Degradation behaviors of monomethoxy poly(ethylene glycol)‐b‐poly(ε‐caprolactone) nanoparticles in aqueous solution

Monomethoxy poly(ethylene glycol)‐b‐poly(ε‐caprolactone)(MPEG‐b‐PCL) diblock copolymers were synthesized via a ring‐opening polymerization. The polymeric nanoparticles prepared by precipitation/solvent evaporation exhibit a core–shell structure, characterized by dynamic light scattering (DLS), nuclear magnetic resonance (NMR), and atomic force microscopy (AFM). The hydrolytic degradation of those nanoparticles was studied by DLS, NMR, and gel permeation chromatography (GPC). It was found that the molecular weight of PCL block in a copolymer significantly affects the stability of nanoparticles in aqueous solution and nanoparticles with shorter PCL block length degraded faster. The degradation behaviors could be divided into two stages with slow degradation at the interface region via swelling effect and fast degradation at inner core via caves and channels formed by cleavage of ester bonds. Copyright © 2007 John Wiley & Sons, Ltd.     

Natural hydroxyapatite‐supported MnO2: a green heterogeneous catalyst for selective aerobic oxidation of alkylarenes and alcohols

Natural hydroxyapatite‐supported MnO₂ (MnO₂@NHAp) was easily prepared in situ from reduction of potassium permanganate with natural hydroxyapatite derived from cow bones in water at room temperature, and its structure was characterized using flame atomic absorption spectroscopy, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy and energy dispersive spectroscopy. The catalytic activity of the synthesized catalyst was investigated for the aerobic oxidation of alkylarenes and alcohols. MnO₂@NHAp shows excellent catalytic performance for the oxidation of alkylarenes and alcohols to their corresponding carbonyl compounds without using any other oxidizing agent. This catalyst can be readily recycled and reused for several runs without any significant loss of efficiency. Copyright © 2016 John Wiley & Sons, Ltd.     

Methoxy poly(ethylene glycol)‐b‐poly(octadecanoic anhydride)‐b‐methoxy poly(ethylene glycol) amphiphilic triblock copolymer nanoparticles as delivery vehicles for paclitaxel

A series of amphiphilic triblock copolymers, methoxy poly(ethylene glycol)‐b‐poly(octadecanoic anhydride)‐b‐methoxy poly(ethylene glycol) (mPEG‐b‐POA‐b‐mPEG), were prepared via melt polycondensation of methoxy poly(ethylene glycol) (mPEG) and poly(octadecanoic anhydride) (POA). mPEG‐b‐POA‐b‐mPEG were characterized by FTIR, ¹H‐NMR, GPC, DSC, and XRD. Drug‐loaded mPEG‐b‐POA‐b‐mPEG nanoparticles (NPs) with spherical morphology and narrow size polydispersity index were prepared by nanoprecipitation technique with paclitaxel as the model drug. In vitro release behaviors of drug‐loaded NPs present that the biphasic process and the release mechanism of each phase are zero order drug releases. According to this study, mPEG‐b‐POA‐b‐mPEG NPs could serve as suitable delivery agents for paclitaxel and other hydrophobic drugs. Copyright © 2009 John Wiley & Sons, Ltd.     

Palladium–S‐propyl‐2‐aminobenzothioate immobilized on Fe3O4 magnetic nanoparticles as catalyst for Suzuki and Heck reactions in water or poly(ethylene glycol)

A moisture‐ and air‐stable heterogenized palladium catalyst was synthesized by coordination of palladium with S‐propyl‐2‐aminothiobenzamide supported on Fe₃O₄ magnetic nanoparticles. The prepared nanocatalyst was characterized using Fourier transform infrared, energy‐dispersive X‐ray and inductively coupled plasma atomic emission spectroscopies, X‐ray diffraction, vibrating sample magnetometry, transmission and scanning electron microscopies, dynamic laser scattering and thermogravimetric analysis. This catalyst could be dispersed homogeneously in water or poly(ethylene glycol) and further applied as an excellent nano‐organometal catalyst for Suzuki and Heck reactions. The catalyst was easily separated with the assistance of an external magnet from the reaction mixture and reused for several consecutive runs without significant loss of its catalytic efficiency or palladium leaching. The leaching of catalyst was examined using hot filtration and inductively coupled plasma atomic emission spectroscopy. Also, the effects of various reaction parameters on the Suzuki and Heck reactions are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Cu (II)‐β‐cyclodextrin complex stabilized on magnetic nanoparticles: A retrievable hybrid promoter for green synthesis of spiropyrans

The magnetic core of manganese ferrite (MnFe₂O₄) nanoparticles has a significant stability in comparison with ferrite (Fe₃O₄) nanoparticles. The unique supramolecular properties of β‐cyclodextrin (β‐CD), such as hydrophobic cavity, hydrophilic exterior and ‐OH functional groups, make it a good candidate for functionalization and catalytic application. So, a surface‐modified magnetic solid support with the Cu (II)‐β‐CD complex was prepared. The structure of nanoparticles was characterized by Fourier transform‐infrared spectroscopy, X‐ray powder diffraction, thermogravimetric analysis, vibrating‐sample magnetometry, inductively coupled plasma‐optical emission spectrometry and scanning electron microscope analyses. The catalytic activity of these nanoparticles was investigated in the synthesis of spiropyrans and high yields of desired products obtained under green media. Some advantages of this novel catalyst for this reaction are high yields, short reaction times, green solvent and conditions, easy workup procedure, negligible copper leaching, reusability without a significant diminish in catalytic efficiency, and simple separation of nanocatalyst by using an external magnet alongside the environmental compatibility and sustainability.     

Triazole‐based ligands functionalized silica: Effects of ligand denticity and donors on catalytic oxidation activity of Pd nanoparticles

Triazole‐based ligands, tris (triazolyl)methanol (Htbtm), bis (triazolyl)‐phenylmethanol (Hbtm), and phenyl (pyridin‐2‐yl)(triazolyl)methanol (Hpytm), with differences in ligand denticity (i.e., bidentate and tridentate) and type of N donors (i.e., triazole and pyridine) were functionalized onto a silica support to produce the corresponding SiO₂‐ L ( L  = tbtm, btm, pytm). Subsequent reactions with Pd (CH₃COO)₂ in CH₂Cl₂ yielded Pd/SiO₂‐ L . ICP‐MS reveals that Pd loadings are higher with increased N loadings, resulting in the following trend: Pd/SiO₂‐tbtm (0.83 mmol Pd g^?1) > Pd/SiO₂‐btm (0.65 mmol Pd g^?1) ~ Pd/SiO₂‐pytm (0.63 mmol Pd g^?1). Meanwhile, TEM images of the used Pd/SiO₂‐ L catalysts after the first catalytic cycle show that the mean size of Pd NPs is highest with Pd/SiO₂‐pytm (8.5 ± 1.5 nm), followed by Pd/SiO₂‐tbtm (6.4 ± 1.6 nm) and Pd/SiO₂‐btm (4.8 ± 1.3 nm). Based on TONs, catalytic studies toward aerobic oxidation of benzyl alcohol to benzaldehyde at 60 °C in EtOH showed that Pd/SiO₂‐pytm possessed the most active surface Pd(0) atoms, most likely as a result of more labile properties of the pyridine–triazole ligand compared to tris‐ and bis (triazolyl) analogs. ICP‐MS and TEM analysis of Pd/SiO₂‐btm indicate minimal Pd leaching and similar average Pd NPs sizes after 1^st and 5^th catalytic runs, respectively, confirming that SiO₂‐btm is an efficient Pd NPs stabilizer. The Pd/SiO₂‐btm catalyst was also active toward aerobic oxidation of various benzyl alcohol derivatives in EtOH and could be reused for at least 7 reaction cycles without a significant activity loss.     

Lanthanum immobilized on chitosan: a highly efficient heterogeneous catalyst for facile synthesis of novel (α,β‐unsaturated) β‐aminoketones

A new heterogeneous catalyst, lanthanum immobilized on chitosan, was synthesized and used for the aza‐Michael reaction of β‐enaminone under microwave irradiation. The characteristic structural features of the catalyst were determined using Fourier transform infrared spectroscopy, powder X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, transmission and scanning electron microscopies and inductively coupled plasma atomic emission spectroscopy. The stability of the catalyst was evaluated using thermogravimetric analysis. The use of recyclable catalyst and glycerol as solvent makes this procedure environmentally benign and economically viable. Copyright © 2016 John Wiley & Sons, Ltd.     

(E)‐,(Z)‐Parallel Preparative Methods for Stereodefined β,β‐Diaryl‐ and α,β‐Diaryl‐α,β‐unsaturated Esters: Application to the Stereocomplementary Concise Synthesis of Zimelidine

Parallel and practical methods for the preparation of both (E)‐ and (Z)‐β‐aryl¹‐β‐aryl²‐α,β‐unsaturated esters 1 and (E)‐ and (Z)‐α‐aryl¹‐β‐aryl²‐α,β‐unsaturated esters 2 are described. These methods involve accessible, robust, stereocomplementary N‐methylimidazole (NMI)‐mediated enol tosylations (14 examples, 70–99 % yield), as well as stereoretentive Suzuki–Miyaura cross‐couplings (36 examples, 64–99 % yield). The highlighted feature of the present protocol is the use of parallel and stereocomplementary approaches to obtain highly (E)‐ and (Z)‐pure products 1 and 2 by utilizing sequential enol tosylations and cross‐coupling reactions. An expeditious and parallel synthesis of (E)‐ and (Z)‐zimelidine ( 3 ), which is a highly representative selective serotonin reuptake inhibitor (SSRI), was performed by utilizing the present methods.     

5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

Merging Aerobic Oxidation and Enamine Catalysis in the Asymmetric α‐Amination of β‐Ketocarbonyls Using N‐Hydroxycarbamates as Nitrogen Sources

We describe herein an unprecedented asymmetric α‐amination of β‐ketocarbonyls under aerobic conditions. The process is enabled by a simple chiral primary amine through the coupling of a catalytic enamine ester intermediate and a nitrosocarbonyl (generated in situ) derived from N‐hydroxycarbamate. The reaction features high chemoselectivity and excellent enantioselectivity for a broad range of substrates.     

Association of hydrophobically α,ω‐end‐capped poly(2‐methyl‐2‐oxazoline) in water

The α,ω‐end‐capped poly(2‐methyl‐2‐oxazoline) (C_n‐POXZ‐C_n) have been synthesized by a one‐pot process using cationic ring‐opening polymerization with an appropriate initiator and terminating agent. The polymers bearing different alkyl groups C₁₂ and C₁₈ have molecular weight in the range of 2.4 × 10³ to 14 × 10³ with a small polydispersity index. The solution behavior of the free chains has been analyzed in a nonselective solvent, dichloromethane, by small‐angle neutron scattering and dynamic light scattering. These amphiphilic polymers associate in water to form flower‐like micellar structures. Critical micelle concentrations, investigated by fluorescence technique, are in the range of 0.03–0.5 g L^?1 and are dependent on the hydrophilic/lipophilic balance. The structural properties of the aggregates have also been investigated by viscometry. Intrinsic viscosities of these polymers are in the same range as that of the precursors poly(2‐methyl‐2‐oxazoline) (POXZ) and mono‐functionalized polymers. Large viscosity increase corresponding to intermicellar bridging was observed in the vicinity of the micelle overlap concentration. Addition of hydroxypropyl β‐cyclodextrin (HβCD) has dissociated the aggregates and the intrinsic viscosities of the HβCD‐end‐capped chains have become comparable with the ones of POXZ precursor chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2477–2485, 2010     

Reaction of α,β‐unsaturated ketones with cerium(IV) salts in alcohol

Reaction of α,β‐unsaturated ketones with cerium(IV) salts or lanthanide triflates in alcohols gave good yields of the corresponding β‐alkoxy compounds. In the case of 2‐cyclopentenone and 2‐cyclohexenone, the 1,1,3‐trialkoxy acetal derivatives were obtained preferentially accompanied by β‐alkoxyketone, except 2‐cycloheptenone. However, in the reaction of 2‐cycloheptenone with alcohol using cerium(IV) sulfate (CS)‐molecular sieve, 1,1,3‐trialkoxy derivatives were obtained. Also, in the cases of 1‐penten‐3‐one, 4‐hexen‐3‐one and 3‐hepten‐2‐one, 1,1,3‐trialkoxy derivatives were obtained preferentially. Copyright © 2006 John Wiley & Sons, Ltd.     

Characterization of poly(ethylene glycol)‐b‐ poly(ε‐caprolactone) by two‐dimensional liquid chromatography

Block copolymers of ethylene oxide and ε‐caprolactone were synthesized by microwave‐assisted polymerization of ε‐caprolactone with polyethylene glycol monomethyl ethers as initiator. The samples thus obtained were characterized by two‐dimensional liquid chromatography with liquid chromatography at critical conditions as the first and liquid exclusion adsorption chromatography as the second dimension. A full baseline separation of all oligomers could be achieved in both dimensions.     

Tandem IBX‐Promoted Primary Alcohol Oxidation/Opening of Intermediate β,γ‐Diolcarbonate Aldehydes to (E)‐γ‐Hydroxy‐α,β‐enals

A tandem IBX‐promoted oxidation of primary alcohol to aldehyde and opening of intermediate β,γ‐diolcarbonate aldehyde to (E)‐γ‐hydroxy‐α,β‐enal has been developed. Remarkably, the carbonate opening delivered exclusively (E)‐olefin and no over‐oxidation of γ‐hydroxy was observed. The method developed has been extended to complete the stereoselective total synthesis of both (S)‐ and (R)‐coriolides and d ‐xylo‐ and d ‐arabino‐C‐20 guggultetrols.