共查询到20条相似文献,搜索用时 15 毫秒
1.
Yaqin Zhang Yongjun Li Long Sui Guolin Lu Xiaoyu Huang 《Journal of polymer science. Part A, Polymer chemistry》2012,50(10):1890-1899
A series of new well‐defined amphiphilic graft copolymers containing hydrophobic poly(tert‐butyl acrylate) backbone and hydrophilic poly(ethylene oxide) side chains were reported. Reversible addition‐fragmentation chain transfer homopolymerization of tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate was first performed to afford a well‐defined backbone with a narrow molecular weight distribution (Mw/Mn = 1.07). The target poly(tert‐butyl acrylate)‐g‐poly(ethylene oxide) (PtBA‐g‐PEO) graft copolymers with low polydispersities (Mw/Mn = 1.18–1.26) were then synthesized by atom transfer nitroxide radical coupling or single electron transfer‐nitroxide radical coupling reaction using CuBr(Cu)/PMDETA as catalytic system. Fluorescence probe technique was employed to determine the critical micelle concentrations (cmc) of the obtained amphiphilic graft copolymers in aqueous media. Furthermore, PAA‐g‐PEO graft copolymers were obtained by selective acidic hydrolysis of hydrophobic PtBA backbone while PEO side chains kept inert. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
2.
Yaogong Li Yaqin Zhang Dong Yang Jianhua Hu Guolin Lu Xiaoyu Huang 《Journal of polymer science. Part A, Polymer chemistry》2010,48(10):2084-2097
A series of well‐defined amphiphilic star graft copolymers consisting of hydrophilic poly(acrylic acid) backbone and hydrophobic poly(propylene oxide) side chains were synthesized by the sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization and atom transfer nitroxide radical coupling (ATNRC) or single electron transfer‐nitroxide radical coupling (SET‐NRC) reaction followed by the selective hydrolysis of poly(tert‐butyl acrylate) backbone. A Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate, was first homopolymerized via RAFT polymerization using a new star‐like chain‐transfer agent with four arms in a controlled way to give a well‐defined star‐like backbone with a narrow molecular weight distribution (Mw/Mn = 1.23). The grafting‐onto strategy was used to synthesize the well‐defined PtBA‐g‐PPO star graft copolymers with narrow molecular weight distributions (Mw/Mn = 1.14–1.25) via ATNRC or SET‐NRC reaction between the Br‐containing PtBA‐based star‐like backbone and poly(propylene oxide) with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl end group using CuBr/PMDETA or Cu/PMDETA as catalytic system. PAA‐g‐PPO amphiphilic star graft copolymers were obtained by the selective acidic hydrolysis of star‐like PtBA‐based backbone in acidic environment without affecting the side chains. The critical micelle concentrations in aqueous media and brine were determined by the fluorescence probe technique. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2084–2097, 2010 相似文献
3.
Yan Deng Yongjun Li Jing Dai Meidong Lang Xiaoyu Huang 《Journal of polymer science. Part A, Polymer chemistry》2011,49(7):1582-1590
Graphene nanosheets offer intriguing electronic, thermal and mechanical properties and are expected to find a variety of applications in high‐performance nanocomposite materials. The great challenge of exfoliating and dispersing pristine graphite or graphene sheets in various solvents or matrices can be achieved by facilely and properly chemical functionalization of the carbon nanosheets. Here we reported an efficient way to functionalize graphene sheets with presynthesized polymer via a combination of atom transfer nitroxide radical coupling chemistry with the grafting‐onto strategy, which enable us to functionalize graphene sheets with well‐defined polymer synthesized via living radical polymerization. A radical scavenger species, 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO), was firstly anchored onto ? COOH groups on graphene oxide (GO) to afford TEMPO‐functionalized graphene sheets (GS‐TEMPO), meanwhile, the GO sheets were thermally reduced. Next, GS‐TEMPO reacted with Br‐terminated well‐defined poly(N‐isopropylacrylamide) (PNIPAM) homopolymer, which was presynthesized by SET‐LRP, in the presence of CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine to form PNIPAM‐graphene sheets (GS‐PNIPAM) nanocomposite in which the polymers were covalently linked onto the graphene via the alkoxyamine conjunction points. The PNIPAM‐modified graphene sheets are easily dispersible in organic solvents and water, and a temperature‐induced phase transition was founded in the water suspension of GS‐PNIPAM. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011 相似文献
4.
Yan Deng Yongjun Li Jing Dai Meidong Lang Xiaoyu Huang 《Journal of polymer science. Part A, Polymer chemistry》2011,49(22):4747-4755
A mild and efficient strategy is presented for growing thermo‐sensitive polymers directly from the surface of exfoliated graphene oxide (GO). This method involves the covalent attachment of Br‐containing initiating groups onto the surface of GO sheets followed by in situ growing poly[poly(ethylene glycol) ethyl ether methacrylate] (PPEGEEMA) via single‐electron‐transfer living radical polymerization (SET‐LRP). Considering the lack of reactive functional groups on the surface of GO, exfoliated GO sheets were subjected to an epoxide ring opening reaction with tris(hydroxymethyl) aminomethane (TRIS) at room temperature. The initiating groups were grafted onto TRIS‐GO sheets by treating hydroxyls with 2‐bromo‐2‐methylpropionyl bromide at room temperature. PPEGEEMA chains were synthesized by in situ SET‐LRP using CuBr/Me6TREN as catalytic system at 40 °C in H2O/THF. The resulting materials were characterized using a range of testing techniques and it was proved that polymer chains were successfully introduced to the surface of GO sheets. After grafting with PPEGEEMA, the modified GO sheets still maintained the separated single layers and the dispersibility was significantly improved. This TRIS‐GO‐PPEGEEMA hybrid material shows reversible self‐assembly and deassembly in water by switching temperature at about 34 °C. Such smart graphene‐based materials promise important potential applications in thermally responsive nanodevices and microfluidic switches. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011 相似文献
5.
Yan Deng Jin Zhong Zhang Yongjun Li Jianhua Hu Dong Yang Xiaoyu Huang 《Journal of polymer science. Part A, Polymer chemistry》2012,50(21):4451-4458
In this study, we report a mild and efficient strategy for growing thermosensitive polymers directly from the surface of exfoliated graphene oxide (GO). Exfoliated GO sheets were sequentially subject to the epoxide ring‐opening reaction with tris(hydroxymethyl) aminomethane (TRIS) to increase the amount of reactive sites, the esterification with 2‐bromo‐2‐methylpropionyl bromide to introduce the Br‐containing initiating groups, and the surface‐initiated single electron transfer–living radical polymerization of N‐isopropylacrylamide (NIPAM) to tune the molecular weights of grafted polymers. All these reactions were performed at ambient temperature without losing any other oxygen‐containing functionality on GO. The resulting TRIS‐GO‐PNIPAM nanocomposites still maintain the separated single layers in dispersion, and the dispersibilities in organic solvents are significantly improved. Meanwhile, the aqueous dispersion of TRIS‐GO‐PNIPAM shows reversible temperature switching self‐assembly and disassembly behavior at about 40°C. Such smart graphene‐based hybrid materials are promising for applications in nanoelectronics, sensors, and microfluidic switches. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
6.
Yaogong Li Yaqin Zhang Sujuan Zhai Yan Deng Huiming Xiong Guolin Lu Xiaoyu Huang 《Journal of polymer science. Part A, Polymer chemistry》2011,49(1):23-34
Two new amphiphilic star graft copolymers bearing hydrophobic poly(tert‐butyl acrylate) backbone and hydrophilic poly(ethylene oxide) (PEO) side chains with different molecular weights were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization and single electron transfer‐nitroxide radical coupling (SET‐NRC) reaction under mild conditions. RAFT homopolymerization of tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate was mediated by a four‐armed chain transfer agent in a controlled way to afford a well‐defined starlike backbone with a narrow molecular weight distribution (Mw/Mn = 1.26). The target poly(tert‐butyl acrylate)‐g‐PEO (PtBA‐g‐PEO) star graft copolymers were synthesized by SET‐NRC reaction between Br‐containing PtBA‐based starlike backbone and PEO end functionalized with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) group using copper/N,N,N′,N′,N″‐pentamethyldiethylenetriamine as catalytic system at ambient temperature via grafting‐onto strategy. The critical micelle concentration values of the obtained amphiphilic star graft copolymers in aqueous media and brine were determined by fluorescence probe technique using pyrene as probe. Diverse micellar morphologies were formed by varying the content of hydrophilic PEO segment as well as the initial concentration of stock solution. In addition, poly(acrylic acid)‐g‐PEO double hydrophilic star graft copolymers were obtained by selective acidic hydrolysis of hydrophobic PtBA starlike backbone without affecting PEO side chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010 相似文献
7.
Mustafa Y. Sen Judit E. Puskas David E. Dabney Chrys Wesdemiotis Christelle Absalon 《Journal of polymer science. Part A, Polymer chemistry》2010,48(16):3501-3506
A new two‐step synthesis of polyisobutylene (PIB) with precisely one thymine functionality per chain (PIB‐T) is reported. The primary hydroxyl‐functionalized PIB (PIB‐OH) precursor was prepared by direct functionalization via living carbocationic polymerization of isobutylene initiated by the α‐methylstyrene epoxide/TiCl4 system. Matrix assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐ToF MS) of a low molecular weight PIB‐OH precursor demonstrated the effectiveness of direct functionalization by this method. A PIB‐acrylate precursor (PIB‐Ac) was obtained from such a PIB‐OH, and the PIB‐T was subsequently prepared by Michael addition of thymine across the acrylate double bond. MALDI‐ToF MS of the products verified that all polymer chains carried precisely one thymine group. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3501–3506, 2010 相似文献
8.
Hao Guo Xingliang Zheng Xiaoyu Huang 《Journal of polymer science. Part A, Polymer chemistry》2013,51(5):1091-1098
A well‐defined amphiphilic graft copolymer, consisting of hydrophobic polyallene‐based backbone and hydrophilic poly(N‐isopropylacrylamide) (PNIPAM) side chains, was prepared by the combination of living coordination polymerization, single electron transfer‐living radical polymerization (SET‐LRP), and the grafting‐from strategy. First, the double‐bond‐containing backbone was prepared by [(η3‐allyl)NiOCOCF3]2‐initiated living coordination polymerization of 6‐methyl‐1,2‐heptadiene‐4‐ol (MHDO). Next, the pendant hydroxyls in every repeating unit of poly(6‐methyl‐1,2‐heptadiene‐4‐ol) (PMHDO) homopolymer were treated with 2‐chloropropionyl chloride to give PMHDO‐Cl macroinitiator. Finally, PNIPAM side chains were grown from PMHDO backbone via SET‐LRP of N‐isopropylacrylamide initiated by PMHDO‐Cl macroinitiator in N,N‐dimethylformamide/2‐propanol using copper(I) chloride/tris(2‐(dimethylamino)ethyl)amine as catalytic system to afford PMHDO‐g‐PNIPAM graft copolymers with a narrow molecular weight distribution (Mw/Mn = 1.19). The critical micelle concentration (cmc) in water was determined by fluorescence probe technique and the effects of pH and salinity on the cmc of PMHDO‐g‐PNIPAM were also investigated. The micellar morphology was found to be spheres using transmission electron microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013 相似文献
9.
This series of papers concern new materials for possible biological applications created by combining the chemistry of highly reactive cyanoacrylates (CAs) with polyisobutylene (PIB) rubbers. First, a new strategy for the synthesis of CA–telechelic PIBs is described. Subsequently, the strategy is employed for the synthesis of low viscosity (syringible) CA–telechelic three‐arm star PIB [Ø(PIB–CA)3]. The intermediates of the synthesis route are characterized by 1H NMR spectroscopy. Injecting liquid Ø(PIB–CA)3 into living tissue (fresh chicken egg) produces a bolus of crosslinked PIB rubber. The spectacular oxidative resistance of this rubber is documented by its resistance to concentrated HNO3. A structural model of the crosslinked rubber obtained upon contacting Ø(PIB–CA)3 with proteinaceous tissue is proposed. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
10.
Nur Cicek Kekec Mukrime Birgul Akolpoglu Ugur Bozuyuk Seda Kizilel Nihan Nugay Turgut Nugay Joseph P. Kennedy 《先进技术聚合物》2019,30(7):1836-1846
Calcification of implanted biomaterials is highly undesirable and limits clinical applicability. Experiments were carried out to assess the calcification resistance of polyisobutylene (PIB), PIB‐based polyurethane (PIB‐PU), PIB‐PU reinforced with (CH3)3N+CH2CH2CH2NH2 I?‐modified montmorillonite (PIB‐PU/nc), PIB‐based polyurethane urea (PIB‐PUU), PIB‐PU containing S atoms (PIBS‐PU), PIBS‐PU reinforced with (CH3)3N+CH2CH2CH2NH2 I?‐modified montmorillonite (PIBS‐PU/nc), and poly(isobutylene‐b‐styrene‐b‐isobutylene) (SIBS), relative to that of a clinically widely implanted polydimethylsiloxane (PDMS)–based PU, Elast‐Eon (the “control”). Samples were incubated in simulated body fluid for 28 days at 37°C, and the extent of surface calcification was analyzed by scanning electron microscopy (SEM), atomic force microscopy (AFM), energy‐dispersive X‐ray spectroscopy (EDX), X‐ray photoelectron spectroscopy (XPS), and Fourier‐transform‐infrared (FT‐IR) spectroscopy. Whereas the PDMS‐based PU showed extensive calcification, PIB and PIB‐PU containing 72.5% PIB, ie, a polyurethane whose surface is covered with PIB, were free of calcification. PIBS‐PU and PIB‐PUU, ie, polyurethanes that contain S or urea groups, respectively, were slightly calcified. The amine‐modified montmorillonite‐reinforcing agent reduced the extent of calcification. SIBS was found slightly calcified. Evidently, PIB and materials fully coated with PIB are calcification resistant. 相似文献
11.
Xiaoyi Chen Li Yuan Pengyuan Yang Jianhua Hu Dong Yang 《Journal of polymer science. Part A, Polymer chemistry》2011,49(23):4977-4986
Graphene nanosheets offer intriguing electronic, thermal, and mechanical properties and are expected to find a variety of applications in high‐performance nanocomposite materials. Dispersal of graphene nanosheets in polymer hosts and precise interface control are challenging due to their strong interlayer cohesive energy and surface inertia. Here, an efficient strategy is presented for growing polymers directly from the surface of reduced graphene oxide (GO). This method involves the covalent attachment of Br‐containing initiating groups onto the surface of hydrazine hydrate reduced GO via a diazonium addition and the succeeding linking of poly(tert‐butyl methacrylate) (PtBMA) chains (71.7 wt % grafting efficiency) via surface‐initiated single‐electron‐transfer living radical polymerization (SET‐LRP) to graphene nanosheets. The resulting materials were characterized by using a range of testing techniques and it was proved that polymer chains were successfully introduced to the surface of exfoliated graphene sheets. After grafting with PtBMA, the modified graphene sheets still maintained the separated single layers, and the dispersibility was improved significantly. The method is believed to offer possibilities for optimizing the processing properties and interface structure of graphene–polymer nanocomposites. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011. 相似文献
12.
Marcéo A. Milani Raul Quijada Nara R. S. Basso Ana P. Graebin Griselda B. Galland 《Journal of polymer science. Part A, Polymer chemistry》2012,50(17):3598-3605
In this work, the synthesis of polypropylene (PP)/graphene nanosheet (GNS) nanocomposites by in situ polymerization using metallocene catalysts was studied. Initial reactions were performed using rac‐Et(Ind)2ZrCl2 and rac‐Me2Si(Ind)2ZrCl2 catalysts to select the best one to obtain good molecular weight, thermal properties, and tacticity. Subsequently, PP nanocomposites with different loadings of GNS were obtained. GNS from two different sources [Graphite Nacional (GN) and Graphite Aldrich (GA)] have been used, and the differences between the obtained nanocomposites were evaluated. The GNS and nanocomposites were studied by scanning electronic microcopy, transmission electronic microcopy, and X‐ray diffraction. They showed that the GN nanosheets had lower crystal size and diameter than the GA nanosheets and dispersed better in the PP matrix. Differential scanning calorimetry analyses of both types of nanocomposites showed an increase in the crystallization temperature with increasing graphite loading. The polymeric materials were also characterized by GPC, thermogravimetric analysis, and 13C NMR. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
13.
14.
Sujuan Zhai Jing Shang Dong Yang Songyang Wang Jianhua Hu Guolin Lu Xiaoyu Huang 《Journal of polymer science. Part A, Polymer chemistry》2012,50(4):811-820
A series of ferrocene‐based well‐defined amphiphilic graft copolymers, consisting of hydrophilic poly[poly(ethylene glycol) methyl ether acrylate] (PPEGMEA) backbone and hydrophobic poly(2‐acryloyloxyethyl ferrocenecarboxylate) (PAEFC) side chains were synthesized by successive single‐electron‐transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was prepared by SET‐LRP of PEGMEA macromonomer, and it was then treated with lithium di‐isopropylamide and 2‐bromopropionyl bromide at ?78 °C to give PPEGMEA‐Br macroinitiator. The targeted well‐defined graft copolymers with narrow molecular weight distributions (Mw/Mn ≤ 1.32) were synthesized via ATRP of AEFC initiated by PPEGMEA‐Br macroinitiator, and the molecular weights of the backbone and side chains were both controllable. The electro‐chemical behaviors of graft copolymers were studied by cyclic voltammetry, and it was found that graft copolymers were more difficult to be oxidized, and the reversibility of electrode process became less with raising the content of PAEFC segment. The effects of the preparation method, the length of hydrophobic PAEFC segment, and the initial water content on self‐assembly behavior of PPEGMEA‐g‐PAEFC graft copolymers in aqueous media were investigated by transmission electron microscopy. The morphologies of micelles could transform from cylinders to spheres or rods with changing the preparation condition and the length of side chains. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
15.
The synthesis of polypyrrole (PPy)/AgCl nanocomposites with their size ranging around 70–100 nm are achieved by using magnetic ionic liquid as the oxidant in the interface polymerization system. The interface polymerization leads to the formation of uniform and unaggregated nanocomposites with a relatively narrow size distribution confined to submicrometer‐sized domains. The morphology and structure of the nanocomposites are characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, and X‐ray diffraction (XRD). The potential application of PPy/AgCl nanocomposites as a H2O2 biosensor is also reported. Copyright © 2010 John Wiley & Sons, Ltd. Erratum: Magnetic ionic liquid‐assisted synthesis of polypyrrole/AgCl nanocomposites 相似文献
16.
Weidong Zhang Wei Zhang Zhengbiao Zhang Jian Zhu Xiulin Zhu 《Macromolecular rapid communications》2010,31(15):1354-1358
A clickable alkyne monomer, PgMA, was successfully polymerized in a well‐controlled manner via single electron transfer initiation and propagation through the radical addition fragmentation chain transfer (SET‐RAFT) method. The living nature of the polymerization was confirmed by the first‐order kinetic plots, the linear relationships between molecular weights and the monomer conversions while keeping relatively narrow (≤1.55), and the successful chain‐extension with MMA. The better controllability of SET‐RAFT than other CRP methods is attributed to the less competitive termination in view of the presence of the CTA as well as the Cu(II) that is generated in situ. Moreover, a one‐pot/one‐step technique combining SET‐RAFT and “click chemistry” methods has been successfully employed to prepare the side‐chain functionalized polymers.
17.
Bin Dai Caixia Xu Xiaoyu Huang 《Journal of polymer science. Part A, Polymer chemistry》2013,51(8):1880-1886
A well‐defined amphiphilic graft copolymer, poly(6‐methyl‐1,2‐heptadien‐4‐ol)‐g‐poly(2‐(dimethylamino)ethyl methacrylate) (PMHDO‐g‐PDMAEMA), has been synthesized by the combination of living coordination polymerization, single electron transfer‐living radical polymerization (SET‐LRP), and the grafting‐from strategy. PMHDO backbone containing double bonds and pendant hydroxyls was first prepared by [(η3‐allyl)NiOCOCF3]2‐initiated living coordination polymerization of 6‐methyl‐1,2‐heptadien‐4‐ol (MHDO) followed by treating the pendant hydroxyls with 2‐chloropropionyl chloride to give PMHDO‐Cl macroinitiator. SET‐LRP of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) was performed in THF/H2O using PMHDO‐Cl as macroinitiator and CuCl/Me6TREN as catalytic system to afford the well‐defined PMHDO‐g‐PDMAEMA graft copolymer with a narrow molecular weight distribution (Mw/Mn = 1.28). The grafting density was as high as 92%. The critical micelle concentration (cmc) in water was determined by fluorescence probe technique and the micellar morphology was preliminarily explored by transmission electron microscopy. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013 相似文献
18.
Nihan Nugay Kalman Toth Nur Cicek Kekec Turgut Nugay Joseph P. Kennedy 《Journal of polymer science. Part A, Polymer chemistry》2016,54(17):2760-2765
Sulfur‐containing polyisobutylene (PIB)‐based polyurethane nanocomposite (PIBs‐PU/NC) was synthesized using HO? CH2CH2? S? PIB? S? CH2CH2? OH for the soft segment, conventional hard segments of MDI and BDO, and organically modified montmorillonite (OmMMT) nanolayers. The properties of PIBs‐PU/NC containing 72.5% PIB and 0.5% OmMMT were studied and contrasted with unmodified PIBs‐PU. PIBs‐PU/NC produces colorless optically clear films exhibiting enhanced tensile strength, elongation, oxidative–hydrolytic stability, and creep resistance relative to that of PIBs‐PU. FTIR spectroscopy indicates H bonded S atoms between soft and hard segments, and OmMMT nanolayers. DSC and XRD suggest randomly dispersed low‐periodicity crystals and urea groups between galleries. We propose that minute amounts of OmMMT nanolayers become covalently attached to polyurethane chains and beneficially affect properties by acting as co‐chain extender/reinforcing filler. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2760–2765 相似文献
19.
Sven Fleischmann Brad M. Rosen Virgil Percec 《Journal of polymer science. Part A, Polymer chemistry》2010,48(5):1190-1196
Single Electron Transfer‐Living Radical Polymerization (SET‐LRP) represents a robust and versatile method for the rapid synthesis of macromolecules with well defined topology. In SET‐LRP, certain combinations of solvents and ligands facilitate the disproportionation of in situ generated Cu(I) species into “nascent” Cu(0) and Cu(II) species. A combination of heterogeneous and “nascent” Cu(0) activation yields polymers with very high chain end functionality. Under suitable conditions the tolerance toward oxygen must be increased since Cu(0), the activator in SET‐LRP, acts as an oxygen scavenger in all inert gas purification systems. Here we demonstrate that SET‐LRP of methyl acrylate can be conducted in the presence of air. The addition of a small amount of reducing agent hydrazine hydrate to the reaction mixture reduces Cu2O generated by the oxidation of Cu(0) with air, regenerating Cu(0) and allowing for the synthesis of polymers with predictable molecular weight and perfect retention of chain end functionality. The kinetics plots obtained under these conditions were identical to these generated by degassed samples. High conversions were achieved within a very short reaction time. In these SET‐LRP experiments, the reagents were not deoxygenated or subjected to standard degassing procedures such as freeze‐pump‐thaw or nitrogen sparging. This simple SET‐LRP procedure provides an efficient and economical approach to the synthesis of functional macromolecules. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1190–1196, 2010 相似文献
20.
Mohammad Rezaul Karim Jeong Hyun Yeum Min‐Young Lee Mu Sang Lee Kwon Taek Lim 《先进技术聚合物》2009,20(7):639-644
Sulfonated polyaniline‐silver (SPAni‐Ag) hybrid nanocomposites have been synthesized by the in situ reduction using a UV‐curing polymerization method without using any reducing or binding agent. An aqueous solution of aniline and orthoanilinic acid (OA) comonomers, a free‐radical oxidant and silver metal salts were irradiated by UV rays. Reduction of the silver salt in aqueous aniline and OA leads to the formation of silver particles which in turn catalyze the oxidation of comonomers to sulfonated polyaniline (SPAni). The resultant SPAni‐Ag nanocomposites were characterized by using different spectroscopy analyses like UV–visible (UV–Vis), X‐ray diffraction (XRD) and infrared spectroscopy. The absorption bands were revealed to be optically active and the peaks blue‐shifted due to the presence of metallic silver within the SPAni matrix. The XRD patterns displayed both the broad amorphous polymeric and sharp metallic peaks. Scanning electron microscopy and transmission electron microscopy of the nanocomposites showed a uniform size distribution with spherical and granular morphology. Thermogravimetric analysis revealed that the nanocomposites had a better thermal stability than the bulk SPAni. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献