Cr掺杂ZnS纳米管结构和磁性质

采用第一性原理密度泛函理论系统研究Cr原子单掺杂和双掺杂单壁ZnS纳米管的结构和磁性质.研究发现掺杂纳米管的形成能比纯纳米管的形成能低,说明掺杂过程是放热的.单掺杂纳米管的总磁矩主要来自Cr原子3d态的贡献.结果表明Cr原子掺杂单壁ZnS纳米管趋向于铁磁态.但铁磁态和反铁磁态的能量差仅为0.036 eV.为获得室温铁磁性,我们用一个C原子替代掺杂体系中的一个S原子.计算发现铁磁态的能量比反铁磁态低0.497eV.表明此掺杂体系可能获得室温铁磁性.     

Cr掺杂ZnS纳米管结构和磁性质（英文）

采用第一性原理密度泛函理论系统研究Cr原子单掺杂和双掺杂单壁Zn S纳米管的结构和磁性质.研究发现掺杂纳米管的形成能比纯纳米管的形成能低,说明掺杂过程是放热的.单掺杂纳米管的总磁矩主要来自Cr原子3d态的贡献.结果表明Cr原子掺杂单壁Zn S纳米管趋向于铁磁态.但铁磁态和反铁磁态的能量差仅为0.036 e V.为获得室温铁磁性,我们用一个C原子替代掺杂体系中的一个S原子.计算发现铁磁态的能量比反铁磁态低0.497e V.表明此掺杂体系可能获得室温铁磁性.     

Mn/C共掺杂ZnS纳米管磁性质研究

采用第一性原理密度泛函理论系统地研究Mn原子单掺杂和双掺杂ZnS纳米管的结构、电子性质和磁性质.掺杂纳米管的形成能比纯纳米管形成能更低,表明掺杂是个放热过程.掺杂纳米管的能隙远小于纯纳米管能隙.计算结果表明Mn掺杂纳米管趋于反铁磁态.为了获得室温铁磁性,用一个C原子替代一个S原子.发现铁磁态能量比反铁磁态能量低0.454 eV.如此大的能量差表明这类材料中有可能获得室温铁磁性.     

Mn/C共掺杂ZnS纳米管磁性质研究（英文）

采用第一性原理密度泛函理论系统地研究Mn原子单掺杂和双掺杂ZnS纳米管的结构、电子性质和磁性质.掺杂纳米管的形成能比纯纳米管形成能更低,表明掺杂是个放热过程.掺杂纳米管的能隙远小于纯纳米管能隙.计算结果表明Mn掺杂纳米管趋于反铁磁态.为了获得室温铁磁性,用一个C原子替代一个S原子.发现铁磁态能量比反铁磁态能量低0.454 e V.如此大的能量差表明这类材料中有可能获得室温铁磁性.     

Cr掺杂ZnO纳米线电子性质和磁性质

本文采用第一性原理密度泛函理论系统的研究了Cr原子单掺杂和双掺杂两种尺寸ZnO纳米线的电子性质和磁性质.所有掺杂纳米线的形成能都比纯纳米线的形成能低,表明掺杂增强了纳米线的稳定性.研究发现Cr原子趋于替代纳米线表面的Zn原子.所有掺杂纳米线都显示了金属性.纳米线的总磁矩主要来源于Cr原子3d轨道的贡献.由于杂化,相邻的O原子和Zn原子也产生了少量自旋.在超原胞内,Cr和O原子磁矩反平行排列,表明它们之间是反铁磁耦合.表面双掺杂纳米线铁磁态能量比反铁磁态能量低149 meV,表明Cr掺杂ZnO纳米线可能获得室温铁磁性.     

钒掺杂硫化锌团簇稳定性和磁性质研究

本文采用密度泛函理论研究了V原子单掺杂和双掺杂(ZnS)12团簇的几何结构和能量稳定性.我们考虑了三种掺杂方式:替代掺杂,外掺杂和内掺杂.单掺杂时,替代掺杂团簇是最稳定结构,而对于双掺杂,外掺杂团簇是最稳定结构.团簇磁矩主要来自V-3d态的贡献,4s和4p态也贡献了一小部分磁矩.由于轨道杂化,相邻的Zn和S原子上也产生少量自旋.结果显示V原子间的磁性耦合是短程相互作用.相邻V原子之间的磁性耦合由直接的V-V反铁磁耦合和两个V和S原子之间通过p-d杂化产生的铁磁耦合这两中相互作用的竞争来决定.     

Mn掺杂ZnS(110)表面的电子结构和磁性

采用基于密度泛函理论的第-性原理方法,研究Mn掺杂ZnS(110)表面的电子结构和磁性.计算分析不同掺杂组态的几何参数、形成能、磁矩、电子态密度以及电荷密度.结果表明:单个Mn原子掺杂,替位于表面第二层的Zn原子时体系形成能最低,说明该层是最稳定的掺杂位置.对于两个Mn原子的掺杂,当Mn与Mn之间呈反铁磁耦合时体系最稳定.体系的总磁矩和自由Mn原子的磁矩差别很小,但是Mn原子的局域磁矩却依赖于Mn原子的3d态和近邻S原子的3p态的杂化作用,即受周围S原子环境的变化影响较大.此外,分析电荷密度图得出Mn原子替换Zn原子后与S原子形成了更强的共价键.     

钒掺杂硫化锌团簇稳定性和磁性质研究

本文采用密度泛函理论研究了V原子单掺杂和双掺杂(ZnS)12团簇的几何结构和能量稳定性。我们考虑了三种掺杂方式：替代掺杂,外掺杂和内掺杂。单掺杂时,替代掺杂团簇是最稳定结构,而对于双掺杂,外掺杂团簇是最稳定结构。团簇磁矩主要来自V-3d态的贡献,4s和4p态也贡献了一小部分磁矩。由于轨道杂化,相邻的Zn和S原子上也产生少量自旋。结果显示V原子间的磁性耦合是短程相互作用。相邻V原子之间的磁性耦合由直接的V-V反铁磁耦合和两个V和S原子之间通过p-d杂化产生的铁磁耦合这两中相互作用的竞争来决定。     

C掺杂ZnO纳米线的磁性研究

运用第一性原理方法研究了C掺杂ZnO纳米线的电子性质和磁性质.研究发现C原子趋于替代纳米线表面的O原子.所有掺杂纳米线显示了半导体特性.纳米线的总磁矩主要来源于C原子2p轨道的贡献.由于杂化,相邻的Zn原子和O原子也产生了少量自旋.在超原胞内,C、Zn和O原子磁矩平行排列,表明它们之间是铁磁耦合.铁磁态和反铁磁态的能量差达到了186meV,表明C掺杂ZnO纳米线可能存在室温铁磁性,在自旋电子学领域有很大应用前景.     

过渡金属掺杂氧化锌团簇的物性研究

本文采用第一性原理密度泛函理论研究了过渡金属（TM）原子Cr和Fe单掺杂和双掺杂(ZnO)12团簇的结构和磁性质。我们考虑了替代掺杂和间隙掺杂。结果表明Cr 和 Fe间隙掺杂团簇结构最稳定。团簇磁矩主要来自TM原子3d态的贡献,4s 和4p 态也贡献了一小部分磁矩。由于轨道杂化,相邻的Zn和O原子上也产生少量自旋。最近邻TM原子间的磁性耦合,主要由两个TM原子之间的直接短程铁磁耦合和TM和O原子之间通过p-d杂化产生的反铁磁耦合这两种相互作用的竞争来决定。不同TM原子掺杂团簇的总磁矩与TM原子种类以及掺杂位置有关,说明在(ZnO)12团簇中掺杂不同TM原子在可调磁矩的磁性材料的领域有潜在应用价值。     

First-principle study on magnetic properties of Mn/Fe codoped ZnS

We studied the magnetic properties of Mn/Fe codoped ZnS comparatively with and without defects using first-principle calculation. The calculated results indicate that the Mn/Fe codoped ZnS system tends to stabilize in a ferrimagnetic (FiM) configuration. To obtain a ferromagnetic (FM) configuration, we consider the doped system with defects, such as S or Zn vacancy. The calculated results indicate that the doped system with Zn vacancy favors FiM states. Although the FM states of the doped system with S vacancy are more stable than the FiM states in negative charge states, the FM states are not stable enough to exist. Finally, we replaced an S atom by a C atom in the doped system. The C atom prefers to substitute the S atom connecting Mn and Fe atoms. The formation energy of this defect is −0.40 eV, showing that Mn/Fe/C codoped ZnS can be fabricated easily by experiments. Furthermore, the FM state was lower in energy than the FiM state by 114 meV. Such a large energy difference between the FM and FiM states implies that room temperature ferromagnetism could be expected in such a system.     

First-principles study on the magnetic property of C-doped wurtzite ZnS

We have studied the structure, electronic and magnetic properties of wurtzite (WZ) ZnS semiconductor doped with one or two C atoms using first-principles calculations. The moderate formation energy implied that C-doped ZnS could be fabricated experimentally. The total magnetic moment of the 72 atom super cell was 2.02μB, mainly due to the 2p component of the C atom. Electronic structures showed ZnS doped with C atom was p-type half-metallic ferromagnetic (FM) semiconductor and hole mediation was responsible for the ferromagnetism. The large energy difference (154 meV) between the FM and antiferromagnetic (AFM) state implied room-temperature ferromagnetism for C-doped WZ ZnS, which has great potential in spintronic devices.     

硫化锌纳米管稳定性、电子性质和磁性质的比较研究

用第一性原理方法系统地研究硫化锌纳米管的稳定性、电子性质和掺杂磁性质.比较三种纳米管的稳定性.研究表明,六边形截面的双壁管的稳定性最高,相同截面的单壁管稳定性次之,而圆截面的之字形和扶手椅纳米管稳定性最低.电子能带结构计算表明它们都是直接带隙半导体.纳米管表面氢吸附后,六边形截面的单壁管转变为间接带隙半导体.研究了磁性原子掺杂六边形截面管的磁性质.发现掺杂纳米管的形成能比纯纳米管的形成能低,说明掺杂过程是一个放热反应.纳米管的总磁矩等于掺杂的磁性原子的磁矩.这些单掺杂纳米管在可调磁的新材料方面有潜在的应用价值.     

ZnS(111)表面掺杂Mn的电子结构和磁性的第一性原理研究

应用基于密度泛函理论的第一性原理,研究Mn原子掺杂在ZnS(111)表面的电子结构和磁性.对于单原子的掺杂组态,替位表面第一层的Zn原子时体系形成能最低,说明该层是最稳定的掺杂位置.体系总磁矩取决于Mn原子的局域环境.而对于双掺杂组态,当Mn与Mn之间呈短程铁磁耦合作用时体系最稳定.这可由Mn原子和近邻S原子的p-d杂化作用解释.此时,体系的居里温度估算值为469 K,明显高于室温,具有理论指导意义.Mn原子和受主半导体之间的相互作用是自旋极化产生的主要原因.计算结果表明,该掺杂材料可以很好的用来制作稀磁半导体,具有良好的应用前景.     

First-principles study on the magnetic properties of transition-metal atoms doped (ZnS)12 cluster

A first-principles density functional investigation has been performed to evaluate the structural, electronic, and magnetic properties of (ZnS)₁₂ doped with one or two transition-metal (TM) atoms (Fe, Co, and Ni). Substitutional- and interstitial-doping are considered. The substitutional isomers are found to be most favorable for Fe-doped clusters, while the interstitial isomers are found to be most favorable for Co- and Ni-doped clusters. Magnetic coupling between the TM atoms at the nearest neighbor position is mainly governed by the competition between direct ferromagnetic and antiferromagnetic interactions between two TM atoms via the S atom due to strong p-d hybridization. The coupling is short-ranged. Most importantly, we demonstrate that the Fe and Ni endohedral bi-doped (ZnS)₁₂ clusters favor the ferromagnetic state, which has potential applications in nanoscale quantum devices.     

Structure, electronic and magnetic properties of Cr-doped (ZnS)12 clusters: A first-principles study

We have studied the structural, electronic, and magnetic properties of (ZnS)₁₂ clusters doped with one (monodoped) and two (bidoped) Cr atoms in terms of a first-principles method. Substitutional, exohedral, and endohedral doping are considered. The substitutional isomer is found to be most favorable in energy for monodoped clusters, while the exohedral isomers are found to be most favorable for bidoped clusters. The magnetic coupling between the Cr atoms is mainly governed by the competition between direct Cr-Cr antiferromagnetic (AFM) interaction and the ferromagnetic (FM) interaction between two Cr atoms via S atom due to strong p-d hybridization. Finally, we show that the exohedral bidoped (ZnS)₁₂ clusters favor the FM state, which has potential applications in nanoscale quantum devices.     

Intrinsic ferromagnetism in insulating cobalt doped anatase TiO2

Using complementary experiments we show that the room temperature ferromagnetism observed in anatase Co:TiO(2) films is not carrier mediated, but coexists with the dielectric state. TEM and x-ray absorption spectroscopy reveal a solid solution of Co in anatase, where Co is not metallic but in the +2 state substituting for Ti. Measurements at 300 K yield a M(S) of 1.1 mu(B)/Co atom, while all films are highly insulating. The evidence of intrinsic ferromagnetism in the dielectric ground state of Co:TiO(2) leads to new considerations for the origin of ferromagnetism in transition metal doped oxides.