Magnetic behavior of MnAs precipitates in Ga1−xMnxAs diluted magnetic semiconductor

Ferromagnetic Ga_1−xMn_xAs layers (where x≈4.7–5.5%) were grown on (1 0 0) GaAs substrates by molecular beam epitaxy. These p-type (Ga,Mn)As films were revealed to have a ferromagnetic structure and ferromagnetism is observed up to a Curie temperature of 318 K, which is ascribed to the presence of MnAs secondary magnetic phases within the film. It is highly likely that the phase segregation occurs due to the high Mn cell temperature around 890–920 °C, as it is well established that GaMnAs is unstable at such a high temperature. The MnAs precipitate in the samples with x≈4.7–5.5% has a Curie temperature T_c≈318 K, which was characterized from field-cooled and zero-field-cooled magnetization curves.     

Characterization of the magnetic properties of a GdBa2Cu3O7/La0.75Sr0.25MnO3 superlattice using off-axis electron holography

Off-axis electron holography is used to characterize the magnetic properties of a GdBa₂Cu₃O₇/La_0.75Sr_0.25MnO₃ superlattice below the Curie temperature of the manganite layers, in both cross-sectional and plan-view geometry. The samples were prepared for electron microscopy using focused ion beam milling. Differences between the magnetic properties of successive manganite layers are observed in the cross-sectional sample. Magnetic ripple contrast and weakly magnetic regions are observed in plan-view geometry. Although the results may be affected by sample preparation for electron microscopy, the observed differences between the magnetic properties of the manganite layers are consistent between the different samples examined.     

Phase diagrams of a spin-1 Ising superlattice

The three-dimensional spin-1 Ising superlattice consisting of two different ferromagnetic materials with two different crystal fields _Δ1${\Delta }_1$ and _Δ2${\Delta }_2$ is considered in the mean field approximation. The phase diagrams are considered in the (t,_d2$t,d_2$) plane for different ranges of variation of _d1(t=T/J,_d1=_Δ1/J$d_1(t=T/J,d_1={\Delta }_1/J$, _d2=_Δ2/J$d_2={\Delta }_2/J$ are the reduced temperature and crystal fields respectively). The phase diagrams exhibit a variety of multicritical points and reentrant and double reentrant behaviours. They are found to depend qualitatively and/or quantitatively on the thicknesses of the materials in a supercell. This has direct consequences on the nature of the magnetic states of superlattices with different thicknesses.     

Magnetic properties of thick multiferroic hexagonal HoMnO3 films

Multiferroic hexagonal HoMnO₃/YSZ(1 1 1) films with a thickness of ?1 μm have been grown by pulsed laser deposition. Conventional X-ray diffraction and pole figure measurement indicate that the film is epitaxially grown without secondary phase or misorientation. Magnetization measurements reveal some differences in comparison with a single crystal. These differences are possibly related to the larger a and c lattice parameters of the film which are likely to alter the bond lengths and, thus, the magnetic superexchange interactions. A substantial change of the complex Ho³⁺ magnetic ordering below 6 K is observed.     

Third and fourth harmonic generation at Si-SiO2 interfaces and in Si-SiO2-Cr MOS structures

2 and Si(110)-SiO₂ interfaces and DC-electric-field induced TH and FH generation is then observed in Si(111)-SiO₂-Cr and Si(110)-SiO₂-Cr MOS structures for the first time. A systematic phenomenological analysis of azimuthal anisotropy of TH and FH generation intensity is performed for (111) and (110) surfaces of O_h symmetric single crystals. A phenomenological model of electro-induced effects in TH and FH generation is then developed and the surface specificity and sensitivity of TH and FH generation are discussed. Optical interference of surface electro-induced and bulk bias-independent contributions to the effective third-order nonlinear polarization is proposed as the mechanism underlying surface sensitivity of electro-modulated TH probe. Received: 16 October 1998     

Ferromagnetism of epitaxially grown CaRu1−xMxO3 (M=Ti, Mn) films

Epitaxial thin films of CaRu_1−xM_xO₃ (M=Ti, Mn) were fabricated on a (0 0 1)-SrTiO₃ substrate by spin-coat method using organometallic solutions (metal alkoxides). Results of X-ray diffraction and transmission electron microscopy indicate that the epitaxial films were grown pseudomorphically so as to align the [0 0 l] axis of the CaRu_1−xM_xO₃ films perpendicular to the (0 0 1) plane of the SrTiO₃ substrate. Ferromagnetism and metal-insulator transition are induced by the substitution of transition metal ions. The occurrence of ferromagnetism was explained qualitatively assuming a TiRu₆ cluster model for CaRu_1−xTi_xO₃ film and a mixed valence model for CaRu_1−xMn_xO₃ film. Ferromagnetism was also observed for layered CaRuO₃/CaMnO₃ film and CaRuO₃/CaMnO₃/CaRuO₃/CaMnO₃ multilayer film and the magnetism was explained by an interfacial exchange interaction model with magnetic Mn³⁺, Mn⁴⁺, and Ru⁵⁺ ions.     

Magnetic and structural properties of Fe ion-implanted GaN

The magnetic and structural properties of Fe ion-implanted GaN was investigated by various measurements. XRD results did not show any peaks associated with second phase formation. The magnetization curve at 5 K showed ferromagnetic behavior for 900 °C-annealed sample. In zero-field-cooled (ZFC) and field-cooled (FC) magnetization measurements, the irreversibility and a cusp-like behavior of the ZFC curve were observed for 900 °C-annealed sample. These behaviors are typically observed in superparamagnetic or spin glass phase. While the temperature dependence magnetization of 800 °C-annealed sample showed non-Brillouin-like curve and it is not exhibited ferromagnetic hysteresis at 5 K. In XPS measurement, the coexistence of metallic Fe (Fe⁰) and Fe–N bond (Fe²⁺ and Fe³⁺) for Fe 2p core level spectra is observed in as-implanted sample. But 700–900 °C-annealed samples showed only Fe–N bond (Fe²⁺ and Fe³⁺) spectra. For Ga 3d core level spectra only Ga–N bonds showed for as implanted with 700–900 °C-annealed samples. From XPS results, it could be explained that magnetic property of our films originated from FeN structures.     

The analytical treatment of magnetic properties of three-layer ferrimagnetic superlattice

The Hamiltonian of the magnetic superlattice with three-layer unit cell was treated within the Boson formalism. The Boson Green’s functions (BGFs) were derived and it was shown that the system for BGFs splits into two sets which lead to the energies with opposite signs, although the energies of elementary excitations are strictly only the positive ones. However, when corresponding energies are used, the correlation functions calculated from both sets are the same. All the physically relevant quantities: total energy of the system, ground state energy, layer magnetization and zero-point (quantum) fluctuations are derived analytically by using both sets, showing that they lead to the same expressions. The Hamiltonian was also diagonalized by the so-called “u-v” transformation of the operators. It is shown that in spite of formal independence of the approaches, there exists a close relationship between BGF and “u-v” transformations.     

Thickness dependence of the spin- and angle-resolved photoemission of ultrathin,epitaxial Ni(111)/W(110) layers

The thickness dependence of the magnetic band structure of ultrathin, epitaxial Ni(111)/W(110) layers has been studied by spin and angle-resolved photoemission spectroscopy. The changes of the spin-resolved photoemission intensities upon reducing the layer thickness depend strongly on the wavevector along the -L line of the Brillouin zone. The measured exchange splitting atk 1/3(-L) andk 1/2(-L) is found to be independent of the layer thickness for layers consisting of 3 or more atomic layers, while decreases rapidly with the layer thickness atk2/3(-L). This behavior is very similar to the temperature dependence of the spin-resolved photoemission spectra of bulk Ni(111) at the samek-points.     

Magnetic structures and magnetocrystalline anisotropy in bulk and thin film Fe3Pt

Magnetic structures and magnetocrystalline anisotropy (MCA) of tetragonal phase Fe₃Pt with an L1₂ atomic ordering in bulk and thin film are investigated by means of the first-principles full-potential linearized augmented plane-wave method. The results obtained predict that the tetragonal phase, in which the tetragonal distortion with (c/a) = 0.95 makes an asymmetry of magnetic properties along the c-axis (out-of-plane) and a-axis (in-plane), has an out-of-plane MCA. In addition, from the thin film calculations, the presence of surface is found to strongly enhance the out-of-plane MCA.     

Magnetic properties of field-annealed FeCo thin films

Fe₅₀Co₅₀ thin films with thickness of 30 and 4 nm have been produced by rf sputtering on glass substrates, and their surface has been observed with atomic force microscopy (AFM) and magnetic force microscopy (MFM); MFM images reveal a non-null component of the magnetization perpendicular to the film plane. Selected samples have been annealed in vacuum at temperatures of 300 and 350 °C for times between 20 and 120 min, under a static magnetic field of 100 Oe. DC hysteresis loops have been measured with an alternating gradient force magnetometer (AGFM) along the direction of the field applied during annealing and orthogonally to it. Samples with a thickness of 4 nm display lower coercive fields with respect to the 30 nm thick ones. Longer annealing times affect the development of a harder magnetic phase more oriented off the film plane. The field applied during annealing induces a moderate magnetic anisotropy only on 30 nm thick films.     

Magnetic properties of 3d transition metal monolayers on metal substrates

We report results of systematic calculations for magnetic properties of 3d transition metal monolayers on Pd(001) and Ag(001). We find large similarities to interactions of magnetic 3d impurities in the bulk. Therefore the overlayer results are supplemented with results for 3d dimers in Cu, Ag, and Pd. Differences between the two classes of systems are utilized to reveal the interaction within the overlayers and between overlayers and substrates. In virtually all cases we find both ferromagnetic and antiferromagnetic solutions, showing large magnetic moments and similar densities of states. From the trend of the calculations we conclude that V, Cr, and Mn overlayers favor the antiferromagnetic c(2×2) structure, while Ti, Fe, Co, and Ni prefer the ferromagnetic one.     

Magnetic properties and microstructure study of high coercivity Au/FePt/Au trilayer thin films

High-coercivity Au(60 nm)/FePt(δ nm)/Au(60 nm) trilayer samples were prepared by sputtering at room temperature, followed by post annealing at different temperatures. For the sample with δ=60 nm, L1₀ ordering transformation occurs at 500 °C. Coercivity (H_c) is increased with the annealing temperature in the studied range 400–800 °C. The H_c value of the trilayer films is also varied with thickness of FePt intermediate layer (δ), from 27 kOe for δ=60 nm to a maximum value of 33.5 kOe for δ=20 nm. X-ray diffraction data indicate that the diffusion of Au atoms into the FePt L1₀ lattice is negligible even after a high-temperature (800 °C) annealing process. Furthermore, ordering parameter is almost unchanged as δ is reduced from 60 to 15 nm. Transmission electron microscope (TEM) photos indicate that small FePt Ll₀ particles are dispersed amid the large-grained Au. We believe that the high coercivity of the trilayer sample is attributed to the small and uniform grain sizes of the highly ordered FePt particles which have perfect phase separation with Au matrix.     

The transverse ferromagnet spin-1 Ising model of alternating magnetic superlattice

Within the framework of the effective field theory with a probability distribution technique that accounts for the single-site spin correlations, we examine the critical behavior of the transverse ferromagnetic spin-1 Ising model of an alternating magnetic superlattice. The critical temperature of the alternating magnetic superlattice has been studied as a function of the interlayer and intralayer exchange interactions and the strength of the transverse field and the thickness of the finite superlattice. Received 12 January 2000 and Received in final form 14 September 2000     

Magnetic properties and structure of FePt/FeMn multilayers

A systematic study of the magnetic properties by ion beam sputter-deposition system, was conducted in conjunction with the structure of FePt/FeMn multilayers fabricated onto MgO(0 0 1) substrates. Both parallel and perpendicular exchange biases were observed in the multilayers and were found to decrease drastically, as the deposition temperature is higher than 350 °C, which is evidently due to the interdiffusion at the interface. The thickness dependence study shows that the perpendicular magnetic anisotropy observed in the multilayers originates from surface anisotropy, being consistent with the decrease of perpendicular magnetic anisotropy as the deposition temperature is increased. The difference between parallel and perpendicular blocking temperatures that was clearly observed, is possibly due to the spin canting out of plane at the interface.     

Microstructure and magnetic properties of FePt:Ag nanocomposite films on SiO2/Si(1 0 0)

FePt:Ag nanocomposite films were prepared by pulsed filtered vacuum arc deposition system and subsequent rapid thermal annealing on SiO₂/Si(1 0 0) substrates. The microstructure and magnetic properties were investigated. A strong dependence of coercivity and ordering of the face-central tetragonal structure on both Ag concentration and annealing temperature was observed. With Ag concentration of 22% in atomic ratio, the coercivity got to 6.0 kOe with a grain size of 6.7 nm when annealing temperature was 400 °C.     

Role of optical interference effects in the enhancement of magnetization-induced second-harmonic generation

Received: 14 October 1998     

Electromodulation of the magnetoresistance in diluted magnetic semiconductors based heterostructures

We study the properties of heterostructures formed by two layers of a diluted magnetic semiconductor separated by a nonmagnetic semiconductor layer. We find that there is a RKKY-type exchange coupling between the magnetic layers that oscillates between ferromagnetic and antiferromagnetic as a function of the different parameters in the problem. The different transport properties of these phases make that this heterostructure presents strong magnetoresistive effects. The coupling can be also modified by an electric field. We propose that it is possible to alter dramatically the electrical resistance of the heterostructure by applying an electric field. Our results indicate that in a single gated sample the magnetoresistance could be modulated by an electrical bias voltage.     

Magnetic structures of exchange bias Ni/FeF2(1 1 0) interface

Electronic and magnetic structures of ferromagnetic (FM)/antiferromagnetic (AFM), Ni/FeF₂(1 1 0), with a compensated AFM interface are investigated by using the full-potential linearized augmented plane-wave method. We find that magnetic structures at the AFM interface are perturbed by a contact with the FM material, where the superexchange interaction through the interface F excites and induces a small net moment at the AFM interface. These results predicted may play an important role for explaining the exchange bias in this system, and rule out the exchange bias mechanisms with the spin-flop coupling and the magnetic moment reorientation.     

Magnetic nanocomposite thin films of BaFe12O19 and TiO2 prepared by sol-gel method

The composite films with different weight ratio of barium ferrite to titanium dioxide are successfully prepared using sol-gel method for the first time. The morphology, crystal structure and magnetic properties of composite films are investigated with atomic force microscopy, X-ray diffraction and vibrating sample magnetometry. The results show that the composite films are uniform with no microcracks. The grain diameters are less than 100 nm. With the increase of barium ferrite, the grain diameter decreases. The composite films are composed of M-type hexagonal barium ferrite and rutile titanium dioxide. The composite films possess the excellent magnetic properties. The specific saturation magnetization and coercivity reach 18.3 emu/g and 3350 Oe, respectively. The application of composite films in magnetic recording and electromagnetic absorption fields is promising.