Radical copolymerization of alkyl 2‐norbornene‐2‐carboxylate with alkyl acrylates: Facile incorporation of norbornane framework into poly(alkyl acrylate)s

Radical copolymerization of alkyl 2‐norbornene‐2‐carboxylates (alkyl = Me 1a , nBu 1b ) with alkyl acrylates (alkyl = ethyl, methyl, and n‐butyl) was investigated. Copolymerization of 1a,b with the alkyl acrylates initiated by 1,1′‐azobis (cyclohexane‐1‐carbonitrile) at 85 °C proceeded to give random copolymers, although the homopolymerization of 1a,b did not proceed efficiently under the same conditions. Typically, bulk copolymerization of 1a with ethyl acrylate in a feed ratio of 1:3 ([ 1a ]:[EA]) afforded a copolymer with M_n = 33,300 containing 19.4 mol % of 1a unit in the composition. An increase of T_g derived from the incorporation of the rigid norbornane framework was observed, although the extent of the temperature rise was rather moderate. The ternary radical copolymerization of 1a,b /alkyl acrylate/N‐phenylmaleimide proceeded to give copolymers with the three repeating units in the main chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4597–4605, 2007     

New initiator system for the anionic polymerization of (meth)acrylates in toluene. IV. Random copolymerization of (meth)acrylates in toluene initiated by s-BuLi ligated by lithium silanolates

Copolymerization of binary mixtures of alkyl (meth)acrylates has been initiated in toluene by a mixed complex of lithium silanolate  (s-BuMe₂SiOLi) and s-BuLi (molar ratio > 21) formed in situ by reaction of s-BuLi with hexamethylcyclotrisiloxane (D₃). Fully acrylate and methacrylate copolymers, i.e., poly(methyl acrylate-co-n-butyl acrylate), poly(methyl methacrylate-co-ethyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate) of a rather narrow molecular weight distribution have been synthesized. However, copolymerization of alkyl acrylate and methyl methacrylate pairs has completely failed, leading to the selective formation of homopoly(acrylate). As result of the isotactic stereoregulation of the alkyl methacrylate polymerization by the s-BuLi/s-BuMe₂SiOLi initiator, highly isotactic random and block copolymers of (alkyl) methacrylates have been prepared and their thermal behavior analyzed. The structure of isotactic poly(ethyl methacrylate-co-methyl methacrylate) copolymers has been analyzed in more detail by Nuclear Magnetic Resonance (NMR). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2525–2535, 1999     

Controlled random and alternating copolymerization of (meth)acrylates,acrylonitrile, and (meth)acrylamides with vinyl ethers by organotellurium‐, organostibine‐, and organobismuthine‐mediated living radical polymerization reactions

Random and alternating copolymerizations of acrylates, methacrylates, acrylonitorile, and acrylamides with vinyl ethers under organotellurium‐, organostibine‐, and organobismuthine‐mediated living radical polymerization (TERP, SBRP, and BIRP, respectively) have been studied. Structurally well‐controlled random and alternating copolymers with controlled molecular weights and polydispersities were synthesized. The highly alternating copolymerization occurred in a combination of acrylates and vinyl ethers and acrylonitorile and vinyl ethers by using excess amount of vinyl ethers over acrylates and acrylonitorile. On the contrary, alternating copolymerization did not occur in a combination of acrylamides and vinyl ethers even excess amount of vinyl ethers were used. The reactivity of polymer‐end radicals to a vinyl ether was estimated by the theoretical calculations, and it was suggested that the energy level of singly occupied molecular orbital (SOMO) of polymer‐end radical species determined the reactivity. By combining living random and alternating copolymerization with living radical or living cationic polymerization, new block copolymers, such as (PBA‐alt‐PIBVE)‐block‐(PtBA‐co‐PIBVE), PBA‐block‐(PBA‐alt‐PIBVE), and (PTFEA‐alt‐PIBVE)‐block‐PIBVE, with controlled macromolecular structures were successfully synthesized. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Living/controlled copolymerization of acrylates with nonactivated alkenes

The living/controlled copolymerization of methyl acrylate with 1‐alkenes and norbornene derivatives through several radical polymerization techniques has been achieved. These techniques include atom transfer radical polymerization, reversible addition–fragmentation transfer polymerization, nitroxide‐mediated polymerization, and degenerative transfer polymerization. These systems display many of the characteristics of a living polymerization process: the molecular weight increases linearly with the overall conversion, but the polydispersity remains low. Novel block copolymers have been synthesized through the sequential addition of monomers or chain extension. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6175–6192, 2004     

Radical polymerization and copolymerization reactivities of fumarates bearing different alkyl ester groups

Radical polymerization of fumarates bearing different alkyl ester groups (DRF) on the same molecules was investigated. In bulk polymerization of DRF at 60°C initiated with 2,2′-azobis(isobutyronitrile), it was confirmed that the polymerization reactivity depended on the structures of both alkyl ester groups. The introduction of bulky alkyl groups increased the polymerization rate and molecular weight of the polymer because of retardation of bimolecular termination rates. The effect of the ester substituents on the termination was examined by electron spin resonance spectroscopy. The copolymerization reactivities of DRF with styrene were also investigated. © 1993 John Wiley & Sons, Inc.     

Radical copolymerization of cyclic diarsine with vinyl monomers

1,2,4,5‐Tetramethyltetrahydrodiarsenine ( 1 ), a cyclic diarsine compound, was stirred with styrene and a catalytic amount of 2,2′‐azobisisobutyronitrile (AIBN) as a radical initiator at 80 °C for 8 h in toluene to give a copolymer containing arsenic atoms in the backbone. The gel permeation chromatography (GPC) chromatogram of the copolymer showed a single peak. The number‐average molecular weight of the copolymer was estimated to be more than 10,000 by GPC analysis (CHCl₃, polystyrene standards). The structure of the copolymer was confirmed by the ¹H NMR and ¹³C NMR spectra. According to the integral ratio of peaks in the ¹H‐NMR spectrum, the content of 1 in the copolymer was smaller compared to the monomer feed ratio of 1 . Radical copolymerization of 1 with methyl methacrylate also provided the corresponding copolymer in the presence of AIBN, whereas copolymerization with vinyl acetate yielded no polymeric material. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3023–3028, 2004     

Poly(meth)acrylates Obtained by Cascade Reaction

Preparation, purification, and stabilization of functional (meth)acrylates with a high dipole moment are complex, laborious, and expensive processes. In order to avoid purification and stabilization of the highly reactive functional monomers, a concept of cascade reactions was developed comprising enzymatic monomer synthesis and radical polymerization. Transacylation of methyl acrylate (MA) and methyl methacrylate (MMA) with different functional alcohols, diols, and triols (1,2,6‐hexanetriol and glycerol) in the presence of Novozyme 435 led to functional (meth)acrylates. After the removal of the enzyme by means of filtration, removal of excess (meth)acrylate and/or addition of a new monomer, e.g., 2‐hydroxyethyl (meth)acrylate the (co)polymerization via free radical (FRP) or nitroxide mediated radical polymerization (NMP) resulted in poly[(meth)acrylate]s with predefined functionalities. Hydrophilic, hydrophobic as well as ionic repeating units were assembled within the copolymer. The transacylation of MA and MMA with diols and triols carried out under mild conditions is an easy and rapid process and is suitable for the preparation of sensitive monomers.

     

Radical addition fragmentation chain transfer (RAFT) polymerization of ferrocenyl (Meth)acrylates

We report on the controlled free radical homopolymerization of 1‐ferrocenylethyl acrylate as well as of three new ferrocene bearing monomers, namely 4‐ferrocenylbutyl acrylate, 2‐ferrocenylamido‐2‐methylpropyl acrylate, and 4‐ferrocenylbutyl methacrylate, by the RAFT technique. For comparison, the latter monomer was polymerized using ATRP, too. The ferrocene containing monomers were found to be less reactive than their analogues free of ferrocene. The reasons for the low polymerizability are not entirely clear. As the addition of free ferrocene to the reaction mixture did not notably affect the polymerizations, sterical hindrance by the bulky ferrocene moiety fixed on the monomers seems to be the most probable explanation. Molar masses found for 1‐ferrocenylethyl acrylate did not exceed 10,000 g mol^?1, while for 4‐ferrocenylbutyl (meth)acrylate molar masses of 15,000 g mol^?1 could be obtained. With PDIs as low as 1.3 in RAFT polymerization of the monomers, good control over the polymerization was achieved. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Controlled Alternating Copolymerization of (Meth)acrylates and Vinyl Ethers by Using Organoheteroatom‐Mediated Living Radical Polymerization

Alternating copolymers comprised of (meth)acrylates and vinyl ethers with controlled molecular weights and polydispersities were synthesized for the first time by living radical polymerization using organotellurium, stibine, and bismuthine chain transfer agents. Combining living alternating copolymerization and living radical or living cationic polymerization afforded hitherto unavailable block copolymers with controlled macromolecular structures.

     

Polymerization of alkyl (meth)acrylates in the presence of p-quinones

Russian Chemical Bulletin - The azobisisobutyronitrile-initiated polymerization of methyl methacrylate, butyl methacrylate, and butyl acrylate at 60 °C in the presence of p-quinones differing...     

Polymerization of oligo(ethylene glycol) (meth)acrylates: Toward new generations of smart biocompatible materials

Monomers composed of a (meth)acrylate moiety connected to a short poly(ethylene)glycol (PEG) chain are versatile building‐blocks for the preparation of “smart” biorelevant materials. Many of these monomers are commercial and can be easily polymerized by either anionic, free‐radical, or controlled radical polymerization. The latter approach allows synthesis of well‐defined PEG‐based macromolecular architectures such as amphiphilic block copolymers, dense polymer brushes, or biohybrids. Furthermore, the resulting polymers exhibit fascinating solution properties in aqueous medium. Depending on the molecular structure of their monomer units, non linear PEG analogues can be either insoluble in water, readily soluble up to 100 °C, or thermoresponsive. Thus, these polymers can be used for building a wide variety of modern materials such as biosensors, artificial tissues, smart gels for chromatography, and drug carriers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3459–3470, 2008     

Radical copolymerization behavior of a highly fluorinated cyclic olefin with vinyl ether

The copolymerization of a highly fluorinated cyclic monomer, octafluorocyclopentene (OFCPE, M₁), with ethyl vinyl ether (EVE, M₂) was investigated with a radical initiator in bulk. Despite the poor homopolymerizability of each monomer, the copolymerization proceeded successfully, and the molecular weights of the copolymers reached up to more than 10,000. Incorporation of the OFCPE units into the copolymer led to an increase in the glass‐transition point. The copolymer composition was determined from ¹H NMR spectra and elemental analysis data. The molar fraction of the OFCPE unit in the copolymer increased and approached but did not exceed 0.5. The monomer reactivity ratios were estimated by the Yamada–Itahashi–Otsu nonlinear least‐squares procedure as r_1,OFCPE = ?0.008 ± 0.010 and r_2,EVE = 0.192 ± 0.015. The reactivity ratios clearly suggest that the copolymerization proceeds alternatively in the case of an excessive feed of OFCPE. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1151–1156, 2002     

Frontal free‐radical copolymerization of urethane–acrylates

We report the first synthesis of urethane–acrylate copolymers via free‐radical frontal polymerization. In a typical run, the appropriate amounts of the reactants (urethane–acrylate macromonomer and 2‐hydroxyethyl acrylate) and initiator (ammonium persulfate) were dissolved in dimethyl sulfoxide. Frontal polymerization was initiated by the heating of the wall of the tube with a soldering iron, and the resultant hot fronts were allowed to self‐propagate throughout the reaction vessel. Once it was initiated, no further energy was required for the polymerization to occur. The dependence of the front velocity and front temperature on the initiator concentration was investigated. The front temperatures were between 55 and 65 °C, depending on the persulfate concentration. Thermogravimetric analysis indicated that the urethane–acrylate copolymers had higher thermal stability than pure frontally prepared polyurethane. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3018–3024, 2006     

Atom transfer radical polymerization of (meth)acrylates and their novel block copolymers with vinyl acetate

Homopolymerization of methyl acrylate (MA) and methyl methacrylate (MMA) by atom transfer radical polymerization (ATRP) were carried out at 90 °C using methyl-2-bromopropionate (MBP) as initiator, copper halide (CuX, X=Cl, Br) as catalyst, 2,2^′-bipyridine (bpy) or N,N,N^′,N^′,N^″-pentamethyldiethylenetriamine (PMDETA) as ligand in 1-butanol (less polar and containing OH) and acetonitrile (more polar) solvents. It was found that with CuCl/bpy catalyst ATRP of MA and MMA in 1-butanol proceeded faster than that in acetonitrile. The rate of ATRP of MA and MMA in acetonitrile and 1-butanol was comparable when CuCl/PMDETA used as catalyst system. The number-average molecular weights increased with conversion and polydispersities were low . The ATRP of MA and MMA with vinyl acetate telomer having trichloromethyl end group (PVAc-CCl₃) were also used to synthesize new block copolymers. The structures and molecular weight of synthesized PVAc-b-PMA and PVAc-b-PMMA were characterized by ¹H NMR, FTIR spectroscopy and gel permeation chromatography (GPC) and shown that the block copolymers were novel.     

Radical chemistry of alkyl aluminum with quinoxaline ligands

The behavior of organo-aluminum species with 2,3-bis(2-pyridyl) quinoxaline (DPQ), a well-known polyazine capable of performing interesting radical transformations, was examined in the presence and absence of chromium. In spite of proving the presence of chromium as essential for reactivity, only organic radicals, coupled to aluminum-containing residues, have been isolated and characterized. The electronic structure of the organic radicals has been elucidated by a combination of crystallographic, DFT calculations and EPR studies. Experimental and computational work has highlighted the co-existence of both singlet and triplet forms in one di-radical complex.     

原子转移自由基聚合合成(甲基)丙烯酸酯类模型聚合物及其动力学研究

本文采用一种新颖的活性自由基聚合—原子转移自由基聚合（ＡＴＲＰ）的方法，以１－溴代苯乙烷作为引发剂，过渡金属卤化物与配位剂络合物（ＣｕＢｒ／２，２’－联吡啶）为催化体系，环己酮为溶剂，进行了甲基丙烯酸正丁酯（ＢＭＡ）和丙烯酸正丁酯（ＢＡ）的活性聚合。得到具有指定分子量和窄分子量分布（１．２＜Ｍｗ／Ｍｎ＜１．５）的模型聚合物。计算并讨论了两聚合体系的ＡＴＲＰ的动力学数据     

Radical alternating copolymerization of vinyl ethers

New alternating equimolar copolymers of electrophilic trisubstituted ethylenes, methyl 3-phenyl-2-cyanopropenoate and 2-phenyl-1,1-dicyanoethene, with ethyl, n-butyl, i-butyl, t-butyl, 2-chloroethyl, and phenyl vinyl ethers were prepared by free radical initiation. Chemical compositions of the copolymers are 1 : 1 in broad ranges of monomer ratios. The copolymerization rate of both electrophilic monomers with the vinyl ethers increase in the series 2-chloroethyl > ethyl > phenyl > n-butyl > i-butyl > t-butyl. These variations in the reactivity of the vinyl ethers are discussed in terms of their preferred conformations in donor-acceptor complexes with electrophilic trisubstituted ethylenes. © 1993 John Wiley & Sons, Inc.     

Effect of Lewis and Brønsted acids on the homopolymerization of acrylates and their copolymerization with 1‐alkenes

The first copolymerization of acrylate and methacrylate with nonpolar 1‐alkenes in the presence of Brønsted acids as complexation agents has been reported. The addition of both homogeneous and heterogeneous Brønsted acids resulted in increased monomer conversion and 1‐alkene incorporation. Further, the heterogeneous Brønsted acids can be recycled without loss of activity. A direct correlation exists between the ability of the Lewis or Brønsted acid to bind to the ester group of the acrylate/methacrylate monomer and its ability to promote the copolymerization reaction. For Lewis acids, there is also a direct correlation between the charge/size ratio at the metal center and their ability to promote copolymerizations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5499–5505, 2008