Single‐electron transfer‐living radical copolymerization of butyl methacrylate and divinylbenzene for preparation of oil‐absorbing gel

Crosslinking copolymerization of butyl methacrylate with a small amount of divinylbenzene (DVB) was carried out using single‐electron transfer‐living radical polymerization initiated with carbon tetrachloride (CCl₄) and catalyzed by Cu(0)/N‐ligand in N,N‐dimethylformamide to produce a highly oil‐absorbing gel. The polymerization, gelation process, and oil‐absorbing properties were studied in detail. Analysis of monomer conversion with reaction time showed that the polymerization followed first‐order kinetics for both linear and crosslinking polymerization before gelation. Higher levels of DVB led to earlier gelation and the influence of N‐ligand on gelation was also significant. Under optimal conditions, oil absorption of the prepared gel to chloroform could reach 42.1 g·g^?1. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3233–3239     

Cationic copolymerization of racemic‐β‐butyrolactone with L,L‐lactide: One‐pot synthesis of block copolymers

Cationic copolymerization of racemic‐β‐butyrolactone (β‐BL) with l,l ‐lactide (LA) initiated by alcohol and catalyzed by trifluoromethanesulfonic acid proceeding by activated monomer (AM) mechanism was investigated. Although both comonomers were present from the beginning in the reaction mixture, polymerization proceeded in sequential manner, with poly‐BL formed at the first stage acting as a macroinitiator for the subsequent polymerization of LA. Such course of copolymerization was confirmed by following the consumption of both comonomers throughout the process as well as by observing the changes of growing chain‐end structure using ¹H NMR. ¹³C NMR analysis and thermogravimetry revealed the block structure of resulting copolymers. The proposed mechanism of copolymerization was confirmed by the studies of changes of ¹H NMR chemical shift of acidic proton in the course of copolymerization, providing an indication that indeed protonated species and hydroxyl groups are present throughout the process, as required for AM mechanism. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4873–4884     

Precisely controlled copper(0)‐catalyzed one‐pot reaction: Concurrent living radical polymerization and click chemistry

Copper(0)‐catalyzed one‐pot reaction combining living radical polymerization and “click chemistry” was investigated. By precisely tuning reaction time, three novel well‐defined polymers with different degree of carboxyl substitution, poly(propargyl methacrylate) (PPgMA), poly(1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate) (PCTMMA), and poly(1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate‐co‐propargyl methacrylate) (PCTMMA‐co‐PPgMA) were selectively obtained via Cu(0) powder/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) cocatalyzed LRP and click chemistry. In addition, gel permeation chromatography and ¹H NMR analysis in conjunction with FTIR spectroscopy elucidate that one‐pot process undergoes three steps due to a pronounced rate enhancement of click reaction: (1) generating new monomer, 1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate (CTMMA); (2) copolymerization of two monomers (CTMMA and PgMA); (3) building homopolymer PCTMMA. Surprisingly, in contrast to typical Cu(I)‐catalyzed atom transfer radical polymerization (ATRP), copper(0)‐catalyzed one‐pot reaction showed high carboxylic acid group tolerance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thiophenol derivatives as a reducing agent for in situ generation of Cu(I) species via electron transfer reaction in copper‐catalyzed living/controlled radical polymerization of styrene

The copper‐catalyzed living radical polymerization (LRP) of styrene (St) was carried out in the presence of thiophenol derivative such as sodium thiophenolate (PhSNa) or p‐methoxythiophenol as a reducing agent for Cu(II) by using either 1‐chloro‐1‐phenyl ethane or ethyl‐2‐bromoisobutyrate as an initiator and N,N,N′,N″,N″‐pentamethyldiethylenetriamine as ligand at 110 °C. Kinetic experiments were carried out to reveal the effect of PhSNa concentration on copper‐catalyzed LRP of St. This technique was successfully applied for the preparation of both chain‐extended polymer and block copolymer polystyrene‐b‐poly(methyl methacrylate). The obtained polymers were characterized using GPC, ¹H‐NMR, and MALDI‐TOF measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5923–5932, 2006     

Poly(methyl methacrylate‐co‐pentaerythritol tetraacrylate‐co‐butyl methacrylate)‐g‐polystyrene: Synthesis and high oil‐absorption property

Well‐defined high oil‐absorption resin was successfully prepared via living radical polymerization on surface of polystyrene resin‐supported N‐chlorosulfonamide group utilizing methyl methacrylate and butyl methacrylate as monomers, ferric trichloride/iminodiacetic acid (FeCl₃/IDA) as catalyst system, pentaerythritol tetraacrylate as crosslinker, and L ‐ascorbic acid as reducing agent. The polymerization proceeded in a “living” polymerization manner as indicated by linearity kinetic plot of the polymerization. Effects of crosslinker, catalyst, macroinitiator, reducing agent on polymerization and absorption property were discussed in detail. The chemical structure of sorbent was determined by FTIR spectrometry. The oil‐absorption resin shows a toluene absorption capacity of 21 g g^?1. The adsorption of oil behaves as pseudo‐first‐order kinetic model rather than pseudo‐second‐order kinetic model. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Design of maleimide monomer for higher level of alternating sequence in radical copolymerization with styrene

This work deals with design of maleimide monomer toward more precise control of alternating sequence for radical copolymerization with styrene. Crucial in this study is sequence analysis by MALDI‐TOF‐MS for resultant copolymers that was obtained via ruthenium‐catalyzed living radical copolymerization with a malonate‐based alkyl halide initiator showing selective initiation ability. The copolymers of a simple N‐alkyl maleimide [e.g., N‐ethyl maleimide (EMI)] with styrene gave complicated peak patterns for the MALDI‐TOF‐MS spectra indicating low degree of alternating sequence, in contrary to expectation from the reactivity ratios (almost zero). A simple substitution of methyl group (CH₃) of EMI with trifluoromethyl (CF₃: CF₃‐MI) made the peak patterns much simpler giving the copolymer with higher alternating sequence. More interestingly, the peak interval of the copolymer at earlier polymerization stage was equal to sum of the molecular weights of CF₃‐MI and styrene, suggesting possibility of the pair propagation of the monomers. Indeed, ¹H NMR analyses of the mixture of maleimide with styrene suggested stronger interaction of CF₃‐MI than EMI. Based on the results, maleimide derivatives carrying a substituent‐designable electron‐withdrawing group [ROC(?O)N–: R = substituent] were newly designed toward incorporation of functional side chains. They also gave higher alternating sequence for the copolymerization with styrene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 367–375     

Synthesis of Styrenic‐Terminated Methacrylate Macromonomers by Nitroanion‐Initiated Living Anionic Polymerization

N‐Isopropyl‐4‐vinylbenzylamine (PVBA) was synthesized and used as an initiator for the polymerization of methacrylates to synthesize macromonomers with terminal styrenic moieties. LiPVBA initiated a living polymerization and block copolymerization of methyl methacrylate, 2‐(N,N‐dimethylamino)ethyl methacrylate and tert‐butyl methacrylate and produced polymers having well‐controlled molecular weights and very low polydispersities (M̄_w/M̄_n < 1.1) in quantitative yield. ¹H NMR analysis revealed that the polymers contained terminal 4‐vinylbenzyl groups. The macromonomers were reactive in the copolymerization with styrene.     

A new tetradentate ligand for atom transfer radical polymerization

The properties of a ligand, including molecular structure and substituents, strongly affect the catalyst activity and control of the polymerization in atom transfer radical polymerization (ATRP). A new tetradentate ligand, N,N′‐bis(pyridin‐2‐ylmethyl‐3‐hexoxo‐3‐oxopropyl)ethane‐1,2‐diamine (BPED) was synthesized and examined as the ligand of copper halide for ATRP of styrene (St), methyl acrylate (MA), and methyl methacrylate (MMA), and compared with other analogous linear tetrdendate ligands. The BPED ligand was found to significantly promote the activation reaction: the CuBr/BPED complex reacted with the initiators so fast that a large amount of Cu(II)Br₂/BPED was produced and thus the polymerizations were slow for all the monomers. The reaction of CuCl/BPED with the initiator was also fast, but by reducing the catalyst concentration or adding CuCl₂, the activation reaction could be slowed to establish the equilibrium of ATRP for a well‐controlled living polymerization of MA. CuCl/BPED was found very active for the polymerization of MA. For example, 10 mol% of the catalyst relatively to the initiator was sufficient to mediate a living polymerization of MA. The CuCl/BPED, however, could not catalyze a living polymerization of MMA because the resulting CuCl₂/BPED could not deactivate the growing radicals. The effects of the ligand structures on the catalysis of ATRP are also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3553–3562, 2004     

Bifunctional imidodiphosphoric acid‐catalyzed controlled/living ring‐opening polymerization of trimethylene carbonate resulting block, α,ω‐dihydroxy telechelic,and star‐shaped polycarbonates

The ring‐opening polymerization (ROP) of trimethylene carbonate (TMC) using imidodiphosphoric acid (IDPA) as the organocatalyst and benzyl alcohol (BnOH) as the initiator has been investigated. The polymerization proceeded without decarboxylation to afford poly(trimethylene carbonate) (PTMiC) with controlled molecular weight and narrow polydispersity. ¹H NMR, SEC, and MALDI‐TOF MS measurements of the obtained PTMC clearly indicated the quantitative incorporation of the initiator at the chain end. The controlled/living nature for the IDPA‐catalyzed ROP of TMC was confirmed by the kinetic and chain extension experiments. A bifunctional activation mechanism was proposed for IDPA catalysis based on NMR and FTIR studies. Additionally, 1,3‐propanediol, 1,1,1‐trimethylolpropane, and pentaerythritol were used as di‐ol, tri‐, and tetra‐ol initiators, producing the telechelic or star‐shaped polycarbonates with narrow polydispersity indices. The well‐defined diblock copolymers, poly(trimethylene carbonate)‐block‐poly(δ‐valerolactone) and poly(trimethylene carbonate)‐block‐poly(ε‐caprolactone), have been successfully synthesized by using the IDPA catalysis system. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1009–1019     

Mn2(CO)10‐induced controlled/living radical copolymerization of vinyl acetate and methyl acrylate: Spontaneous formation of block copolymers consisting of gradient and homopolymer segments

The controlled/living radical polymerization of vinyl acetate (VAc) and its copolymerization with methyl acrylate (MA) were investigated in bulk or fluoroalcohols using manganese complex [Mn₂(CO)₁₀] in conjunction with an alkyl iodide (R? I) as an initiator under weak visible light. The manganese complex induced the controlled/living radical polymerization of VAc even in the fluoroalcohols without any loss of activity. The R? I/Mn₂(CO)₁₀ system was also effective for the copolymerization of MA and VAc, in which MA was consumed faster than VAc, and then the remaining VAc was continuously and quantitatively consumed after the complete consumption of MA. The ¹H and ¹³C NMR analyses revealed that the obtained products are block copolymers consisting of gradient MA/VAc segments, in which the VAc content gradually increases, and homopoly(VAc). The use of fluoroalcohols as solvents increased the copolymerization rate, controllability of the molecular weights, and copolymerizability of VAc. The saponification of the VAc units in poly(MA‐grad‐VAc)‐block‐poly(VAc) resulted in the corresponding poly(MA‐co‐γ‐lactone)‐block‐poly(vinyl alcohol) due to the intramolecular cyclization between the hydroxyl and neighboring carboxyl groups in the gradient segments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1343–1353, 2009     

Radical ring‐opening copolymerization behavior of vinyloxirane: Synthesis of copolymer from 2‐isopropenyl‐3‐phenyloxirane and styrene and its functionalization

The radical ring‐opening copolymerization of 2‐isopropenyl‐3‐phenyloxirane (1) with styrene (St) was examined to obtain the copolymer [copoly(1‐St)] with a vinyl ether moiety in the main chain. The copolymers were obtained in moderate yields by copolymerization in various feed ratios of 1 and St over 120 °C; the number‐average molecular weights (M_n) were estimated to be 1800–4200 by gel permeation chromatography analysis. The ratio of the vinyl ether and St units of copoly(1‐St) was estimated with the ¹H NMR spectra and varied from 1/7 to 1/14 according to the initial feed ratio of 1 and St. The haloalkoxylation of copoly(1‐St) with ethylene glycol in the presence of N‐chlorosuccinimide produced a new copolymer with alcohol groups and chlorine atoms in the side group in a high yield. The M_n value of the haloalkoxylated polymer was almost the same as that of the starting copoly(1‐St). The incorporated halogen was determined by elemental analysis. The analytical result indicated that over 88% of the vinyl ether groups participated in the haloalkoxylation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3729–3735, 2000     

Ligand‐free SET‐DTLRP of MMA at room temperature

An iodine‐based initiator, 2‐iodo‐2‐methylpropionitrile (CPI), was utilized for the single‐electron transfer and degenerative chain transfer mediated living radical polymerization (SET‐DTLRP) of methyl methacrylate (MMA) in the absence of ligand, at ambient temperature. The CPI‐initiated ligand‐free polymerizations manifested reasonable control over molecular weights with relatively narrow distributions (M_w/M_n ≤ 1.35). The living nature of the polymers was further confirmed by successful chain extension reaction and ¹H NMR with high chain‐end fidelity (～96%). Screening of the available solvents suggested that the controllability of this polymerization was highly dependent on the kind of solvents, wherein dimethyl sulfoxide was a better solvent for a controlled molecular weight. The proposed ligand‐free SET‐DTLRP initiated by CPI was intriguing since it would dramatically decrease the concentration of Cu(0) ions both in polymerization system and resultant polymer, and provided a more economical and eco‐friendly reversible‐deactivation radical polymerization technique. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Copper(0)‐mediated living radical polymerization of acrylonitrile at room temperature

The copper(0)‐catalyzed living radical polymerization of acrylonitrile (AN) was investigated using ethyl 2‐bromoisobutyrate as an initiator and 2,2′‐bipyridine as a ligand. The polymerization proceeded smoothly in dimethyl sulphoxide with higher than 90% conversion in 13 h at 25 °C. The polymerization kept the features of controlled radical polymerization. ¹H NMR spectra proved that the resultant polymer was end‐capped by ethyl 2‐bromoisobutyrate species. Such polymerization technique was also successfully introduced to conduct the copolymerization of styrene (St) and AN to obtain well‐controlled copolymers of St and AN at 25 °C, in which the monomer conversion of St could reach to higher than 90%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Nitroxide‐mediated free‐radical copolymerization of styrene with butyl acrylate

Controlled free‐radical copolymerization of styrene (S) and butyl acrylate (BA) was achieved by using a second‐generation nitroxide, N‐tert‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)] nitroxide (DEPN), and 2,2‐azobisisobutyronitrile (AIBN) at 120 °C. The time‐conversion first‐order plot was linear, and the number‐average molecular weight increased in direct proportion to the ratio of monomer conversion to the initial concentration, providing copolymers with low polydispersity. The monomer reactivity ratios obtained were r_S = 0.74 and r_BA = 0.29, respectively. To analyze the convenience of applying the Mayo–Lewis terminal model, the cumulative copolymer composition against conversion and the individual conversion of each monomer as a function of copolymerization time were studied. The theoretical values of the propagating radical concentration ratio were also examined to investigate the copolymerization rate behavior. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4168–4176, 2004     

Living copolymerization of ethylene/1‐octene with fluorinated FI‐Ti catalyst

Living copolymerization of ethylene and 1‐octene was carried out at room temperature using the fluorinated FI‐Ti catalyst system, bis[N‐(3‐methylsalicylidene)‐2,3,4,5,6‐pentafluoroanilinato] TiCl₂/dried methylaluminoxane, with various 1‐octene concentrations. The comonomer incorporation up to 32.7 mol % was achieved at the 1‐octene feeding ratio of 0.953. The living feature still retained at such a high comonomer level. The copolymer composition drifting was minor in this living copolymerization system despite of a batch process. It was found that the polymerization heterogeneity had a severe effect on the copolymerization kinetics, with the apparent reactivity ratios in slurry significantly different from those in solution. The reactivity ratios were nearly independent of polymerization temperature in the range of 0–35 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of various end‐functionalized polyesters by controlled/living ring‐opening polymerization of lactones using pentafluorophenylbis(triflyl)methane

The ring‐opening polymerizations (ROPs) of ε‐caprolactone (ε‐CL) and δ‐valerolactone (δ‐VL) with pentafluorophenylbis(triflyl)methane (C₆F₅CHTf₂) as the organocatalyst and alcohol initiators were carried out. For the ROP using 3‐phenyl‐1‐propanol (PPA) as the initiator in CH₂Cl₂ at room temperature with the [ε‐CL or δ‐VL]₀/[PPA]₀/[C₆F₅CHTf₂] ratio of 50/1/0.1, the polymerization homogeneously proceeded to afford poly(ε‐caprolactone) (PCL) and poly(δ‐valerolactone) (PVL) having narrow polydispersity indices. The molecular weights of the obtained polymers determined from ¹H NMR spectra showed good agreement with those estimated from the initial ratio of [ε‐CL or δ‐VL]₀/[PPA]₀ and monomer conversions. The ¹H NMR, size exclusion chromatography, and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry measurements strongly indicated that PCL and PVL possessed the 3‐phenylpropoxy group as the α‐chain‐end and the hydroxy group as the ω‐chain‐end. In addition, the controlled/living nature for the C₆F₅CHTf₂‐catalyzed ROP of lactones was confirmed by kinetic and chain‐extension experiments. The block copolymerization of PCL and PVL successfully proceeded to afford PCL‐b‐PVL and PVL‐b‐PCL. In addition, various end‐functionalized PCLs and PVLs with narrow molecular weight distributions were synthesized by the ROP of ε‐CL and δ‐VL using functional initiators, such as 6‐azido‐1‐hexanol, 2‐hydroxyethyl methacrylate, propargyl alcohol, N‐(2‐hydroxyethyl)maleimide, 4‐vinylbenzyl alcohol, 5‐hexen‐1‐ol, and 5‐norbornene‐2‐methanol. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of poly(2‐ethylhexyl acrylate)/clay nanocomposite by in situ living radical polymerization

This investigation reports the preparation of tailor‐made poly(2‐ethylhexyl acrylate) (PEHA) prepared via in situ living radical polymerization in the presence of layered silicates and characterization of this polymer/clay nanocomposite. Being a low T_g (?65 °C) material, PEHA has very good film formation property for which it is used in paints, adhesives, and coating applications. 2‐Ethylhexyl acrylate was polymerized at 90 °C using CuBr and Cu(0) as catalyst in combination with N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) as ligand. A tremendous enhancement in reaction rate and polymerization data was achieved when acetone was added as additive to increase the efficiency of the catalyst system. PEHA/clay nanocomposite was prepared at 90 °C using CuBr as catalyst in combination with PMDETA as ligand. Different types of clay with same loading were also used to study the effect on reaction rate. The molecular weight (M_n) and polydispersity index of the prepared nanocomposites were characterized by size exclusion chromatography. The active end group of the polymer chain was analyzed by ¹H NMR analysis and by chain extension experiment. Polymer/clay interaction was studied by Fourier Transform Infrared spectrometry and wide‐angle X‐ray diffraction analyses. Distribution of clay in the polymer matrix was studied by the transmission electron microscopy. Thermogravimetric analysis showed that thermal stability of PEHA/clay nanocomposite increases on addition of nanoclay. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Fast and effective copper(0)‐mediated simultaneous chain‐ and step‐growth radical polymerization at ambient temperature

Vinyl‐conjugated monomer (methyl acrylate, MA) and allyl 2‐bromopropanoate (ABP)‐possessing unconjugated C?C and active C? Br bonds were polymerized via the Cu(0)‐mediated simultaneous chain‐ and step‐growth radical polymerization at ambient temperature using Cu(0) as catalyst, N,N,N′,N″,N″‐pentamethyldiethylenetriamine as ligand and dimethyl sulfoxide as solvent. The conversion was reached higher than 98% within 20 h. The obtained polymers showed block structure consisting of polyester and vinyl polymer moieties. The Cu(0)‐catalyzed simultaneous chain‐ and step‐growth radical polymerization mechanism was demonstrated by NMR, matrix‐assisted laser desorption ionization time‐of‐flight, and GPC analyses. Furthermore, the obtained copolymers of MA and ABP were further modified with poly(N‐isopropylamide) through radical thiol‐ene “click” chemistry from the terminal double bond. The thermoresponsive behavior of this block copolymer was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3907–3916     

Enolate anionic initiator,sodium deoxybenzoin,for leading living natures by formation of aggregators at the growth chain ends

The living anionic polymerization of n‐hexyl isocyanate (HIC) using a newly developed initiator forming metal–enolate complex, sodium deoxybenzoin (Na‐DB), is reported. For the polymerization of HIC, Na‐DB serves the dual functions of providing controlled fast initiation and efficiently protecting the living chain ends. The use of Na‐DB has resulted in quantitative polymer yields (～100%), effective control of the polymer's molecular weights, and low polydispersity index. To examine the living nature of poly(n‐hexyl isocyanate) (PHIC), block copolymerization of HIC with another isocyanate monomer, 3‐(triethoxysilyl)propyl isocyanate (TESPI), was carried out. The resulting block copolymer, poly(n‐hexyl isocyanate)‐b‐poly(3‐(triethoxysilyl)propyl isocyanate) (PHIC‐b‐PTESPI) was synthesized successfully via living anionic polymerization using Na‐DB with quantitative yield and controlled molecular weight. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Living carbocationic copolymerization of isobutylene with styrene

The carbocationic copolymerization of isobutylene (IB) and styrene (St), initiated by 2‐chloro‐2,4,4‐trimethylpentane/TiCl₄ in 60/40 (v/v) methyl chloride/hexane at ?90 °C, was investigated. At a low total concentration (0.5 mol/L), slow initiation and rapid monomer conversion were observed. At a high total comonomer concentration (3 mol/L), living conditions (a linear semilogarithmic rate and M_n–conversion plots) were found, provided that the St concentration was above a critical value ([St]₀ ～ 0.6 mol/L). The breadth of the molecular weight distribution decreased with increasing IB concentration in the feed, reaching M_w/M_n ～ 1.1. St homopolymerization was also living at a high total concentration, yielding polystyrene with M_n = 82,000 g/mol, the highest molecular weight ever achieved in carbocationic St polymerization. An analysis of this system by both the traditional gravimetric–NMR copolymer composition method and FTIR demonstrated penultimate effects. IB enrichment was found in the copolymers at all feed compositions, with very little drift at a high total concentration and above the critical St concentration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1778–1787, 2007