矩形压电体中反平面裂纹的电弹性场

基于线性压电理论,本文获得了含有中心反平面裂纹的矩形压电体中的奇异应力和电场。利用Fourier积分变换和Fourier正弦级数将电绝缘型裂纹问题化为对偶积分方程,并进一步归结为易于求解的第二类Fred-holm积分方程。获得了裂纹尖端应力、应变、电位移和电场的解析解,求得了裂纹尖端场的强度因子及能量释放率。分析了压电矩形体的几何尺寸对它们的影响。结果表明,对于电绝缘型裂纹,裂纹尖端附近的各个场变量都具有-1/2阶的奇异性,能量释放率与电荷载的方向及大小有关,并且有可能为负值。     

Analysis of Two Collinear Cracks in a Piezoelectric Layer Bonded to Two Half Spaces Subjected to Anti-plane Shear

In this paper, the behavior of two collinear anti-plane shear cracks in a piezoelectric layer bonded to two half spaces is investigated by a new method for the impermeable crack face conditions. The cracks are parallel to the interfaces in the mid-plane of the piezoelectric layer. By using the Fourier transform, the problem can be solved with two pairs of triple integral equations. These equations are solved using the Schmidt method. This process is quite different from that adopted previously. Numerical examples are provided to show the effect of the geometry of the interacting cracks and the piezoelectric constants of the material upon the stress intensity factor of the cracks.     

Analysis of a permeable interface crack in elastic dielectric/piezoelectric bimaterials

A permeable interface crack between elastic dielectric material and piezoelectric material is studied based on the extended Stroh’s formalism. Motivated by strong engineering demands to design new composite materials, the authors perform numerical analysis of interface crack tip singularities and the crack tip energy release rates for 35 types of dissimilar bimaterials, respectively, which are constructed by five kinds of elastic dielectric materials: Epoxy, Polymer, Al₂O₃, SiC, and Si₃N₄ and seven kinds of practical piezoelectric ceramics: PZT-4, BaTiO₃, PZT-5H, PZT-6B, PZT-7A, P-7, and PZT-PIC 151, respectively. The elastic dielectric material with much smaller permittivity than commercial piezoelectric ceramics is treated as a special transversely isotropic piezoelectric material with extremely small piezoelectricity. The present investigation shows that the structure of the singular field near the permeable interface crack tip consists of three singularities: and , which is quite different from that in the impermeable interface crack. It can be concluded that different far field loading cases have significant influence on the near-tip fracture behaviors of the permeable interface crack. Based on the present theoretical treatment and numerical analysis, the electric field induced crack growth is well explained, which provides a better understanding of the failure mechanism induced from interface crack growth in elastic dielectric/piezoelectric bimaterials. The project supported by the National Natural Science Foundation of China (10572110), Doctor Foundation of the Chinese Education Ministry and Doctorate Foundation of Xi’an Jiaotong University. The English text was polished by Yunming Chen.     

Impact response of an interface crack in a hybrid piezoelectric laminate

Summary  In a hybrid laminate containing an interfacial crack between piezoelectric and orthotropic layers, the dynamic field intensity factors and energy release rates are obtained for electro-mechanical impact loading. The analysis is performed within the framework of linear piezoelectricity. By using integral transform techniques, the problem is reduced to the solution of a Fredholm integral equation of the second kind, which is obtained from one pair of dual integral equations. Numerical results for the dynamic stress intensity factor show the influence of the geometry and electric field. Received 29 June 2001; accepted for publication 3 December 2001     

Crack driving force and energy-momentum tensor in electroelastodynamic fracture

The energy flux integral and the energy-momentum tensor for studying the crack driving force in electroelastodynamic fracture are formulated within the framework of the nonlinear theory of coupled electric, thermal and mechanical fields based on fundamental principles of thermodynamics. This formulation lays a foundation for in-depth understanding of the fracture behavior of piezoelectric materials. Remarkably, the dynamic energy release rate thus obtained has an odd dependence on the electric displacement intensity factor for steady-state propagation of a conventional (unelectroded) crack with exact, electrically permeable, semi-permeable, or impermeable crack surface condition, which is in agreement with experimental evidence.     

Electroelastic analysis of a penny-shaped crack in a piezoelectric ceramic under mode I loading

Following the theory of linear piezoelectricity, we consider the electroelastic problem for a piezoelectric ceramic with a penny-shaped crack under mode I loading. The problem is formulated by means of Hankel transform and the solution is solved exactly. The stress intensity factor, energy release rate and energy density factor for the exact and impermeable crack models are expressed in closed form and compared for a P-7 piezoelectric ceramic. Based on current findings, we suggest that the energy release rate and energy density factor criteria for the exact crack model are superior to fracture criteria for the impermeable crack model.     

Electroelastic interaction between a piezoelectric screw dislocation and a confocal elliptic blunt crack with elliptical inhomogeneity

The electroelastic interaction between a piezoelectric screw dislocation and an elliptical inhomogeneity containing a confocal blunt crack under infinite longitudinal shear and in-plane electric field is investigated. Using the sectionally holomorphic function theory, Cauchy singular integral, singularity analysis of complex functions and theory of Rieman boundary problem, the explicit series solution of stress field is obtained when the screw dislocation is located in inhomogeneity. The intervention law of the interaction between blunt crack and screw dislocation in inhomogeneity is discussed. The analytical expressions of generalized stress and strain field of inhomogeneity are calculated, while the image force, field intensity factors of blunt crack are also presented. Moreover, a new matrix expression of the energy release rate and generalized strain energy density (SED) are deduced. With the size variation of blunt crack, the results can be reduced to the case of the interaction between a piezoelectric screw dislocation and a line crack in inhomogeneity. Numerical analysis are then conducted to reveal the effects of the dislocation location, the size of inhomogeneity and blunt crack and the applied load on the image force, energy release rate and strain energy density. The influence of dislocation on energy release rate and strain energy density is also revealed.     

功能梯度压电板条中电绝缘型运动裂纹的电弹性场

基于三维弹性理论和压电理论，对材料系数按指数函数规律分布的功能梯度压电板条中的反平面运动裂纹问题进行了求解。利用Fourier积分变换方法将电绝缘型运动裂纹问题化为对偶积分方程，并进一步归结为易于求解的第二类Fredholm积分方程。通过渐近分析，获得了裂纹尖端应力、应变、电位移和电场的解析解，给出了裂纹尖端场各个变量的角分布函数，并求得了裂纹尖端场的强度因子，分析了压电材料物性梯度参数、几何尺寸及裂纹运动速度对它们的影响。结果表明，对于电绝缘型裂纹，功能梯度压电板条中运动裂纹尖端附近的各个场变量都具有-1／2阶的奇异性；当裂纹运动速度增大时，裂纹扩展的方向会偏离裂纹面。     

An analytically-numerical approach for the analysis of an interface crack with a contact zone in a piezoelectric bimaterial compound

An interface crack with an artificial contact zone at the right-hand side crack tip between two dissimilar finite-sized piezoelectric materials is considered under remote mixed-mode loading. To find the singular electromechanical field at the crack tip, an asymptotic solution is derived in connection with the conventional finite element method. For mechanical loads, the stress intensity factors at the singular points are obtained. As a particular case of this solution, the contact zone model (in Comninou’s sense) is derived. A simple transcendental equation and an asymptotic formula for the determination of the real contact zone length are derived. The dependencies of the contact zone lengths on external load coefficients are illustrated in graphical form. For a particular case of a short crack with respect to the dimensions of the bimaterial compound, the numerical results are compared to the exact analytical solutions, obtained for a piezoelectric bimaterial plane with an interface crack.     

顶端受集中力偶的双材料平面界面接合楔体的对数奇异应力场

应用复变函数方法,通过构造复函数形式的特解序列,从理论上研究了顶端受集中力偶的双材料平面界面接合楔体的应力场,给出了相应的经典解,发现其存在一次和二次佯谬,相应的应力具有(Inr)／r2和(In2r)／r2的奇异性。     

Transient response of an insulating crack between dissimilar piezoelectric layers under mechanical and electrical impacts

Summary  The dynamic response of an interface crack between two dissimilar piezoelectric layers subjected to mechanical and electrical impacts is investigated under the boundary condition of electrical insulation on the crack surface by using the integral transform and the Cauchy singular integral equation methods. The dynamic stress intensity factors, the dynamic electrical displacement intensity factor, and the dynamic energy release rate (DERR) are determined. The numerical calculation of the mode-I plane problem indicates that the DERR is more liable to be the token of the crack growth when an electrical load is applied. The dynamic response shows a significant dependence on the loading mode, the material combination parameters as well as the crack configuration. Under a given loading mode and a specified crack configuration, the DERR of an interface crack between piezoelectric media may be decreased or increased by adjusting the material combination parameters. It is also found that the intrinsic mechanical-electrical coupling plays a more significant role in the dynamic fracture response of in-plane problems than that in anti-plane problems. Received 4 September 2001; accepted for publication 23 July 2002 The work was supported by the National Natural Science Foundation under Grant Number 19891180, the Fundamental Research Foundation of Tsinghua University, and the Education Ministry of China.     

Dynamic Response of a Piezoelectric Material with a Conducting Rigid Inclusion

The problem of a conducting rigid inclusion embedded in an infinite piezoelectric matrix is considered under the action of combined electromechanical impact loads. By using integral transform techniques, the mixed initial-boundary value problem for the case of anti-plane shear load and in-plane electric field is transformed into two systems of dual integral equations, the solutions of which give the singularity coefficients of electroelastic field near the inclusion tips in closed-form in the Laplace transform domain. Numerical results for the stress singularity coefficient in the physical space are presented graphically by numerically solving the resulting Fredholm integral equation and carrying out the numerical inversion of Laplace transform for a PZT-5H material with a conducting rigid line inclusion.     

Fracture behavior of a bonded magneto-electro-elastic rectangular plate with an interface crack

In this paper the anti-plane problem for an interface crack between two dissimilar magneto-electro-elastic plates subjected to anti-plane mechanical and in-plane magneto-electrical loads is investigated. The interface crack is assumed to be either magneto-electrically impermeable or permeable, and the position of the interface crack is arbitrary. The finite Fourier transform method is employed to reduce the mixed boundary-value problem to triple trigonometric series equations. The dislocation density functions and proper replacement of the variables are introduced to reduce these series equations to a standard Cauchy singular integral equation of the first kind. The resulting integral equation together with the corresponding single-valued condition is approximated as a system of linear algebra equations which can be easily solved. Field intensity factors and energy release rates are determined numerically and discussed in detail. Numerical results show the effects of crack configuration and loading combination parameters on the fracture behaviors of crack tips according to energy release rate criterion. The study of this problem is expected to have applications to the investigation of dynamic fracture properties of magneto-electro-elastic materials with cracks.     

An Interface Crack for a Functionally Graded Strip Sandwiched Between Two Homogeneous Layers of Finite Thickness

In this paper, the behavior of an interface crack for a functionally graded strip sandwiched between two homogeneous layers of finite thickness subjected to an uniform tension is resolved using a somewhat different approach, named the Schmidt method. The Fourier transform technique is applied and a mixed boundary value problem is reduced to two pairs of dual integral equations in which the unknown variables are the jumps of the displacements across the crack surface. To solve the dual integral equations, the jumps of the displacements across the crack surfaces are expanded in a series of Jacobi polynomials. This process is quite different from those adopted in previous works. Numerical examples are provided to show the effects of the crack length, the thickness of the material layer and the materials constants upon the stress intensity factor of the cracks. It can be obtained that the results of the present paper are the same as ones of the same problem that was solved by the singular integral equation method. As a special case, when the material properties are not continuous through the crack line, an approximate solution of the interface crack problem is also given under the assumption that the effect of the crack surface interference very near the crack tips is negligible. Contrary to the previous solution of the interface crack, it is found that the stress singularities of the present interface crack solution are the same as ones of the ordinary crack in homogenous materials.     

Opening and contact zones of an interface crack in a piezoelectric bimaterial under combined compressive-shear loading

A plane problem for a tunnel electrically permeable interface crack between two semi-infinite piezoelectric spaces is studied. A remote mechanical and electrical loading is applied. Elastic displacements and potential jumps as well as stresses and electrical displacement along the interface are presented using a sectionally holomorphic vector function. It is assumed that the interface crack includes zones of crack opening and frictionless contact. The problem is reduced to a combined Dirichlet–Riemann boundary value problem which is solved analytically. From the obtained solution, simple analytical expressions are derived for all mechanical and electrical characteristics at the interface. A quite simple transcendental equation, which determines the point of separation of open and close sections of the crack, is found. For the analysis of the obtained results, the main attention is devoted to the case of compressive-shear loading. The analytical analysis and numerical results show that, even if the applied normal stress is compressive, a certain crack opening zone exists for all considered loading values provided the shear field is present. It is found that the shear stress intensity factor at the closed crack tip and the energy release rates at the both crack tips depend very slightly on the magnitude of compressive loading.     

The scattering of harmonic elastic anti-plane shear waves by two collinear cracks in anisotropic material plane by using the non-local theory

In this paper, the dynamic behavior of two collinear cracks in the anisotropic elasticity material plane subjected to the harmonic anti-plane shear waves is investigated by use of the nonlocal theory. To overcome the mathematical difficulties, a one-dimensional nonlocal kernel is used instead of a two-dimensional one for the anti-plane dynamic problem to obtain the stress field near the crack tips. By use of the Fourier transform, the problem can be solved with the help of a pair of triple integral equations, in which the unknown variable is the displacement on the crack surfaces. To solve the triple integral equations, the displacement on the crack surfaces is expanded in a series of Jacobi polynomials. Unlike the classical elasticity solutions, it is found that no stress singularity is present near crack tips. The nonlocal elasticity solutions yield a finite hoop stress at the crack tips, thus allowing us to using the maximum stress as a fracture criterion. The magnitude of the finite stress field not only depends on the crack length but also on the frequency of the incident waves and the lattice parameter of the materials.     

Energy density and release rate study of an elliptic-arc interface crack in piezoelectric solid under anti-plane shear

The anti-plane problem of an elliptical inhomogeneity with an interfacial crack in piezoelectric materials is investigated. The system is subjected to arbitrary singularity loads (point charge and anti-plane concentrated force) and remote anti-plane mechanical and in-plane electrical loads. Using the complex variable method, the explicit series form solutions for the complex potentials in the matrix and the inclusion regions are derived. The electroelastic field intensity factors, the corresponding energy release rates and the generalized strain energy density at the cracks tips are then provided. The influence of the aspect ratio of the ellipse, the crack geometry and the electromechanical coupling coefficient on the energy release rate and the strain energy density is discussed and shown in graphs. The results indicate that the energy release rate increases with increment of the aspect ratio of the ellipse and the influence of electromechanical coupling coefficient on the energy release rate is significant. The strain energy density decreases with increment of the aspect radio of the ellipse and it is always positive for the cases discussed. The energy release rate, however, can be negative when both mechanical and fields are applied.     

Dynamic anti-plane shear of a cracked piezoelectric ceramic

The dynamic theory of antiplane piezoelectricity is applied to solve the problem of a line crack subjected to horizontally polarized shear waves in an arbitrary direction. The problem is formulated by means of integral transforms and reduced to the solution of a Fredholm integral equation of the second kind. The path-independent integral G is extended here to include piezoelectric effects, and is evaluated at the crack tip to obtain the dynamic energy release rate. Numerical calculations are carried out for the dynamic stress intensity factor and energy release rate. The material is piezoelectric ceramic.     

压电复合材料中正n边形孔边裂纹的反平面问题研究

本文基于Cauchy积分理论和Schwarz-Christoffel(SC)变换技术,针对压电复合材料中带一条裂纹的正n边形孔口缺陷的反平面断裂力学进行了探究.假设满足电不可通边界条件,利用Cauchy积分公式和留数定理,获得了任意正n边形裂尖处应力和电位移两个场强度因子以及全能量释放率的封闭形式的显式解.当正n边形边...     

功能梯度材料与均质材料交界面上Ⅰ-型裂纹对简谐动载的响应分析

在忽略界面裂尖端裂纹面相互叠入的条件下,对功能梯度材料与均质材料交界面上Ⅰ-型裂纹对简谐动载响应问题进行了分析。利用傅立叶变换,将问题的求解转换为对以裂纹面上位移差为未知函数的对偶积分方程的求解。为了求解对偶积分方程,将裂纹面上的位移差函数展开为雅可毕多项式的级数形式。最终给出了裂纹长度、入射波频率和材料性质对应力强度的影响。结果表明,当界面材料不连续时,获得了具有普通1/2奇异性的近似解。