Influence of thermophoresis on heat and mass transfer under non-Darcy MHD mixed convection along a vertical flat plate embedded in a porous medium in the presence of radiation

The paper presents an investigation of the influence of thermophoresis on MHD mixed convective heat and mass transfer of a viscous, incompressible and electrically conducting fluid along a vertical flat plate with radiation effects. The plate is permeable and embedded in a porous medium. To describe the deviation from the Darcy model the Forchheimer flow model is used. The Rosseland approximation is used to describe the radiative heat flux in the energy equation. The governing partial differential equations are transformed into a system of ordinary differential equations using similarity transformation. The nonlinear ordinary differential equations are linearized by using quasilinearization technique and then solved numerically by using implicit finite difference scheme. The numerical results are analyzed for the effects of various physical parameters such as magnetic parameter Ha, mixed convection parameter Ra _d /Pe _d , Reynolds number Red, radiation parameter R, thermophoretic parameter τ, Prandtl number Pr, and Schmidt number Sc. The heat transfer coefficient is also tabulated for different values of physical parameters.     

Effect of heat generation on transient flow of micropolar fluid in a porous vertical channel

The present work is performed to study the effect of heat generation on fully developed flow and heat transfer of micropolar fluid between two parallel vertical plates. The rigid plates are assumed to exchange heat with an external fluid by convection. The governing equations are solved by using Crank–Nicolson implicit finite difference method. The effects of governing parameters such as transient, heat generation, micropolar parameter, Prandtl number, Biot number, and Reynolds number on the velocity and temperature profiles are discussed. It is found that the presence of heat generation enhances the velocity and temperature of the micropolar fluid at the middle of the channel.     

Thermal-diffusion and diffusion-thermo effects on combined heat and mass transfer by hydromagnetic three-dimensional free convection over a permeable stretching surface with radiation

The thermal-diffusion and diffusion-thermo effects on the heat and mass transfer characteristics of free convection past a continuously stretching permeable surface in the presence of magnetic field, blowing/suction and radiation are studied. The fluid viscosity is assumed to vary with temperature. The resulting, governing three-dimensional equations are transformed using a similarity transformation and then solved numerically by the shooting method. Comparison with previously published work is performed and full agreement is obtained. A parametric study showing the effects of variable viscosity parameter β, magnetic parameter M, Dufour number Df, Soret number Sr, radiation parameter R and blowing/suction parameter f₀ on the velocity, temperature, and concentration field of a hydrogen-air mixture as a non-chemical reacting fluid pair, as well as the local skin-friction coefficient, the local Nusselt number, and the local Sherwood number is carried out. These are illustrated graphically and in tabular form to depict special features of the solutions.     

Heat transfer in MHD flow of dusty viscoelastic (Walters’ liquid model-B) stratified fluid in porous medium under variable viscosity

The paper investigates the effects of heat transfer in MHD flow of viscoelastic stratified fluid in porous medium on a parallel plate channel inclined at an angle θ. A laminar convection flow for incompressible conducting fluid is considered. It is assumed that the plates are kept at different temperatures which decay with time. The partial differential equations governing the flow are solved by perturbation technique. Expressions for the velocity of fluid and particle phases, temperature field, Nusselt number, skin friction and flow flux are obtained within the channel. The effects of various parameters like stratification factor, magnetic field parameter, Prandtl number on temperature field, heat transfer, skin friction, flow flux, velocity for both the fluid and particle phases are displayed through graphs and discussed numerically.     

Dual Solutions of MHD Boundary Layer Flow of a Micropolar Fluid with Weak Concentration over a Stretching/Shrinking Sheet

We investigate the dual solutions for the MHD flow of micropolar fluid over a stretching/shrinking sheet with heat transfer. Suitable relations transform the partial differential equations into the ordinary differential equations.Closed forms solutions are also obtained in terms of confluent hypergeometric function. This is the first attempt to determine the exact solutions for the non-linear equations of MHD micropolar fluid model. It is demonstrated that the microrotation parameter helps in increasing Nusselt number and the dual solutions exist for all fluid flow parameters under consideration. The dual behavior of dimensionless velocity, temperature, microrotation, skin-friction coefficient,local Nusselt number is displayed on graphs and examined.     

Numerical investigation of using micropolar fluid model for EHD flow through a smooth channel

In this paper, a numerical method is presented to investigate the Electrohydrodynamic effect using micropolar fluid model. The EHD flow for the forced convection heat transfer in a smooth channel is simulated. The computed results were compared with the fully turbulent flow approach. It is found that the micropolar model can be used to simulate the hydraulically laminar flow. In addition, the heat transfer enhancement has the same efficiency for both the micropolar and the k-ε models. The change of the applied voltage and the Reynolds number caused various deviations of the results obtained from the two approaches up to a maximum of 20.79%, and a minimum of 0.03%.     

Heat and mass transfer of MHD convective boundary layer flow past a stretching porous wall embedded in a porous medium

The hydromagnetic convective boundary layer flow past a stretching porous wall embedded in a porous medium with heat and mass transfer in the presence of a heat source and under the influence of a uniform magnetic field is studied. Exact solutions of the basic equations of motion, heat and mass transfer are obtained after reducing them to nonlinear ordinary differential equations. The reduced equations of heat and mass transfer are solved using a confluent hypergeometric function. The effects of the flow parameters such as a suction parameter (N), magnetic parameter (M), permeability parameter (K _p ), wall temperature parameter (r), wall concentration parameter (n), and heat source/sink parameter (Q) on the dynamics are discussed. It is observed that the suction parameter appears in the boundary condition ensuring the variable suction at the surface. Transverse component of the velocity increases only when magnetic field strength exceeds certain value, but the thermal boundary layer thickness and concentration distribution increase for all values. Results presented in this paper are in good agreement with the work of the previous author and also in conformity with the established theory.     

Unsteady boundary layer flow of a nanofluid over a stretching sheet with variable fluid properties in the presence of thermal radiation

In this paper, we investigated numerically an unsteady boundary layer flow of a nanofluid over a stretching sheet in the presence of thermal radiation with variable fluid properties. Using a set of suitable similarity transformations, the governing partial differential equations are reduced into a set of nonlinear ordinary differential equations. System of the nonlinear ordinary differential equations are then solved by the Keller-box method. The physical parameters taken into consideration for the present study are: Prandtl number Pr, Lewis number Le, Brownian motion parameter N _b, thermophoresis parameter N _t, radiation parameter N _r, unsteady parameter M. In addition to these parameters, two more new parameters namely variable thermophoretic diffusion coefficient parameter e and variable Brownian motion diffusion coefficient parameter β have been introduced in the present study. Effects of these parameters on temperature, volume fraction of the nanoparticles, surface heat and mass transfer rates are presented graphically and discussed briefly. To validate our method, we have compared the present results with some previously reported results in the literature. The results are found to be in a very good agreement.     

Heat transfer analysis for stretching flow over a curved surface with magnetic field

The analysis of a viscous fluid flow and heat transfer is carried out under the influence of a constant applied magnetic field over a curved stretching sheet. Heat transfer analysis is carried out for two heating processes, namely, prescribed surface temperature (PST) and prescribed heat flux (PHF). The equations governing the flow are modeled in a curvilinear coordinate system (r, s, z). The nonlinear partial differential equations are then transformed to nonlinear ordinary differential equations by using similarity transformations. The obtained system of equations is solved numerically by a shooting method using Runge-Kutta algorithm. The interest lies in determining the influence of dimensionless radius of curvature on the velocity, temperature, skin friction, and rate of heat transfer at the wall prescribed by the Nusselt number. The effects of Hartmann number are also presented for the fluid properties of interest.     

Numerical investigation of natural convection heat transfer of nanofluids in a Γ shaped cavity

This paper analyzes the heat transfer and fluid flow of natural convection in a Γ shaped enclosure filled with Al₂O₃/Water nanofluid that operates under differentially heated walls. The Navier–Stokes and energy equations are solved numerically. Heat transfer and fluid flow are examined for parameters of non-uniform nanoparticle size, mean nanoparticle diameter, nanoparticle volume fraction, Grashof number and different geometry of enclosure. Finite volume method is used for discretizating positional expressions, and the forth order Rung-Kuta is used for discretizating time expressions. Also an artificial compressibility technique was applied to couple continuity to momentum equations. Results indicate that using nanofluid causes an increase in the heat transfer and the Nusselt number so that for R = 0.001 in Gr = 10³, the Nusselt number 25%, in Gr = 10⁴ 26%, and in Gr = 10⁵ 28% increases. Furthermore; by decreasing the mean diameters of nanoparticles, Nusselt number increases. By increasing R parameter (d_p,min/d_p,max) and nano particle volume fraction, Nusselt number increases.     

Effect of Hall current and chemical reaction on MHD flow along a fluctuating porous flat plate with internal heat absorption/generation

Effect of Hall current on the unsteady free convection flow of a viscous incompressible and electrically conducting fluid past a fluctuating porous flat plate with internal heat absorption/generation in the presence of foreign gasses (such as H₂, CO₂, H₂O, NH₃) was investigated. The results are discussed with the effect of the parameters m, the Hall current, Mt, the hydromagnetic parameter, G _r the Grashoff number for heat transfer, G _c , the Grashoff number for mass transfer, S, the internal heat absorption/generation parameter, α, the transpiration parameter, S _c , the Schmidt parameter, and K _c the chemical reaction parameter for Prandtl number P _r = 0.71, which represents air. Further, the present study accounts for the 1st order chemical reaction affecting the flow characteristics. The governing equations are solved in closed form applying Hh _n (x) function. The effects of pertinent parameters characterizing the flow field are discussed with the help of graphs and tables. The important observation of the present study is that heat generation/absorption modifies the flow of current simultaneously to a magnetic force and thermal bouncy force. Heat generation combined with blowing leads to a sharp fall of temperature.     

Effects of surface roughness on mixed convective nanofluid flow past an exponentially stretching permeable surface

A numerical study is carried out to display the effects of surface roughness on mixed convective nanofluid flow along an exponentially stretching surface in presence of suction/injection. The dimensional coupled nonlinear partial differential equations are transformed into dimensionless form by using suitable non-similar transformations. The resulting equations are solved by utilizing the Quasilinearization technique as well as the implicit finite difference scheme. The influence of several non-dimensional parameters on various profiles and gradients is examined. The results are presented graphically, which are analyzed to depict the effects of various physical parameters, for example, Brownian diffusion parameter Nb, thermophoresis parameter Nt, suction/blowing parameter A and Lewis number Le. In order to analyse the influence of surface roughness on mixed convective nanofluid flow, the major part of this research paper is devoted to investigate the effects of the small parameter α and frequency parameter n over the gradients defined at the wall. The results reveal that an increase in the values of Nb and Nt, enhances the velocity and temperature of the fluid. The increasing value of suction parameter (A > 0) reduces the velocity of the fluid. Further, the increasing values of Nb and Le decrease the nanoparticle volume fraction profile. The sinusoidal variations are observed in the skin-friction coefficient, Nusselt number as well as the nanoparticle Sherwood number. Moreover, with the addition of nanoparticles, the magnitude of the skin-friction coefficient increases, while the magnitude of heat transfer rate decreases, significantly.     

Second law analysis of the flow of two immiscible micropolar fluids between two porous beds

This work investigates the effect of entropy generation rate within the flow of two immiscible micropolar fluids in a horizontal channel bounded by two porous beds at the bottom and top. The flow is considered in four zones. Zone IV contains the flow of viscous fluid in the large porous bed at the bottom, zone I and zone II contain the free flow of two immiscible micropolar fluids, and zone III contains the flow of viscous fluid in the thin porous bed at the top. The flow is assumed to be governed by Eringen’s micropolar fluid flow equations in the free channel. Darcy’s law and Brinkman’s model are used for flow in porous zones, namely, zone IV and zone III, respectively. The closed form expressions for entropy generation number and Bejan number are derived in dimensionless formby using the expressions of velocity, microrotation and temperature. The effect of physical parameters like a couple stress parameter and micropolarity parameter on velocity, microrotation, temperature, entropy generation number and Bejan number are investigated.     

MHD mixed convection flow and heat transfer in a porous medium

The effects of a steady two-dimensional laminar MHD mixed convection flow and heat transfer against a heated vertical semi-infinite permeable surface in a porous medium are discussed. The coupled nonlinear partial differential equations describing the conservation of mass, momentum, and energy are solved by a perturbation technique. The results are presented to illustrate the influence of Hartmann number (M), Prandtl number (Pr), permeability parameter (K _p ), suction/blowing parameter (f _w ), heat generation/absorption coefficient (?), and mixed convection or buoyancy parameter (γ). The effects of different parameters on the velocity and temperature as well as the skin friction and wall heat transfer are discussed with the help of figures.     

Families of solutions to the generalized Ginzburg-Landau equation and structural transitions between them

Solutions to the generalized Ginzburg-Landau equations for superconductors are obtained for a Ginzburg-Landau parameter κ close to unity. The families of solutions with arbitrary number n of flux quanta in a unit cell are analyzed. It is shown that under certain conditions, a cascade of phase transitions between different structures in a magnetic field appears near T _c . Algebraic equations are derived for determining the boundaries of coexistence of different phases on the {T, H ₀} plane.     

Entropy Generation Analysis of the Flow Boiling in Microgravity Field

Entropy generation analysis of the flow boiling in microgravity field is conducted in this paper. A new entropy generation model based on the flow pattern and the phase change process is developed in this study. The velocity ranges from 1 m/s to 4 m/s, and the heat flux ranges from 10,000 W/m² to 50,000 W/m², so as to investigate their influence on irreversibility during flow boiling in the tunnel. A phase–change model verified by the Stefan problem is employed in this paper to simulate the phase–change process in boiling. The numerical simulations are carried out on ANSYS-FLUENT. The entropy generation produced by the heat transfer, viscous dissipation, turbulent dissipation, and phase change are observed at different working conditions. Moreover, the Be number and a new evaluation number, E_P, are introduced in this paper to investigate the performance of the boiling phenomenon. The following conclusions are obtained: (1) a high local entropy generation will be obtained when only heat conduction in vapor occurs near the hot wall, whereas a low local entropy generation will be obtained when heat conduction in water or evaporation occurs near the hot wall; (2) the entropy generation and the Be number are positively correlated with the heat flux, which indicates that the heat transfer entropy generation becomes the major contributor of the total entropy generation with the increase of the heat flux; (3) the transition of the boiling status shows different trends at different velocities, which affects the irreversibility in the tunnel; (4) the critical heat flux (CHF) is the optimal choice under the comprehensive consideration of the first law and the second law of the thermodynamics.     

Laminar natural convection between vertical isothermal heated plates with different temperatures

Numerical investigation of laminar free convection heat transfer in the vertical parallel plate channel with asymmetric heating is presented. Both inlet and exit effects are included into the analysis. A numerical solution is obtained for a Prandtl number of 0.71 and for modified Rayleigh number [`(Ra)]\overline {Ra} = 10⁻¹ ÷ 10⁵, and varying heating ratio T_R = 0 ÷ 1 and aspect ratio A = 10. Fully elliptic Navier-Stokes and energy equations are solved using the finite volume techniques with staggered grid arrangements. The obtained results show a strong influence of the temperature ratio on local and average heat transfer coefficient on the hot and cold plates. With reduction of T_R the heat transfer parameter on the hot wall grows, and on the cold one, on the contrary, it decreases. As a result, the total heat exchange from two plates depends poorly on the parameter T_R.     

Thermal radiation effects on MHD flow of a micropolar fluid over a stretching surface with variable thermal conductivity

In this paper, the effects of variable thermal conductivity and radiation on the flow and heat transfer of an electrically conducting micropolar fluid over a continuously stretching surface with varying temperature in the presence of a magnetic field are considered. The surface temperature is assumed to vary as a power-law temperature. The governing conservation equations of mass, momentum, angular momentum and energy are converted into a system of non-linear ordinary differential equations by means of similarity transformation. The resulting system of coupled non-linear ordinary differential equations is solved numerically. The numerical results show that the thermal boundary thickness increases as the thermal conductivity parameter S$S$ increases, while it decreases as the radiation parameter F$F$ increases. Also, it was found that the Nusselt number increases as F$F$ increases and decreases as S$S$ increases.     

Laminar free convection heat transfer between vertical isothermal plates

The paper represents results on numerical investigation of flow and heat transfer between two isothermal vertical plates under laminar natural convection. A system of complete Navier–Stokes equations is solved for a two-dimensional gas flow between the plates along with additional rectangular regions (connected to inlet and outlet sections), whose characteristic sizes are much greater than the spacing between the plates. The calculations were performed over very wide ranges of Rayleigh number Ra = 10 ÷ 10⁵ and a relative channel length AR = L/w = 1 ÷ 500. The influence of the input parameters on the gas-dynamic and thermal structure of thermogravitational convection, the local and mean heat transfer, and also the gas flow rate between the plates (convective draft. We determined sizes of the regions and regime parameters when the local heat flux on the walls tends to zero due to the gas temperature approach to the surface temperature. It is shown that the mean heat transfer decreases as the relative channel length AR grows, whereas the integral gas flow rate (convective draft) and Reynolds number in the channel Re = 2wUm/ν increase. The use of a modified Rayleigh number Ra* = Ra · (w/L) (Elenbaas number) leads to generalization of calculation data on mean heat transfer. These data are in good agreement with the correlations for heat transfer [1, 2] and gas flow rate [3]. The reasons of variation of the data in the range of low Rayleigh numbers are discussed in detail.