共查询到20条相似文献,搜索用时 31 毫秒
1.
Cationic ring‐opening polymerization of trimethylene carbonate to α,ω‐dihydroxy telechelic and star‐shaped polycarbonates catalyzed by reusable o‐benzenedisulfonimide
下载免费PDF全文
![点击此处可从《Journal of polymer science. Part A, Polymer chemistry》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Hao Wu Yufeng Ji Zhenjiang Li Xin Wang Qiguo Zhang Saide Cui Wenzhuo Wu Jingjing Liu Kai Guo 《Journal of polymer science. Part A, Polymer chemistry》2015,53(6):729-736
Cationic ring‐opening polymerization of trimethylene carbonate using o‐benzenedisulfonimide as a reusable catalyst under mild conditions was described. The polymerization proceeded homogeneously without decarboxylation and poly(trimethylene carbonates) (PTMCs) were synthesized with well‐controlled molecular weights and narrow polydispersities (Mw/Mn = 1.12–1.18). The spectra of 1H‐NMR, SEC, and MALDI–ToF MS clearly demonstrated the incorporation of the initiator residue into the polymer chains and the controlled/living nature of the polymerizations. Furthermore, the catalyst can be easily recovered, and its efficiency was fully retained. In addition, 1,3‐propanediol, 1,1,1‐trimethylolpropane, and pentaerythritol were successfully used as initiators to produce telechelic and star‐shaped polycarbonates which were determined by intrinsic viscosity experiments. The number of arms estimated by the shrinking factors ( ) were 2.0, 2.6, and 3.5, respectively, indicating the successful syntheses of the two‐, three‐, and four‐armed PTMCs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 729–736 相似文献
2.
Lidia Jasinska Cor E. Koning 《Journal of polymer science. Part A, Polymer chemistry》2010,48(13):2885-2895
Biobased, unsaturated polyesters derived from isosorbide, maleic anhydride, and succinic acid were synthesized and characterized. The presence of maleic anhydride units in the structure of the polyesters allowed converting them into cured coatings by radical copolymerization with crosslinking agents such as 2‐hydroxyethyl methacrylate, N‐vinyl‐2‐pyrrolidinone, acrylic acid or methacrylamide. The investigated polyesters were obtained via bulk polycondensation, catalyzed by titanium(IV) n‐butoxide. 2D NMR and MALDI‐Tof‐MS spectroscopy proved that this polymerization resulted in isomerization of maleic acid units into fumaric ones and in the formation of slightly branched structures by the reaction of isosorbide (end) groups with main chain unsaturated bonds. Moreover, some double bonds proved to have reacted with the condensation by‐product water. The resulting polyesters displayed the expected correlation between variables such as molecular weight and content of unsaturated bonds and their Tg values. Since the thermal properties of the obtained polyesters were appropriate for coating applications, the polymers were crosslinked with unsaturated monomers by radical copolymerization. The crosslinking process was studied using FTIR spectroscopy and by measurements of the soluble part of the cured coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2885–2895, 2010 相似文献
3.
《Journal of polymer science. Part A, Polymer chemistry》2018,56(18):2096-2102
An efficient thermally latent initiation system using dual sulfonium salts, consisting S‐benzylsulfonium salt 1 bearing counter anion and S,S‐dimethylsulfonium salt 2 bearing CH3 counter anion, has been developed for the cationic polymerization of epoxides. Compared to the conventional system using 1 as a thermally latent initiator, the newly developed system allowed significant improvement of stability of epoxy formulations during storage at ambient temperature without sacrificing their curability at elevated temperatures. Such a remarkable performance is attributable to the nucleophilic attack of CH3 to cationic species formed unavoidably by the reaction of 1 with epoxide. Such entrapment of cationic species into the corresponding dormant led to the inhibition of undesirable chain growth of polymers during storage of epoxy formulations. In addition, the dormant can undergo dissociation at elevated temperature to give cationic species, which can readily initiate the polymerization of epoxide. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2096–2102 相似文献
4.
Filippo Samperi Salvatore Battiato Concetto Puglisi Andrea Scamporrino Veronica Ambrogi Laura Ascione Cosimo Carfagna 《Journal of polymer science. Part A, Polymer chemistry》2011,49(16):3615-3630
Linear–hyperbranched hybrid poly(butylene adipate) (HPBA) copolymers were synthesized through a branching reaction between the linear tailored prepolymer terminated with methyl ester groups and different mol percents of the 1,1,1‐tris(hydroxymethyl) propane (TMP) as branching agent, using the titanium(IV) isopropoxide as catalyst, at 180 °C under vacuum for different times. All samples were characterized by NMR and matrix assisted laser desorption/ionization time of flight mass spectrometry (MALDI‐TOF MS). In particular, MALDI‐TOF mass spectra of the unfractionated and size exclusion chromatography (SEC)‐fractionated hyperbranched (HB) samples gave information on their composition, on the end groups as well as on the TMP units present in each family of HB macromolecules. HB chains containing cyclic branches and ether bonds formed by intermolecular transesterification and intramolecular and intermolecular transetherification side reactions, respectively, were also revealed by MALDI‐TOF MS analysis. All samples were also investigated by SEC. The average molar masses (MMs) evaluated by SEC calibrated with the polystyrene (PS) narrow standards were overestimated with respect to those calculated by the SEC/MALDI‐TOF MS self‐ calibration method, which gave reliable values. Moreover, it also showed that the hydrodynamic volume of the HPBA polymers was higher than that of the linear PSs with similar MMs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011 相似文献
5.
Hans R. Kricheldorf Gesa Behnken 《Journal of polymer science. Part A, Polymer chemistry》2009,47(1):231-238
Low molar mass hyperbranched polyesters were prepared by polycondensation of 1,1,1‐tris(hydroxymethyl)ethane and various dimethyl esters of aliphatic dicarboxylic acids in bulk. The usefulness of nontoxic bismuth salts as transesterification catalysts for these polycondensations was studied. The maximum conversion increased, and the reaction time decreased in the following sequence of increasing reactivity: dimethyl sebacate < adipate < glutarate < succinate. Regardless of the monomer combination, gelation occurred at conversions > 91.5%. The hyperbranched structure was proven by 1H NMR spectroscopy and the absence of cyclic elements by MALDI‐TOF mass spectrometry. Quantitative acylation of all CH2OH groups was achieved with an excess of acetic anhydride or methycrylic anhydride. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 231–238, 2009 相似文献
6.
Hua‐Feng Fei Xiaojie Han Bozheng Liu Xiyin Gao Qian Wang Zhijie Zhang Zemin Xie 《Journal of polymer science. Part A, Polymer chemistry》2016,54(6):835-843
Trifluoropropylmethylsiloxane–phenylmethylsiloxane gradient copolysiloxanes were synthesized by anionic and cationic ring‐opening polymerization (ROP) of 1,3,5‐tris(trifluoropropylmethyl)cyclotrisiloxane ( ) and phenylmethylcyclotrisiloxane ( ). The analysis of reactivity ratios revealed that the reactivity of toward anionic ROP was higher than that of ; however, exhibited lower reactivity compared with during the cationic ROP. AB and BAB type gradient copolymers were obtained because of a difference in the reactivity of the monomers. The microstructure of copolymers was characterized by 29Si NMR spectroscopy, gel permeation chromatography, and differential scanning calorimetry. Furthermore, the mechanism for kinetics inverse of copolymerization was proposed based on the results of the optimized molecular configuration. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 835–843 相似文献
7.
Using controlled radical polymerization to confirm the lower critical solution temperature of an N‐(alkoxyalkyl) acrylamide polymer in aqueous solution
下载免费PDF全文
![点击此处可从《Journal of polymer science. Part A, Polymer chemistry》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Xeniya Savelyeva Lucia Li Milan Marić 《Journal of polymer science. Part A, Polymer chemistry》2015,53(1):59-67
N‐(3‐Methoxypropyl) acrylamide (MPAM) was polymerized by controlled radical polymerization (CRP) methods such as nitroxide‐mediated polymerization (NMP) and reversible addition–fragmentation chain‐transfer polymerization (RAFT). CRP was expected to yield well‐defined polymers with sharp lower critical solution temperature (LCST) transitions. NMP with the BlocBuilder (2‐([tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino]oxy)‐2‐methylpropanoic acid) and SG1 ([tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino] oxidanyl) initiating system revealed low yields and lack of control (high dispersity, ? ~ 1.5–1.6, and inhibition of chain growth). However, RAFT was far more effective, with linear number average molecular weight, , versus conversion, X, plots, low ? ~ 1.2–1.4 and the ability to form block copolymers using N,N‐diethylacrylamide (DEAAM) as the second monomer. Poly(MPAM) (with = 13.7–25.3 kg mol?1) thermoresponsive behavior in aqueous media revealed cloud point temperatures (CPT)s between 73 and 92 °C depending on solution concentration (ranging from 1 to 3 wt %). The and the molecular weight distribution were the key factors determining the CPT and the sharpness of the response, respectively. Poly(MPAM)‐b‐poly(DEAAM) block copolymer ( = 22.3 kg mol?1, ? = 1.41, molar composition FDEAAM = 0.38) revealed dual LCSTs with both segments revealing distinctive CPTs (at 75 and 37 °C for poly(MPAM) and poly(DEAAM) blocks, respectively) by both UV–Vis and dynamic light scattering. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 59–67 相似文献
8.
《Journal of polymer science. Part A, Polymer chemistry》2018,56(17):1935-1945
Development of renewable bio‐based unsaturated polyesters is undergoing a renaissance, typified by the use of itaconate and fumarate monomers. The electron‐deficient CC bond found on the corresponding polyesters allows convenient post‐polymerisation modification to give a wide range of polymer properties; this is notably effective for the addition of nucleophilic pendants. However, preservation of unsaturated functionality is blighted by two undesirable side‐reactions, branching/crosslinking and CC isomerisation. Herein, a tentative kinetic study of diethylamine addition to model itaconate and fumarate diesters highlights the significance of undesirable CC isomerisation. In particular, it shows that reversible isomerisation from itaconate to mesaconate (a poor Michael acceptor) is in direct competition with aza‐Michael addition, where the amine Michael donor acts as an isomerisation catalyst. We postulate that undesired formation of mesaconate is responsible for the long reaction times previously reported for itaconate polyester post‐polymerisation modification. This study illustrates the pressing need to overcome this issue of CC isomerisation to enhance post‐polymerisation modification of bio‐based unsaturated polyesters. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1935–1945 相似文献
9.
Jason L. Freeman Justin R. Martin T. Ross Totsch Farid Marashi Nia Jianwei Wang Yuanli Zhang Benjamin Yancey Jeffrey L. Atkinson Christopher M. Lawson Gary M. Gray 《Journal of polymer science. Part A, Polymer chemistry》2016,54(22):3663-3674
The syntheses of a series of substituted polyphosphonates of the type [OP(X)(Ar)O(CH2)12]n (X = O, S, Se; Ar = phenyl, 2,2′‐bithienyl‐5‐yl) are reported. The s for the polyphosphonates range from 1.1 to 4.6 × 104 Da and are significantly higher than those previously reported for polyphosphonates synthesized via polycondensation reactions. Thermal characterization indicates that all of the polymers are in the rubbery state at room temperature and have thermal stabilities as high as 290 °C. The linear absorption spectra, emission spectra, and emission quantum yields of the 2,2′‐bithenyl‐5‐yl substituted polyphosphonates show distinct trends with respect to the chalcogen attached to the phosphorus. Solutions of these polymers show emission at wavelengths ranging from 380 to 400 nm and, depending on the choice of X, the quantum yields are considerably larger than that of 2,2′‐bithiophene. Nonlinear optical measurements of the polyphosphonates with 2,2′‐bithenyl‐5‐yl substituents show that nonlinear absorbance increases with increasing molecular weight of X. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3663–3674 相似文献
10.
Hans R. Kricheldorf Kerstin Bornhorst 《Journal of polymer science. Part A, Polymer chemistry》2007,45(9):1699-1706
Triethylamine‐promoted polycondensations of 5,5′,6,6′‐tetrahydroxy‐3,3, 3′,3′‐tetramethyl spirobisindane (TTSBI) and α,ω‐alkane dicarboxylic acid dichlorides were performed with equimolar feed ratios. Three different procedures were compared. At a TTSBI concentration of 0.05 mol/L, gelation was avoided, and soluble cyclic polyesters having two OH groups per repeat unit were isolated. These polyesters were characterized with 1H NMR spectroscopy, MALDI‐TOF mass spectrometry, and SEC and DSC measurements. All polycondensations with sebacoyl chloride resulted in gelation, regardless of the procedure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1699–1706, 2007 相似文献
11.
Anders Höglund Ann‐Christine Albertsson 《Journal of polymer science. Part A, Polymer chemistry》2008,46(21):7258-7267
The spontaneous reaction of unsaturated double bonds induced by the fragmentation of ether bonds is presented as a method to obtain a crosslinked polymer material. Poly(1,5‐dioxepan‐2‐one) (PDXO) was synthesized using three different polymerization techniques to investigate the influence of the synthesis conditions on the ether bond fragmentation. It was found that thermal fragmentation of the ether bonds in the polymer main chain occurred when the synthesis temperature was 140 °C or higher. The double bonds produced reacted spontaneously to form crosslinks between the polymer chains. The formation of a network structure was confirmed by Fourier transform infrared spectrometry and differential scanning calorimetry. In addition, the low molar mass species released during hydrolysis of the DXO polymers were monitored by ESI‐MS and MALDI‐TOF‐MS. Ether bond fragmentation also occurred during the ionization in the electrospray instrument, but predominantly in the lower mass region. No fragmentation took place during MALDI ionization, but it was possible to detect water‐soluble DXO oligomers with a molar mass up to approximately 5000 g/mol. The results show that ether bond fragmentation can be used to form a network structure of PDXO. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7258–7267, 2008 相似文献
12.
Heterofunctional RAFT‐derived PNIPAM via cascade trithiocarbonate removal and thiol‐yne coupling click reaction
下载免费PDF全文
![点击此处可从《Journal of polymer science. Part A, Polymer chemistry》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Maël Le Bohec Sandie Piogé Sagrario Pascual Laurent Fontaine 《Journal of polymer science. Part A, Polymer chemistry》2017,55(21):3597-3606
An efficient one‐pot process to functionalize the α‐ and ω‐positions of RAFT‐derived poly(N‐isopropylacrylamide) (PNIPAM) by two inherently different mechanistic pathways is reported. The method relies on the RAFT polymerization of NIPAM using a new alkyne‐based RAFT agent, namely 2‐cyano‐5‐oxo‐5‐(prop‐2‐yn‐1‐ylamino)pentan‐2‐yl dodecyltrithiocarbonate (COPYDC) and the combination of thiol‐yne click chemistry and thiocarbonylthio chain‐end removal reactions. COPYDC was prepared in good yield and used as an efficient chain transfer agent during the RAFT polymerization of NIPAM. Well‐defined polymers with controlled molar masses ( = 7500–14,700 g.mol?1) and narrow dispersities (? = 1.18–1.26) are thus obtained. Cascade thiol‐yne click reaction at the alkyne α‐chain end and trithiocarbonate removal at the ω‐chain end are successfully achieved using benzyl mercaptan and excess AIBN. The reported method provides a facile and mild route to heterofunctional telechelic RAFT polymers with predictable molar masses and low dispersities. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3597–3606 相似文献
13.
Boopathy Gnanaprakasam Ekambaram Balaraman Chidambaram Gunanathan David Milstein 《Journal of polymer science. Part A, Polymer chemistry》2012,50(9):1755-1765
The amidation reaction based on catalytic coupling of alcohols with amines previously reported by us, using the pincer complexes 1 and 2 as catalysts, was applied to the generation of polyamides from nonactivated diols and diamines. A range of polymers was prepared, with Mn up to 26.9 kDa. Unlike the traditional syntheses of polyamides based on carboxylic acid derivatives, which require the use of toxic reagents and generate stoichiometric amounts of waste, this process generates only molecular hydrogen as byproduct. Both aromatic and aliphatic diols and diamines were used. Gel permeation chromatography measurements of the dimethylformamide‐soluble polymers and thermal studies of the polyamides were performed. Matrix assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) spectra are also reported. Thermogravimetric analyses studies indicate that the aromatic polyamides (with the exception of the pyridine‐based polyamide) are more thermally stable than the aliphatic ones. This general, environmentally benign method for the synthesis of polyamides is homogeneously catalyzed under neutral conditions by dearomatized ruthenium‐pincer complexes 1 and 2 and proceeds in 1,4‐dioxane under an inert atmosphere. Conditions for polyamidation in the absence of solvent are also reported, using the pincer complex 2 as catalyst. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
14.
Nihan Nugay Turgut Nugay Joseph P. Kennedy 《Journal of polymer science. Part A, Polymer chemistry》2019,57(8):929-935
The synthesis of primary hydroxyl‐telechelic polyisobutylene, HOCH2‐PIB‐CH2OH, often yields product the number average terminal functionality ( ) of which is less than theoretical 2.0, typically = 1.75–1.95. Polyurethane (PU) prepared with such low‐cost imperfect PIB‐diols, unsurprisingly, exhibit poor overall properties. Herein we report that mechanical, rheological, and thermal properties of polyisobutylene‐based polyurethane (PIB‐PU) and PIB‐PU reinforced with organically modified montmorillonite (OmMMT) prepared with PIB‐diol of = 1.85 are significantly enhanced by glycerol. Specifically, we document that calculated minor amounts of glycerol substantially improves tensile strength, ultimate elongation, elastic modulus, toughness, rubbery plateau, flow temperature, creep, permanent set, rate of recovery after loading, and thermal properties of PIB‐PU and OmMMT‐reinforced PIB‐PU prepared with PIB‐diol of = 1.85. The observations are summarized and discussed in terms of chemistry, micromorphology, and viscoelasticity. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 929–935 相似文献
15.
Christopher Barner‐Kowollik Philipp Vana Thomas P. Davis 《Journal of polymer science. Part A, Polymer chemistry》2002,40(5):675-681
Pulsed laser polymerization (PLP) experiments were performed on the bulk polymerization of methyl methacrylate (MMA) at ?34 °C. The aim of this study was to investigate the polymer end groups formed during the photoinitiation process of MMA monomer using 2,2‐dimethoxy‐2‐phenylacetophenone (DMPA) and benzoin as initiators via matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry. Analysis of the MALDI‐TOF spectra indicated that the two radical fragments generated upon pulsed laser irradiation show markedly different reactivity toward MMA: whereas the benzoyl fragment—common to both DMPA and benzoin—clearly participates in the initiation process, the acetal and benzyl alcohol fragments cannot be identified as end groups in the polymer. The complexity of the MALDI‐TOF spectrum strongly increased with increasing laser intensity, this effect being more pronounced in the case of benzoin. This indicates that a cleaner initiation process is at work when DMPA is used as the photoinitiator. In addition, the MALDI‐TOF spectra were analyzed to extract the propagation‐rate coefficient, kp, of MMA at ?34 °C. The obtained value of kp = 43.8 L mol?1 s?1 agrees well with corresponding numbers obtained via size exclusion chromatography (kp = 40.5 L mol?1 s?1). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 675–681, 2002; DOI 10.1002/pola.10150 相似文献
16.
《Journal of polymer science. Part A, Polymer chemistry》2018,56(13):1366-1382
Designing and tuning a copolymerization process to obtain specific material properties is still fundamentally empirical and requires the determination of apparent reactivity ratios rs. To this end, PEG–(MMA–DMAEMA)n copolymers obtained via ATRP of MMA and DMAEMA using a PEG‐based initiator in toluene were analyzed to extract monomer relative reactivities; the impact of changing solvent on the latter was also tested. Differing from previous free radical and controlled radical copolymerizations (CRcoP), we found that DMAEMA is preferentially included ( and ) in toluene; increasing the solvent polarity decreased the gap between rs. With these data, kMC simulations based on the copolymerization terminal model were used to investigate copolymer microstructure, which is not amenable to NMR investigation. kMC simulations evidenced both a gradient‐like nature of the copolymers and a somewhat unexpected qualitative change in the probability of finding MMA‐rich triads along the chain depending on initial feed composition. An additional DFT analysis suggested the likely formation of a DMAEMA:CuBr:2‐2′‐bipyridine complex, which being involved in the regeneration of reactive radicals from dormant species, is expected to locally increase DMAEMA concentration favoring its addition to the growing chains. The formation of such complex is also supported by 1H‐NMR experiments. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1366–1382 相似文献
17.
Mitsutoshi Jikei Daisuke Uchida Kazuya Matsumoto Ryohei Komuro Masataka Sugimoto 《Journal of polymer science. Part A, Polymer chemistry》2014,52(13):1825-1831
Long‐chain branched poly(ether sulfone)s (PESs) were synthesized via self‐polycondensation of AB2 macromonomers. The linear PES oligomers synthesized by self‐polycondensation of 4‐chloro‐4′‐(4‐hydroxyphenyloxy)diphenyl sulfone were terminated with 4‐(3,5‐methoxyphenoxy)‐4′‐fluorodiphenyl sulfone to form AB2 macromonomer precursors. After conversion from methoxy to hydroxy groups, the AB2 macromonomers were self‐polycondensed to form long‐chain branched PESs. NMR measurements support the formation of the target macromonomers ( = 2930–67,800 (g mol?1); Mn = number average molecular weight) and long‐chain branched PESs. Gel permeation chromatography with multiangle light scattering measurements indicated the formation of high‐molecular‐weight (Mw) polymers over 104. The root‐mean‐square radius of gyration (Rg) suggests that the shape of the long‐chain branched PES synthesized from small AB2 macromonomers in solution is similar to that of hyperbranched polymers. Increasing resulted in larger Rg, suggesting a transition from hyperbranched to a linear‐like architecture in the resulting long‐chain branched PESs. Rheological measurements suggested the presence of strongly entangled chains in the long‐chain branched PES. Higher tensile modulus and smaller elongation at the break were observed in the tensile tests of the long‐chain branched PESs. It is assumed that the enhanced molecular entanglement points may act as physical crosslinks at room temperature. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1825–1831 相似文献
18.
《Macromolecular rapid communications》2017,38(12)
Sequence‐regulated polymerization is realized upon sequential cross‐metathesis polymerization (CMP) and exhaustive hydrogenation to afford precision aliphatic polyesters with alternating sequences. This strategy is particularly suitable for the arrangement of well‐known monomer units including glycolic acid, lactic acid, and caprolactic acid on polymer chain in a predetermined sequence. First of all, structurally asymmetric monomers bearing acrylate and α‐olefin terminuses are generated in an efficient and straightforward fashion. Subsequently, cross‐metathesis (co)polymerization of M1 and M2 using the Hoveyda–Grubbs second‐generation catalyst (HG‐II) furnishes P1 – P3 , respectively. Finally, hydrogenation yields the desired saturated polyesters HP1 – HP3 . It is noteworthy that the ε‐caprolactone‐derived unit is generated in situ rather than introduced to tailor‐made monomers prior to CMP. NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) results verify the microstructural periodicity of these precision polyesters. Differential scanning calorimetry (DSC) results reflect that polyesters without methyl side groups exhibit crystallinity, and unsaturated polyester samples show higher glass transition temperatures than their hydrogenated counterparts owing to structural rigidity.
19.
Hyoung‐Joon Jin Duck‐Soo Kim Boo‐Young Lee Mal‐Nam Kim Ick‐Mo Lee Han‐Sup Lee Jin‐San Yoon 《Journal of Polymer Science.Polymer Physics》2000,38(17):2240-2246
Unsaturated groups were introduced into the main chains of poly(butylene succinate) (PBS) by the condensation polymerization of 1,4‐butanediol with succinic acid and maleic acid (MA). The resulting aliphatic polyesters were subjected to chain extension via the unsaturated groups with benzoyl peroxide (BPO), BPO/ethylene glycol dimethacrylate (DF), or BPO/triallyl cyanurate (TF). During the condensation polymerization, some of the cis‐structured maleate was isomerized into the trans‐structured fumarate. The trans‐structured fumarate participated in the chain‐extension reaction with BPO more than the cis‐structured maleate. However, the trans/cis ratio remained practically unchanged when bridging molecules such as DF and TF were used along with BPO. Chain extension of PBS containing 5.7 mol % MA units (PBSM57) resulted in gel formation. Chain extension with BPO/TF made more gels in PBSM57 than chain extension with the other crosslinking agents. Chain extension increased the glass‐transition temperature, decreased the melting temperature and crystallinity, and improved mechanical properties such as elongation and tensile strength. The results of the modified Sturm tests showed that the biodegradability of the unsaturated aliphatic polyesters decreased greatly because of the chain extension. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2240–2246, 2000 相似文献
20.
Gregory B. Kharas Anthony Scola III Kristen Mc Colough Allison Crawford Celeste A. Diener Gilbert Villaseñor 《高分子科学杂志,A辑:纯化学与应用化学》2013,50(3):459-467
Unsaturated polyesters are prepared by transesterification polymerization of diethyl fumarate and 1,4‐cyclohexanedimethanol. The structure of the polyesters was characterized by FT‐IR and 1H‐ and 13C‐NMR spectroscopy. Semicrystalline morphology of the polymers is suggested by DSC analysis with Tg at 21°C and melting at 140°C. The thermogravimetric analysis indicated that the onset of degradation takes place at 300°C. The polyester's structure has significant impact on the properties of the composites prepared by crosslinking the fumarate double bonds with N‐vinyl pyrrolidone in the presence of an inorganic filler, calcium sulfate dihydrate, with the addition of a radical initiator, benzoyl peroxide, at ambient temperatures. The compressive strength and hydrolytic stability of the cement compositions was correlated with structure of the polyesters. 相似文献