Kinetic studies on the metal(II) tartarate–peroxomonosulfate reaction

The kinetics of oxidation of tartaric acid (TAR) by peroxomonosulfate (PMS) in the presence of Cu(II) and Ni(II) ions was studied in the pH range 4.05–5.20 and also in alkaline medium (pH ～12.7). The rate was calculated by measuring the [PMS] at various time intervals. The metal ions concentration range used in the kinetic studies was 2.50 × 10^?5 to 1.00 × 10^?4 M [Cu(II)], 2.50 × 10^?4 to 2.00 × 10^?3M [Ni(II)], 0.05 to 0.10 M [TAR], and µ = 0.15 M. The metal(II) tartarates, not TAR/tartarate, are oxidized by PMS. The oxidation of copper(II) tartarate at the acidic pH shows an appreciable induction period, usually 30–60 min, as in classical autocatalysis reaction. The induction period in nickel(II) tartarate is small. Analysis of the [PMS]–time profile shows that the reactions proceed through autocatalysis. In alkaline medium, the Cu(II) tartarate–PMS reaction involves autocatalysis whereas Ni(II) tartarate obeys simple first‐order kinetics with respect to [PMS]. The calculated rate constants for the initial oxidation (k₁) and catalyzed oxidation (k₂) at [TAR] = 0.05 M, pH 4.05, and 31°C are Cu(II) (1.00 × 10^?4 M): k₁ = 4.12 × 10^?6 s^?1, k₂ = 7.76 × 10^?1 M^?1s^?1 and Ni(II) (1.00 × 10^?3 M): k₁ = 5.80 × 10^?5 s^?1, k₂ = 8.11 × 10^?2 M^?1 s^?1. The results suggest that the initial reaction is the oxidative decarboxylation of the tartarate to an aldehyde. The aldehyde intermediate may react with the alpha hydroxyl group of the tartarate to give a hemi acetal, which may be responsible for the autocatalysis. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 620–630, 2011     

Pre-column chelation liquid chromatographic separation and determination of trace V,Cu, Co,Pd, Fe and Ni

Conditions for the separation by reversed-phase liquid chromatography (LC) of V(V), Cu(II), Co(III), Pd(II), Fe(III) and Ni(II) chelates with 2-(5-bromopyridylazo)-5-diethylaminophenol (5-Br-PADAP) were studied. Six species of metal chelates were separated successfully with methanol-acetonitrile-water (72:12:16, v/v/v) containing 0.13 M NaCl and 0.29 mM cetyltrimethylammonium bromide (pH 5.0) as the mobile phase on a Nucleosil C₁₈ (5 μm) column (250 × 4 mm i.d.).The conditions of the determination of these metal chelates are discussed. A simple and rapid method for the determination of trace amounts of V(V), Cu(II), Co(III), Pd(II) and Ni(II) simultaneously by reversed-phase LC has been developed. The detection limits are 5 × 10^?12, 1 × 10^?10, 3 × 10^?11, 5.3 × 10^?9 and 2 × 10^?10 g, respectively. The method is applied to the determination of these metals in natural waters and mineral samples.     

Metal(II) Formates (M = Fe,Co, Ni,and Cu) Stabilized by Tetramethylethylenediamine (tmeda): Convenient Molecular Precursors for the Synthesis of Supported Nanoparticles

γ‐Alumina supported 3d transition‐metal nanoparticles are commonly used catalysts for several industrial reactions, such as Fischer‐Tropsch, reforming, methanation, and hydrogenation reactions. However, the activity of such catalyst is often limited by the low metal dispersion and a high content of irreducible metal, inherent to the conventional preparation methods in aqueous phase. In this context, we have recently shown that [{Ni(μ²‐OCHO)(OCHO)(tmeda)}₂(μ²‐OH₂)] (tmeda=tetramethylethylenediamine) is a suitable molecular precursor for the formation of 1–2 nm large nanoparticles onto alumina. Here, we explore the synthesis of the corresponding Fe, Co, and Cu molecular precursors, namely [{Fe(μ²‐OCHO)(OCHO)(tmeda)}₄], [{Co(μ²‐OCHO)(OCHO)(tmeda)}₂(μ²‐OH₂ )], [Cu(κ²‐OCHO)₂(tmeda)], which are, like the Ni precursor, soluble in a range of solvents, rendering them convenient metal precursors for the preparation of supported metallic nanoparticles on γ‐alumina. Using a specific adsorption of the molecular precursor on γ‐alumina in a suitable organic solvent, treatment under H₂ provides small and narrowly distributed Fe (2.5±0.9 nm), Co (3.0±1.2 nm), Ni (1.7±0.5 nm), and Cu (2.1±1.5 nm) nanoparticles. XAS shows that the proportion of MAl₂O₄ (M = Co, Ni, Cu) is small, thus illustrating the advantage of using these tailor‐made molecular precursors.     

Chemical and electrochemical behavior of metallic technetium in acidic media

The chemical and electrochemical properties of technetium metal were studied in 1–6 M HX and in 1 M NaX (pH 1 and 2.5), X = Cl, NO₃. The chemical dissolution rates of Tc metal were higher in HNO₃ than in HCl (i.e. 8.63 × 10^?5 mol cm^?2 h^?1 in 6 M HNO₃ versus 2.05 × 10^?9 mol cm^?2 h^?1 in 6 M HCl). The electrochemical dissolution rates in HNO₃ and HCl were similar and mainly depended on the electrochemical potential and the acid concentration. The optimum dissolution of Tc metal was obtained in 1 M HNO₃ at 1 V/AgAgCl (1.70 × 10^?3 mol cm^?2 h^?1). The dissolution potentials of Tc metal in nitric acid were in the range of 0.596–0.832 V/AgAgCl. Comparison of Tc behavior with Mo and Ru indicated that in HNO₃, the dissolution rate followed the order: Mo > Tc > Ru, and for dissolution potential the order: E _diss(Ru) > E _diss(Tc) > E _diss(Mo). The corrosion products of Tc metal were analyzed in HCl solution by UV–Visible spectroscopy and showed the presence of TcO₄ ^?. The surface of the electrode was characterized by microscopic techniques; it indicated that Tc metal preferentially corroded at the scratches formed during the polishing and no oxide layer was observed.     

Photometric determination of aqueous cobalt (II), nickel (II), copper (II) and iron (III) with 1-nitroso-2-naphthol-3,6-disulfonic acid disodium salt in gelatin films

Photometric determination of aqueous Co(II), Cu(II), Ni(II) and Fe(III) was performed using indicator films prepared by immobilization of 1-nitroso-2-naphthol-3,6-disulfonic acid disodium salt (NRS) into hardened photographic film. Immobilization was based on electrostatic interaction of reagent and metal complexes with the gelatin. The isoelectric point pH of hardened gelatin (4.46±0.04) was evaluated by viscometry. Co(II), Fe(III), Ni(II) form 1:3 complexes with NRS in gelatin at pH 2 and Cu(II) forms 1:2 complexes. Their log β′ values were: Co-6.7, Fe-8.6, Cu-8.0, and Ni-6.4. The absorption maxima were: 370nm for NRS, and 430nm, 470nm, 495nm and 720nm for complexes of Co(II), Ni(II), Cu(II) and Fe(III). An algorithm for their simultaneous determination using the indicator films was developed. The detection limits were: c_lim(Co²⁺) = 0.45×10⁻⁵ M, c_lim(Fe³⁺) = 0.50×10⁻⁵ M, c_lim(Cu²⁺) = 0.67×10⁻⁵ M, c_lim(Ni²⁺) = 0.75×10⁻⁵ M,; and their sum c_lim(ΣMn⁺) = 0.82×10⁻⁵ M.      

Syntheses,characterization, in vitro antiglycation and DPPH radical scavenging activities of isatin salicylhydrazidehydrazone and its Mn (II), Co (II), Ni (II), Cu (II), and Zn (II) metal complexes

2-Hydroxy salicylhydrazide isatin hydrazone (L) and its Mn (II), Co (II), Ni (II), Cu (II), and Zn (II), metal complexes were synthesized. ¹H NMR, UV–Vis, IR spectroscopy and elemental (CHN/S) analysis techniques were applied for characterization. TG/DTA techniques revealed that all the synthetic compounds are thermally stable up to 300 °C. They were found non-electrolytes in nature. Furthermore, all these complexes were evaluated for antiglycation and DPPH radical scavenging activities. They showed varying degree of activity with IC₅₀ values between 168.23 and 269.0 μM in antiglycation and 29.63–57.71 μM in DPPH radical scavenging activity. Mn (II), Co (II), Ni (II), Cu (II), and Zn (II), metal complexes showed good antiglycation as well as DPPH radical scavenging activity. The IC₅₀ values for antiglycation activity are 168.23 ± 2.37, 234.27 ± 4.33, 257.1 ± 6.43, 267.7 ± 8.43, 269.0 ± 8.56 Ni for Co, Zn, Mn, Cu, and Ni complexes, respectively, while IC₅₀ value were found to be 29.63 ± 2.76, 31.13 ± 1.41, 35.16 ± 2.45, 43.53 ± 3.12, 57.71 ± 2.61 μM for Cu, Zn, Mn, Co and Ni complexes, respectively, for DPPH radical scavenging activity. These synthesized metal complexes were found to be better active than standards Rutin (IC₅₀ = 294.46 μM) for anti-glycation, and tert-butyl-4-hydroxyanisole (IC₅₀ = 44.7 μM) for DPPH radical scavenging activity.     

C–H···Onitrate synthon assisted molecular assembly of hydrogen bonded Ni(II) and Cu(II) complexes

Two Schiff base metal complexes [Cu–SPETN·NO₃ (1) and Ni–SPETN·NO₃ (2) [SPETN?=?2,2′-[propane,1,3-diylbis(nitrilomethyldyne)pyridyl,phenolate]] with hydrogen bonding groups have been synthesized and characterized by single-crystal X-ray diffraction. In both of the compounds nitrates occupy a crystallographic general position. In 1 the lattice nitrates are on the 2₁ screw axis while in 2 they are at the crystallographic inversion center. C–H···O_nitrate synthons (formed by the nitrate anions and peripheral hydrogen bonding groups of the metal complexes) are non-covalent building blocks in molecular-assembly and packing of the cationic Schiff base metal complexes (M?=?Ni²⁺, Cu²⁺), resulting in 2-D hydrogen bonded networks. The Cu···Cu non-bonding contact in 1 is 3.268?Å while the Ni–Ni bonding distance in 2 is 3.437?Å.     

Fabrication of Fe3O4 Nanoparticles Modified Electrode and Its Application for Voltammetric Sensing of Dopamine

Magnetic nanoparticles of Fe₃O₄ approximately 5nm in size were synthesized and characterized by XRD and TEM. A novel gold electrode modified with Fe₃O₄ nanoparticles was then constructed and was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The modified electrode exhibited strong promoting effect and high stability toward the electrochemical oxidation of dopamine (DA), which gave reversible redox peaks with a formal potential of 0.192 V (vs. Ag/AgCl) electrode in pH 7.0 phosphate buffer solution (PB). The anodic peak currents (measured by constant potential amperometry) increased linearly with the concentration of dopamine in the range of 1.5×10^?7 to 4.0×10^?4 M. The detection limit (S/N=3) obtained was 3.0×10^?8 M. The relative standard deviation (RSD) of 8 successive scans was 3.41% for 1.5×10^?6 M DA. The interference of ascorbic acid (AA) could be eliminated efficiently. The proposed method showed excellent sensitivity and recovery.     

Plant‐supported silver nanoparticles: Efficient,economically viable and easily recoverable catalyst for the reduction of organic pollutants

Ginger rhizome powder was used for the synthesis of supported metallic nanoparticle catalysts. A simple and novel adsorption method was used for the synthesis of silver nanoparticles loaded on ginger powder (Ag/GP), copper on ginger powder (Cu/GP) and nickel on ginger powder (Ni/GP). Among these, Ag/GP showed selective reduction of methyl orange and was used for further reactions. The prepared nanomaterials were characterized through X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, fourier transform infrared spectroscopy and energy‐dispersive X‐ray spectroscopy. The prepared Ag/GP catalyst was employed in the catalytic reduction of 4‐nitrophenol (4‐NP), 2‐nitrophenol (2‐NP), rhodamine B, methyl red and congo red. Ag/GP showed excellent catalytic reduction activity, the rate constants being 1.26 × 10^?3 and 2.38 × 10^?3 s^?1 for 2‐NP and 4‐NP, respectively. The turnover frequency reached 1.06 min^?1 for 2‐NP and 1.16 min^?1 for 4‐NP when using the Ag/GP catalyst. The prepared Ag/GP catalyst demonstrated outstanding activity for the degradation of a mixed solution of dyes. Also, stability and reusability of the prepared catalyst were investigated, which showed outstanding reusability up to five times and was stable up to five days.     

An efficient and easily retrievable dip catalyst based on silver nanoparticles/chitosan-coated cellulose filter paper

Re-use of a catalyst is an important task, which is usually achieved by loading it on easily separable supports such as magnetic substrates. However, we demonstrate here the process of easy and fast catalyst separation from a reaction medium by loading it onto an economically feasible and microscopically high surface substrate of filter paper (FP) made up of cellulose microfibers as catalyst support. To achieve the goal, we coated chitosan (CH) on filter paper (CH-FP) to impart a high affinity of the substrate for metal ion absorption. AgNO₃ dissolved in water with a 0.1 M concentration was used as the Ag ion carrier solution, and CH-FP strips with known rectangular dimensions were submerged into it for the metal ion absorption. The metal ion-laden CH-FP strips were dip treated with sodium borohydride (NaBH₄) aqueous solution to prepare Ag-nanoparticle loaded CH-FP (Ag/CH-FP). X-ray diffraction and energy dispersive X-ray spectroscopy confirmed the formation of the Ag/CH-FP hybrid. Ag/CH-FP morphology was examined through scanning electron microscopy analysis, which showed the presence of Ag nanoparticles attached to the cellulose microfibers. The prepared Ag/CH-FP was employed as a dip catalyst for the degradation of nitroarene compounds of 2-nitophenol (2-NP) and 4-nitrophenol (4-NP) by NaBH₄. Remarkably, the rate constants for 4-NP and 2-NP were 3.9 × 10^?3 and 1.7 × 10^?3 s^?1, respectively. In addition, we discussed the ease of the catalyst retrievability from the reaction mixture and its re-usability.     

Simultaneous determination of dopamine, uric acid and ascorbic acid with LaFeO3 nanoparticles modified electrode

LaFeO₃ nanoparticles of approximately 22 nm in size were synthesized and characterized by XRD and TEM. A novel glassy carbon electrode modified with LaFeO₃ nanoparticles was constructed and characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The modified electrode exhibited strong promoting effect and high stability toward the electrochemical oxidation of dopamine (DA), which gave reversible redox peaks with a formal potential of 0.145 V (vs. Ag/AgCl) in pH 7.0 phosphate buffer solution. The anodic peak current (measured by constant potential amperometry) increased linearly with the concentration of dopamine in the range from 1.5?×?10^?7 to 8.0?×?10^?4 M. The detection limit was 3.0?×?10^?8 M. The relative standard deviation of eight successive scans was 3.47% for 1.0?×?10^?6 M DA. The interference by ascorbic acid was eliminated efficiently. The method was used to determine DA in dopamine hydrochloride injections and showed excellent sensitivity and recovery.     

THE EPR SPECTRA OF TETRADENTATE SCHIFF BASE COMPLEXES OF COPPER (II) II. N,N'-bis(salicylidene)ethylenediimine and 7-methyl-N,N'-bis (salicylidene)ethylenediimine

Abstract

The EPR spectra of single crystals of ⁶³Cu(II) doped N, N'-bis(salicylidene)ethylenediimine Ni(II), [Ni(sal)₂en] and 7-methyl-N, N'-bis(salicylidene)ethylenediimine Ni(II), [Ni(7-me sal)₂en] have been studied. The usual doublet spin-Hamiltonian parameters for the complexes have been found to be: Cu(II)[(sal)₂en]; g _z =2.192 ± 0.002; g _x =2.046 ± 0.004; g _y =2.049 ± 0.004; A _z =201.0 × 10^?4 cm^?1; A _x =29.3 × 10^?4 cm^?1; A _y =31.3 × 10^?4 cm^?1; A^N _z =12.6 × 10^?4 cm^?1; A ^N _x =14.5 × 10^?4 cm^?1; A ^N _y =15.7 × 10^?4 cm^?1; A ^H _z =6.3 × 10^?4 cm^?1; A ^H _x =7.3 × 10^?4 cm^?1; A ^H _y =7.9 × 10^?4 cm^?1; Cu(II)[(7-me sal)₂en]; g _z =2.189 ± 0.002; g _x =2.037 ± 0.004; g _y =2.046 ± 0.004; A _z =203.0 × 10^?4 cm^?1; A _x =36.9 × 10^?4 cm^?1; A _y =22.7 × 10^?4 cm^?1; A ^N _z =12.6 × 10^?4 cm^?1; A ^N _x =13.3 × 10^?4 cm^?1; A ^N _y =14.0 × 10^?4 cm^?1. Values of molecular orbital coefficients calculated for these complexes show that their bonding properties are similar to those of other compounds of this type. There is considerable covalency in the metal-ligand [sgrave]-bonds, and significant in-plane pi-bonding is present.     

Direct electrochemistry and electrochemical biosensing of glucose oxidase based on CdSe@CdS quantum dots and MWNT-modified electrode

The direct electron transfer of glucose oxidase (GOx) was achieved based on the immobilization of CdSe@CdS quantum dots on glassy carbon electrode by multi-wall carbon nanotubes (MWNTs)-chitosan (Chit) film. The immobilized GOx displayed a pair of well-defined and reversible redox peaks with a formal potential (E ^θ’) of ?0.459 V (versus Ag/AgCl) in 0.1 M pH 7.0 phosphate buffer solution. The apparent heterogeneous electron transfer rate constants (k _s) of GOx confined in MWNTs-Chit/CdSe@CdS membrane were evaluated as 1.56 s^?1 according to Laviron's equation. The surface concentration (Γ*) of the electroactive GOx in the MWNTs-Chit film was estimated to be (6.52?±?0.01)?×?10^?11?mol?cm^?2. Meanwhile, the catalytic ability of GOx toward the oxidation of glucose was studied. Its apparent Michaelis–Menten constant for glucose was 0.46?±?0.01 mM, showing a good affinity. The linear range for glucose determination was from 1.6?×?10^?4 to 5.6?×?10^?3?M with a relatively high sensitivity of 31.13?±?0.02 μA?mM^?1?cm^?2 and a detection limit of 2.5?×?10^?5?M (S/N=3).     

The relaxation spectra of nickel(II) and cobalt(II) arginine complexes

The temperature-jump method has been used to determine the nickel(II)- and cobalt(II)-arginine complexation kinetics. In the pH range studied, the neutral form of the ligand, HL, is the attacking, as well as the complexed, ligand species. The reactions reported on are of the type where n = 1, 2, 3 and M is Ni or Co. At 25° and ionic strength 0.1M the association rate constants are: for nickel(II) k₁ = 2.3 × 10³(±20%), k₂ = 2.4 × 10⁴(±20%), k₃ = 3.5 × 10⁴(±40%) M^?1 sec^?1; for cobalt(II) k₁ = 1.5 × 10⁵(±20%), k₂ = 8.7 × 10⁵(±20%), k₃ = 2.0 × 10⁵(±40%) M^?1 sec^?1. Arginine binds to metal ions less well than homologous chelating agents due to the electrostatic repulsion arising from the positively charged terminus of the zwitterion. Kinetically, the effect appears in the association rate constants with nickel reactions more strongly influenced than cobalt.     

Electrochemical Determination of Boron in Natural Waters

Abstract

A sensitive voltammetric method for the determination of trace boron, based on the formation of the complex of boric acid with 4‐hydroxy‐5‐[salicylideneamino]‐2‐7‐naphthalenedisulfonic acid (azomethine H) is described. The reduction of the boric acid‐azomethine H complex at a hanging mercury drop electrode was exploited by square wave voltammetry (SWV) and cyclic voltammetry to determine boron in natural water samples, which were collected in the regions surrounding the boron mines of Central Anatolia. A reduction peak that belongs to the boric acid‐azomethine H complex at this electrode was observed at ?1.05 V vs. Ag/AgCl/KCl_(sat.). The effects of various parameters, such as ligand concentration, boric acid concentration, and formation time of the boric acid‐azomethine H complex, were investigated. Electrochemical experiments were conducted in 1.0 M HOAc/0.5 M NH₄OAc buffer at pH of 4.4±0.2. Linear working range was established by regression analysis between 5.0×10^?8 M and 1.0×10^?4 M. The probable metal cation interferences in water samples were eliminated by adding EDTA (ethylenediaminetetraacetic acid) to the samples. Data obtained using the square wave voltammetric (SWV) technique was compared statistically with inductively coupled plasma mass spectroscopy (ICP‐MS) data. Evaluation of the method based on statistical data was performed and the values of the limit of detection (LOD) and limit of quantitation (LOQ) were found to be 4.17×10^?6 M and 1.39×10^?5 M, respectively.     

Studies on thermal stabilities of coordination compounds by gas chromatography: XVIII. Activation and hydrogenation of coordinated CN−

Various metal (Cr, Mn, Fe, Co, Ni, Cu, Zn, Ag, Sn, La) ferrocyanides and ferricyanides may be considered as a multibond activation model of bimetal coordination, since CN^? acts as a typical ambident ligand bonded at the two ends with two metal ions. In accordance with hydrogenation reactions of CN^? taking place during thermal decomposition in hydrogen, the activation effect of bimetal coordination and the mechanism of hydrogenation reaction of CN^? are discussed from the viewpoint of the crystal structure and the electron structure of the complexes. The activation degree of CN^? bonded with various metal ions has been investigated. It was found that the temperature at which the triple bond of CN^? breaks with top speed to evolve NH₃ correlates closely with the standard electrode potential, and d electron configuration of the metal ions.     

Cyanide adsorbed on coinage metal electrodes: A relativistic density functional investigation

The adsorptive properties of cyanide (CN⁻) on coinage metal (M) electrodes (M=Cu, Ag, Au) have been investigated using a relativistic density functional method. The way to model the electrochemical potential applied to the electrodes is to consider the systems in the presence of a perturbative external field F. The field-perturbative approach is proven to be a suitable method in interpreting the observed spectral shifts with electrode potential. The calculated potential-dependent shifts of ω_{M(SINGLE BOND)CN} and ω_{C(SINGLE BOND)M} are similar for the three metals, in agreement with experiment observations. The relativistic effects are required to account for the similarity in the frequency shifts of ω_{M(SINGLE BOND)CN}. The calculated vibrational tuning rates dω_{C(SINGLE BOND)N}/dF are 6.61×10⁻⁷, 6.61×10⁻⁷, and 5.64×10⁻⁷ cm⁻¹/(V/cm) for M=Cu, Ag, and Au, respectively. The coupling of the M(SINGLE BOND)CN and C(SINGLE BOND)N internal modes contributes significantly (about 25%) to the size of the frequency shifts Δω_{C(SINGLE BOND)N} of the ligand. The effect of electric fields on the metal(SINGLE BOND)CN⁻ bonding is also investigated. It is shown that changes in the magnitude of CN⁻ to the metal donation and M(SINGLE BOND)CN bond strength occur under the influence of the electric field. © 1998 John Wiley & Sons, Inc. Int J Quant Chem 67: 175–185, 1998     

Electrochemical and Spectral Behaviour of a New Cardiotonic Drug (Sulmazole)

Abstract

Spectrophotometric and electrochemical properties of sulmazole are studied. The acid-base constants are calculated (pk_a1 = 3.88 ± 0.04 and pK_a2 = 11.39 ± 0.06).

The drug can be spectrophotometrically determined between 4.01 × 10^?5 M and 4.02 × 10^?6 M at 327 nm with relative errors lower than 0.4 % and relative standard deviations lower than 2.0 %.

The electrochemical reduction of sulmazole was investigated by DCT, DP polarography and cyclic voltammetry. Reduction of the drug was carried out in two irreversible steps using Britton-Robinson bu ffer (pH < 7). Half-wave potentials for 1.53 × 10^?4 M sulmazole at pH 2.5 are -0.825 V and -0.995 V (versus Ag/AgCl/3M KC1).

Two different methods for determination of sulmazole in tablets are proposed.     

Determination of Cytochrome C with Cellulose – DNA Modified Carbon Paste Electrodes

A sensor for cytochrome c (cyt c) was developed using a carbon paste electrode (CPE) modified with cellulose‐DNA. Cyt c was adsorbed on the cellulose‐DNA modified CPE through the electrostatic interaction between them. Owing to this process, a pair of well‐defined peaks appeared at +48 mV/85 mV (E_pc/E_pa vs. Ag/AgCl). This property of the cellulose‐DNA modified CPE was utilized for the analysis of cyt c in a biological sample. The optimum experimental conditions for analysis were investigated and a calibration plot was obtained between 1.0×10^?4 M and 1.0×10^?6 M (±5% at n=5) at the optimized condition. The detection limit for cyt c at the optimized experimental condition was 5.0×10^?7 M (S/N=3) for 30 min of deposition time with differential pulse voltammetry (DPV). The real sample analysis was carried out with the standard addition method to evaluate the developed method. The content of cyt c in total proteins of 80.0 mg/mL in rat mitocondria fractions was determined to be 0.12 (±0.02) mg/mL.     

Halide‐Anion Binding by Singly and Doubly N‐Confused Porphyrins

The halide‐binding properties of N‐confused porphyrin (NCP, 1 ) and doubly N‐confused porphyrins (trans‐N₂CP ( 2 ), cis‐N₂CP ( 3 )) were examined in CH₂Cl₂. In the free‐base forms, cis‐N₂CP ( 3 ) showed the highest affinity to each anion (Cl^?, Br^?, I^?) with association constants K_a=7.8×10³, 1.9×10³, and 5.8×10² M ^?1, respectively. As metal complexes, on the other hand, trans‐N₂CP 2–Cu exhibited the highest affinity to Cl^?, Br^?, and I^? with K_a=9.0×10⁴, 2.7×10⁴, and 1.9×10³ M ^?1, respectively. The corresponding K_a values for cis‐N₂CP 3–Cu and NCP 1–Cu were about 1/10 and 1/2, respectively, of those of 2–Cu . With the help of density functional theory (DFT) calculations and complementary affinity measurements of a series of trisubstituted N‐confused porphyrins, the efficient anion binding of NCPs was attributed to strong hydrogen bonding at the highly polarized NH moieties owing to the electron‐deficient C₆F₅ groups at meso positions as well as the ideally oriented dipole moments and large molecular polarizability. The orientation and magnitude of the dipole moments in NCPs were suggested to be important factors in the differentiation of the affinity for anions.