Systemic Administration of Polymer‐Coated Nano‐Graphene to Deliver Drugs to Glioblastoma

Graphene—2D carbon—has received significant attention thanks to its electronic, thermal, and mechanical properties. Recently, nano‐graphene (nGr) has been investigated as a possible platform for biomedical applications. Here, a polymer‐coated nGr to deliver drugs to glioblastoma after systemic administration is reported. A biodegradable, biocompatible poly(lactide) (PLA) coating enables encapsulation and controlled release of the hydrophobic anticancer drug paclitaxel (PTX), and a hydrophilic poly(ethylene glycol) (PEG) shell increases the solubility of the nGr drug delivery system. Importantly, the polymer coating mediates the interaction of nGr with U‐138 glioblastoma cells and decreases cytotoxicity compared with pristine untreated nGr. PLA‐PEG‐coated nGr is also able to encapsulate PTX at 4.15 wt% and sustains prolonged PTX release for at least 19 d. PTX‐loaded nGr‐PLA‐PEGs are shown to kill up to 20% of U‐138 glioblastoma cells in vitro. Furthermore, nGr‐PLA‐PEG and CNT‐PLA‐PEG, two carbon nanomaterials with different shapes, are able to kill U‐138 in vitro as well as free PTX at significantly lower doses of drug. Finally, in vivo biodistribution of nGr‐PLA‐PEG shows accumulation of nGr in intracranial U‐138 glioblastoma xenografts and organs of the reticuloendothelial system.     

The Toxicity of Silver Nanoparticles Depends on Their Uptake by Cells and Thus on Their Surface Chemistry

A set of three types of silver nanoparticles (Ag NPs) are prepared, which have the same Ag cores, but different surface chemistry. Ag cores are stabilized with mercaptoundecanoic acid (MUA) or with a polymer shell [poly(isobutylene‐alt‐maleic anhydride) (PMA)]. In order to reduce cellular uptake, the polymer‐coated Ag NPs are additionally modified with polyethylene glycol (PEG). Corrosion (oxidation) of the NPs is quantified and their colloidal stability is investigated. MUA‐coated NPs have a much lower colloidal stability than PMA‐coated NPs and are largely agglomerated. All Ag NPs corrode faster in an acidic environment and thus more Ag(I) ions are released inside endosomal/lysosomal compartments. PMA coating does not reduce leaching of Ag(I) ions compared with MUA coating. PEGylation reduces NP cellular uptake and also the toxicity. PMA‐coated NPs have reduced toxicity compared with MUA‐coated NPs. All studied Ag NPs were less toxic than free Ag(I) ions. All in all, the cytotoxicity of Ag NPs is correlated on their uptake by cells and agglomeration behavior.     

Electrical properties of transparent carbon nanotube networks prepared through different techniques

Ultra‐thin, optically transparent and electrically conducting films of pure carbon nanotubes (CNTs) are widely studied thanks to their promise for broad applications. In the present work, we study and compare different deposition techniques for the production of these networks: dip‐coating, spray‐coating, vacuum filtration and electrophoretic deposition on a quartz glass using single‐walled carbon nanotubes (SWCNTs) produced by the HiPCo method. In order to optimize the networks, besides the various deposition techniques we also investigate how the optical and electrical properties vary if the networks are fabricated from different CNTs, all synthesized by the CVD method: SWCNTs, DWCNTs and MWCNTs. As the main criteria for evaluating the quality of these CNT networks we measure the electrical surface resistance at a certain optical transmittance and correlate it to the morphology (homogeneity and roughness) of the networks. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

初始温度及碳源对碳纳米管气相爆轰法合成的影响

改变初始温度以及分别使用甲烷和乙炔气体作碳源时气相爆轰合成碳纳米管,研究了初始温度与不同碳源对碳纳米管的影响。利用X射线衍射(XRD)、透射电镜(TEM)、拉曼(Raman)光谱等对碳纳米管进行表征。结果表明,随着初始温度的升高,所合成的碳纳米管的产量减少且石墨化程度降低,但管壁会变得光滑且管径有所增加。当使用乙炔时,所合成的产物中没有碳纳米管,而是合成了石墨化程度较高的无定形碳,随着催化剂量的增加,产物中碳包覆颗粒增多且包覆层清晰可见,但存在结构缺陷。当初始温度在110~130 ℃时,使用甲烷气体运用气相爆轰的手段是合成碳纳米管的较佳方案。     

The effect of carbon nanotubes on the corrosion and tribological behavior of electroless Ni-P-CNT composite coating

In this study, Ni-P-CNT composite coating was successfully deposited on the surface of copper by electroless plating. X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the coatings. The wear behavior of the coatings was investigated using a pin-on-disk test rig and subsequently friction coefficient data were reported. The corrosion behavior of the Ni-P and Ni-P-CNT coated specimen were evaluated through polarization curves and electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl aqueous solution at the room temperature. The results indicated that the incorporation of carbon nanotubes (CNTs) in the coating improved both tribological behavior and corrosion resistance. These improvements have been attributed to superior mechanical properties, unique topological structure and high chemical stability of nanotubes.     

模板法合成多壁碳纳米管复合材料

以包覆在碳纳米管表面的薄层二氧化锰作为表面再包覆聚苯胺的反应性模板合成了聚苯胺和碳的复合的多壁纳米管的结构,该复合材料在水中显示出很好的分散性．该方法还可以用来合成如聚3,4-乙撑二氧噻吩、聚吡咯、二氧化硅、无定形碳等材料与碳纳米管的复合材料.     

Docetaxel‐Loaded Nanoparticles of Dendritic Amphiphilic Block Copolymer H40‐PLA‐b‐TPGS for Cancer Treatment

A dendritic amphiphilic block copolymer H40‐poly(d,l ‐lactide)‐block‐d‐α‐tocopheryl polyethylene glycol 1000 succinate (H40‐PLA‐b‐TPGS) is synthesized, which is then employed to develop a system of nanoparticles (NPs) loaded with docetaxel (DTX) as a model drug for cancer treatment due to its higher drug‐loading content and drug encapsulation efficiency, smaller particle size, faster drug release, and higher cellular uptake in comparison to the linear PLA polymer NPs and PLA‐b‐TPGS copolymer NPs. The drug‐loaded NPs are prepared by a modified nanoprecipitation method and characterized in terms of size and size distribution, surface morphology, drug release profile, and physical state of DTX. Cellular uptake of coumarin 6‐loaded NPs by MCF‐7 cancer cells is determined by flow cytometry and confocal laser scanning microscopy. The antitumor efficacy of the drug‐loaded NPs is investigated in vitro by MTT assay and in vivo by xenograft tumor model. The 72 h IC50 of the drug formulated in the PLA, PLA‐b‐TPGS, and H40‐PLA‐b‐TPGS NPs is found to be, 1.5 ± 0.3, 0.9 ± 0.1, and 0.15 ± 0.06 μg mL^?1, which are 7.3, 12.2, and 73.3‐fold effective than 11.0 ± 1.2 μg mL^?1 for Taxotere, respectively. Such advantages are further confirmed by the measurement of the tumor size and weight.     

Preparation of carbon nanotubes as the conductive coating layer on flexible thermal-resistant substrate by permeating method and its residual stress analysis

A polyarylate (PAR) substrate was first prepared by hot pressing and then carbon nanotubes (CNTs) were coated on its surface by a low-temperature spraying method. In order to eliminate the residual stress and enhance the adhesive ability between the substrate and the coated CNT layer, an optimal thermo-permeating process is proposed. The relationship between the thickness of the permeating layer and the residual stress of coating layers was investigated. Triple-layer structure models were provided to evaluate the residual stress of coating layers. The experimental results show that if the sample was treated by the optimal thermo-permeating process, its residual stress was dramatically reduced from 1.7×10³ MPa to 0.45 Pa; meanwhile, its adhesive ability was intensively enhanced from 1B to 5B according to ASTM D3359 adhesion classifications.     

三种膜材喷涂尿素前后红外吸收的研究

包膜肥料是目前肥料研究领域中的热点。相关的研究主要集中在包膜材料对包膜肥养分释放的作用机制上,而膜材在包膜前后结构变化的可用信息则较少,此信息是能否直接用膜材研究包膜肥养分控释机理的关键所在。文章分别用以聚乳酸(PLA)、聚丁二酸丁二醇酯(PBS)和聚碳酸酯(PC)为主要材料配制的膜材为对象,研究他们在对尿素包膜前后红外吸收光谱的变化,目的是为利用纯膜材深入研究包膜肥养分控释机理提供理论依据。结果显示PLA和PC在对尿素包膜前后的红外吸收光谱变化较小,而PBS较大。这说明前两种包膜材料能够直接用于研究包膜肥养分释放情况,但PBS不能。     

Composite Cathodes Containing SWCNT@S Coaxial Nanocables: Facile Synthesis,Surface Modification,and Enhanced Performance for Li‐Ion Storage

The arrangement and construction of 1D carbon nanotubes (CNTs) into frameworks with two or more levels of structures is an essential step to demonstrate their intrinsic properties and promising applications for energy storage. Single‐walled CNTs (SWCNTs) are considered to have more excellent properties compared with multiwalled CNTs (MWCNTs), however, how to appropriately use SWCNTs as building blocks for nanocomposite electrodes is not well understood. Here, a composite cathode containing SWCNT@S coaxial nanocables for Li‐S battery is fabricated by a facile melt‐diffusion strategy. Beneficial from its sp² carbon nanostructure, higher specific surface area, larger aspect ratio, and interconnected electron pathway, the SWCNT@S cathode have reversible capacities of 676, 441 and 311 mAh g^?1 for the first discharging at 0.5 C, 100^th discharging at 1.0 C, and discharging at 10.0 C, respectively. These capacities are much higher than the corresponding capacities of the MWCNT@S cathode. By introducing polyethylene glycol (PEG) as a physical barrier to trap the highly polar polysulfide species, the PEG modified SWCNT@S cathode afforded improved reversible capacities. The cycling stability of the reversible capacities is expected to be further improved. The SWCNTs can serve as scaffolds for Li‐S battery with much improved energy storage performance.     

Solute Permeability of Certain Polymeric Films Applied on Aspirin Crystals to Form Microcapsules

A study was carried out to investigate the solute permeability of various polymer films applied on aspirin crystal to form microcapsules. The coating materials were an acrylate methacrylate (AMA), poly 3‐hydroxybutyrate‐hydroxyvalerate (Biopol^®) and poly (lactic‐glycolic) acid (PLGA). Organic solutions of the polymers were applied on the aspirin crystals (core) by a spray coating technique in a Wurster column. The microcapsule surfaces were investigated using scanning electron microscopy (SEM), while permeability studies were carried out on single microcapsules serving as micro dialysis cells. The amount of drug (m) permeating through the applied films in time (t) was analysed on the basis of Fickian diffusion. The SEM revealed numerous surface pores of size range 2.4 to 24 μm for the AMA films, while the PLGA and Biopol films, on the other hand, exhibited very few surface pores of size range 2.2 to 18 μm. However, the AMA films were more spongy than the PLGA and Biopol. The AMA films displayed a retarded release while the PLGA or Biopol films displayed a burst release, attributable to the differences in the film's porous structure. The Permeability coefficient (P) depended on the core weight of the single microcapsules, decreasing with increase in core weight. Thus, for an ensemble of the microcapsules the permeability coefficients of the films of the component microcapsules will have a distribution of P values even though the coating material is the same. This finding is important in the simulation of drug release from coated multiparticulate systems.     

Effect of carbon nanotubes dispersion on morphology, internal structure and thermal stability of electrospun poly(vinyl alcohol)/carbon nanotubes nanofibers

The current work reports the effect of multi walled carbon nanotubes and single walled carbon nanotubes dispersion on morphological, structural and thermal degradation of electrospun poly(vinyl alcohol) (PVA)/carbon nanotubes (CNTs) dispersed in sodium dodecyl sulfate (SDS) (PVA/CNTs–SDS) composites nanofibers. (PVA/CNTs–SDS) nanocomposites fibers were elaborated using the traditional electrospinning process to disperse and align CNTs into the fibers, especially for low CNTs loading fraction: 0.3 and 0.7 wt%. The morphology of the electrospun fibers was studied using the scanning electronic microscopy. The average diameter of the fibers changes significantly after the incorporation of the CNTs in the PVA. Furthermore, Fourier transform infrared spectroscopy elucidated the effect of CNTs on the crystallization of the PVA which was confirmed by X-ray diffraction analysis. Thermogravimetric analysis showed that the thermal stability of the composite fibers depends on the loading fraction and on the type of carbon nanotubes.     

Synthesis of carbon nanotubes by CVD: Effect of acetylene pressure on nanotubes characteristics

The effect of acetylene partial pressure on the structural and morphological properties of multi-walled carbon nanotubes (MWCNTs) synthesized by CVD on iron nanoparticles dispersed in a SiO₂ matrix as catalyst was investigated. The general growing conditions were: 110 cm³/min flow rate, 690 °C synthesis temperature, 180 Torr over pressure and two gas compositions: 2.5% and 10% C₂H₂/N₂. The catalyst and nanotubes were characterized by HR-TEM, SEM and DRX. TGA and DTA were also carried out to study degradation stages of synthesized CNTs. MWCNTs synthesized with low acetylene concentration are more regular and with a lower amount of amorphous carbon than those synthesized with a high concentration. During the synthesis of CNTs, amorphous carbon nanoparticles nucleate on the external wall of the nanotubes. At high acetylene concentration carbon nanoparticles grow, covering all CNTs’ surface, forming a compact coating. The combination of CNTs with this coating of amorphous carbon nanoparticles lead to a material with high decomposition temperature.     

Clustering of Iron Oxide Nanoparticles with Amphiphilic Invertible Polymer Enhances Uptake and Release of Drugs and MRI Properties

A functionalization of iron oxide nanoparticles (NPs) of different diameters by the amphiphilic invertible polymer, (PEG600‐alt‐PTHF650)_k (PEG and PTHF stand for poly(ethylene glycol) and poly(tetrahydrofuran), respectively), leads to different NP/polymer architectures for dye/drug uptake and release, as is reported here for the first time. It is demonstrated that 18.6 ± 1.4 and 11.9 ± 0.6 nm NPs are individually coated by this polymer, while 5.9 ± 0.6 nm NPs form nanoparticle clusters (NPCs) which could be isolated by either ultracentrifugation or magnetic separation. This phenomenon is most likely due to the character of the (PEG600‐alt‐PTHF650)_k macromolecule with alternating hydrophilic and hydrophobic fragments and its dimensions sufficient to cause NP clustering. Utilizing Rhodamine B base (RBB) and doxorubicin (DOX), the data on uptake upon mixing and further release via inversion into octanol (mimicking the penetration of the cell biomembrane) are presented. The magnetic NPCs display enhanced uptake and release of both RBB and DOX most likely due to the higher retained polymer amount. The NPCs also display exceptional magnetic resonance imaging properties. This and the high uptake/release efficiency of the NPCs combined with easy magnetic separation make them promising for theranostic probes for magnetically targeted drug delivery.     

微量水对碳纳米管形貌的影响及其机理研究

利用介质阻挡放电等离子体化学气相沉积技术,在蒸镀有25nm Ni催化剂层的Si基片上,以CH₄和H₂作为反应气体,在973K下制备了碳纳米管,并研究了微量水的引入对碳纳米管形貌的影响.场发射扫描电子显微镜结果表明,不加水时,制备出的碳纳米管直径不均匀,分布在40—90nm之间,呈链节状的结构;加入少量水时,制备出的碳纳米管直径比较均匀,集中在70nm左右,表面为瘤状结构;当水的流量进一步增加时,得到的碳纳米管表面光滑,出现了枝状结构.原位测量了加水前后等离子体区的发射光谱,分析了微量水的引入对于碳纳米管形貌变化的影响机理. 关键词： 碳纳米管 介质阻挡放电 水 发射光谱     

Biocompatible polymeric implants for controlled drug delivery produced by MAPLE

Implants consisting of drug cores coated with polymeric films were developed for delivering drugs in a controlled manner. The polymeric films were produced using matrix assisted pulsed laser evaporation (MAPLE) and consist of poly(lactide-co-glycolide) (PLGA), used individually as well as blended with polyethylene glycol (PEG). Indomethacin (INC) was used as model drug. The implants were tested in vitro (i.e. in conditions similar with those encountered inside the body), for predicting their behavior after implantation at the site of action. To this end, they were immersed in physiological media (i.e. phosphate buffered saline PBS pH 7.4 and blood). At various intervals of PBS immersion (and respectively in blood), the polymeric films coating the drug cores were studied in terms of morphology, chemistry, wettability and blood compatibility. PEG:PLGA film exhibited superior properties as compared to PLGA film, the corresponding implant being thus more suitable for internal use in the human body. In addition, the implant containing PEG:PLGA film provided an efficient and sustained release of the drug. The kinetics of the drug release was consistent with a diffusion mediated mechanism (as revealed by fitting the data with Higuchi's model); the drug was gradually released through the pores formed during PBS immersion. In contrast, the implant containing PLGA film showed poor drug delivery rates and mechanical failure. In this case, fitting the data with Hixson-Crowell model indicated a release mechanism dominated by polymer erosion.     

Particle emissions from laboratory activities involving carbon nanotubes

This site study was conducted in a chemical laboratory to evaluate nanomaterial emissions from 20–30-nm-diameter bundles of single-walled carbon nanotubes (CNTs) during product development activities. Direct-reading instruments were used to monitor the tasks in real time, and airborne particles were collected using various methods to characterize released nanomaterials using electron microscopy and elemental carbon (EC) analyses. CNT clusters and a few high-aspect-ratio particles were identified as being released from some activities. The EC concentration (0.87 μg/m³) at the source of probe sonication was found to be higher than other activities including weighing, mixing, centrifugation, coating, and cutting. Various sampling methods all indicated different levels of CNTs from the activities; however, the sonication process was found to release the highest amounts of CNTs. It can be cautiously concluded that the task of probe sonication possibly released nanomaterials into the laboratory and posed a risk of surface contamination. Based on these results, the sonication of CNT suspension should be covered or conducted inside a ventilated enclosure with proper filtration or a glovebox to minimize the potential of exposure.     

Hot filament CVD of Fe-Cr catalyst for thermal CVD carbon nanotube growth from liquid petroleum gas

A hot filament chemical vapor deposition (HFCVD) method was used to prepare Fe-Cr thin film on Si substrate. The produced layers were used as catalysts for growing carbon nanotubes (CNTs) from liquid petroleum gas (LPG) at 825 °C by thermal CVD (TCVD) method. To characterize the obtained catalysts or CNTs, X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Raman spectroscopy were used. CNTs were grown on HFCVD derived Fe-Cr catalyst with the LPG as carbon source successfully. It was found that an annealing process on catalysts enhances the surface concentration of Cr atoms and reduces the sizes of catalyst particles. The grown CNTs on annealed sample were morphologically denser with smaller diameters compared to the as deposited one. In addition, the effect of filament temperature on CNTs was investigated. By increasing the filament temperature from 850 to 1050 °C the surface density and diameters of CNTs were improved.     

Thermal and Mechanical Properties of Poly(lactic acid)/Modified Carbon Black Composite

Poly(ethylene glycol) (PEG) was added as a plasticizer to the composite of poly(lactic acid) (PLA) and a modified carbon black (MCB). Among the three different molecular weight (M_n = 1000, 2000, 6000) PEGs used, PEG2000 promoted crystallization of PLA and enhanced the nucleation activity of MCB more efficiently than the other two. The crystallization rate of PLA/PEG2000/3 wt% MCB composite was three times that of PLA. Although a small decrease in tensile strength and modulus of elasticity of the composite was found as the PEG content increased, the elongation at break of the PLA/PEG/MCB composites significantly improved. When the PEG2000 content was 15 wt%, the elongation at break of the blend was 90%, 4.5 times that of the neat PLA.     

Field emission characteristics study for ZnO/Ag and ZnO/CNTs composites produced by DC electrophoresis

A simple controllable method is reported for the coating of ZnO nanowires with Ag nanoparticles and ZnO/carbon nanotubes (CNTs) composite. It has been achieved through DC electrophoresis AgNO₃ electrolyte and CNTs in the presence of isopropanol dispersion of ZnO nanowires. In the present work, the influence of Ag nanoparticles and CNTs on the field emission properties of the composite materials is studied. The results of this research demonstrate a remarkable enhancement of field emission current of ZnO nanowires in case of CNTs mixture and Ag nanoparticles coating.