Alkylperoxyl spin adducts of pyrroline‐N‐oxide spin traps: Experimental and theoretical CASSCF study of the unimolecular decomposition in organic solvent,potential applications in water

Spin trapping coupled with electron paramagnetic resonance spectroscopy is the most direct method for detection of very low concentrations of free radicals, and it has been intensively used to detect superoxide or alkylperoxyl radicals in biological systems, using cyclic nitrones as spin traps. The half‐life time of the ensuing spin adducts depends dramatically on the spin trap structure; however, their mechanism of decay has never been definitely established. We investigated at the MRMP2/CASSCF (MultiReference second‐order Møller‐Plesset perturbation theory/Complete Active Set Self Consistent Field) level of theory the mechanism of decay of methylperoxyl and tert‐butylperoxyl spin adducts formed with various cyclic nitrones. We showed that no transition state can be located for the O─O homolytic cleavage, which yields an intermediate biradical with the following sequence ^?O─N─C─O^?. Then, homolytic cleavage of the N─C bond yields a nitrosoaldehyde, through an early transition state with a very low activation energy. For each nitrone used as spin trap, electrospray ionization mass spectrometry analysis of the spin trapping mixture allowed to detect the presence of the expected nitrosoaldehyde. We generated tert‐butylperoxyl spin adducts in toluene, and we found a good correlation between their half‐life time and the bond dissociation energy of their peroxidic O─O bond. The theoretical method was then extended to hydroperoxyl spin adducts in water and provided promising results.     

Electrochemical properties and radical anions of carbocycle‐fluorinated quinoxalines and their substituted derivatives

Electrochemical reduction (ECR) and oxidation (ECO) of 5,6,7,8‐tetrafluoroquinoxaline ( 1 ) and its derivatives bearing various substituents R (7‐H ( 2 ), 7,8‐H₂ (3 ), 6‐CF₃ ( 4 ), 6‐Cl ( 5 ), 5,7‐Cl₂ ( 6 ), 5‐NH₂ ( 7 ), 6‐OCH₃ ( 8 ), 6,7‐(OCH₃)₂ ( 9 ), 6,7,8‐(OCH₃)₃ ( 10 ), 5,6,7,8‐(OCH₃)₄ ( 11 ), 6‐OCH₃,7‐N(CH₃)₂ ( 12 ), 6‐N(CH₃)₂ ( 13 ), 6,7‐(N(CH₃)₂)₂ ( 14 ), 5,6,7‐(N(CH₃)₂)₃ ( 15 ), and 7,8‐cyclo‐(=CF‐CF = CF‐CF=) ( 16 )) in the carbocycle have been studied by cyclic voltammetry in MeCN. For 1 – 4 and 7 – 15 , the first reduction peaks have been found to be 1‐electron and reversible, thus corresponding to the formation of their radical anions (RAs), which are long lived at 295 K except those of 4 – 6 and 15 , 16 . Irreversible hydrodechlorination has been observed for 5 and 6 at the first step of their ECR confirmed by EPR detection of corresponding RAs of 2 and 5,7‐H₂ derivative of 1 ( 17 ) at the next steps. Electrochemically generated RAs of 1 – 3 , 7 – 14 , and 17 have been characterized in MeCN by EPR spectroscopy together with DFT calculations at the (U)B3LYP/6‐31 + G(d) level of theory using PCM to describe the solvent. A noticeable alternation of spin density on the –NCCN– moiety of quinoxaline has been observed for all RAs possessing R‐substitution asymmetry. The comparative electron‐accepting ability of 1 – 15 has been analyzed in terms of their experimental reduction peak potentials and the (U)B3LYP/6‐31 + G(d)‐calculated gas‐phase first adiabatic electron affinities (EAs). The differences in electron transfer solvation energies for 1 – 15 have been evaluated on the basis of ECR peaks' potentials and calculated gas‐phase EAs. The ECO of 1 – 5 and 7 – 14 has been found to be irreversible.     

Vibrational spectroscopy and DFT calculations of N,N′‐dicyclohexylcarbodiimide

Infrared (IR) and Raman spectra were obtained for N,N′‐dicyclohexylcarbodiimide (DCC) in the solid state and in CHCl₃ solution. Structures and vibrational spectra of isolated, gas‐phase DCC molecules with C₂ and C_i symmetries, computed at the B3‐LYP/cc‐pVTZ level, show that the IR and Raman spectra provide convincing evidence for a C₂ structure in both the solid state and in CHCl₃ solution. Using a scaled quantum‐chemical force field, these density functional theory calculations have provided detailed assignments of the observed IR and Raman bands in terms of potential energy distributions. Comparison of solid‐state and solution spectra, together with a Raman study of the melting behaviour of DCC, revealed that no solid‐state effects were evident in the spectra. Copyright © 2010 John Wiley & Sons, Ltd.     

X‐ray spectroscopic approaches to the investigation and characterization of photochemical processes

Despite a wealth of studies exemplifying the utility of the 2–5 keV X‐ray range in speciation and electronic structure elucidation, the exploitation of this energy regime for the study of photochemical processes has not been forthcoming. Herein, a new endstation set‐up for in situ photochemical soft X‐ray spectroscopy in the 2–5 keV energy region at the Stanford Synchrotron Radiation Lightsource is described for continuous photolysis under anaerobic conditions at both cryogenic and ambient temperatures. Representative examples of this approach are used to demonstrate the potential information content in several fields of study, including organometallic chemistry, biochemistry and materials chemistry.     

Redox properties and radical anions of fluorinated 2,1,3‐benzothia(selena)diazoles and related compounds

In comparison with 2,1,3‐benzothia(selena)diazoles, electrochemical oxidation and reduction of their 4,5,6,7‐tetrafluoro derivatives and a number of related compounds were studied by cyclic voltammetry. For nine examples of this class, the first reduction peaks are reversible and corresponding radical anions (RAs) are long‐lived at 295 K in MeCN and especially in DMF. The oxidation peaks were irreversible and corresponding radical cations were not observed. Electrochemically generated RAs were characterized by EPR measurements and DFT calculations at the UB3LYP/6‐31+G(d) level. The spin density distribution in the RAs is analyzed in connection with effects of S substitution by Se and/or H by F. The prospects of the studied RAs in the design and synthesis of magnetically active materials are discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Silyloxyamines as sources of silyl radicals: ESR spin‐trapping,laser flash photolysis investigation,and photopolymerization ability

Two silyloxyamines derived from 8‐(pentamethyldisilyloxy)‐julolidine and diethyl 3‐(pentamethyldisilyloxy)‐aniline are proposed as new sources of silyl radicals. The decomposition mechanism, excited state processes and the radical generation are explored by steady state photolysis, laser flash photolysis (LFP), electron spin resonance (ESR), and MO calculations. The Si? Si bond cleavage is clearly demonstrated. The formation of a radical cation on the amine moiety is also observed. Moreover, these compounds work as efficient Type I and Type II photoinitiators (PI) of free radical photopolymerization (FRP). Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis,characterization, and electrochemical studies of new 5‐ and 6‐nitro N‐acyl‐1H‐indazoles

Two series of new N‐1 acylindazoles containing 5‐ or 6‐nitro groups were synthesized with moderate to good yields and characterized by IR and NMR spectroscopy. Cyclic voltammetry in aprotic media was utilized for the electrochemical characterization of the compounds. The calculated reduction potentials in physiological conditions are similar to those of known commercial antichagasic drugs. Therefore, the novel series reported herein are prospective candidates for antichagasic biological evaluation. Theoretical calculation results indicate that the studied dinitro derivatives undergo a single step reduction process because of the energy proximity of their radical and anionic state. Copyright © 2011 John Wiley & Sons, Ltd.     

Electrochemical in situ surface enhanced Raman spectroscopic characterization of a trinuclear ruthenium complex,Ru‐red

To study the fate of a molecular di‐μ‐oxo‐bridged trinuclear ruthenium complex, [(NH₃)₅Ru–O–Ru(NH₃)₄–O–Ru(NH₃)₅]⁶⁺, also known as Ru‐red, during the electro‐driven water oxidation reaction, electrochemical in situ surface enhanced Raman spectroscopy (SERS) investigations have been conducted on an electrochemically roughened gold surface in acidic condition. It was previously described that on a basal plane pyrolitic graphite electrode in 0.1 M H₂SO₄ aqueous solution, Ru‐red undergoes one electron oxidative conversion into a stable higher oxidation state ruthenium complex, Ru‐brown, at <1.0 V (vs normal hydrogen electrode (NHE)), and this leads to water oxidation and dioxygen release, but the fate of Ru‐red during electrochemistry was not studied in much detail. In this investigation, Ru‐red dispersed in acid electrolyte and immobilized on a roughened gold electrode without Ru‐red in solution has been subjected to anodic controlled potential experiments, and in situ SERS was carried out at various potentials in succession. The electrochemical SERS data obtained for Ru‐red are also compared with in situ SERS results of an electrodeposited ruthenium oxide thin film on the Au disk. Our study suggests that on a gold electrode in sulfuric acid solution containing Ru‐red, one electron oxidative conversion of Ru‐red to a higher oxidation state ruthenium compound, Ru‐brown, occurs at ca. 0.74 V (vs NHE), as supported by the electrochemical in situ SERS experiments. Moreover, at higher potentials and on Au disk, the Ru‐red / Ru‐brown are not stable and slowly decompose or electro‐oxidize leading to deactivation of the tri‐ruthenium catalytic system in acidic medium. Copyright © 2013 John Wiley & Sons, Ltd.     

Vibrational characterization of L‐valine phosphonate dipeptides: FT‐IR,FT‐RS,and SERS spectroscopy studies and DFT calculations

Four L ‐valine (L ‐Val) phosphonate dipeptides that are potent inhibitors of zinc metalloproteases, namely, L ‐Val‐C(Me)₂‐PO₃H₂ (V1), L ‐Val‐CH(iP)‐PO₃H₂ (V2), L ‐Val‐CH(iB)‐PO₃H₂ (V3), and L ‐Val‐C(Me)(iP)‐PO₃H₂ (V4), are studied by Fourier‐transform infrared (FT‐IR) spectroscopy, Fourier‐transform Raman spectroscopy (FT‐RS), and surface‐enhanced Raman scattering (SERS). The band assignment (wavenumbers and intensities) is made based on (B3LYP/6‐311 + + G**) calculations. Comparison of theoretical FT‐IR and FT‐RS spectra with those of SERS allows to obtain information on the orientation of these dipeptides as well as specific‐competitive interactions of their functionalities with the silver substrate. More specifically, V1 and V4 appear to interact with the silver substrate mainly via a  C_sgCH₃ moiety localized at the  N_amideC_sg(CH₃)P molecular fragment. In addition, the  POH and isopropyl units of V4 assist in the adsorption process of this molecule. In contrast, the  C_αNH₂ and  PO₃H⁻ groups of V2 and V3 interact with the silver nanoparticles, whereas their isopropyl and isobutyl fragments seem to be repelled by the silver substrate (except for the  CH₂  of V3), similar to the  C_β(CH₃)₂ fragment of L ‐Val for all L ‐Val phosphonate dipeptides investigated in this work. The adsorption mechanism of these molecules onto the colloidal silver surface is also affected by amide bond behavior. Copyright © 2010 John Wiley & Sons, Ltd.     

Electron–phonon coupling and vibrational modes contributing to linear electro‐optic effect of the efficient NLO chromophore 4‐(N,N‐dimethylamino)‐N‐methyl‐4′‐toluene sulfonate (DAST) from their vibrational spectra

The optimized geometry and structural features of the most prospective electro‐optic crystal 4‐(N,N‐dimethylamino)‐N‐methyl‐4′‐toluene sulfonate (DAST), and the vibrational spectral investigations have been comprehensively described with the near infrared Fourier transform (NIR FT) Raman and Fourier transform infrared (FT‐IR) spectra supported by the density functional theoretical (DFT) computations to elucidate the contribution of vibrational modes to the linear electro‐optic (LEO) effect. Mulliken population analysis and natural bond orbital (NBO) analysis have also been carried out to analyze the effects of intramolecular charge transfer (ICT), intramolecular hydrogen bonding and hyperconjugative interactions on the geometries. The influence of CT interaction between the phenyl ring and the dimethylamino group of the nonlinear optical (NLO) chromophore on the endocyclic and exocyclic angles, and the electronic effects such as hyperconjugation and back‐donation on the methyl hydrogen atoms have been examined. The concurrent intense activation of Raman and IR activities of the effective conjugation vibrational coordinate, which significantly contributes to the LEO effect resulting from the strong electron–phonon (e/ph) coupling, has been analyzed in detail. The effects of frontier orbitals, highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), transition of electron density (ED) transfer and the influence of planarity in the stilbazolium ring on the first hyperpolarizability are also discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Structural,electronic and magnetic properties of quaternary half‐metallic Heusler alloy CoFeCrAl

We have investigated the structural, electronic and magnetic properties in quaternary CoFeCrAl Heusler alloy. Rietveld refinement and Mössbauer spectroscopy of samples quenched from 973 K show absence of the A2 phase and presence of a highly ordered B2‐type structure. Full‐potential linearized augmented plane wave calculations using the experimental lattice constant show that there is an energy gap of 0.41 eV around the Fermi level in the bands for minority spin electrons. Partial substitution of Co by Fe in Co₂CrAl thus brings excellent structural ordering while retaining the high Curie temperature, spontaneous magnetization and half‐metallicity necessary for application as spin valves. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis,characterization, and electrochemical properties of imidazole derivatives functionalized single‐walled carbon nanotubes

The imidazole derivatives functionalized single‐walled carbon nanotubes (SWNTs) were synthesized by a diazonium‐based reaction. We have designed and synthesized two imidazole derivatives to modify SWNTs. The resulting products were characterized by Fourier transform infrared (FT‐IR) spectroscopy, Raman spectroscopy, ultraviolet visible (UV/Vis) spectroscopy, thermo gravimetric analysis (TGA), energy dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), and atomic force microscopy (AFM). Electrochemical measurements via a cyclic voltammetry method revealed that the weak intramolecular electronic interactions presented between the attached imidazole derivatives groups and the nanotubes. Copyright © 2008 John Wiley & Sons, Ltd.     

Application of femtosecond‐pulsed lasers for direct optical manipulation of biological functions

Absorption of photon energy by cells or tissue can evoke photothermal, photomechanical, and photochemical effects, depending on the density of the deposited energy. Photochemical effects require a low energy density and can be used for reversible modulation of biological functions. Ultrashort‐pulsed lasers have a high intensity due to the short pulse duration, despite its low average energy. Through nonlinear absorption, these lasers can deliver very high peak energy into the submicrometer focus area without causing collateral damage. Absorbed energy delivered by ultrashort‐pulsed laser irradiation induces free electrons, which can be readily converted to reactive oxygen species (ROS) and related free radicals in the localized region. Free radicals are best known to induce irreversible biological effects via oxidative modification; however, they have also been proposed to modulate biological functions by releasing calcium ions from intracellular organelles. Calcium can evoke variable biological effects in both excitable and nonexcitable cell types. Controlled stimulation by ultrashort laser pulses generate intracellular calcium waves that can modulate many biological functions, such as cardiomyocyte beat rate, muscle contractility, and blood–brain barrier (BBB) permeability. This article presents optical methods that are useful therapeutic and research tools in the biomedical field and discuss the possible mechanisms responsible for biological modulation by ultrashort‐pulsed lasers, especially femtosecond‐pulsed lasers.     

Isolation and characterization of conformational isomers of N,N′‐bis(3,5‐dichlorosalicylidene)‐2,2′‐ethylenedianiline: crystal structure,photoluminescence, and density functional theory calculation

We have isolated two isomeric solids 1 and 2 of N,N′‐bis(3,5‐dichlorosalicylidene)‐2,2′‐ethylenedianiline and characterized by IR, UV/Vis, X‐ray powder diffraction, thermogravimetric analysis/differential thermal analysis, and X‐ray crystallography. Although the solids are same formulas, each shows different colors and crystal structures. Orange solid ( 1 ) shows endo conformation while yellow solid ( 2 ) exhibits exo form depending on packing modes. UV/Vis spectra of 1 and 2 appear very similar patterns in the solid state; however, the bands of 1 are slightly red‐shifted compared with those of 2 . 1 displays a strong fluorescent emission band at ~582 nm while 2 shows an intense fluorescent signal at ~563 nm. The charge density populations of 1 and 2 have been studied by computational simulations using density functional theory at pbe1pbe/6‐311G** level. The calculated highest occupied molecular orbital and lowest unoccupied molecular orbital energies of 1 and 2 confirm that charge transfer occurs within the organic molecules. The energy difference of HOMO‐LUMO in 1 is smaller slightly than that of 2 about 0.05 eV (~17 nm). Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis,UV–Vis and CV properties of a structurally related series of bis(Arylimino)acenaphthenes (Ar‐BIANs)

Herein, we report the synthesis and electrochemical and spectroscopic characterization for a series of six bis(arylimino)acenaphthene, compounds commonly used as ligands in catalysis, polymerization and materials. Low energy absorption bands are the result of an intraligand charge transfer between the aryl groups and the acenaphthene core, and their energies obey a Hammett relationship with respect to substitution on the aryl. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis,structural characterization,and spectroscopic properties of the ortho,meta, and para isomers of 8‐(HOCH2‐C6H4)‐BODIPY and 8‐(MeOC6H4)‐BODIPY

Fluorescent members of the 4, 4‐difluoro‐4‐bora‐3a, 4a‐diaza‐s‐indacene (BODIPY) family are widely used for a range of markers, dyes, and sensors. The capacity to substitute the basic framework is an attractive feature permitting a range of differently substituted materials to be formed. New isomeric BODIPYs, o‐, m‐, and p‐8‐[R‐C₆H₄]‐BODIPY (R = CH₂OH, 2a (o), 2b (m), 2c (p); R = OMe, 3a (o), 3b (m), 3c (p)), have been synthesized and characterized by nuclear magnetic resonance, absorbance and emission spectroscopy, and single crystal X‐ray diffraction. The o‐isomers have a very high quantum yield emission in non‐polar solvents, while the m‐ and p‐ analogs showed weak fluorescence under the same conditions. Spectroscopic analysis, as well as X‐ray structural characterization, suggested that substitution in the ortho‐position of the phenyl ring is sufficient to increase the steric hindrance and hence impede the rotation of the phenyl moiety about the 8C‐C axis, thereby favoring radiative compared to non‐radiative relaxation. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis,spatial structure and spectral properties of pyrylo‐4 (thio) squaraines variously substituted in cyclobutene moiety

Synthetic routes have been developed to a number of (thio) squaraine dyes containing the residues of CH‐acids at the central cyclobutene ring. The electronic and spatial structure as well as the chemical conversions and optical behaviour of the compounds obtained have been studied both theoretically and by X‐ray diffraction analysis, ¹H NMR and electronic spectroscopy. As shown, the electronic nature and sterical characteristics of the central ring substituents give rise to some general conformational features and crystal packing regularities and also govern the spectral position of the first π–π^* absorption band. The structure–property relationships established in the study provide guidance for the purposeful design of deeply coloured (thio) squaraines. Copyright © 2015 John Wiley & Sons, Ltd.