The elusive 16-electron Cp*M(NO)Me(2)(M = Mo, W) complexes and their spontaneous conversions to Cp*M(NMe)(O)Me isomers.

Treatment of [Cp*Mo(NO)Cl(mu-Cl)](2) with magnesium (Me(2)Mg.dioxane, MeMgCl) or aluminum (Me(3)Al) methylating reagents affords the known compound [Cp*Mo(NO)Me(mu-Cl)](2) (1). Similar treatment of the dichloro precursor with MeLi in ethereal solvents generates an equimolar mixture of 1 and the trimethyl "ate" complex, Cp*MoMe(3)(NO-Li(OEt(2)(n)), (2-Et(2)O). Reaction of 2-Et(2)O with a source of [Me](+) forms Cp*MoMe(3)(=N-OMe)(3), a rare terminal alkoxylimido complex. Metathesis of the chloro ligands of [Cp*Mo(NO)Cl(mu-Cl)](2) by MeLi in toluene at low temperatures produces the target dimethyl complex, Cp*Mo(NO)Me(2) (4), in 75% isolated yield. In solution, 4 is predominantly a monomeric species, whereas in the solid state it adopts a dimeric or oligomeric structure containing isonitrosyl bridges as indicated by IR and (15)N/(13)C NMR spectroscopies. Hydrolysis of 4 affords meso- and rac-[Cp*Mo(NO)Me](2)(mu-O) (5), and the reactions of 4 with a range of Lewis bases, L, to form the 18e adducts Cp*Mo(NO)(L)Me(2) (e.g., Cp*Mo(NO)(PMe(3))Me(2) (7)), have established it to be the most electrophilic complex of its family. Acidolysis of the methyl groups of 4 is also facile. Most notably, 4 is thermally unstable in solution and undergoes isomerization via nitrosyl N-O bond cleavage to its oxo(imido) form, Cp*Mo(NMe)(O)Me (11), which is isolable from the final reaction mixture as the mu-oxo-bridged adduct formed by 4 and 11, i.e., Cp*Mo(NO)Me(2)(mu-O)Cp*Mo(NMe)Me (4 <-- 11). The rate of this isomerization is significantly faster for the tungsten dimethyl complex; hence, Cp*W(NO)Me(2) (12) is not isolable free of a supporting donor interaction and can only be isolated as Cp*W(NO)Me(2)(mu-O)Cp*W(NMe)Me (12 <-- 13) or Cp*W(NO)Me(2)(PMe(3)) (14) adducts.     

M-P versus M=M bonds as protonation sites in the organophosphide-bridged complexes [M2Cp2(mu-PR2)(mu-PR'2)(CO)2], (M = Mo, W; R, R' = Ph, Et, Cy)

The unsaturated complexes [W2Cp2(mu-PR2)(mu-PR'2)(CO)2] (Cp = eta5-C5H5; R = R' = Ph, Et; R = Et, R' = Ph) react with HBF4.OEt2 at 243 K in dichloromethane solution to give the corresponding complexes [W2Cp2(H)(mu-PR2)(mu-PR'2)(CO)2]BF4, which contain a terminal hydride ligand. The latter rearrange at room temperature to give [W2Cp2(mu-H)(mu-PR2)(mu-PR'2)(CO)2]BF4, which display a bridging hydride and carbonyl ligands arranged parallel to each other (W-W = 2.7589(8) A when R = R' = Ph). This explains why the removal of a proton from the latter gives first the unstable isomer cis-[W2Cp2(mu-PPh2)2(CO)2]. The molybdenum complex [Mo2Cp2(mu-PPh2)2(CO)2] behaves similarly, and thus the thermally unstable new complexes [Mo2Cp2(H)(mu-PPh2)2(CO)2]BF4 and cis-[Mo2Cp2(mu-PPh2)2(CO)2] could be characterized. In contrast, related dimolybdenum complexes having electron-rich phosphide ligands behave differently. Thus, the complexes [Mo2Cp2(mu-PR2)2(CO)2] (R = Cy, Et) react with HBF4.OEt2 to give first the agostic type phosphine-bridged complexes [Mo2Cp2(mu-PR2)(mu-kappa2-HPR2)(CO)2]BF4 (Mo-Mo = 2.748(4) A for R = Cy). These complexes experience intramolecular exchange of the agostic H atom between the two inequivalent P positions and at room-temperature reach a proton-catalyzed equilibrium with their hydride-bridged tautomers [ratio agostic/hydride = 10 (R = Cy), 30 (R = Et)]. The mixed-phosphide complex [Mo2Cp2(mu-PCy2)(mu-PPh2)(CO)2] behaves similarly, except that protonation now occurs specifically at the dicyclohexylphosphide ligand [ratio agostic/hydride = 0.5]. The reaction of the agostic complex [Mo2Cp2(mu-PCy2)(mu-kappa2-HPCy2)(CO)2]BF4 with CN(t)Bu gave mono- or disubstituted hydride derivatives [Mo2Cp2(mu-H)(mu-PCy2)2(CO)2-x(CNtBu)x]BF4 (Mo-Mo = 2.7901(7) A for x = 1). The photochemical removal of a CO ligand from the agostic complex also gives a hydride derivative, the triply bonded complex [Mo2Cp2(H)(mu-PCy2)2(CO)]BF4 (Mo-Mo = 2.537(2) A). Protonation of [Mo2Cp2(mu-PCy2)2(mu-CO)] gives the hydroxycarbyne derivative [Mo2Cp2(mu-COH)(mu-PCy2)2]BF4, which does not transform into its hydride isomer.     

Synthesis, structure and characterization of M---Sn (M=Mo, W) bonded heterobimetallic complexes containing bis(pyrazol-1-yl)methane ligands

The reaction of bis(pyrazol-1-yl)methane tetracarbonylmolybdenum(0) or tungsten(0) complexes with RSnCl₃ (R=Ph, Cl) at room temperature yielded heterobimetallic complexes CH₂(Pz)₂M(CO)₃(Cl)(SnCl₂R) (Pz represents substituted pyrazole; M=Mo or W; R=Ph or Cl) in good yields, which have been characterized by elemental analysis, ¹H NMR and IR spectroscopy. The reaction of bis(3,5-dimethyl-4-halopyrazol-1-yl)methane tetracarbonyl tungsten with PhSnCl₃ did not take place even in refluxing CH₂Cl₂. The electronic and steric characteristics of substituents on the pyrazole ring remarkably influence the structures of the products. The structures of CH₂(3,5-Me₂-4-BrPz)₂W(CO)₃(Cl)(SnCl₃) (8) and CH₂(4-BrPz)₂Mo(CO)₃(μ-Cl)(SnCl₂Ph) (17) (Pz: pyrazole) determined by X-ray crystallography show that no chlorine-bridged W---Sn bond is observed in complex 8, while one chlorine-bridged Mo---Sn bond exists in complex 17. The Sn---M bond length is 2.7438(5) Å in complex 8 (W---Sn) and 2.7559(4) Å in complex 17 (Mo---Sn).     

Synthesis and reactions of group 6 metal half-sandwich complexes of 2,2-dicyanoethylene-1,1-dichalcogenolates [(Cp*)M[E(2)C=C(CN)(2)](2)]-(M = Mo,W; E = S,Se)

A series of group 6 transition metal half-sandwich complexes with 1,1-dichalcogenide ligands have been prepared by the reactions of Cp*MCl(4)(Cp* = eta(5)-C(5)Me(5); M = Mo, W) with the potassium salt of 2,2-dicyanoethylene-1,1-dithiolate, (KS)(2)C=C(CN)(2) (K(2)-i-mnt), or the analogous seleno compound, (KSe)(2)C=C(CN)(2) (K(2)-i-mns). The reaction of Cp*MCl(4) with (KS)(2)C=C(CN)(2) in a 1:3 molar ratio in CH(3)CN gave rise to K[Cp*M(S(2)C=C(CN)(2))(2)] (M = Mo, 1a, 74%; M = W, 2a, 46%). Under the same conditions, the reaction of Cp*MoCl(4) with 3 equiv of (KSe)(2)C=C(CN)(2) afforded K[Cp*Mo(Se(2)C=C(CN)(2))(2)] (3a) and K[Cp*Mo(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))] (4) in respective yields of 45% and 25%. Cation exchange reactions of 1a, 2a, and 3a with Et(4)NBr resulted in isolation of (Et(4)N)[Cp*Mo(S(2)C=C(CN)(2))(2)] (1b), (Et(4)N)[Cp*W(S(2)C=C(CN)(2))(2)] (2b), and (Et(4)N)[Cp*Mo(Se(2)C=C(CN)(2))(2)] (3b), respectively. Complex 4 crystallized with one THF and one CH(3)CN molecule as a three-dimensional network structure. Inspection of the reaction of Cp*WCl(4) with (KSe)(2)C=C(CN)(2) by ESI-MS revealed the existence of three species in CH(3)CN, [Cp*W(Se(2)C=C(CN)(2))(2)]-, [Cp*W(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))]-, and [Cp*W(Se(Se(2))C=C(CN)(2))(2)]-, of which [Cp*W(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))]-(5) was isolated as the main product. Treatment of 2a with 1/4 equiv of S(8) in refluxing THF resulted in sulfur insertion and gave rise to K[Cp*W(S(2)C=C(CN)(2))(S(S(2))C=C(CN)(2))](6), which crystallized with two THF molecules forming a three-dimensional network structure. 6 can also be prepared by refluxing 2a with 1/4 equiv of S(8) in THF. 3a readily added one Se atom upon treatment with 1 mol of Se powder in THF to give 4 in high yield, while the treatment of 3a or 4 with 2 equiv of Na(2)Se in THF led to formation of a dinuclear complex [(Cp*Mo)(2)(mu-Se)(mu-Se(Se(3))C=C(CN)(2))] (7). The structure of 7 consists of two Cp*Mo units bridged by a Se(2-) and a [Se(Se(3))C=C(CN)(2)](2-) ligand in which the triselenido group is arranged in a nearly linear way (163 degrees). The reaction of 2a with 2 equiv of CuBr in CH(3)CN yielded a trinuclear complex [Cp*WCu(2)(mu-Br)(mu(3)-S(2)C=C(CN)(2))(2)] (8), which crystallized with one CH(3)CN and generated a one-dimensional chain polymer through bonding of Cu to the N of the cyano groups.     

Nitrosyl Complexes 6.Reactions of Na[Fe(CO)_3NO]with Cp~*M(CO)_3Cl(Cp~*=η~5-CH_3C_5H_4,M=Mo or W):Crystal structures of Cp~*M(CO)_2NO and Cp~*M(μ_3-NH)(μ_2-NO)(μ_2-CO)Fe_2(CO)_6

Sodium nitrosylcarbonyliron reacts with methylcyclopentadienylcarbonylmetal(Mo orW)chloride in CH_3OH/THF at room temperature to give CpMo(CO)_2NO(1a)(Cp=η~5-CH_3C_5H_4)or CpW(CO)_2NO(1b),[CpMo(CO)_3]_2(2a)or[CpW(CO)_3]_2(2b),and CpMo(μ3-NH)(μ2-NO)-(μ2-CO)Fe_2(CO)_6(3a)or CpW(μ3-NH)(μ2-NO)(μ2-CO)Fe_2(CO)_6(3b),respectively.Complexes1a,1b,3a and 3b were analyzed by IR,NMR,MS and elemental analyses,and the crystalstructures of 1b,3a and 3b were determined by X-ray diffraction method.The new clusters 3aand 3b have μ3-NH ligands which were formed by redaction of NO in the synthetic reactions.     

Metal germylyne complexes [Mtbd1;Ge-R] and metallogermylenes [M-Ge-R]: DFT analysis of the systems [(Cp)(CO)(n)()Mtbd1;GeMe] (M = Cr,Mo, W,Fe(2+), n = 2; M = Fe,n = 1) and [(Cp)(CO)(n)()M-GeMe] (M = Cr,Mo, W,n = 3; M = Fe,n = 2)

Quantum chemical calculations at the gradient corrected DFT level using the exchange correlation functionals BP86 and B3LYP of the geometries of the title compounds are reported. The theoretically predicted bond lengths and angles of the model compounds are in excellent agreement with experiment. The nature of the metal-ligand interactions is quantitatively analyzed with an energy decomposition method. The analysis of the electronic structure of the neutral metal germylyne complexes Ia-Id and the metallogermylenes IIa-IId shows that the former compounds have about the same degree of electrostatic and covalent bonding, while the relative strength of the covalent contributions in the latter molecules is lower (41-42%) than the electrostatic attraction (58-59%). The a' '(pi) bonding contribution in the group-6 germylyne complexes Ia-Ic is rather high (42% of the orbital interactions). In the iron complex Id, it is even higher (53.8%) than the sigma bonding. The pi bonding contributions to the covalent bonding become much less (18-20%) in the metallogermylenes IIa-IId.     

Electronic effects of (N2S2)M(NO) complexes (M = Fe, Co) as metallodithiolate ligands

Heterobimetallic complexes comprised of W(CO)4 adducts of (N2S2)M(NO) have been isolated and characterized by nu(CO) and nu(NO)IR spectroscopies and X-ray diffraction. The molecular structures of (N2S2)M(NO) compounds (bme-dach)Co(NO), [(bme-dach)Co(NO)]W(CO)4, and [(bme-dach)Fe(NO)]W(CO)4 [bme-dach = N, N'-bis(2-mercaptoethyl)-1,4-diazacycloheptane)] find the square-pyramidal (bme-dach)M(NO) unit to serve as a bidentate ligand via the cis-dithiolato sulfurs, with a hinge angle of the butterfly bimetallic structures of ca. 130 degrees . The W(CO)4 moiety is used as a probe of the electron-donor ability of the nitrosyl complexes through CO stretching frequencies that display a minor increase as compared to analogous [(N2S2)Ni]W(CO)4 complexes. These findings are consistent with the electron-withdrawing influence of the {Co(NO)}(8) and {Fe(NO)}(7) units on the bridging thiolate sulfurs relative to Ni(2+). Also sensitive to derivatization by W(CO)4 is the NO stretch, which blue shifts by ca. 30 and 50 cm(-1) for the Co and Fe complexes, respectively. Cyclic voltammetry studies find similar reduction potentials (-1.08 V vs NHE in N, N-dimethylformamide solvent) of the (bme-dach)Co(NO) and (bme-dach)Fe(NO) free metalloligands, which are positively shifted by ca. 0.61 and 0.48 V, respectively, upon complexation to W(CO)4.     

Synthesis and characterization of bis-isonitrile complexes Cp2M(CNR)2 (M = Ti,Zr; R = 2,6-dimethylphenyl)

Bis-isonitrile complexes Cp₂M(CNR)₂ (M  Ti, Zr), where RNC is the sterically hindered 2,6-dimethylphenyl isonitrile, can be prepared in high yield by reduction of Cp₂MCl₂ with magnesium in THF solution in the presence of the isonitrile. ¹H NMR spectroscopy reveals that with the titanium complex dissociation of the isonitrile ligands takes place in solution.     

Bimetallic M(V)(2)Cu(II)(3) (M = Mo, W) coordination complexes based on octacyanometalates: structures and magnetic variations tuned by chelated tetradentate macrocyclic ligands

Four octacyanometalate-based bimetallic Cu-M (M = Mo, W) assemblies coordinated by tetradentate macrocyclic ligands were prepared via self-assembly process in a stoichiometric ratio of [M(CN)8]3- and Cu(macrocycle)2+ and characterized in terms of structures and magnetic properties. The crystal structures are varied depending on the macrocycles used. The employment of cyclam with no pendant groups produced a one-dimensional chain (1) with a rope-ladder pattern, whereas macrocycles with side groups allowed for the formation of two-dimensional honeycomb-like architectures (2-4). From the crystal structures, the variations in apical Cu-Nax lengths and Cu-Nax-Cax angles on the bridging pathways are observed, which arises from the existence of side groups on macrocyclic ligands. The magnetic results reveal that all of the prepared compounds show ferromagnetic couplings between magnetic centers transimitted through CN bridges under the present structural parameters. Comparing the magnetic strength of the Cu-Mo (3d-4d; 2) and Cu-W (3d-5d; 3) complexes supports that 3d-5d magnetic coupling is stronger than 3d-4d because the 5d orbital is more diffuse than 4d. The magnetic analyses for 1-4 and related complexes tentatively suggest that, when the Cu-Nax distances are long enough, the axial Cu-Nax bond length in the bridging route may be one of the major structural parameters to determine the magnitude of the ferromagnetic exchange coupling.     

Reaction of [M(eta3-allyl)(eta2-amidinato)(CO)2(pyridine)] complexes (M = Mo, W) with bidentate ligands: nitrogen donor vs. phosphorus donor

The reactivity of amidinato complexes of molybdenum and tungsten bearing pyridine as a labile ligand, [M(eta(3)-allyl)(eta(2)-amidinato)(CO)(2)(pyridine)](M = Mo; 1-Mo, M = W; 1-W), toward bidentate ligands such as 1,10-phenanthroline (phen) and 1,2-bis(diphenylphosphino)ethane (dppe) was investigated. The reaction of 1 with phen at ambient temperature resulted in the formation of monodentate amidinato complexes, [M(eta(3)-allyl)(eta(1)-amidinato)(CO)(2)(eta(2)-phen)](M = Mo; 2-Mo, M = W; 2-W), which has pseudo-octahedral geometry with the amidinato ligand coordinated to the metal in an eta(1)-fashion. The phen ligand was located coplanar with two CO ligands and the eta(1)-amidinato ligand was positioned trans to the eta(3)-allyl ligand. In solution, both complexes 2-Mo and 2-W showed fluxionality, and complex 2-Mo afforded allylamidine (3) on heating in solution. In the reaction of 1 with dppe at ambient temperature, the simple substitution reaction took place to give dppe-bridged binuclear complexes [{M(eta(3)-allyl)(eta(2)-amidinato)(CO)(2)}(2)(mu-dppe)](M = Mo; 5-Mo, M = W; 5-W), whereas mononuclear monocarbonyl complexes [M(eta(3)-allyl)(eta(2)-amidinato)(CO)(eta(2)-dppe)](M = Mo; 6-Mo, M = W; 6-W) were obtained under acetonitrile- or toluene-refluxing conditions. Mononuclear complex 6 was also obtained by the reaction of binuclear complex 5 with 0.5 equivalents of dppe under refluxing in acetonitrile or in toluene. The X-ray analyses and variable-temperature (31)P NMR spectroscopy of complex 6 indicated the existence of the rotational isomers of the eta(3)-allyl ligand, i.e., endo and exo forms, with respect to the carbonyl ligand. The different reactivity of complex 1 toward phen and dppe seems to have come from the difference in the pi-acceptability of each bidentate ligand.     

Synthesis and structure of W(eta(2)-mp)(2)(CO)(3) (mp = monoanion of 2-mercaptopyridine) and its reactions with 2,2'-pyridine disulfide and/or NO to yield W(eta(2)-mp)(4), W(eta(2)-mp)(2)(NO)(2), and W(eta(2)-mp)(3)(NO)

Oxidative addition of the sulfur-sulfur bond of 2,2'-pyridine disulfide (C(5)H(4)NS-SC(5)H(4)N) with L(3)W(CO)(3) [L = pyridine, (1)/(3)CHPT; CHPT = cycloheptatriene] in methylene chloride solution yields the seven-coordinate W(II) thiolate complex W(eta(2)-mp)(2)(CO)(3) (mp = monoanion of 2-mercaptopyridine). This complex undergoes slow further oxidative addition with additional pyridine disulfide, yielding W(eta(2)- mp)(4). Reaction of W(eta(2)-mp)(2)(CO)(3) with NO results in quantitative formation of the six-coordinate W(0) complex W(eta(2)-mp)(2)(NO)(2). Reaction of W(eta(2)-mp)(2)(CO)(3) with NO in the presence of added pyridine disulfide yields the seven-coordinate W(II) nitrosyl complex W(eta(2)-mp)(3)(NO) as well as W(eta(2)-mp)(2)(NO)(2) and trace amounts of W(eta(2)-mp)(4). The complex W(eta(2)-mp)(3)(NO) is formed during the course of the reaction and not by reaction of W(eta(2)-mp)(4) or W(eta(2)-mp)(2)(NO)(2) with NO under these conditions. The crystal structures of W(eta(2)- mp)(2)(CO)(3), W(eta(2)-mp)(2)(NO)(2), and W(eta(2)-mp)(3)(NO) are reported.     

Reactions of Cp2MCl2 (M=Ti or Zr) with imine-oxime ligands. Formation of metallacycles

The reactions of bis(cyclopentadienyl)titanium(IV)/zirconium(IV) dichloride with a series of imine-oxime ligands (LH2), derived by condensing benzil-alpha-monoxime and 2-phenylenediamine, 4-phenylenediamine, 4-methyl-2-phenylenediamine, 2,6-diamino-pyridine, have been studied in anhydrous tetrahydrofuran in the presence of base and metallocycles of the [Cp2M(L)] (M=Ti or Zr) type have been isolated. Tentative structures have been proposed for the products based on elemental analysis, electrical conductance and spectral (electronic, IR and (1)H-NMR) data. Proton NMR spectra indicate that on the NMR time scale there is rapid rotation of the cyclopentadienyl ring around the metal-ring axis at 25 degrees C. Studies were conducted to assess the growth inhibiting potential of the complexes synthesized and the ligands against various bacterial strains.     

Hydrogen bonding and proton transfer involving the trihydride complexes Cp*M(dppe)H3 (M = Mo,W) and fluorinated alcohols: the competitive role of the hydride ligands and metal

The protonation of complexes Cp*M(dppe)H₃ (dppe is ethylenebis(diphenylphosphine), M = Mo (1), W (2)) by a variety of fluorinated alcohols of different acid strength (FCH₂CH₂OH, CF₃CH₂OH, (CF₃)₂CHOH, and (CF₃)₃COH) was investigated experimentally by the variable temperature spectroscopic methods (IR, NMR) and stopped-flow technique (UV-Vis). The structures of the hydrogen-bonded and proton transfer products were studied by DFT calculations. In agreement with the calculation results, the IR data suggest that the initial hydrogen bond is established with a hydride site for complex 1 and with the metal site for complex 2. However, no intermediate dihydrogen complex found theoretically was detected experimentally on the way to the final classical tetrahydride product.     

Linear versus bent bonding in metal-phosphinidene complexes: Theoretical studies of the electrophilic phosphinidene complexes [(Cp)(CO)2MPMe)], [(Cp)(CO)3MPMe)] (M = Cr, Mo, W)

Density functional theory calculations have been performed for the title phosphinidene complexes using the exchange correlation functionals BP86 and B3LYP. The optimized bond lengths and angles of the model compounds are in excellent agreement with experiment. The M-P bond lengths in linear phosphinidene complexes correspond to a Pauling bond order of ∼ 3. The bent geometries at phosphorus in the bent metal phosphinidene complexes are consistent with the presence of a trivalent phosphorus(III) center which is singly bonded to carbon and doubly bonded to transition metal. The analysis of the delocalized Kohn-Sham orbitals shows the polarization of the M-P σ bonding orbitals towards the phosphorus atom in the MPMe bonds, while in the MPMe bond, the contributions of metal and phosphorus are almost the same. In the linear phosphinidene complexes the contributions of the covalent bonding ΔE_orb are more than the electrostatic interaction ΔE_elstat. The bent phosphinidene complexes have a lower degree of covalent bonding than the linear phosphinidene complexes. The major differences between the linear and bent phosphinidene complexes are found in the degree of π-bonding. The MPMe bonds show a true M-P π bond and a deviated π bond due to slight bent M-P-C bond angles. The MPMe bonds show a true M-P π bond and a lone-pair on phosphorus.     

Low-lying electronic states of M(3)O(9)(-) and M(3)O(9)(2-) (M = Mo, W)

Multiple low-lying electronic states of M(3)O(9)(-) and M(3)O(9)(2-) (M = Mo, W) arise from the occupation of the near-degenerate low-lying virtual orbitals in the neutral clusters. We used density functional theory (DFT) and coupled cluster theory (CCSD(T)) with correlation consistent basis sets to study the structures and energetics of the electronic states of these anions. The adiabatic and vertical electron detachment energies (ADEs and VDEs) of the anionic clusters were calculated with 27 exchange-correlation functionals including one local spin density approximation functional, 13 generalized gradient approximation (GGA) functionals, and 13 hybrid GGA functionals, as well as the CCSD(T) method. For M(3)O(9)(-), CCSD(T) and nearly all of the DFT exchange-correlation functionals studied predict the (2)A(1) state arising from the Jahn-Teller distortion due to singly occupying the degenerate e' orbital to be lower in energy than the (2)A(1)' state arising from singly occupying the nondegenerate a(1)' orbital. For W(3)O(9)(-), the (2)A(1) state was predicted to have essentially the same energy as the (2)A(1)' state at the CCSD(T) level with core-valence correlation corrections included and to be higher in energy or essentially isoenergetic with most DFT methods. The calculated VDEs from the CCSD(T) method are in reasonable agreement with the experimental values for both electronic states if estimates for the corrections due to basis set incompleteness are included. For M(3)O(9)(2-), the singlet state arising from doubly occupying the nondegenerate a(1)' orbital was predicted to be the most stable state for both M = Mo and W. However, whereas M(3)O(9)(2-) was predicted to be less stable than M(3)O(9)(-), W(3)O(9)(2-) was predicted to be more stable than W(3)O(9)(-).     

新型含钌异核过渡金属簇合物的合成及其结构表征

利用金属交换法合成了四个新的含钌手性过渡金属簇合物［ＭＲｕＣｏ（ＣＯ）_８（μ_３－Ｓｅ）［η_５－Ｃ_５Ｈ_４Ｃ（Ｏ）Ｒ｝］（ １ Ｍ＝ Ｍｏ, Ｒ＝ ＯＥｔ; ２ Ｍ＝ Ｗ, Ｒ＝ ＯＥｔ; ３ Ｍ＝ Ｍｏ, Ｒ＝ ＣＨ_２ＣＨ_２ＣＯＯＭｅ; ４ Ｍ＝ Ｗ, Ｒ＝ ＣＨ_２ＣＨ_２ＣＯＯＭｅ）,并用红外、核磁、元素分析测试结果进行表征,对簇合物１进行了单晶结构测定,晶体属单斜晶系,Ｐ２_１／ｎ空间群,晶胞参数ａ＝１０．１６８（２）Ａ,ｂ＝９．０１８（２）Ａ,ｃ＝２３．１２１（３）Ａ,β＝９２．５０（１）°,Ｚ＝４。     

混合价簇合物[Et4N]2{(CO)4M}xM'S4][x=1,2; M=Mo(0)或W(0); M'=Mo(VI)或W(VI)]的共振Raman光谱及IR光谱研究

研究了[{CO)4M}xM'S4]^2^-[x=1,2; M=Mo(0), W(0); M'=Mo(VI), W(VI)]系列簇合物共振Raman(RR)光谱及红外(IR)光谱。除了对^νc-o, ^νM(VI)-s(b)[S(b):桥基S], ^νM(VI)-s(t)[S(t): 端基S], ^νM(0)-c, ^δM(0)-c-o进行归属外, 着重讨论^νM(0)-s(b), ^νM(0)-M(VI)的归属。研究了IR谱中Δν[^νM(VI)-s(b)─^νM(0)-s(b)]与M(0)→M(VI)电荷迁移的关系。RR谱研究结果表明, 在[(CO)4^-MS2MoS2]^2^-, [(CO)4MoS2MoS2Mo(CO)4]^2^-中S(b)→M(0)电荷迁移与M(0)→Mo(VI)电荷迁移之间有较明显的相互偶合; 在[(CO)4MS2WS2]^2^-中S(b)→W(VI)与M(0)→W(VI)电荷迁移、S(t)→W(VI)与M(0)→W(VI)电荷迁移之间也分别存在明显的相互偶合, 说明了它们存在强的电子离域。本系列簇合物中二核簇的电子离域程度比三核簇强。     

Synthesis,characterization, and solution redox properties of (trimpsi)M(CO)(2)(NO) complexes [M = V,Nb, Ta; trimpsi = (t)BuSi(CH(2)PMe(2))(3)

Treatment of [Et(4)N][M(CO)(6)] (M = Nb, Ta) with I(2) in DME at -78 degrees C produces solutions of the bimetallic anions [M(2micro-I)(3)(CO)(8)](-). Addition of the tripodal phosphine (t)BuSi(CH(2)PMe(2))(3) (trimpsi) followed by refluxing affords (trimpsi)M(CO)(3)I [M = Nb (1), Ta (2)], which are isolable in good yields as air-stable, orange-red microcrystalline solids. Reduction of these complexes with 2 equiv of Na/Hg, followed by treatment with Diazald in THF, results in the formation of (trimpsi)M(CO)(2)(NO) [M = Nb (3), Ta (4)] in high isolated yields. The congeneric vanadium complex, (trimpsi)V(CO)(2)(NO) (5), can be prepared by reacting [Et(4)N][V(CO)(6)] with [NO][BF(4)] in CH(2)Cl(2) to form V(CO)(5)(NO). These solutions are treated with 1 equiv of trimpsi to obtain (eta(2)-trimpsi)V(CO)(3)(NO). Refluxing orange THF solutions of this material affords 5 in moderate yields. Reaction of (trimpsi)VCl(3)(THF) (6) with 4 equiv of sodium naphthalenide in THF in the presence of excess CO provides [Et(4)N][(trimpsi)V(CO)(3)] (7), (trimpsi)V(CO)(3)H, and [(trimpsi)V(micro-Cl)(3)V(trimpsi)][(eta(2)-trimpsi)V(CO)(4)].3THF ([8][9].3THF). All new complexes have been characterized by conventional spectroscopic methods, and the solid-state molecular structures of 2.(1)/(2)THF, 3-5, and [8][9].3THF have been established by X-ray diffraction analyses. The solution redox properties of 3-5 have also been investigated by cyclic voltammetry. Cyclic voltammograms of 3 and 4 both exhibit an irreversible oxidation feature in CH(2)Cl(2) (E(p,a) = -0.71 V at 0.5 V/s for 3, while E(p,a) = -0.55 V at 0.5 V/s for 4), while cyclic voltammograms of 5 in CH(2)Cl(2) show a reversible oxidation feature (E(1/2) = -0.74 V) followed by an irreversible feature (0.61 V at 0.5 V/s). The reversible feature corresponds to the formation of the 17e cation [(trimpsi)V(CO)(2)(NO)](+) ([5](+)()), and the irreversible feature likely involves the oxidation of [5](+)() to an unstable 16e dication. Treatment of 5 with [Cp(2)Fe][BF(4)] in CH(2)Cl(2) generates [5][BF(4)], which slowly decomposes once formed. Nevertheless, [5][BF(4)] has been characterized by IR and ESR spectroscopies.