Calorimetric investigation of the effect of hydroxyanthraquinones in Rheum officinale Baill on Staphylococcus aureus growth

The inhibitory effects of five hydroxyanthraquinones (HAQs) from root and rhizoma of Rheum officinale Baill, a traditional Chinese medicinal (TCM) herb, on Staphylococcus aureus growth were investigated by calorimetry. The power-time curves of S.aureus with and without HAQ were acquired and the extent and duration of inhibitory effects on the metabolism evaluated by growth rate constants (k₁, k₂), half inhibitory ratio (IC₅₀), maximum heat output (P_max) and peak time (t_p). The value of k₁ and k₂ of S. aureus in the presence of the five HAQs decreased with the increasing concentrations of HAQs. Moreover, P_max was reduced and the value of t_p increased with increasing concentrations of the five drugs. The inhibitory activity varied for different drugs. IC₅₀ of the five HAQs was 4 μg ml⁻¹ for emodin, 3.5 μg ml⁻¹ for rhein, 10 μg ml⁻¹ for aloe-emodin, 1000 μg ml⁻¹ for chrysophanol, 1600 μg ml⁻¹ for physcion. The sequence of antimicrobial activity of the five HAQs: rhein > emodin > aloe-emodin > chrysophanol > physicion.     

A study of the removal of heavy metals from aqueous solutions by Moringa oleifera seeds and amine-based ligand 1,4-bis[N,N-bis(2-picoyl)amino]butane

Uptake for lead, copper, cadmium, nickel and manganese from aqueous solution using the Moringa oleifera seeds biomass (MOSB) and amine-based ligand (ABL) was investigated. Experiments on two synthetic multi-solute systems revealed that MOSB performed well in the biosorption and followed the decreasing orders Pb(II) > Cu(II) > Cd(II) > Ni(II) > Mn(II) and Zn(II) > Cu(II) > Ni(II). The general trend of the heavy metal ions uptake by the amine-based ligand followed decreased in the order Mn > Cd > Cu > Ni > Pb, which is the reverse trend for what was observed for MOSB. Comparing the single- and multi-metal solutions, there was no clear effect in the biosorption capacity of MOSB suggesting the presence of sufficient active binding sites for all metal ions studied. The MOSB performance is also not affected by pH in the range 3.5–8.     

N-way modelling of sediment monitoring data from Mar Menor lagoon, Spain

The present paper deals with the application of Tucker3 modelling to a sediment monitoring data set from the area of Mar Menor coastal lagoon (Spain). The aim of the study is to model and interpret the fractionation of heavy metals in the suspended particulate matter and sediment fractions resulting by sedimentation processes. Since the lagoon is seriously influenced by anthropogenic activities the modelling aims an assessment of the environmental hazard, too. After application of various scaling and centering procedures and estimation of the model dimensionality, an optimal (3, 3, 3) Tucker3 model was chosen for data interpretation. Using the model output (factor loadings connected to the four main core elements) it could be concluded that the heavy metal concentrations in the suspended particulate matter and sediment fractions increase in order Cu > Mn > Zn ≈ Pb > Cd and could be examined as estimation of basic levels for all heavy metals caused by different sedimentation processes. The second important core element summarizes the anthropogenic influence of the mining activity in the region. The third important core element shows the different mobility of the heavy metals. The fourth important core element should be related to the specific sediment formation at one of the sampling location.     

Assessment of CaCl2, NaNO3 and NH4NO3 extraction procedures for the study of Cd, Cu, Pb and Zn extractability in contaminated soils

The variety of extraction procedures used in environmental studies makes it very difficult to compare the results obtained; therefore, harmonisation and standardisation is required. The extraction of heavy metals from soil by un-buffered salt solutions is a method used to estimate soil contamination and trace metal availability to plants. The present study assesses three of these methods. All the three methods are standardised or is undergoing standardisation in Europe: 0.01 mol l⁻¹ CaCl₂ (The Netherlands), 0.1 mol l⁻¹ NaNO₃ (Switzerland) and 1 mol l⁻¹ NH₄NO₃ (Germany). The soil-reference material BCR CRM 483, with indicative values for CaCl₂, NaNO₃, NH₄NO₃ extractable metals, was analysed for quality control purposes. The three methods were also applied to 10 contaminated soils and the extracted metals (Cd, Cu, Pb, and Zn) were determined. The procedures were found to be precise (typically <10%) for all metals, taking into account the low metal concentrations extracted. The metal extraction efficiency obtained with each procedure was slightly different, and the three methods provided equivalent information while predicting the relative trace-metal mobility (Cd>Zn>Cu>Pb) in the soils studied. From the experience obtained, the 0.01 mol l⁻¹ CaCl₂ extraction procedure seems to be the most suitable method for performing a harmonisation process, since this procedure combines an appropriate extraction capacity for this type of studies with the lowest salt concentration in the extracts and, consequently, with a more simple matrix for metal determination.     

Monitoring trace elements in selected organs of Antarctic penguin (Pygoscelis adeliae) by plasma-based techniques

A study was undertaken to evaluate the content and distribution of eight key elements, namely, As, Cd, Co, Cu, Hg, Mn, Pb and Se in liver, kidney and muscle of chick individuals of Adélie penguin (Pygoscelis adeliae). Samples were collected during the 2002/2003 austral summer season campaign around Jubany Station (Argentine scientific station), Potter Cove, King George Island. Solutions of organs were prepared by acid-assisted microwave (MW) digestion by employing HNO₃ and H₂0₂. Instrumental techniques selected to analyze the different tissues were inductively coupled plasma optical emission spectroscopy (ICP OES) and inductively coupled plasma mass spectrometry (ICP-MS). A wide range of elements retention capacity among the different organs was observed and the ranges ascertained are as follows (in μg g^− 1): As, 0.5 (liver)-0.8 (muscle); Cd, < 0.07 (muscle)-3.4 (kidney); Co, 0.07 (liver)-0.7 (muscle); Cu, 0.6 (muscle)-18 (liver); Hg, 0.2 (kidney)-2.7 (liver); Mn, 1.5 (muscle)-10 (liver); Pb, 0.1 (muscle)-2.0 (liver); Se, 3.0 (muscle)-8.4 (liver). The observed trend in metal accumulation in the three organs of chick penguins was in the order Cu > Mn > Se ? As > Co > Pb ? Cd > Hg. Levels of metals and metalloids were, in general terms, higher in liver that is a specific target organ for metal accumulation. This study aimed at contributing to the establishment of base-line data on potential pollutants of ecotoxicological interest in the Antarctic ecosystem.     

The application of an in vitro gastrointestinal extraction to assess the oral bioaccessibility of polycyclic aromatic hydrocarbons in soils from a former industrial site

The total and bioaccessible concentration of 16 polycyclic aromatic hydrocarbons (PAHs) in soil from a former industrial site was investigated. Typical total concentrations across the sampling sites ranged from 1.5 mg kg⁻¹ for acenaphthylene up to 243 mg kg⁻¹ for fluoranthene. The oral bioaccessibility of PAHs in soil was assessed using an in vitro gastrointestinal extraction (Fed Organic Estimation human Simulation Test, FOREhST method). The oral bioaccessibility data indicated that fluorene, phenanthrene, chrysene, indeno(1,2,3-cd)pyrene and dibenzo(a,h)anthracene had the highest % bioaccessible fraction (based on their upper 75th percentile values being >60%) while the other PAHs had lower % bioaccessible fractions (means ranging between 35 and 59%). Significantly lower bioaccessibilities were determined for naphthalene. With respect to method validation and inter-laboratory comparison, the total and bioaccessible concentrations of benzo(a)anthracene, benzo(b)anthracene, benzo(k)fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene and dibenzo(a,h)anthracene was compared to published data derived using the same samples. The total PAH concentrations at the site were compared with generic assessment criteria (GAC) using the residential land use scenario (with plant uptake at 6% soil organic matter). Concentrations of 7 of the PAHs investigated within the soils could lead to an unacceptable risk to human health at this site.     

Quantification of isoorientin and total flavonoids in Passiflora edulis fruit pulp by HPLC-UV/DAD

A method is reported for the quantification of isoorientin (using a standard addition method) and total flavonoids (expressed as rutin, using the external standard method) in passion fruit pulp (Passiflora edulis Sims f. flavicarpa Degener, Passifloraceae). Extraction of flavonoids was optimized by experimental design methodology, and quantitative analysis was performed by high-performance liquid chromatography with photo-diode array detection (HPLC-UV/DAD). The method was developed and validated according to ICH requirements for specificity, linearity, accuracy, precision (repeatability and intermediate precision), LOD and LOQ. Rutin was chosen as standard for the quantification of total flavonoids in order to propose a HPLC method feasible for routine analysis of the flavonoids in the passion fruit pulp. The passion fruit pulp contained 16.226 ± 0.050 mg L^− 1 of isoorientin and 158.037 ± 0.602 mg L^− 1 of total flavonoid, suggesting that P. edulis fruits may be comparable with other flavonoid food sources such as orange juice or sugarcane juice.     

Good linear relationship between logarithms of Eigen’s water exchange constants for several divalent metal ions and activation energies of corresponding metal-catalyzed alkoxysilane hydrolysis in ethylene-propylene copolymer system

Catalytic efficiencies of seven divalent metal acetylacetonate complexes [M(acac)₂; M = Cd(II), Co(II), Cu(II), Fe(II), Ni(II), Pb(II), and Zn(II)] with respect to the water-crosslinking kinetics of vinyltrimethoxysilane-grafted ethylene-propylene copolymer (EPR-g-VTMS) were investigated to examine the effects of progressive changes in metal ion using ATR-FTIR spectroscopy. The hydrolysis activation energies of EPR-g-VTMS follows the order: No catalyst ≈ Ni(acac)₂ > Co(acac)₂ > Fe(acac)₂ ≈ Zn(acac)₂ > Cd(acac)₂ ≈ Cu(acac)₂ > Pb(acac)₂. Interestingly, the kinetics results revealed that the plots of hydrolysis activation energies of EPR-g-VTMS containing M(acac)₂ complexes and Eigen’s water exchange constants for corresponding metal ions showed a excellent linear relationship, suggesting that the reaction pathway for the silane water-crosslinking with hydrous M(acac)₂ complex in EPR-g-VTMS system may be similar to that for water exchange of the metal ion in an aqueous system. Based on the knowledge of traditional kinetics studies by Eigen and Wilkins and hybrid sol-gel chemistry, the plausible catalytic mechanism for M(acac)₂ complexes in EPR-g-VTMS system was proposed.     

New binary systems Mg-M-O (M=Y, La, Ce): Synthesis and physico-chemical characterization

New binary oxide Mg-M-O (M=Y, La, Ce) systems are obtained by co-precipitation and characterized by adsorption methods, X-ray diffraction method (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy of adsorbed probe molecules (CO and CDCl₃). It is shown that Mg-Y-O systems after calcination at 450-750 °C represent the physical mixtures of MgO and Y₂O₃, while the components of Mg-La(Ce)-O systems interact to form La₂MgO_x and (Ce,Mg)O₂ solid solutions, respectively. From XPS data, the surface of the binary systems is enriched with lanthanide ions. Addition of ≈5 mol% M₂O₃ to MgO results in an increase in concentrations of strong and weak Lewis acidic sites, the content of the latter being much higher and changing in the series: MgO<Mg-Ce-O<Mg-La-O<Mg-Y-O. At the same time basic sites become stronger in the binary systems but their total content decreases in comparison to that in individual MgO. Mg-M-O samples containing ≈5 mol% M₂O₃ are highly-dispersed and characterized by bimodal porous texture.     

pHstatvs. single extraction tests to evaluate heavy metals and arsenic leachability in environmental samples

Here we compared the pH_stat test, which examines the leachability of major elements (Ca, Mg, Al, Fe, and Mn), dissolved organic carbon, and trace elements (Cd, Zn, Cu, Pb, and As) in a wide pH range, with single extraction tests based on the use of mild extractants (calcium chloride, acetic acid or EDTA). For this purpose, we examined samples from a variety of environmental conditions (sludges, mineral soils, organic soils, and soils with particulate and/or soluble contamination). Extraction yields obtained with CaCl₂ (0.01 mol L⁻¹) and CH₃COOH (0.43 mol L⁻¹) correlated well with those from the pH_stat at the same pH (r = 0.98 and 0.95, respectively), while the use of EDTA (0.05 mol L⁻¹) led to systematically higher extraction yields than those quantified with the pH_stat at the same pH. However, the pH_stat test had three distinct advantages: (1) it revealed the relationship between the solubility of the main soil phases and pH; (2) it showed the variation in pollutant leachability due to changes in pH; and (3) it better predicted the maximum contaminant availability. Thus we propose that the pH_stat is the best laboratory tests to evaluate the contaminant leachability over a wide range of sample types (soil, sludge, and sediment).     

In vitro evaluation of Cu and Fe bioavailability in cashew nuts by off-line coupled SEC-UV and SIMAAS

In this work Cu and Fe bioavailability in cashew nuts was evaluated using in vitro method. Extractions with simulated gastric and intestinal fluids and dialysis procedures were applied for this purpose. The proteins separation and quantification were performed by size exclusion chromatography (SEC) coupled on-line to ultra-violet (UV) and off-line to simultaneous multielement atomic absorption spectrometry (SIMAAS). The SEC-UV and SIMAAS profiles of the protein fractions obtained by alkaline extraction (NaOH) and precipitation with HCl indicated the presence of high and low molecular weight species in the range between >75 kDa and 9.3 kDa. Almost 83% of Cu and 78% of Fe were extracted during cashew nut digestion and 90% of both elements were dialyzed. With these results it is possible to assume that 75% of Cu and 70% of Fe present in cashew nut could be bioavailable. The SEC-UV and SIMAAS chromatographic profiles obtained after in vitro gastrointestinal digestion reveal that Cu and Fe not dialyzed can be associated to a compound of 9.2 kDa.     

Determination of bioavailable fractions of Zn, Cu, Ni, Pb and Cd in soils and sludges by atomic absorption spectrometry

The single extraction procedures validated by the standards, measurement and testing programme (formerly BCR), extraction with 0.05 mol l⁻¹ EDTA and 0.43 mol l⁻¹ acetic acid, have been applied to reference materials of soils and sludges with certified total values of elements, in order to determine bioavailable contents of Cd, Cu, Ni, Pb and Zn. These soils, which represent uncontaminated pedologically different types of soils from Slovakia and sludges from city water treatment are characterized for the bioavailable fraction of the metals using the procedures followed by SM&T Programme. Concentrations of the elements under the study in the extracts were determined by flame (FAAS) using calibration curves in appropriate extractants and by electrothermal (ETAAS) atomic absorption spectrometry, using technique of standard additions for the evaluation of the results. The accuracy of the extraction procedures and determinations of the elements in the extracts was controlled using CRM 483 certified for EDTA- and acetic acid-extractable contents of Cd, Cu, Ni, Pb and Zn in sewage sludge amended soil.     

Crystal chemistry of M[PO2(OH)2]2·2H2O compounds (M=Mg, Mn, Fe, Co, Ni, Zn, Cd): Structural investigation of the Ni, Zn and Cd salts

The compounds M[PO₂(OH)₂]₂·2H₂O (M=Mg, Mn, Fe, Co, Ni, Zn, Cd) were prepared from super-saturated aqueous solutions at room temperature. Single-crystal X-ray structure investigations of members with M=Ni, Zn, Cd were performed at 295 and 120 K. The space-group symmetry is P2₁/n, Z=2. The unit-cell parameters are at 295/120 K for M=Ni: a=7.240(2)/7.202(2), b=9.794(2)/9.799(2), c=5.313(1)/5.285(1) Å, β=94.81(1)/94.38(1)°, V=375.4/371.9 Å³; M=Zn: a=7.263(2)/7.221(2), b=9.893(2)/9.899(3), c=5.328(1)/5.296(2) Å, β=94.79(1)/94.31(2)°, V=381.5/377.5 Å³; M=Cd: a=7.356(2)/7.319(2), b=10.416(2)/10.423(3), c=5.407(1)/5.371(2) Å, β=93.85(1)/93.30(2)°, V=413.4/409.1 Å³. Layers of corner-shared MO₆ octahedra and phosphate tetrahedra are linked by three of the four crystallographically different hydrogen bonds. The fourth hydrogen bond (located within the layer) is worth mentioning because of the short O_h?O bond distance of 2.57-2.61 Å at room temperature (2.56-2.57 Å at 120 K); only for M=Mg it is increased to 2.65 Å. Any marked temperature-dependent variation of the unit-cell dimension is observed only vertical to the layers. The analysis of the infrared (IR) spectroscopy data evidences that the internal PO₄ vibrations are insensitive to the size and the electronic configuration of the M²⁺ ions. The slight strengthening of the intra-molecular P-O bonds in the Mg salt is caused by the more ionic character of the Mg-O bonds. All IR spectra exhibit the characteristic “ABC trio” for acidic salts: 2900-3180 cm⁻¹ (A band), 2000-2450 cm⁻¹ (B band) and 1550-1750 cm⁻¹ (C band). Both the frequency and the intensity of the A band provide an evidence that the PO₂(OH)₂ groups in M[PO₂(OH)₂]₂·2H₂O compounds form weaker hydrogen bonds as compared with other acidic salts with comparable O?O bond distances of about 2.60 Å. The observed shift of the O-H stretching vibrations of the water molecule in the order M=Mg>Mn≈Fe≈Co>Ni>Zn≈Cd has been discussed with respect to the influence of both the character and the strength of M↔H₂O interactions.     

Immunochromatographic flow-injection method for detection of human serum immunoglobulin G antibodies to Helicobacter pylori

This study reports on the development of an immunochromatographic flow-injection (FI) method for the quantitation of human serum IgG antibodies to Helicobacter pylori. Patients’ sera were injected into the carrier stream of a FI manifold incorporating an H. pylori immuno-adsorbent reactor. The immuno-adsorbent was prepared by covalently linking H. pylori antigens to periodate oxidized Sepharose CL-4B. Any H. pylori antibody present in the serum is bound to the immuno-sorbent. The bound antibody was quantified by injecting into the carrier stream anti-human IgG peroxidase conjugate followed by TMB/H₂O₂ as the enzyme substrate. The FI system was optimized with respect to antigen loading (1.0 mg/ml gel), bioreactor length (3.0 cm), enzyme conjugate (0.2 mg/ml) and sample loop size (250 μl). One hundred clinical samples were analyzed for their H. pylori antibody concentrations and the results evaluated with respect to their receiver-operator characteristics (ROC). When a cut-off absorbance of between 0.7 and 0.75 was used for positive and negative samples a specificity (>95%), a sensitivity (>90%)and an overall accuracy (>94%) were obtained.     

Study on different pre-treatment procedures for metal determination in Orujo spirit samples by ICP-AES

In this work several pre-treatment methods were studied for metal (Na, K, Mg, Cu and Ca) determination in Orujo spirit samples using inductively coupled plasma atomic emission spectrometry (ICP-AES). Dilution, digestion, evaporation, and cryogenic desolvatation techniques were comparatively evaluated. Because of their analytical characteristics, digestion and evaporation with nitrogen current were found to be appropriate procedures for the determination of metals in alcoholic spirit samples. Yet, if simplicity and application time are to be considered, the latter—evaporation in a water bath with a nitrogen current—stands out as the optimum procedure for any further determinations in Orujo samples by ICP-AES. Low detection levels and wide linear ranges (sufficient to determine these metals in the samples studied) were achieved for each metal. The recoveries (in the 97.5-100.5% range) and the precision (R.S.D. lower than 5.6%) obtained were also satisfactory. The selected procedure was applied to determine the content of metals in 80 representative Galician Orujo spirit samples with and without a Certified Brand of Origin (CBO) which had been produced using different distillation systems. The metal concentrations ranged between 0.37 and 79.7 mg L⁻¹ for Na, <LOD to 12.4 mg L⁻¹ for K, 0.02-4.83 mg L⁻¹ for Mg content, <LOD to 37.3 mg L⁻¹ for Cu and 0.03-13.10 mg L⁻¹ for Ca.     

Alkyl and dialkylammonium tetrafluoroborate catalyzed cis-trans isomerization of 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane

Alkyl and dialkylammonium tetrafluoroborate promoted cis-trans isomerization of 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane (1) in DMSO-d₆ were studied. The isomerization equilibrium constant K are within the range of 3.74-3.30 from 22 to 47 °C. Thermodynamic parameters of ΔH° and ΔS° for the isomerization were −0.95 kcal/mol and −0.59 cal/mol-K respectively. The isomerization rate is first order in [cis-1] and second order in [R_nNH_4−nBF₄]. Both components of R_nNH_4−n⁺ and BF₄⁻ are essential for the catalytic cis-trans isomerization. The catalytic strength follows the decreasing order of ⁺H₃N(CH₂)₆NH₃⁺>n-C₈H₁₇NH₃⁺>n-C₁₆H₃₃NH₃⁺>Me₃CNH₃⁺>PhCH₂NH₃⁺>Et₂NH₂⁺?Ph₂CHNH₃⁺, Et₃NH⁺. Inversion region was observed in the plot of ln(k_f/T) versus (1/T) with the ceiling located at around 38 °C. The positive activation enthalpy of 9 kcal/mol was estimated at 22-32 °C. The activation enthalpy turns to be slightly negative at T>38 °C.     

Validation of an online dual-loop cleanup device with an electrospray ionization tandem mass spectrometry-based system for simultaneous quantitative analysis of urinary benzene exposure biomarkers trans, trans-muconic acid and S-phenylmercapturic acid

The aim of this study is to validate isotope-dilution electrospray ionization tandem mass spectrometry (ESI-MS-MS) method with a dual-loop cleanup device for simultaneous quantitation of two benzene metabolites, trans, trans-muconic acid (ttMA) and S-phenylmercapturic acid (SPMA), in human urine. In this study, a pooled blank urine matrix from rural residents was adopted for validation of the analytical method. The calibration curve, detection limit, recovery, precision, accuracy and the stability of sample storage for the system have been characterized. Calibration plots of ttMA and SPMA standards spiked into two kinds of urine matrixes over a wide concentration range, 1/32-8-fold biological exposure indices (BEIs) values, showed good linearity (R > 0.9992). The detection limits in pooled urine matrix for ttMA and SPMA were 1.27 and 0.042 μg g⁻¹ creatinine, respectively. For both of ttMA and SPMA, the intra- and inter-day precision values were considered acceptable well below 25% at the various spiked concentrations. The intra- and inter-day apparent recovery values were also considered acceptable (apparent recovery >90%). The ttMA accuracy was estimated by urinary standard reference material (SRM). The accuracy reported in terms of relative error (RE) was 5.0 ± 2.0% (n = 3). The stability of sample storage at 4 or −20 °C were assessed. Urinary ttMA and SPMA were found to be stable for at least 8 weeks when stored at 4 or −20 °C. In addition, urine samples from different benzene exposure groups were collected and measured in this system. Without tedious manual sample preparation procedure, the analytical system was able to quantify simultaneously ttMA and SPMA in less than 20 min.     

Comparison of different permanent chemical modifiers for lead determination in Orujo spirits by electrothermal atomic absorption spectrometry

Different analytical methods for the determination of lead in Orujo spirits by electrothermal atomic absorption spectrometry (ETAAS) were developed using permanent modifiers (W, Ir, Ru, W-Ir and W-Ru) thermally deposited on platforms inserted in pyrolitic graphite tubes and Pd-Mg(NO₃)₂ conventional modifier mixture. In all cases, the Pb determination was performed without any sample pretreatment or preconcentration steps. The comparison between the chemical modifiers employed has been made in terms of pyrolysis and atomization temperatures, characteristic masses, detection limits, and atomization and background signal shapes. The limits of detection obtained were 0.375, 0.387, 0.109, 0.251 and 0.267 ng mL⁻¹ for W, Ir, Ru, W-Ir and W-Ru, respectively and 0.710 ng mL⁻¹ for Pd-Mg(NO₃)₂. The characteristic masses were 14.1, 11.2, 5.6, 8.3 and 9.3 pg for W, Ir, Ru, W-Ir and W-Ru, respectively and 22.2 pg for Pd-Mg(NO₃)₂. For all the developed procedures using the different modification systems, the relative standard deviations (<10%) and the analytical recoveries (95-103%) were acceptable. The more suitable methods for Pb determination in distillate spirits were those using permanent modifiers in contrast with classical Pd-Mg(NO₃)₂. The best analytical performance was achieved for W, Ir and W-Ir methods, which were applied to lead determination in Orujo spirit samples from Galicia (NW Spain). The Pb concentrations found in the analyzed samples were comprised in the range (<LOD to 1.5 μg mL⁻¹).