Conjugated Polymers: Catalysts for Photocatalytic Hydrogen Evolution

Conjugated polymers, comprising fully π‐conjugated systems, present a new generation of heterogeneous photocatalysts for solar‐energy utilization. They have three key features, namely robustness, nontoxicity, and visible‐light activity, for photocatalytic processes, thus making them appealing candidates for scale‐up. Presented in this Minireview, is a brief summary on the recent development of various promising polymer photocatalysts for hydrogen evolution from aqueous solutions, including linear polymers, planarized polymers, triazine/heptazine polymers, and other related organic conjugated semiconductors, with a particular focus on the rational manipulation in the composition, architectures, and optical and electronic properties that are relevant to photophysical and photochemical properties. Some future trends and prospects for organic conjugated photocatalysts in artificial photosynthesis, by water splitting, are also envisaged.     

Regulating Charge-Transfer in Conjugated Microporous Polymers for Photocatalytic Hydrogen Evolution

Bandgap engineering in donor–acceptor conjugated microporous polymers (CMPs) is a potential way to increase the solar-energy harvesting towards photochemical water splitting. Here, the design and synthesis of a series of donor–acceptor CMPs [tetraphenylethylene (TPE) and 9-fluorenone (F) as the donor and the acceptor, respectively], F_0.1CMP , F_0.5CMP , and F_2.0CMP , are reported. These CMPs exhibited tunable bandgaps and photocatalytic hydrogen evolution from water. The donor–acceptor CMPs exhibited also intramolecular charge-transfer (ICT) absorption in the visible region (λ_max=480 nm) and their bandgap was finely tuned from 2.8 to 2.1 eV by increasing the 9-fluorenone content. Interestingly, they also showed emissions in the 540–580 nm range assisted by the energy transfer from the other TPE segments (not involved in charge-transfer interactions), as evidenced from fluorescence lifetime decay analysis. By increasing the 9-fluorenone content the emission color of the polymer was also tuned from green to red. Photocatalytic activities of the donor–acceptor CMPs ( F_0.1CMP , F_0.5CMP , and F_2.0CMP ) are greatly enhanced compared to the 9-fluorenone free polymer ( F_0.0CMP ), which is essentially due to improved visible-light absorption and low bandgap of donor–acceptor CMPs. Among all the polymers F_0.5CMP with an optimum bandgap (2.3 eV) showed the highest H₂ evolution under visible-light irradiation. Moreover, all polymers showed excellent dispersibility in organic solvents and easy coated on the solid substrates.     

Surface Engineering of Conjugated Polybenzothiadiazoles and Integration with Cobalt Oxides for Photocatalytic Water Oxidation

Conjugated polymers feature promising structure and properties for photocatalytic water splitting. Herein, a hydrolysis strategy was demonstrated to rationally modulate the surface hydrophilicity and band structures of conjugated poly-benzothiadiazoles. High hydrophilicity not only enhances the dispersions of polymeric solids in an aqueous solution but also reduces the absorption energy of water molecules. Besides, both theoretical and experimental results reveal that a more positive valence band potential is generated, which contributes to enhancing the photocatalytic water oxidation performance. Accordingly, the surface-modified conjugated polymers show largely promoted photocatalytic water oxidation activities by deposition of cobalt oxides as cocatalysts.     

An Elemental Phosphorus Photocatalyst with a Record High Hydrogen Evolution Efficiency

Semiconductive property of elementary substance is an interesting and attractive phenomenon. We obtain a breakthrough that fibrous phase red phosphorus, a recent discovered modification of red phosphorus by Ruck et al., can work as a semiconductor photocatalyst for visible‐light‐driven hydrogen (H₂) evolution. Small sized fibrous phosphorus is obtained by 1) loading it on photoinactive SiO₂ fibers or by 2) smashing it ultrasonically. They display the steady hydrogen evolution rates of 633 μmol h^?1 g^?1 and 684 μmol h^?1 g^?1, respectively. These values are much higher than previous amorphous P (0.6 μmol h^?1 g^?1) and Hittorf P (1.6 μmol h^?1 g^?1). Moreover, they are the highest records in the family of elemental photocatalysts to date. This discovery is helpful for further understanding the semiconductive property of elementary substance. It is also favorable for the development of elemental photocatalysts.     

钴、碳共掺杂氮化碳的制备及其光催化分解水产氢性能

针对氮化碳可见光利用率低和在光催化过程中光生电子与空穴易于复合的缺点,通过钴、碳共掺杂提升其光催化性能。以尿素为前驱体,维生素B12（VB12）为钴源和碳源,将二者的混合物进行一步煅烧,制备钴、碳共掺杂氮化碳（CNCoC）。结果表明,钴、碳共掺杂对氮化碳的微观形貌、骨架结构和官能团都没有造成明显影响;但是增大了产物的比表面积,调节了产物的能带结构,增加了其对可见光的吸收。更重要的是,相比于单一元素碳的掺杂,钴、碳共掺杂具有协同作用,能够更有效地提升光生电子和空穴的分离和传递效率。因此,加入6 mg VB12制备的CNCoC-6的可见光光催化分解水产氢速率达到了56.1 μmol·h^-1,是纯氮化碳（CN）的3.05倍;而碳掺杂氮化碳（CNC-6）的产氢速率仅为CN的2.55倍。     

Harvesting Solar Light with Crystalline Carbon Nitrides for Efficient Photocatalytic Hydrogen Evolution

Described herein is the photocatalytic hydrogen evolution using crystalline carbon nitrides (CNs) obtained by supramolecular aggregation followed by ionic melt polycondensation (IMP) using melamine and 2,4,6‐triaminopyrimidine as a dopant. The solid state NMR spectrum of ¹⁵N‐enriched CN confirms the triazine as a building unit. Controlling the amount and arrangements of dopants in the CN structure can dramatically enhance the photocatalytic performance for H₂ evolution. The polytriazine imide (PTI) exhibits the apparent quantum efficiency (AQE) of 15 % at 400 nm. This method successfully enables a substantial amount of visible light to be harvested for H₂ evolution, and provides a promising route for the rational design of a variety of highly active crystalline CN photocatalysts.     

烯烃连接的三嗪共轭多孔聚合物的合成及其可见光催化产氢性能

近年来,多孔有机光催化材料因其结构和能带易调控、比表面积大和密度小等优点而备受关注.本工作以Horner-Wadsworth-Emmons(HWE)反应为基础,使用有机碱(t-BuOK)作为催化剂,在室温下制备了两例C=C连接的三嗪共轭多孔聚合物,分别是由双取代的苯环和三甲基三嗪通过C=C键连接的结构(TB-CPN)和...     

Production of Hydrogen Peroxide by Photocatalytic Processes

Hydrogen peroxide (H₂O₂) has received increasing attention because it is not only a mild and environmentally friendly oxidant for organic synthesis and environmental remediation but also a promising new liquid fuel. The production of H₂O₂ by photocatalysis is a sustainable process, since it uses water and oxygen as the source materials and solar light as the energy. Encouraging processes have been developed in the last decade for the photocatalytic production of H₂O₂. In this Review we summarize research progress in the development of processes for the photocatalytic production of H₂O₂. After a brief introduction emphasizing the superiorities of the photocatalytic generation of H₂O₂, the basic principles of establishing an efficient photocatalytic system for generating H₂O₂ are discussed, highlighting the advanced photocatalysts used. This Review is concluded by a brief summary and outlook for future advances in this emerging research field.     

Methyllithium‐Doped Naphthyl‐Containing Conjugated Microporous Polymer with Enhanced Hydrogen Storage Performance

Hydrogen storage is a primary challenge for using hydrogen as a fuel. With ideal hydrogen storage kinetics, the weak binding strength of hydrogen to sorbents is the key barrier to obtain decent hydrogen storage performance. Here, we reported the rational synthesis of a methyllithium‐doped naphthyl‐containing conjugated microporous polymer with exceptional binding strength of hydrogen to the polymer guided by theoretical simulations. Meanwhile, the experimental results showed that isosteric heat can reach up to 8.4 kJ mol^?1 and the methyllithium‐doped naphthyl‐containing conjugated microporous polymer exhibited an enhanced hydrogen storage performance with 150 % enhancement compared with its counterpart naphthyl‐containing conjugated microporous polymer. These results indicate that this strategy provides a direction for design and synthesis of new materials that meet the US Department of Energy (DOE) hydrogen storage target.     

A Si Photocathode Protected and Activated with a Ti and Ni Composite Film for Solar Hydrogen Production

An efficient, stable and scalable hybrid photoelectrode for visible‐light‐driven H₂ generation in an aqueous pH 9.2 electrolyte solution is reported. The photocathode consists of a p‐type Si substrate layered with a Ti and Ni‐containing composite film, which acts as both a protection and electrocatalyst layer on the Si substrate. The film is prepared by the simple drop casting of the molecular single‐source precursor, [{Ti₂(OEt)₉(NiCl)}₂] (TiNi_pre), onto the p‐Si surface at room temperature, followed by cathodic in situ activation to form the catalytically active TiNi film (TiNi_cat). The p‐Si|TiNi_cat photocathode exhibits prolonged hydrogen generation with a stable photocurrent of approximately ?5 mA cm^?2 at 0 V vs. RHE in an aqueous pH 9.2 borate solution for several hours, and serves as a benchmark non‐noble photocathode for solar H₂ evolution that operates efficiently under neutral–alkaline conditions.     

Hydrophilic Conjugated Materials for Photocatalytic Hydrogen Evolution

Photocatalytic hydrogen evolution is viewed as a promising green strategy to utilize the inexhaustible solar energy and provide clean hydrogen fuels with zero‐emission characteristic. The nature of semiconductor‐based photocatalysts is the key point to achieve efficient photocatalytic hydrogen evolution. Conjugated materials have been recently emerging as a novel class of photocatalysts for hydrogen evolution and photocatalytic reactions due to their electronic properties can be well controlled via tailor‐made chemical structures. Hydrophilic conjugated materials, a subgroup of conjugated materials, possess multiple advantages for photocatalytic applications, thus spurring remarkable progress on both material realm and photocatalytic applications. This minireview aims to provide a brief review of the recent developments of hydrophilic conjugated polymers/small molecules for photocatalytic applications, and special concern on the rational molecular design and their impact on photocatalytic performance will be reviewed. Perspectives on the hydrophilic conjugated materials and challenges to their applications in the photocatalytic field are also presented.     

Enhanced Photoexcited Carrier Separation in Oxygen‐Doped ZnIn2S4 Nanosheets for Hydrogen Evolution

Limited by the relatively sluggish charge‐carrier separation in semiconductors, the photocatalytic performance is still far below what is expected. Herein, a model of ZnIn₂S₄ (ZIS) nanosheets with oxygen doping is put forward to obtain in‐depth understanding of the role that doping atoms play in photocatalysis. It shows enhanced photocatalytic activity compared with pristine ZIS. The electron dynamics analyzed by ultrafast transient absorption spectroscopy reveals that the average recovery lifetime of photoexcited electrons is increased by 1.53 times upon oxygen incorporation into the ZIS crystals, indicating enhanced separation of photoexcited carriers in oxygen‐doped ZIS nanosheets. As expected, the oxygen‐doped ZIS nanosheets show a remarkably improved photocatalytic activity with a hydrogen evolution rate of up to 2120 μmol h^?1 g^?1 under visible‐light irradiation, which is 4.5 times higher than that of the pristine ZIS nanosheets.     

Photoelectrochemical Hydrogen Production in Alkaline Solutions Using Cu2O Coated with Earth‐Abundant Hydrogen Evolution Catalysts

The splitting of water into hydrogen and oxygen molecules using sunlight is an attractive method for solar energy storage. Until now, photoelectrochemical hydrogen evolution is mostly studied in acidic solutions, in which the hydrogen evolution is more facile than in alkaline solutions. Herein, we report photoelectrochemical hydrogen production in alkaline solutions, which are more favorable than acidic solutions for the complementary oxygen evolution half‐reaction. We show for the first time that amorphous molybdenum sulfide is a highly active hydrogen evolution catalyst in basic medium. The amorphous molybdenum sulfide catalyst and a Ni–Mo catalyst are then deposited on surface‐protected cuprous oxide photocathodes to catalyze sunlight‐driven hydrogen production in 1 M KOH. The photocathodes give photocurrents of ?6.3 mA cm^?2 at the reversible hydrogen evolution potential, the highest yet reported for a metal oxide photocathode using an earth‐abundant hydrogen evolution reaction catalyst.     

Engineering the Atomic Interface with Single Platinum Atoms for Enhanced Photocatalytic Hydrogen Production

It is highly desirable but challenging to optimize the structure of photocatalysts at the atomic scale to facilitate the separation of electron–hole pairs for enhanced performance. Now, a highly efficient photocatalyst is formed by assembling single Pt atoms on a defective TiO₂ support (Pt₁/def‐TiO₂). Apart from being proton reduction sites, single Pt atoms promote the neighboring TiO₂ units to generate surface oxygen vacancies and form a Pt‐O‐Ti³⁺ atomic interface. Experimental results and density functional theory calculations demonstrate that the Pt‐O‐Ti³⁺ atomic interface effectively facilitates photogenerated electrons to transfer from Ti³⁺ defective sites to single Pt atoms, thereby enhancing the separation of electron–hole pairs. This unique structure makes Pt₁/def‐TiO₂ exhibit a record‐level photocatalytic hydrogen production performance with an unexpectedly high turnover frequency of 51423 h^?1, exceeding the Pt nanoparticle supported TiO₂ catalyst by a factor of 591.     

Enhancing Hydrogen Evolution Activity of Au(111) in Alkaline Media through Molecular Engineering of a 2D Polymer

The electrochemical splitting of water holds promise for the storage of energy produced intermittently by renewable energy sources. The evolution of hydrogen currently relies on the use of platinum as a catalyst—which is scarce and expensive—and ongoing research is focused towards finding cheaper alternatives. In this context, 2D polymers grown as single layers on surfaces have emerged as porous materials with tunable chemical and electronic structures that can be used for improving the catalytic activity of metal surfaces. Here, we use designed organic molecules to fabricate covalent 2D architectures by an Ullmann‐type coupling reaction on Au(111). The polymer‐patterned gold electrode exhibits a hydrogen evolution reaction activity up to three times higher than that of bare gold. Through rational design of the polymer on the molecular level we engineered hydrogen evolution activity by an approach that can be easily extended to other electrocatalytic reactions.