Direct synthesis of terminally “clickable” linear and hyperbranched polyesters

1,3‐Dipolar cycloaddition of an organic azide and an acetylenic unit, often referred to as the “click reaction”, has become an important ligation tool both in the context of materials chemistry and biology. Thus, development of simple approaches to directly generate polymers that bear either an azide or an alkyne unit has gained considerable importance. We describe here a straightforward approach to directly prepare linear and hyperbranched polyesters that carry terminal propargyl groups. To achieve the former, we designed an AB‐type monomer that carries a hydroxyl group and a propargyl ester, which upon self‐condensation under standard transesterification conditions yielded a polyester that carries a single propargyl group at one of its chain‐ends. Similarly, an AB₂ type monomer that carries one hydroxyl group and two propargyl ester groups, when polymerized under the same conditions yielded a hyperbranched polymer with numerous “clickable” propargyl groups at its molecular periphery. These propargyl groups can be readily clicked with different organic azides, such as benzyl azide, ω‐azido heptaethyleneglycol monomethylether or 9‐azidomethyl anthracene. When an anthracene chromophore is clicked, the molecular weight of the linear polyester could be readily estimated using both UV–visible and fluorescence spectroscopic measurements. Furthermore, the reactive propargyl end group could also provide an opportunity to prepare block copolymers in the case of linear polyesters and to generate nanodimensional scaffolds to anchor a variety of functional units, in the case of the hyperbranched polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3200–3208, 2010     

Synthesis and self‐assembly of hyperbranched polymers with benzoyl terminal arms

Hyperbranched polyesters (HPs) with a variable content of benzoyl terminal groups were synthesized through the chemical modification of the HPs' cores by substituting a controlled fraction of the terminal hydroxyl groups with benzoyl chloride. The resulting hyperbranched polymers that were modified by benzoyl groups (HPs‐B) were characterized by ¹H NMR, FTIR, differential scanning calorimetry (DSC), and gel permeation chromatography (GPC). Research results revealed that self‐assembled structures could be formed in selected solvents (acetone/n‐hexane). It was found that the morphologies of self‐assembled structures could be adjusted by controlling the content of outside benzoyl terminal groups in the hyperbranched polymers, the volume ratio of acetone with n‐hexane, and the concentration of the hyperbranched polymers with benzoyl terminal arms. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5554–5561, 2005     

Synthesis,photochemical and phase behavior of linear and hyperbranched photoactive benzylidene liquid‐crystalline polyesters

Photoactive hyperbranched benzylidene liquid‐crystalline polyester (PAHBP) and photoactive linear benzylidene liquid‐crystalline polyester (PALBP) were synthesized by solution polycondensation with pyridine as an acid acceptor. PAHBP and PALBP were thoroughly characterized with Fourier transform infrared, ¹H and ¹³C NMR, ultraviolet–visible spectrophotometry, fluorescent spectrophotometry, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, and polarized optical microscopy. Both polymers exhibited nematic mesophase. The glass‐transition temperature and liquid‐crystalline isotropic temperature of PAHBP were higher than those of PALBP. During photolysis under ultraviolet light, both polymers underwent an intermolecular photocycloaddition reaction, and the photoactivity of PAHBP was faster than that of PALBP; this was further confirmed by photoviscosity studies. PALBP and PAHBP were fluorescent in nature. An increase in the fluorescence intensity with the time of ultraviolet‐light irradiation was observed for both PAHBP and PALBP. The rate of increase in the fluorescence intensity of the linear analogue (PALBP) was higher than that of the hyperbranched polymer (PAHBP). This behavior could be attributed to the attainment of better planarity in the case of the linear one but not in the case of PAHBP because of the rapid crosslinking of PAHBP leading to an irregular architecture. This behavior was further confirmed by the calculation of the steric energy from corresponding model compounds. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3986–3994, 2006     

Synthesis of imidazole‐terminated hyperbranched polymers with POSS‐branching points and their pH responsive and coordination properties

An imidazole‐terminated hyperbranched polymer with octafunctional POSS branching units denoted as POSS‐HYPAM‐Im was prepared by the polymerization of excess amounts of tris(2‐aminoethyl)amine with the first‐generation methyl ester‐terminated POSS‐core poly(amidoamine)‐typed dendrimer, reacting with methyl acrylate, and ester‐amide exchange reaction with 3‐aminopropylimidazole. The imidazole‐terminated hyperbranched poly(amidoamine) denoted as HYPAM‐Im was also synthesized with 1‐(3‐aminopropyl)imidazole from a methyl ester‐terminated hyperbranched poly(amidoamine) by the ester‐amide exchange reaction. The transmittance of the POSS‐HYPAM‐Im solution drastically decreased when the solution pH was greater than 8.2. On the other hand, the transmittance of the HYPAM‐Im solution gradually decreased when the solution pH at 8.5 and was greater than 9. Spectrophotometric titrations of the hyperbranched polymer aqueous solutions with Cu²⁺ ions indicated the variation of the coordination modes of POSS‐HYPAM‐Im from the Cu²⁺–N₄ complex to the Cu²⁺–N₂O₂ complex and the existence of the only one complexation mode of Cu²⁺–N₄ between Cu²⁺ ion and HYPAM‐Im with increasing the concentrations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2695–2701     

One‐pot synthesis of soluble and fluorescent aliphatic hyperbranched poly(amide‐imide) with solvent‐dependent emission

Aliphatic hyperbranched poly(amide‐imide) was facilely prepared by employing a functional thiolactone‐maleimide monomer. Highly efficient, selective and quantitative properties of amine‐maleimide Michael addition and aminolysis of a thiolactone guaranteed the generation of an ABB' thiol‐yne intermediate without side products, followed by consecutive thiol‐yne click reaction in one‐pot. The hyperbranched structure of the poly(amide‐imide) was confirmed by NMR spectroscopy and triple‐detector GPC/SEC analysis. Additionally, due to the presence of aminosuccinimide fluorophores and intrinsic physical property of hyperbranched polymers, this aliphatic hyperbranched poly(amide‐imide) possessed solvent‐dependent emission and presented good solubility in various organic solvents. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2053–2060     

Synthesis of a novel one‐pot approach of hyperbranched polyurethanes and their properties

A new method for the synthesis of hyperbranched polymers involving the use of AB_x macromonomers containing linear units have been investigated. Two types of novel hyperbranched polyurethanes have been synthesized by a one‐pot approach. The structures of monomers and polymers were characterized by elemental analysis, ¹H NMR, ¹³C NMR, Fourier transform infrared spectroscopy, gel permeation chromatography, and thermogravimetric analysis. The hyperbranched polymers have been proven to be extremely soluble in a wide range of solvents. Polymer electrolytes were prepared with hyperbranched polymer, linear polymer as the host, and lithium perchlorate (LiClO₄) as the ion source. Analysis of the isotherm conductivity dependence of the ion concentration indicated that these hyperbranched polymers could function as a “solvent” for the lithium salt. The conductivity increased with the increasing concentration of hyperbranched polymers in the host polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 344–350, 2002     

Synthesis of novel moisture‐curable polyurethanes end‐capped with trialkoxysilane and their application to one‐component adhesives

Novel silane endcappers and novel polyurethanes end‐capped with trimethoxysilane (silylated polyurethanes) were developed as water‐curable materials in which the curing reaction occurred under humid conditions in the presence of dioctyltin diversatate as a curing catalyst. A variety of amine‐terminated trimethoxysilane compounds were synthesized by the Michael addition reaction of commercially available 3‐aminopropyltrimethoxysilane with acrylates, and the resulting silane endcappers were used to react with isocyanate‐terminated polyurethanes, providing the silylated polyurethanes. The moisture‐curable silylated polyurethanes were used for the preparation of novel one‐component and solvent‐free adhesives. The evaluated properties were the curing speed, the tensile shear bond strength, and the adherence to some substrates. The longer alkyl chains of the silane endcappers derived from various acrylates led to a slower curing speed, lower tensile strength at break, and longer elongation at break of the silylated polyurethanes. The tensile shear bond strength of the silylated polyurethane‐based adhesive decreased with decreasing the trimethoxysilane end‐capping ratio, whereas an increase in the adherence was observed. The adherence to the acrylic substrate was improved by changes in the main‐chain structure of the polyurethane based on the composition of poly(propylene oxide) and poly(ethylene oxide). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2689–2704, 2007     

Synthesis and characterization of water‐soluble hyperbranched poly(ester amine)s from diacrylates and diamines

Various water‐soluble hyperbranched poly(ester amine)s were synthesized by the direct polyaddition of diamines to diacrylates in the absence of a catalyst. Each diamine contained a secondary amino group and a primary amino group such as 1‐(2‐aminoethyl)piperazine, N‐methyl‐1,3‐propanediamine, or N‐ethylethylenediamine. When the ratio of diacrylate to diamine was 1/1, no gelation was observed throughout the polymerization. When the ratio of diacrylate to diamine was 3/2, no crosslinking occurred in the diluted solution, whereas an insoluble network formed in the concentrated solution. Fourier transform infrared and mass spectrometry were used to investigate the reaction procedure. The secondary amino group of diamine reacted faster with the vinyl group of diacrylate; this resulted in the formation of the intermediate with an acrylate group and two active hydrogen atoms attached to a nitrogen atom. Further self‐polyaddition of the intermediate, a kind of AB₂‐type monomer, gave the hyperbranched poly(ester amine). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2340–2349, 2002     

The thermal polymerization of amino acids revisited; Synthesis and structural characterization of hyperbranched polymers from L‐lysine

This contribution reports on the synthesis of hyperbranched polylysines via thermal polymerization of L ‐lysine hydrochloride. Polymerization of L ‐lysine hydrochloride in the presence of one equivalent KOH at 150 °C resulted in polymers with a number‐average molecular weight of 4600 g/mol and a polydispersity of 2.6 after 48 h. The rate of polymerization could be significantly enhanced and the polymer molecular weight improved by carrying out the polymerization with 3 mol % of an amidation catalyst. Among the different catalysts that were investigated Zr(OⁿBu)₄ was found to be the most effective. Unequivocal support for the branched architecture of the polymers was obtained from ¹H NMR spectroscopy, which allowed the identification and quantification of the four different structural units that constitute the polymer, viz. N^α and N^ε linked linear units, dendritic units and terminal units. The structure of the polymers was found to be relatively independent of the reaction conditions. The degree of branching and the average number of branches varied between 0.35–0.45 and 0.15–0.25, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5494–5508, 2007     

Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008     

Synthesis of networked polymers by copolymerization of monoepoxy‐substituted lithium sulfonylimide and diepoxy‐substituted poly(ethylene glycol), and their properties

Networked polymers that had poly(ethylene glycol) (PEG) chains and lithium sulfonylimide salt structures were prepared by curing a mixture of poly(ethylene glycol) diglycidyl ether and lithium 3‐glycidyloxypropanesulfonyl‐trifluoromethanesulfonylimide with poly(ethylene glycol) bis(3‐aminopropyl) terminated. The obtained flexible self‐standing networked polymer films showed high thermal and mechanical stability with relatively high ionic conductivity. The room temperature ionic conductivity under a dry condition was in the range of 10^?5 ～ 10^?4 S m^?1, which is one order of magnitude higher than the corresponding networked polymers having lithium sulfonate salt structures (10^?6 ～ 10^?5 S m^?1). The film sample became swollen by immersing in propylene carbonate (PC) or PC solution of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). The sample swollen in PC showed higher ionic conductivity (7.2 × 10^?3 S m^?1 at room temperature), and the sample swollen in 1.0 M LiTFSI/PC showed much higher ionic conductivity (8.2 × 10^?1 S m^?1 at room temperature). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of fluorene‐based hyperbranched polymers for solution‐processable blue,green, red,and white light‐emitting devices

For the purpose of making hyperbranched polymer (Hb‐Ps)‐based red, green, blue, and white polymer light‐emitting diodes (PLEDs), three Hb‐Ps Hb‐ terfluorene ( Hb‐TF ), Hb ‐4,7‐bis(9,9′‐dioctylfluoren‐2‐yl)‐2,1,3‐benzothiodiazole ( Hb‐BFBT ), and Hb‐ 4,7‐bis[(9,9′‐dioctylfluoren‐2‐yl)‐thien‐2‐yl]‐2,1,3‐benzothiodiazole ( Hb‐BFTBT ) were synthesized via [2+2+2] polycyclotrimerization of the corresponding diacetylene‐functionalized monomers. All the synthesized polymers showed excellent thermal stability with degradation temperature higher than 355 °C and glass transition temperatures higher than 50 °C. Photoluminance (PL) and electroluminance (EL) spectra of the polymers indicate that Hb‐TF , Hb‐BFBT , and Hb‐BFTBT are blue‐green, green, and red emitting materials. Maximum brightness of the double‐layer devices of Hb‐TF , Hb‐BFBT , and Hb‐BFTBT with the device configuration of indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/light‐emitting polymer/CsF/Al are 48, 42, and 29 cd/m²; the maximum luminance efficiency of the devices are 0.01, 0.02, and 0.01 cd/A. By using host–guest doped system, saturated red electrophosphorescent devices with a maximum luminance efficiency of 1.61 cd/A were obtained when Hb‐TF was used as a host material doped with Os(fptz)₂(PPh₂Me₂)₂ as a guest material. A maximum luminance efficiency of 3.39 cd/A of a red polymer light‐emitting device was also reached when Hb‐BFTBT was used as the guest in the PFO (Poly(9,9‐dioctylfluorene)) host layer. In addition, a series of efficient white devices were, which show low turn‐on voltage (3.5 V) with highest luminance efficiency of 4.98 cd/A, maximum brightness of 1185 cd/m², and the Commission Internationale de l'Eclairage (CIE) coordinates close to ideal white emission (0.33, 0.33), were prepared by using BFBT as auxiliary dopant. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Facile preparation of novel epoxy curing agents and their high‐performance thermosets

Two flame‐retardant epoxy curing agents, 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐yl‐tris(4‐hydroxyphenyl)methane (1) and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐yl‐ (4‐aminophenyl)‐bis(4‐hydroxyphenyl)methane (2), were prepared by a facile, economic, one‐pot procedure. The structures of the curing agents were confirmed by IR, high‐resolution mass, 1‐D, and 2‐D NMR spectra. A reaction mechanism was proposed for the preparation, and the effect of electron withdrawing/donating effects on the stabilization of the carbocation was discussed. (1‐2) served as curing agents for diglycidyl ether of bisphenol A (DGEBA), dicyclopentadiene epoxy (HP‐7200), and cresol novolac epoxy (CNE). Properties such as glass transition temperature, coefficient of thermal expansion, thermal decomposition temperature, and flame retardancy of the resulting epoxy thermosets were evaluated. The resulting epoxy thermosets show high T_g, low thermal expansion, moderate thermostability, and excellent flame retardancy. The bulky biphenylene phosphinate pendant makes polymer chains difficult to rotate, explaining the high T_g and low thermal expansion characteristic. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7898–7912, 2008     

Synthesis and crosslinking behavior of a novel linear polymer bearing 1,2,3‐triazol and benzoxazine groups in the main chain by a step‐growth click‐coupling reaction

The click‐coupling reaction was applied to polycondensation, to synthesize a high‐molecular weight prepolymer having benzoxazine moieties in the main chain. For the polycondensation, a bifunctional N‐propargyl benzoxazine was synthesized from bisphenol A, propargylamine, and formaldehyde. The propargyl group was efficiently used for the copper(I)‐catalyzed alkyne‐azide “click” reaction with p‐xylene‐α,α′‐diazide, to give the corresponding linear polycondensate having 1,2,3‐triazole junctions. The polycondensation proceeded in N,N‐dimethylformamide (DMF) at room temperature. By this highly efficient “click‐” polycondensation reaction, the benzoxazine ring in the monomer was successfully introduced into the polymer main chain without any side reaction. The obtained polymer (=prepolymer) underwent thermal crosslinking to afford the corresponding product, which was insoluble in a wide range of organic solvents and exhibited higher thermal stability than the polymer before crosslinking. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2316–2325, 2008     

Synthesis and properties of new orange red light‐emitting hyperbranched and linear polymers derived from 3,5‐dicyano‐2,4,6‐tristyrylpyridine

Two new orange red light‐emitting hyperbranched and linear polymers, poly(pyridine phenylene)s P1 and P2, were prepared by the Heck coupling reaction. In particular, an A₂ + B₃ approach was developed to synthesize conjugated hyperbranched polymer P2 via one‐pot polycondensation. The polymers were characterized by NMR, Fourier transform infrared, ultraviolet–visible, and elemental analysis. They showed excellent solubility in common solvents such as tetrahydrofuran, CH₂Cl₂, CHCl₃, and N,N‐dimethylformamide and had high molecular weights (up to 6.1 × 10⁵ and 5.8 × 10⁵). Cyclic voltammetry studies revealed that P2 had a low‐lying lowest unoccupied molecular orbital energy level of ?3.22 eV and a highest occupied molecular orbital energy level of ?5.43 eV. The thin film of P2 emitted strong orange‐red photoluminescence at 595 nm. A double‐layer light‐emitting diode fabricated with the configuration of indium tin oxide/P2/tris(8‐hydroxy‐quinoline)aluminum/Al emitted orange‐red light at 599 nm, with a brightness of 662 cd/m² at 7 V and a turn‐on voltage of 4.0 V; its external quantum efficiency was calculated to be 0.19% at 130.61 mA/cm². This indicated that this new electroluminescent polymer (P2) based on 3,5‐dicyano‐2,4,6‐tristyrylpyridine could possibly be used as an orange‐red emitter in polymer light‐emitting displays. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 493–504, 2005     

Acyclic Triene Metathesis Polymerization with Chain‐Stoppers: Molecular Weight Control in the Synthesis of Branched Polymers

The synthesis of branched macromolecules from renewable resources via olefin metathesis is described. We observed that it is possible to control the molecular weight during the acyclic triene metathesis (ATMET) of a triglyceride by the application of methyl acrylate as a chain stopper for this straightforward one step one pot polymerization. The resulting branched materials were characterized by GPC, NMR as well as ESI‐MS and the combination of these techniques provided valuable insights into the polymer structure as well as occurring side reactions during this olefin metathesis polymerization reaction.

     

Synthesis and FET characterization of novel ambipolar and low‐bandgap naphthalene‐diimide‐based semiconducting polymers

A novel series of naphthalene‐diimide‐based semiconducting polymers ( P1–P4 ) containing benzodithiophene or dithienopyrrole were successfully synthesized for ambipolar semiconducting materials showing near infrared absorptions. The incorporation of a 3‐hexylthiophene (3HT) spacer extended the intramolecular charge‐transfer (ICT) peak from λ_onset = 739 nm ( P1 ) to 785 nm ( P3 ). Moreover, about 250 nm red‐shift of the ICT peaks was observed in P2 and P4 compared to P1 and P3 due to the increased high‐lying HOMO energy levels. The grazing incidence X‐ray scattering of the P3 and P4 films proved the slightly improved crystalline order in the π?π stacking direction, indicating that the planar backbone is probably due to the introduced 3HT. The P1–P4 ‐based field‐effect transistor showed n‐type dominant ambipolar characteristics. The P2 and P4 showed higher electron mobilities up to 1.5 × 10^?2 cm² V^?1 s^?1 than P1 and P3 , which might be influenced by the orientation of the polymer backbone and the intermolecular orbital overlap. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 359–367     

Hyperbranch‐polyethyleniminated functional polymers. I. Synthesis,characterization of novel ABA type of dumbbell‐like polyethyleniminated polyoxypropylenediamines,and their complexing properties with copper(II) ions in aqueous solution

Novel ABA‐type dumbbell‐like water‐soluble copolymers [D230(EI)₄, D400(EI)₄, and D400(EI)₈] were synthesized by introducing ethylenimine (EI) groups into both sides of polyoxypropylenediamines via a simple in situ ethylamination of polyoxypropylenediamine with 2‐chloroethylamine hydrochloride. The structures of the resultant polymers were identified by Fourier transform infrared spectroscopy and ¹H NMR. The percentages of primary, secondary, and tertiary amine present were determined by the potentiometric titration method after treatments with the appropriate chemicals of salicylaldehyde and acetic anhydride. The surface tension and solubilizing behavior of pyrene in the presence of these polymers in aqueous medium were also investigated, and the efficiency to reduce the surface tension and solubilizing behavior of pyrene depends on the attachments of EI to polymer backbone. The chelating properties of these polymers were examined quantitatively by ultraviolet–visible (UV–vis) spectroscopy in the presence of Cu²⁺ ions in aqueous solution, and continuous variation analysis revealed that the most stable complex is formed at the normality ratio of [N]/[Cu²⁺] = 3.0. UV–vis spectroscopy and transmission electron microscopy were used to evaluate the dumbbell‐like water‐soluble copolymer, D400(EI)₈, as a stabilizer for preparing colloidal noble metal nanoparticles (Au and Pt) in aqueous solution. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1360–1370, 2003     

Synthesis and characterization of new low band‐gap polymers containing electron‐accepting acenaphtho[1,2‐c]thiophene‐S,S‐dioxide groups

Two donor–acceptor conjugated polymers, PTSSO‐TT and PTSSO‐BDT, composed of acenaphtho[1,2‐c]thiophene ‐ S,S‐dioxide (TSSO) as a new electron acceptor and thienothiophene (TT) or benzo[1,2‐b:4,5‐b']dithiophene (BDT) as electron donors, were synthesized with Stille cross‐coupling reactions. The number‐averaged molecular weights (M_n) of PTSSO‐TT and PTSSO‐BDT were found to be 15100 and 26000 Da, with dispersity of 1.8 and 2.4, respectively. The band‐gap energies of PTSSO‐TT and PTSSO‐BDT are 1.56 and 1.59 eV, respectively. The HOMO levels of PTSSO‐TT and PTSSO‐BDT are ?5.4 and ?5.5 eV, respectively. These results indicate that the inclusion of TSSO accepting units into polymers is a very effective method for lowering their HOMO energy levels. The field‐effect mobilities of PTSSO‐TT and PTSSO‐BDT were determined to be 1.5 × 10^?3 and 4.5 × 10^?4 cm² V^?1 s^?1, respectively. A polymer solar cell device prepared with PTSSO‐TT as the active layer was found to exhibit a power conversion efficiency (PCE) of 3.79% with an open circuit voltage of 0.71 V under AM 1.5 G (100 mW cm^?2) conditions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 498–506     

Development and application of novel ring‐opening polymerizations to functional networked polymers

This Highlight gives an overview of the recent progress in development of new ring‐opening polymerizations (ROPs) and their applications to functional networked polymers in our group. The described ROPs involve thermally induced polymerization of 1,3‐benzoxazine, anionic alternating copolymerizations of epoxides and lactones, and those exhibiting equilibrium nature. These ROPs were successfully applied to the syntheses of the relevant networked polymers, leading to their distinctive features such as high thermal stability, small volume shrinkage, and selective decrosslinking ability, which enabled design and development of next generation materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4847–4858, 2009