Synthesis and properties of amphoteric copolymer of 5‐vinyltetrazole and vinylbenzyl phosphonic acid

Amphoteric polymers have been studied for various applications such as separation of low molecular weight organic molecules from inorganic salt mixtures, selective ion transport, drug delivery through membranes of biological interest, separation of ionic drugs and proteins, and separation of alcohol and water. Typical amphoteric polymers consist of weak base and weak acid groups. In present study, the copolymerization of 5‐vinyltetrazole (VT) and diisopropyl‐p‐vinylbenzyl phosphate (DIPVBP) via free radical polymerization is studied. The reactivity ratio of VT and DIPVBP, which is calculated from Kelen‐Tudos plot, is 0.251 and 0.345, respectively. The amphoteric copolymer of VT and diisopropyl‐p‐vinylbenzyl phosphonic acid (poly(VT‐co‐VBPA)) is obtained from hydrolysis of the copolymer of VT and DIPVBP (poly(VT‐co‐DIPVBP)). Poly(VT‐co‐VBPA) is thermally stable under 190 °C. The anhydrous proton conductivity of amphoteric poly(VT‐co‐VBPA) can reach 1.54 × 10^‐4 S cm^?1 at 170 °C with an activation energy of 114.7 kJ mol^?1. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3486–3493     

Blue light‐emitting hyperbranched polymers using fluorene‐co‐dibenzothiophene‐S,S‐dioxide as branches

A series of blue light‐emitting hyperbranched polymers comprising poly(fluorene‐co‐dibenzothiophene‐S,S‐dioxide) as the branch and benzene, triphenylamine, or triphenyltriazine as the core were synthesized by an “A₂ + A₂' + B₃” approach of Suzuki polymerization, respectively. All resulted copolymers exhibited quite comparable thermal properties with the glass transition temperatures in the range of 59–68 °C and relatively high decomposition temperatures over 420 °C. Photoluminescent spectra exhibited slight variation with the molar ratio of the dibenzothiophene‐S,S‐dioxide unit and the size of the core units. Polymer light‐emitting devices demonstrated blue emission with excellent stability of electroluminescence. Copolymers based on smaller core units of benzene and triphenylamine exhibited enhanced device performances regarding to that of triphenyltriazine. With the device configuration of ITO/PEDOT:PSS/polymer/CsF/Al, a maximum luminous efficiency of 4.5 cd A^?1 was obtained with Commission Internationale de L'.Eclairage (CIE) coordinates of (0.16, 0.19) for the copolymer PFSO15B. These results indicated that hyperbranched structure can be a promising strategy to attain spectrally stable blue‐light‐emitting polymers with high efficiency. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1043–1051     

Gas‐transport properties in crosslinked polymers. I. Aliphatic polyurethane–acrylate‐based adhesives

The gas‐transport properties of one of a family of well‐known adhesives, Loctite 350^®, were studied. Permeability, solubility, and diffusivity coefficients, together with the activation energies of diffusion and permeation and the solution enthalpy, were determined from 20 to 40 °C for oxygen, nitrogen, carbon dioxide, and methane. Loctite 350^® showed relatively high permselectivity and permeability for the gas pairs O₂/N₂ and CO₂/CH₄, especially for the former. The possibility of preparing very thin layers on various kinds of supports from these photocurable polymers makes them promising materials for gas‐separation devices. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 786–795, 2001     

Synthesis,characterization, and thin‐film properties of 6‐oxoverdazyl polymers prepared by ring‐opening metathesis polymerization

Redox‐active 6‐oxoverdazyl polymers were synthesized via ring‐opening metathesis polymerization (ROMP) and their solution, bulk, and thin‐film properties investigated. Detailed studies of the ROMP method employed confirmed that stable radical polymers with controlled molecular weights and narrow molecular weight distributions (Ð < 1.2) were produced. Thermal gravimetric analysis of a representative example of the title polymers demonstrated stability up to 190 °C, while differential scanning calorimetry studies revealed a glass transition temperature of 152 °C. Comparison of the spectra of 6‐oxoverdazyl monomer 12 and polymer 13 , including FT‐IR, UV‐vis absorption, and electron paramagnetic resonance spectroscopy, was used to confirm the tolerance of the ROMP mechanism for the 6‐oxoverdazyl radical both qualitatively and quantitatively. Cyclic voltammetry studies demonstrated the ambipolar redox properties of polymer 13 (E_1/2,ox = 0.25 and E_1/2,red = ?1.35 V relative to ferrocene/ferrocenium), which were consistent with those of monomer 12 . The charge transport properties of thin films of polymer 13 were studied before and after a potential of 5 V was applied, revealing a drastic drop in the resistivity from 10⁶?10¹⁰ Ω m or more to 1.7 × 10⁴ Ω m and suggesting the potential usefulness of polymer 13 in bistable electronics. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1803–1813     

Copolymerization of 2‐isothiocyanatoethyl methacrylate and 2‐hydroxyethyl methacrylate or methacrylic acid based on a nucleophile‐tolerant property of the isothiocyanato group

Radical copolymerizations of 2‐isothiocyanatoethyl methacrylate (ITEMA) and 2‐hydroxyethyl methacrylate (HEMA) or methacrylic acid (MAA) were examined, and fundamental properties of the obtained copolymers were investigated. The copolymerizations of various ITEMA/HEMA or ITEMA/MAA compositions proceeded effectively in THF or DMF by using 2,2′‐azobisbutyronitrile (AIBN) as an initiator, keeping the isothiocyanato groups and hydroxyl or carboxyl groups unchanged. Glass transition temperatures (T_g)s of poly(ITEMA‐co‐HEMA)s ranged from 68 to 100 °C, and they were thermally stable up to 200 °C. Meanwhile, T_gs of poly(ITEMA‐co‐MAA)s (ITEMA/MAA = 91/9, 76/24) were determined to be 91 and 109 °C, respectively. However, poly(ITEMA‐co‐MAA)s were thermally unstable, and significant weight loss was observed around 180 °C, which may be due to an addition of carboxyl groups to isothiocyanato groups followed by an elimination of COS to form amide structure in the copolymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5221–5229     

A pH‐responsive cyclopolymer having phospho‐ and sulfopropyl pendents in the same repeating unit: Synthesis,characterization, and its application as an antiscalant

A new zwitterionic monomer 3‐[diallyl{3‐(diethoxyphosphoryl)propyl}ammonio]propane‐1‐sulfonate has been synthesized and cyclopolymerized to give the corresponding polyzwitterion (±) (PZ) bearing both phosphonate and sulfonate functionalities on each repeating unit. phosphonate ester hydrolysis in PZ gave a pH‐responsive dibasic polyzwitterionic acid (±) (PZA) bearing ? PO₃H₂ units. The PZA under pH‐induced transformation was converted into polyzwitterion/anion (± ?) (PZAN) and polyzwitterion/dianion (± =) (PZDAN) having respective ? PO₃H^? and ? PO₃^2? units. The polymers′ interesting solubility and viscosity behaviors have been investigated in detail. The apparent protonation constants in salt‐free water and 0.1 M NaCl of the ? PO₃^2? in (± =) (PZDAN) and ? PO₃H^– in (± ?) (PZAN) as well as in their corresponding monomeric units have been determined. Evaluation of antiscaling properties of the PZA using supersaturated solution of CaSO₄ revealed ≈100% scale inhibition efficiency at a meager concentration of 20 ppm for a duration of 45 h at 40 °C. The PZA has the potential to be used effectively as an antiscalant in reverse osmosis plant. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5130–5142     

Contracted helix to stretched helix Rearrangement of an aromatic polyacetylene prepared in n‐hexane with [Rh(norbornadiene)Cl]2‐triethylamine catalyst

p‐n‐Heptylphenylacetylene (pHepPA) was stereoregularly polymerized in n‐hexane at 25 °C using [Rh(nbd)Cl]₂ catalyst (nbd: norbornadiene) and NEt₃, affording the purple‐red Poly( R ) in 97% yield. A 80 °C heat treatment transformed Poly( R ) to the black Poly( B ). The Poly( R ) X‐ray diffraction (XRD) pattern revealed a hexagonal crystal structure comprising contracted cis‐cisoid helices [ ^Hexa Poly( R ) ^CC ]. The 80 °C heat treatment generated two tetragonal crystals: ^Tetra Poly( B ) ^CC containing contracted cis‐cisoid helices and ^Tetra Poly( B ) ^CT containing stretched cis‐transoid helices. The helical diameters before and after heat treatment were estimated using XRD and were consistent with molecular mechanics calculations (MMFF94 force field method). When heated at 80 °C in the solid phase, the λ_max in the diffuse reflective UV–vis spectra of ^Hexa Poly( R ) ^CC shifted from 482 to 560 nm. Additionally, an endothermic transition occurred in the ^Hexa Poly( R ) ^CC differential scanning calorimetric trace at ～80 °C. Therefore, these data corroborated the assertion that ^Hexa Poly( R ) ^CC thermally converted to ^Tetra Poly( B ) ^CC and ^Tetra Poly( B ) ^CT . © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5177–5183     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Polycyclotrimerization of aromatic diynes: Synthesis,thermal stability,and light‐emitting properties of hyperbranched polyarylenes

New aromatic diyne monomers of 1,4‐diethynyl‐2,5‐(dihexyloxy)benzene ( 1 ), 1,6‐diethynyl‐2‐(hexyloxy)naphthalene ( 2 ), and 9,9‐bis(4‐ethynylphenyl)fluorene ( 3 ) are synthesized. Their homopolymerizations and copolymerizations with 1‐octyne ( 4 ) or phenylacetylene ( 5 ) are effected by TaBr₅–Ph₄Sn and CpCo(CO)₂–hν, giving soluble hyperbranched polyarylenes with high molecular weights (M_w up to ～ 2.9 × 10⁵) in high yields (up to 99%). The structures and properties of the polymers are characterized and evaluated by IR, NMR, UV, PL, and TGA analysis. The polymers show excellent thermal stability (T_d > 400 °C) and carbonize when pyrolyzed at 900 °C. Upon photoexcitation, the polymers emit deep blue light in the vicinity of ～400 nm with fluorescence quantum yields up to 92%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4249–4263, 2007     

Poly(arylene ether)s with pendant diphenyl phosphoryl groups: Synthesis,characterization, and thermal properties

A series of poly(arylene ether)s, (PAEs), carrying a pendant diphenyl phosphoryl group were prepared via the nucleophilic aromatic substitution (NAS) reactions of 3,5‐difluorotriphenylphosphine oxide, 6 . The difluoro monomer 6 was synthesized via two‐step reaction sequence and subsequently characterized by ¹H, ¹³C, ¹⁹F, and ³¹P NMR spectroscopy, GC/MS, and elemental analysis. The reactivity of the electrophilic sites in 6 , activated by only a diphenylphosphoryl group located in the meta‐position, in 6 was probed via NMR spectroscopy and model reactions and was determined to be sufficient to undergo typical NAS reactions. High molecular weight, amorphous, organic soluble poly(arylene ether)s, bearing a pendant diphenylphosphoryl group, were prepared via the reaction of 6 with a variety of bis‐phenols under typical NAS conditions. The poly(arylene ether)s were characterized for structure via the use of ¹H, ¹³C, and ³¹P NMR spectroscopy while their thermal properties were evaluated using DSC and TGA analysis. The glass transition temperatures (T_g) of the synthesized PAEs ranged from 143 to 175 °C, while their 5% weight loss temperatures ranged from 467 to 510 °C under nitrogen and from 470 to 526 °C in air. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of physical aging of poly(1‐trimethylsilyl‐1‐propyne) films synthesized with TaCl5 and NbCl5 on gas permeability,fractional free volume,and positron annihilation lifetime spectroscopy parameters

The effect of physical aging on the gas permeability, fractional free volume (FFV), and positron annihilation lifetime spectroscopy (PALS) parameters of dense, isotropic poly(1‐trimethylsilyl‐1‐propyne) (PTMSP) films synthesized with TaCl₅ and NbCl₅ was characterized. As‐cast films were soaked in methanol until an equilibrium amount of methanol was absorbed by the polymer. When the films were removed from methanol, film thickness initially decreased rapidly and was almost constant after 70 h in air for both catalysts. This timescale was much longer than the timescale for complete methanol desorption (ca. 5 h). From the film‐thickness data, the reduction in FFV with time was estimated. For samples prepared with either catalyst, the kinetics of FFV reduction were well‐described by a simple model based on the notion either that free‐volume elements diffuse to the surface of the polymer film and are subsequently eliminated from the sample or that lattice contraction controls polymer densification. Methane permeability decreased rapidly during the first 70 h, which was the same timescale for the thickness change. The decrease in methane permeability was smaller in films prepared with NbCl₅ than with TaCl₅. The logarithm of methane permeability decreased linearly as reciprocal FFV increased, in accordance with free‐volume theory. The PALS results indicate that the concentration of larger free‐volume elements (as indicated by the intensity I₄) decreased with aging time and that the other PALS parameters were not strongly influenced by aging. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1222–1239, 2000     

Unusual effect of molecular weight and concentration on thermoresponsive behaviors of well‐defined water‐soluble semirigid polymers

A series of water‐soluble semirigid thermoresponsive polymers with well‐defined molecular weights based on mesogen‐jacketed liquid crystal polymers (MJLCPs), poly[bis(N‐hydroxyisopropyl pyrrolidone) 2‐vinylterephthalate] (PHIPPVTA) have been synthesized via reversible addition fragmentation chain transfer (RAFT) polymerization. Dynamic light scattering (DLS) revealed that the novel monomer and polymers have thermoresponsive properties with cloud point in the range between 10 and 90 °C. The cloud point was increased by 56.2 °C when the polymer molecular weight increased from 0.47 × 10⁴ g mol^?1 to 3.69 × 10⁴ g mol^?1. In addition, the cloud point of PHIPPVTA was decreased by 18.8 °C with the increase of polymer concentration from 5 to 10 mg mL^?1. A slight increase (0.1–3.5 °C) of cloud point has been observed after knocking off the end‐groups of PHIPPVTA. Moreover, the cloud point of polymer increased with increasing of its molecular weight with or without the trithiocarbonate end‐groups, which showed the opposite trend comparing with other thermoresponsive polymers with flexible backbones. These polymers show a dramatic solvent isotopic effect that the cloud point in D₂O was lower than in H₂O. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Stimuli‐responsive 4‐acryloylmorpholine/4‐acryloylpiperidine copolymers via nitroxide mediated polymerization

4‐acryloylmorpholine/4‐acryloylpiperidine statistical copolymers were synthesized by nitroxide mediated polymerization (NMP) with BlocBuilder unimolecular initiator in dimethylformamide solution at 120 °C. The copolymers had narrow molecular weight distributions (dispersity ? = 1.25–1.35, number average molecular weights M _n = 8.5–13.7 kg mol^?1). The copolymer microstructure was essentially statistical (reactivity ratios r _4AP = 0.81 ± 0.73, r _4AM = 0.73 ± 0.68 based on non‐linear fitting of the Mayo‐Lewis equation). Cloud point temperatures (CPT) in aqueous media were tuned from 11 °C to 92 °C, merely by adjusting the initial monomer composition. Using NMP permitted sharper control of the CPT transitions, compared to the similar copolymer made using conventional radical polymerization. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2160–2170     

Synthesis,characterization, and photovoltaic properties of novel conjugated copolymers derived from phenothiazines

Two novel series of soluble alternating conjugated copolymers comprising 10‐alkylphenothiazine and bithiophene or 3‐pentylthieno[3,2‐b]thiophene moieties were synthesized using palladium‐catalyzed Suzuki coupling reaction. The structures of the polymers and their thermal, photophysical, electrochemical, and photovoltaic properties were characterized and investigated. The polymers exhibited good thermal stability with decomposition temperature in the region of 342–390 °C and their glass transition temperatures (T_g) ranging from 126 to 150 °C. All polymers demonstrate broad optical absorption in the region of 300–500 nm with efficient blue‐green light emission. They showed ambipolar redox properties with low HOMO levels around ?5.13 eV. Polymer solar cells were fabricated using blends of the copolymers and [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) in a 1:1 weight ratio. The maximum power conversion efficiency (η = 0.24%) was measured for the poly[3,7‐ (10‐hexylphenothiazine)‐alt‐bithiophene] as donor under simulated sun light (1000 W/m²). Open circuit voltages of up to 0.8 V have been obtained. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5266–5276, 2007     

Thermoresponsive fluorescent water‐soluble copolymers containing BODIPY dye: Inhibition of H‐aggregation of the BODIPY units in their copolymers by LCST

Novel water‐soluble copolymers containing 4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) dyes were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization. The copolymers with both number‐average molecular weight between 5.0 × 10³ and 5.8 × 10³ and narrow molecular weight distribution (M_w/M_n < 1.19) were obtained by the copolymerization of (2‐dimethylamino)ethyl methacrylate (DMAEMA) and BODIPY‐based methyl methacrylate ( 1 ) with 2,2′‐azobis(isobutyronitrile) (AIBN) as an initiator in the presence of cumyl dithiobenzoate (CDB) as a chain transfer agent (CTA). The structures of the resulting copolymers were characterized by ¹H, ¹³C, and ¹¹B NMR spectroscopies, and the comonomer compositions were good consistent with the feed ratio. Characteristic optical properties of the obtained copolymers were investigated by UV‐vis and PL spectroscopic methods. The copolymers composed of [DMAEMA]: [1] = 98.0:2.0 and 99.4:1.4 led to thermoresponsive polymers having phase separation temperatures at 32 °C and 40 °C, respectively, depending on the compositions of hydrophilic/hydrophobic balances. Further, the effective reversible decrease/increase of the emission intensity of the copolymers led to the reversible formation/inhibition of the H‐aggregation between two BODIPY planes in the copolymers on heating and cooling across the border of LCST. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 627–634, 2010     

Rigid‐rod polyamides and polyimides prepared from 4,3″‐diamino‐2′,6′‐di(2‐naphthyl)‐p‐terphenyl and 2′,6′,3‴,5‴‐tetra(2‐naphthyl)‐4,4″‐diamino‐p‐quinquephenyl

A series of rigid‐rod polyamides and polyimides containing p‐terphenyl or p‐quinquephenyl moieties in backbone as well as naphthyl pendent groups were synthesized from two new aromatic diamines. The polymers were characterized by inherent viscosity, elemental analysis, FT‐IR, ¹H‐NMR, ¹³C‐NMR, X‐ray, differential scanning calorimetry (DSC), thermomechanical analysis (TMA), thermal gravimetric analysis (TGA), isothermal gravimetric analysis, and moisture absorption. All polymers were amorphous and displayed T_g values at 304–337°C. Polyamides dissolved upon heating in polar aprotic solvents containing LiCl as well as CCl₃COOH, whereas polyimides were partially soluble in these solvents. No weight loss was observed up to 377–422°C in N₂ and 355–397°C in air. The anaerobic char yields were 57–69% at 800°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 15–24, 1999     

Synthesis,conformation transition,liquid crystal phase,and self‐assembled morphology of thermosensitive homopolypeptide

Thermosensitive diethylene glycol‐derived poly(L ‐glutamate) homopolypeptides (i.e., poly‐L ‐EG₂‐Glu) with different molecular weights (MW) (M_n,GPC = 5380–32520) were synthesized via the ring‐opening polymerization (ROP) of EG₂‐L ‐glutamate N‐carboxyanhydride (EG₂‐Glu‐NCA) in N,N‐dimethylformamide solution at 50 °C. Their molecular structure, conformation transition, liquid crystal (LC) phase behavior, lower critical solution temperature (LCST) transition, and morphology evolution were thoroughly characterized by means of FTIR, ¹H NMR, gel permeation chromatography, differential scanning calorimetry, wide angle X‐ray diffraction, polarized optical microscope, transmission electron microscope, and dynamic light scattering. In solid state, the homopolypeptide poly‐L ‐EG₂‐Glu presented a conformation transition from α‐helix to β‐sheet with increasing their MW at room temperature, while it mainly assumed an α‐helix of 80–86% in aqueous solution. Poly‐L ‐EG₂‐Glu showed a thermotropic LC phase with a transition temperature of about 100 °C in solid state, while it gave a reversible LCST transition of 34–36 °C in aqueous solution. The amphiphilic homopolypeptide poly‐L ‐EG₂‐Glu self‐assembled into nanostructures in aqueous solution, and their critical aggregation concentrations decreased with increasing MW. Interestingly, their morphology changed from spherical micelles to worm‐like micelles, then to fiber micelles with increasing MW. This work provides a simple method for the generation of different nanostructures from a thermosensitive biodegradable homopolypeptide. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

High performance benzoxazine monomers and polymers containing furan groups

Furan‐containing benzoxazine monomers, 3‐furfuryl‐3,4‐dihydro‐2H‐1,3‐benzoxazine (P‐FBz) and bis(3‐furfuryl‐3,4‐dihydro‐2H‐1,3‐benzoxazinyl)isopropane (BPA‐FBz), were prepared using furfurylamine as a raw material. The chemical structures of P‐FBz and BPA‐FBz were characterized with FTIR, ¹H NMR, elemental analysis, and mass spectrometry. Formation of furfurylamine Mannich bridge networks in the polymerizations of P‐FBz and BPA‐FBz increased the cross‐linking densities and thermal stability of the resulting polybenzoxazines. P‐FBz‐ and BPA‐FBz‐based polymers also exhibited high glass transition temperatures above 300 °C, high char yields, and low flammability with limited oxygen index values of 31. The dielectric (D_k = 3.21–3.39) and mechanical properties (high storage modulus of 3.0–3.9 GPa and low coefficient of thermal expansion of 37.7–45.4 ppm) of the P‐FBz‐ and BPA‐FBz‐based polymers were superior or comparable to other polybenzoxazines. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5267–5282, 2005     

Hydrophilic CO2‐based biodegradable polycarbonates: Synthesis and rapid thermo‐responsive behavior

Common CO₂‐based biodegradable polycarbonates like poly(propylene carbonate) or poly(cyclohexene carbonate) are generally hydrophobic, leading to slow biodegradation rate and poor cell adhesion, which limit their applications in the biomedical field. Here hydrophilic polycarbonates were prepared by one‐pot terpolymerization of CO₂, propylene oxide (PO), and 2‐((2‐(2‐(2‐methoxyethoxy)ethoxy)ethoxy)methyl)oxirane (ME₃MO) using binary Salen Co(III)‐Cl/PPNCl catalyst system. The resultant terpolymers showed one glass transition temperature (T_g), which decreased with the increase of ME₃MO units in the terpolymers (F_ME3MO). Water contact angles of the resultant terpolymers with F_ME3MO of 4.2?23.6% were 68?25°, while that of poly(propylene carbonate) was 90°, indicating that the terpolymers became hydrophlilic. Furthermore, the terpolymers with F_ME3MO more than 25.8% exhibited reversible and rapid thermo‐responsive property in water, and the lower critical solution temperature (LCST) was highly sensitive to F_ME3MO. In particular, aqueous solution of the terpolymer with F_ME3MO of 72.6% showed a LCST around 35.2 °C, close to body temperature, which was promising for biomedical applications, especially for in vivo applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2834–2840.     

Partially bio‐based poly(amide imide)s by polycondensation of aromatic diacylhydrazides based on lignin‐derived phenolic acids and aromatic dianhydrides: Synthesis,characterization, and computational studies

Two new bio‐based diacylhydrazide monomers, namely, 4,4′‐(propane‐1,3‐diylbis(oxy))bis(3‐methoxybenzohydrazide) and 4,4′‐(propane‐1,3‐diylbis(oxy))bis(3,5‐dimethoxybenzohydrazide) were synthesized starting from lignin‐derived phenolic acids, namely, vanillic acid and syringic acid. A series of poly(amide imide)s was synthesized by polycondensation of these diacylhydrazide monomers with commercially available aromatic dianhydrides. Poly(amide imide)s showed inherent viscosity in the range 0.44–0.56 dL g^?1 and exhibited good solubility in organic solvents. Poly(amide imide)s could be cast into transparent, flexible, and tough films from their N ,N‐dimethylacetamide solutions. Poly(amide imide)s showed 10% weight loss in the temperature range 340–364 °C indicating their good thermal stability. Glass transition temperature (T _g) of poly(amide imides)s were measured by DSC and DMA which were in the range 201–223 °C and 214–248 °C, respectively. The T _g values of poly(amide imide)s were dependent on the number methoxy substituents on aromatic rings of diacylhydrazide monomers. Molecular dynamics simulation studies revealed that chain rigidity is the dominant factor for observed trends in T _g. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3636–3645