Cobalt‐mediated radical polymerization routes to poly(vinyl ester) block copolymers

Cobalt‐mediated radical polymerizations (CMRPs) utilizing redox initiation are demonstrated to produce poly(vinyl ester) homopolymers derived from vinyl pivalate (VPv) and vinyl benzoate (VBz), and their block copolymers with vinyl acetate (VAc). Combining anhydrous Co(acac)₂, lauroyl peroxide, citric acid trisodium salt, and VPv at 30 °C results in controlled polymerizations that yield homopolymers with M_n = 2.5–27 kg/mol with M_w/M_n = 1.20–1.30. Homopolymerizations of scrupulously purified VBz proceed with lower levels of control as evidenced by broader polydispersities over a range of molecular weights (M_n = 4–16 kg/mol; M_w/M_n = 1.34–1.65), which may be interpreted in terms of the decreased nucleophilicity of these less electron donating propagating polymer chain ends. Based on these results, we demonstrate that sequential CMRP reactions present a viable route to microphase separated poly(vinyl ester) block copolymers as shown by small‐angle X‐ray scattering analyses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of poly(vinyl acetate)‐graft‐polystyrene by a combination of cobalt‐mediated radical polymerization and atom transfer radical polymerization

Vinyl acetate and vinyl chloroacetate were copolymerized in the presence of a bis(trifluoro‐2,4‐pentanedionato)cobalt(II) complex and 2,2′‐azobis(4‐methoxy‐2,4‐dimethylvaleronitrile) at 30 °C, forming a cobalt‐capped poly(vinyl acetate‐co‐vinyl chloroacetate). The addition of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy after a certain degree of copolymerization was reached afforded 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐terminated poly(vinyl acetate‐co‐vinyl chloroacetate) (PVOAc–MI; number‐average molecular weight = 31,000, weight‐average molecular weight/number‐average molecular weight = 1.24). A ¹H NMR study of the resulting PVOAc–MI revealed quantitative terminal 2,2,6,6‐tetramethyl‐1‐piperidinyloxy functionality and the presence of 5.5 mol % vinyl chloroacetate in the copolymer. The atom transfer radical polymerization (ATRP) of styrene (St) was studied with ethyl chloroacetate as a model initiator and five different Cu‐based catalysts. Catalysts with bis(2‐pyridylmethyl)octadecylamine (BPMODA) or tris(2‐pyridylmethyl)amine (TPMA) ligands provided the highest initiation efficiency and best control over the polymerization of St. The grafting‐from ATRP of St from PVOAc–MI catalyzed by copper complexes with BPMODA or TPMA ligands provided poly(vinyl acetate)‐graft‐polystyrene copolymers with relatively high polydispersity (>1.5) because of intermolecular coupling between growing polystyrene (PSt) grafts. After the hydrolysis of the graft copolymers, the cleaved PSt side chains had a monomodal molecular weight distribution with some tailing toward the lower number‐average molecular weight region because of termination. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 447–459, 2007     

Nitroxide mediated living radical polymerization of styrene onto poly (vinyl chloride)

Nitroxide‐mediated ‘living’ free radical polymerisation (LREP) was employed for the first time to prepare graft copolymer by having arylated poly (vinyl chloride) (PVC‐Ph) as a backbone and polystyrene (PS) as branches. The graft copolymerization of styrene was initiated by arylated PVC carrying 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) groups as a macroinitiator. Thus, the arylated PVC was prepared in the mild conditions and these reaction conditions could overcome the problem of gelation and crosslinking in polymers. Then, 1‐hydroxy TEMPO was synthesized by the reduction of TEMPO with sodium ascorbate. This functional nitroxyl compound was coupled with brominated arylated PVC (PVC‐Ph‐Br). The resulting macro‐initiator (PVC‐Ph‐TEMPO) for ‘living’ free radical polymerization was then heated in the presence of styrene to form graft copolymer. DSC, GPC, ¹HNMR, and FT‐IR spectroscopy were employed to investigate the structure of the polymers. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of high glass transition temperature copolymers based on poly(vinyl chloride) via single electron transfer—Degenerative chain transfer mediated living radical polymerization (SET‐DTLRP) of vinyl chloride in water

α,ω‐di(iodo) poly(isobornyl acrylate) macroiniators (α,ω‐di(iodo)PIA) with number average molecular weight from M _n,TriSEC = 11,456 to M _n,TriSEC = 94,361 were synthesized by single electron transfer‐degenerative chain transfer mediated living radical polymerization (SET‐DTLRP) of isobornyl acrylate (IA) initiated with iodoform (CHI₃) and catalyzed by sodium dithionite (Na₂S₂O₄) in water at 35 °C. The plots of number average molecular weight vs conversion and ln{[M]₀/[M]} vs time are linear, indicating a controlled polymerization. α,ω‐di(iodo) poly(isobornyl acrylate) have been used as a macroinitiator for the SET‐DTLRP of vinyl chloride (VCM) leading to high T_g block copolymers PVC‐b‐PIA‐b‐PVC. The dynamic mechanical thermal analysis of the block copolymers suggests just one phase indicating that copolymer behaves as a single material. This technology provides the possibility of synthesizing materials based on PVC with higher T_g in aqueous medium. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Seleno‐containing poly(vinyl acetate) prepared by diselenocarbonates‐mediated controlled free radical polymerizations

The living free radical polymerizations of vinyl acetate (VAc) were successfully achieved in the presence of a novel organic selenium compound (diselenocarbonates), with 2,2′‐azobisisobutyronitrile (AIBN) as the initiator. The living characteristics of the VAc polymerization were confirmed by the linear first‐order kinetic plots and linear increase of molecular weights (M_n) of the polymers with monomer conversions, while keeping the relatively low molecular weight distributions. In addition, the end of the polymers contains selenium element which may be useful in biotechnological and biomedical applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3159–3165     

Reversible addition‐fragmentation chain transfer polymerization of vinyl acetate under high pressure

In this work, high molecular weight polyvinyl acetate (PVAc) (M_n,GPC = 123,000 g/mol, M_w/M_n = 1.28) was synthesized by reversible addition‐fragmentation chain transfer polymerization (RAFT) under high pressure (5 kbar), using benzoyl peroxide and N,N‐dimethylaniline as initiator mediated by (S)‐2‐(ethyl propionate)‐(O‐ethyl xanthate) (X1) at 35 °C. Polymerization kinetic study with RAFT agent showed pseudo‐first order kinetics. Additionally, the polymerization rate of VAc under high pressure increased greatly than that under atmospheric pressure. The “living” feature of the resultant PVAc was confirmed by ¹H NMR spectroscopy and chain extension experiments. Well‐defined PVAc with high molecular weight and narrow molecular weight distribution can be obtained relatively fast by using RAFT polymerization at 5 kbar. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 1430–1436     

Effect of fullerene on radical polymerization of vinyl acetate

The effect of fullerene (C₆₀) on the radical polymerization of vinyl acetate (VAc) with dimethyl 2,2′‐azobisisobutyrate (MAIB) in benzene was investigated kinetically and by means of ESR. C₆₀ was found to act as an effective inhibitor in the present polymerization. All C₆₀ molecules used were incorporated into poly(VAc) during polymerization. The relationship of induction period and initiation rate reveals that a C₆₀ molecule can trap 15 radicals formed in the polymerization system. The polymerization rate (R_p) after the induction period is given by R_p = k [MAIB]^0.6 [VAc]^2.0 (60 °C), which is similar to that observed in the absence of C₆₀. Stable fullerene radical (C) was observed in the polymerization system by ESR. The C concentration increased with time and was then saturated. The saturation time well corresponds to the induction period observed in the polymerization. About 20% of C₆₀ molecules added could survive as stable C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2572–2578, 2000     

Photoinitiated RAFT polymerization of vinyl acetate

A photoinitiation process was investigated to develop a rapid and well‐controlled RAFT polymerization method applied to vinyl acetate (VAc) using methyl (ethoxycarbonothioyl)sulfanyl acetate (MESA) and bis(2,4,6‐trimethylbenzoyl)phenylphosphine oxide as the RAFT agent and photoinitiator, respectively. MESA was selected as the photochemically inert RAFT agent to minimize photolysis of the thiocarbonylthio groups during polymerization. Poly(vinyl acetate) with a prespecified well‐controlled molecular weight (MW) and a narrow MW distribution was successfully synthesized. The polymerization reaction proceeded as a living polymerization and was remarkably rapid compared with approaches that use thermally initiated processes with a very short induction period. A detailed kinetic study of the mechanism underlying the polymerization reaction, however, revealed that the chain ends containing xanthate moieties were not perfectly stable upon UV‐irradiation, and they generated radicals via homolytic cleavage. This reaction appeared to proceed by a combination of a degenerative transfer RAFT mechanism and a dissociation‐combination mechanism. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of poly(vinyl laurate)‐b‐poly(vinyl stearate) diblock copolymers by cobalt‐mediated radical polymerization in solution

Poly(vinyl laurate) (PVL) and poly(vinyl stearate) (PVS) were synthesized by means of cobalt‐mediated radical polymerization (CMRP). Cobalt(II) diacetylacetonate (Co(acac)₂) was demonstrated to control the radical polymerization of these monomers in solution. Molecular weights up to 15,000 g·mol^?1 were obtained with reasonably low polydispersity indices (PDI < 1.3). The efficiency of the redox initiator [lauroyle peroxide (LPO)/citric acid (CA)] was found to be low (around 10%) as already reported for vinyl acetate. The solvent and temperature were found to have a very weak influence on the initiator efficiency. It appeared that CA played no role in the initiation process that only involved a redox reaction between LPO and Co(acac)₂. PVL‐b‐PVS diblock copolymers could be synthesized using two strategies: (1) Sequential addition, that is, addition of the second monomer (VS) at high conversion of the first one (VL). (2) Macroinitiator technique, that is, isolation of a PVL macroinitiator then polymerization of VS from this cobalt functionalized macroinitiator. Both techniques allowed the synthesis of diblock copolymers with molar masses around 25,000 g·mol^?1 and PDI lower than 1.4. The resulting materials were characterized by DSC, revealing that both blocks exhibit side‐chain crystallinity and phase segregate in the bulk. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Emulsion polymerization of vinyl acetate using iodine‐transfer and RAFT radical polymerizations

This study deals with control of the molecular weight and molecular weight distribution of poly(vinyl acetate) by iodine‐transfer radical polymerization and reversible addition‐fragmentation transfer (RAFT) emulsion polymerizations as the first example. Emulsion polymerization using ethyl iodoacetate as the chain transfer agent more closely approximated the theoretical molecular weights than did the free radical polymerization. Although ¹H NMR spectra indicated that the peaks of α‐ and ω‐terminal groups were observed, the molecular weight distributions show a relatively broad range (M_w/M_n = 2.2–4.0). On the other hand, RAFT polymerizations revealed that the dithiocarbamate 7 is an excellent candidate to control the polymer molecular weight (M_n = 9.1 × 10³, M_w/M_n = 1.48), more so than xanthate 1 (M_n = 10.0 × 10³, M_w/M_n = 1.89) under same condition, with accompanied stable emulsions produced. In the M_n versus conversion plot, M_n increased linearly as a function of conversion. We also performed seed‐emulsion polymerization using poly(nonamethylene L ‐tartrate) as the chiral polyester seed to fabricate emulsions with core‐shell structures. The control of polymer molecular weight and emulsion stability, as well as stereoregularity, is also discussed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

In situ Fourier transform near infrared spectroscopy monitoring of copper mediated living radical polymerization

In situ Fourier transform near infrared (FTNIR) spectroscopy was successfully used to monitor monomer conversion during copper mediated living radical polymerization with N‐(n‐propyl)‐2‐pyridylmethanimine as a ligand. The conversion of vinyl protons in methacrylic monomers (methyl methacrylate, butyl methacrylate, and N‐hydroxysuccinimide methacrylate) to methylene protons in the polymer was monitored with an inert fiber‐optic probe. The monitoring of a poly(butyl methacrylate‐b‐methyl methacrylate‐b‐butyl methacrylate) triblock copolymer has also been reported with difunctional poly(methyl methacrylate) as a macroinitiator. In all cases FTNIR results correlated excellently with those obtained by ¹H NMR. On‐line near infrared (NIR) measurement was found to be more accurate because it provided many more data points and avoided sampling during the polymerization reaction. It also allowed the determination of kinetic parameters with, for example, the calculation of an apparent first‐order rate constant. All the results suggest that FTNIR spectroscopy is a valuable tool to assess kinetic data. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4933–4940, 2004     

Dicarbonyl pentaphenylcyclopentadienyl iron complex for living radical polymerization: Smooth generation of real active catalysts collaborating with phosphine ligand

We achieved metal‐catalyzed living radical polymerization (LRP) through “unique” catalyst transformation of iron (Fe) complex in situ. A dicarbonyl iron complex bearing a pentaphenylcyclopentadiene [(Cp^Ph)Fe(CO)₂Br: Cp^Ph = η‐C₅Ph₅] is too stable itself to catalyze LRP of methyl methacrylate (MMA) in conjunction with a bromide initiator [H‐(MMA)₂‐Br]. However, an addition of catalytic amount of triphenylphosphine (PPh₃) for the system led to a smooth consumption of MMA giving “controlled” polymers with narrow molecular weight distributions (～90% conversion within 24 h; M_w/M_n = 1.2). FTIR and ³¹P NMR analyses of the complex in the model reaction with H‐(MMA)₂‐Br and PPh₃ demonstrated that the two carbonyl ligands were irreversibly eliminated and instead the added phosphine was ligated to give some phosphorous complexes. The ligand exchange was characteristic to the Cp^Ph complex: the exchange was much smoother than other cyclopentadiene‐based complexes [i.e., CpFe(CO)₂Br: Cp = C₅H₅; Cp*Fe(CO)₂Br, Cp* = C₅Me₅]. The smooth transformation via the ligand exchange would certainly contribute to the controllability at the earlier stage in the polymerization as well as at the latter. The catalytic activity was enough high, as demonstrated by the successful monomer addition experiment and precise control even for higher molecular weight polymer (M_w/M_n < 1.2 under 1000‐mer condition). Such an in situ transformation from a stable complex would be advantageous to practical applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

From metal‐catalyzed radical telomerization to metal‐catalyzed radical polymerization of vinyl chloride: Toward living radical polymerization of vinyl chloride

The metal‐catalyzed radical polymerization of vinyl chloride (VC) in ortho‐dichlorobenzene initiated with various activated halides, such as α,α‐dihaloalkanes, α,α,α‐trihaloalkanes, perfloroalkyl halides, benzyl halides, pseudohalides, allyl halides, sulfonyl halides, α‐haloesters, α‐halonitriles, and imidyl halides, in the presence of Cu(0)/2,2′‐bipyridine, Fe(0)/o‐phenantroline, TiCp₂Cl₂, and other metal catalysts is reported. The formation of the monoadduct between the initiator and VC was achieved with all catalysts. However, propagation was observed only for metals in their zero oxidation state because they were able to reinitiate from geminal dihalo or allylic chloride structures. Poly(vinyl chloride) with molecular weights larger then the theoretical limit allowed by chain transfer to VC were obtained even at 130 °C. In addition, the most elemental features of a living radical polymerization, such as a linear dependence of the molecular weight and a decrease of polydispersity with conversion, were observed for the most promising systems based on iodine‐containing initiators and Cu(0), that is, I? CH₂? Ph? CH₂? I/Cu(0)/bpy (where bpy = 2,2′‐bipyridyl), at 130 °C. However, because of the formation of inactive species via chain transfer to VC and other side reactions, the observed conversions were in most cases lower than 40%. A mechanistic interpretation of the chain transfer to monomer in the presence of Cu species is proposed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3392–3418, 2001     

Grafting reactions of vinyl acetate onto poly[(vinyl alcohol)-co-(vinyl acetate)]

The grafting preference of vinyl acetate onto the methine carbon of poly(vinyl alcohol) (PVOH) versus the acetate group of poly(vinyl acetate) (PVAc) was determined as part of an attempt to prepare novel branched PVOH from partially hydrolyzed PVAc. The results showed long chain grafting on the acetate groups of the PVAc units rather than the methine carbons of the PVOH or PVAc units. Decreasing the monomer or initiator concentration decreased the molecular weight of the graft copolymer formed. Of the initiators studied, ammonium persulfate gave the largest increase in copolymer molecular weight. Both hydrolysis and reacetylation combined with gel permeation chromatography (GPC) and ¹³C-NMR of the fully hydrolyzed material were used to estimate the number and location of grafts. © 1996 John Wiley & Sons, Inc.     

Cycloalkyl-substituted salicylaldimine-nickel(II) complexes as mediators in controlled radical polymerization of vinyl acetate

Abstract

Nickel(II) complexes of Schiff base derived from cycloalkylamines (cycloalkyl?=?cyclopentyl (cpen), cyclohexyl (chex), and cycloheptyl (chep)) were synthesized: [Ni^II(L^cpen)₂] (1), [Ni^II(L^chex)₂] (2), and [Ni^II(L^chep)₂] (3). The Schiff base-Ni^II complexes 1-3 were characterized by FTIR, UV–Vis, elemental analysis, and computational methods. Electrodeposited films of complexes 1–3 were obtained by potential cycling CH₂Cl₂ on platinum electrode, and their electrochemical behavior were characterized by cyclic voltammetry. The polymerization of vinyl acetate (VAc) initiated by azobisisobutyronitrile (AIBN) at 55?°C were conducted according to an organometallic-mediated radical polymerization (OMRP) mechanism. The best conversions were obtained using a ratio of [VAc]/[AIBN]/[Ni]?=?542/3.25/1, reaching 50, 69 and 85% in 12?h for 1, 2 and 3, respectively. The kinetic of polymerization mediated by complex 1 exhibited a linear dependence of ln([VAc]₀/[VAc]) versus time, supporting a constant radical concentration; while for the complexes 2 and 3, the radical concentration was constant for a short period of time. The increase of molecular weights with the conversion coupled with low polydispersities indicate a certain level of control of the polymerization when using the complexes [Ni^II(L^R)₂] as controlling agents.     

Cobalt(II) phenoxy-imine complexes in radical polymerization of vinyl acetate: The interplay of catalytic chain transfer and controlled/living radical polymerization

A series of cobalt(II) phenoxy-imine complexes (Co^II(FI)₂) have been synthesized to mediate the radical polymerization of vinyl acetate (VAc) and methyl acrylate (MA) to evaluate the influence of chelating atoms and configuration to the control of polymerization. The VAc polymerizations showed the properties of controlled/living radical polymerization (C/LRP) with complexes 1a and 3a , but the catalytic chain transfer (CCT) behaviors with complexes 2a , 1b , 2b , and 3b . The control of VAc polymerization mediated by complex 1a could be improved by decreasing the reaction temperature to approach the molecular weights that not only linearly increased with conversions but also matched the theoretical values and relatively narrow molecular weight distributions. The catalytic chain transfer polymerizations (CCTP) mediated by complexes 2a , 1b , 2b , and 3b were characterized by Mayo plots and the polymer chain end double bonds were observed by ¹H NMR spectra. The tendency toward C/LRP or CCTP in VAc polymerization mediated by Co^II(FI)₂ could be determined by the ligand structure. Cobalt complex coordinated by the ligand with more steric hindered and less electron-donating substituents favored the controlled/living radical polymerization. In contrast, the efficiency of CCT process could be enhanced by less steric hindered, more electron-donating ligands. The controlled/living radical polymerization of MA, however, could not be achieved by the mediation of these cobalt(II) phenoxy-imine complexes. Associated with the results of polymerization mediated by other cobalt complexes, this study implied that the configuration and spin state of cobalt complexes were more critical than the chelating atoms to the control behavior of radical polymerization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 101–113