WO3的制备主要集中在薄膜上,其薄膜的制备工艺已经相当成熟,主要包括蒸发法、溅射法、CVD法、喷涂法、阳极氧化法、溶胶-凝胶法等[3].     

热处理对SILAR法制备CuInSe_2薄膜性能的影响

0引言铜铟硒(CIS)具有合适的带隙、高光吸收系数、适当的电荷密度和迁移率,是一种用于薄膜太阳能电池的备受关注的吸收材料[1]。目前CuInSe2薄膜已采用多种方法进行制备,如金属前驱体硒化法[2]、共沉积法[3]、溅射法[4]、电沉积法[5]和化学气相沉积法[6]等。这些方法都有各自的     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.