Syntheses of biphenyl‐terminated polyhedral oligomeric octasilicate‐core dendrimers and their single‐component optical transparent free‐standing thermoplastic films

2‐Biphenylethyl and 2‐biphenylhexyl‐terminated polyhedral oligomeric octasilicate (OS)‐core polyester‐typed dendrimers, denoted as OS‐C2‐BP and OS‐C6‐BP, respectively, were prepared by ring‐opening reaction and subsequent condensation of octakis(propenyl succinicanhydrido)polyhedral octasilicate (OS‐SA) with 2‐(4‐phenylphenoxy)ethanol (BP‐C2‐OH) and 6‐(4‐phenylphenoxy)hexanol (BP‐C6‐OH), respectively. OS‐C2‐BP formed a transparent film, whereas OS‐C6‐BP formed an opaque whitish waxy film. The coating film of OS‐C2‐BP was easily peeled off from a substrate and formed a free‐standing film. The results of X‐ray diffraction and differential scanning calorimeter suggest that the film of OS‐C2‐BP was amorphous, whereas OS‐C6‐BP contained crystalline domains. Thermogravimetric analysis of OS‐C2‐BP and OS‐C6‐BP showed 5 wt % weight losses at 362 °C and 283 °C, respectively. OS‐C2‐BP offered higher thermal resistance than OS‐C6‐BP. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1437–1443     

Synthesis of novel dithienothiophene‐ and 2,7‐carbazole‐based conjugated polymers and H‐bonded effects on electrochromic and photovoltaic properties

Three kinds of dithienothiophene/carbazole‐based conjugated polymers ( P1–P3 ), which bear acid‐protected and benzoic acid pendants in P2 and P3 , respectively, were synthesized via Suzuki coupling reaction. Interestingly, P1 – P3 exhibited reversible electrochromism during the oxidation processes of cyclic voltammogram studies, and P3 (with H‐bonds) revealed the best electrochromic property with the most noticeable color change. According to powder X‐ray diffraction (XRD) analysis, these polymers exhibited obvious diffraction features indicating bilayered packings between polymer backbones and π‐π stacking between layers in the solid state. Compared with the XRD data of P2 (without H‐bands), H‐bonds of P3 induced a higher crystallinity in the small‐angle region (corresponding to a higher ordered bilayered packings between polymer backbones), but with a similar crystallinity in the wide angle region indicating a comparable π‐π stacking distance between layers. Moreover, based on the preliminary photovoltaic properties of PSC devices ( P1 – P3 blended individually with PCBM acceptor in the weight ratio of 1:1), P3 (with H‐bonds) possessed the highest power conversion efficiency of 0.61% (with J_sc = 2.26 mA/cm², FF = 29.8%, and V_oc = 0.9 V). In contrast to P2 (without H‐bands), the thermal stability, crystallinity, and electrochromic along with photovoltaic properties of P3 were generally enhanced due to its H‐bonded effects. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Epoxy‐based networks combining chemical and supramolecular hydrogen‐bonding crosslinks

We combine the supramolecular chemistry of heterocyclic ureas with the chemistry of epoxides to synthesize new crosslinked materials incorporating both chemical and supramolecular hydrogen‐bonded links. A two‐step facile and solvent‐free procedure is used to obtain chemically and thermally stable networks from widely available ingredients: epoxy resins and fatty acids. The density of both chemical and physical crosslinks is controlled by the stoichiometry of the reactants and the use of a proper catalyst to limit side reactions. Depending on the stoichiometry, a wide range of thermomechanical properties can be attained. The method can be used to produce elastomeric objects of complex shapes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1133–1141, 2010     

Polymer Micro‐ and Nanocapsules as Biological Carriers with Multifunctional Properties

The design and development of multifunctional polymer capsules with controlled chemical composition and physical properties has been the focus of academic and industrial research in recent years. Especially in the biomedical field, the formulation of novel polymer‐based encapsulation systems for the early‐stage disease diagnostic and effective delivery of bioactive agents represent one of the most rapidly advancing areas of science. The stimuli‐responsive release of cargo molecules from the carrier gains remarkable attention for in vitro and in vivo delivery of contrast agents, genes, and pharmaceutics. In this Review, the current status and the challenges of different polymer‐based micro‐ and nanocapsule formulations are considered, emphasizing on their potential biological application as carriers for specific drug targeting and controlled release upon applying of external stimulus.     

Carbon nanotubes in emulsion‐templated porous polymers: Polymer nanoparticles,sulfonation, and conductivity

Sulfonated polymers are of interest for ion exchange resins, reaction supports, and membranes for separation, filtration, fuel cells, and electrochemical devices. Sulfonic groups have been introduced into polystyrene (PS) through exposure to sulfuric acid, and carbon nanotubes (CNTs) have been added to polymers to enhance proton conductivity without creating an electronic percolation pathway. PolyHIPEs, emulsion‐templated porous polymers with highly interconnected hierarchical open‐cell porous structures, are synthesized through polymerization in the external phases of high internal phase emulsions (HIPEs). In this article, the synthesis of PS‐based CNT‐filled polyHIPEs, their structure, sulfonation, and conductivity are described. Adding CNT dispersions to the HIPEs produced polymer nanoparticle–covered polyHIPEs from polymerization within the water‐soluble surfactant micelles in the internal aqueous phase droplets. The CNTs migrated from the HIPE's aqueous phase droplets into the HIPE's organic phase and formed interconnected bundles within the polyHIPE walls, reflecting a reduction in the surfactant's ability to disperse the CNTs. The water adsorption in the hygroscopic sulfonated polyHIPEs increased the conductivity by several orders of magnitude. The conductivity of the sulfonated polyHIPE containing CNTs was more than an order of magnitude greater than that of the sulfonated polyHIPEs with no CNTs. The CNTs act as “bridges,” enhancing the connection between existing conductive pathways. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4369–4377     

Comparative study of 2‐amino and 3‐aminobenzoic acid copolymerization with aniline synthesis and copolymer properties

Polyanilines soluble in an aqueous basic medium were synthesised by copolymerization of aniline (ANI) with both 2 and 3‐aminobenzoic acids (ABA). Different composition copolymers were prepared by varying the ANI/ABA feed ratio. Poly(aniline‐co‐2‐aminobenzoic acid) (PANI2ABA) and poly(aniline‐co‐3‐aminobenzoic acid) (PANI3ABA) displayed differences in their properties, such as specific charge and fluorescence behavior because the reactivity of 2‐aminobenzoic (2ABA) and 3‐aminobenzoic (3ABA) acids are very different. The new materials were characterized by X‐ray photoelectron, Fourier transform infrared, and Raman spectroscopies. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5587–5599, 2004     

High Tg,ambipolar, and near‐infrared electrochromic anthraquinone‐based aramids with intervalence charge‐transfer behavior

Two novel series of ambipolar and near‐infrared electrochromic aromatic polyamides with electroactive anthraquinone group were synthesized from new aromatic diamines, 2‐(bis(4‐aminophenyl)amino)anthracene‐9,10‐dione and 2‐(4‐(bis(4‐aminophenyl)amino)phenoxy)anthracene‐9,10‐dione, respectively, via low‐temperature solution polycondensation reaction. These polymers were readily soluble in many polar solvents and showed useful levels of thermal stability associated with high glass‐transition temperatures (T_g) (285–360 °C). Electrochemical studies of these electrochromic polyamides revealed ambipolar behavior with reversible redox couples and high contrast ratio both in the visible range and near‐infrared region. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Azide‐functionalized nanoparticles as quantized building block for the design of soft–soft fluorescent polystyrene core—PAMAM shell nanostructures

This work deals with the covalent coupling of azide‐functionalized polymeric nanoparticles as a reactive core and amino‐terminated PAMAM dendrons as a reactive shell. The nanoassemblies thereby obtained could be modified after the dendronization step by grafting an alkynyl Bodipy dye on the unreacted azide moieties. Only a few steps are required to attain nanoassemblies that could mimic dendrimers of high generation with sizes of nano‐objects beyond those of dendrimers. The structure of the nanoassemblies are composed of a polystyrene core, an inner shell including the Bodipy dyes along with the internal branches of the PAMAM, and the terminal amino groups from the outer shell. The dendritic shell acts as a protective layer that prevents NP from aggregation in a surfactant free aqueous solution. The nano‐objects display absorption and emission maxima above 500 nm with brightness that are the same order of magnitude than Qdots. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 115–126     

Patterning Proteins on Surfaces of Cross‐Sectioned Multilayer Polymer Films

Summary: A new approach is introduced to create submicrometer patterned surfaces using multilayer polymer films that contain alternating layers of two polymers, linear low‐density polyethylene (LLDPE) and ethylene‐co‐(acrylic acid) copolymer (EAA). Patterned templates have been prepared by microtoming the multilayer molded sheets. Regionally confined chemical functionality is confirmed by grafting an amine‐terminated biotin and adsorbing streptavidin specifically on the alternating layers of EAA.

Fluorescence micrograph of the Alexa488‐streptadivin patterned polymer surface.     

Synthesis of polymers possessing tetraphenylethylene units by three‐component coupling reactions of poly(p‐phenylene ethynylene) derivative with aryl halides and phenylboronic acid

A derivative of poly(p‐phenylene ethynylene) was subjected to the palladium‐catalyzed three‐component coupling reactions with aryl halides and phenylboronic acid to obtain polymers having tetrasubstituted cis‐vinylene units. For example, 69% of the acetylene units in the prepolymer were converted to cis‐vinylene (i.e., tetrasubstituted cis‐vinylene) units using iodobenzene and phenylboronic acid (5 equiv each with respect to acetylene units). In the UV–vis absorption spectra of the resulting polymers, clear hypsochromic shifts of the absorption maxima were observed, while bathochromic shifts and suppression of the efficiency were observed in their photoluminescence spectra. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 787–791     

Green Polymer Chemistry: II. Enzymatic Synthesis of Methacrylate‐Terminated Polyisobutylenes

Methacrylate‐terminated polyisobutylenes (PIB‐MAs) were synthesized by transesterification of vinyl methacrylate by hydroxyl‐terminated polyisobutylenes (PIB‐OH) using Candida antarctica lipase B (Novozyme 435) catalyst in hexane at 50 °C. PIB CH₂ CH₂ CH₂ OH and Glissopal OH, synthesized by anti‐Markovnikov hydrobromination of allyl‐terminated PIB and Glissopal®2300 followed by hydrolysis, were quantitatively converted into the corresponding PIB‐MAs. ¹H and ¹³C NMR spectroscopy verified the formation of the expected structures. This “green” chemistry is a very promising methodology for polymer functionalization in general, and biomaterial synthesis in particular.

     

Single component transparent free‐standing films based on polyhedral octasilicate‐core dendrimers bearing carbazole terminal groups and their emission properties

9H‐carbazole‐9‐ethyl and 9H‐carbazole‐9‐hexyl‐terminated polyhedral octasilicate (OS)‐core dendrimers, denoted as OS‐C2‐Cz and OS‐C6‐Cz, respectively, were prepared by ring‐opening reaction and subsequent condensation of octakis(propenyl succinicanhydrido)polyhedral octasilicate (OS‐SA) with 9H‐carbazole‐9‐ethanol (Cz‐C2‐OH) and 9H‐carbazole‐9‐hexanol (Cz‐C6‐OH), respectively. Both the dendrimers formed optical transparent coating films. In particular, the coating film of OS‐C2‐Cz was easily peeled off from a substrate and formed a free‐standing film. The results of X‐ray diffraction and differential scanning calorimeter suggest that the films of OS‐C2‐Cz and OS‐C6‐Cz were amorphous. Thermogravimetric analysis of OS‐C2‐Cz and OS‐C6‐Cz showed 10 wt % weight losses at 374 and 383 °C, respectively. Photoluminescence property revealed that the carbazole group in OS‐C2‐Cz is prevented the excimer formation, while the carbazole group in OS‐C6‐Cz formed the excimer. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 628–633     

Self‐Rolled Polymer Tubes: Novel Tools for Microfluidics,Microbiology, and Drug‐Delivery Systems

Recent work on the fabrication of tubular microstructures via self‐rolling of thin, bilayer polymer films is reviewed. A bending moment in the films arises due to the swelling of one component of the bilayer in a selective solvent. The inner diameters of the tubes vary from hundreds of nanometers to dozens of micrometers. The position of the tubes on the substrate and their length can be preset by photolithographic patterning of the bilayer. Prior to rolling, the bilayers can be exposed to different methods of surface functionalization, providing opportunities for engineering the microtube inner surfaces for use in microfluidic circuits and “microbiological” applications. The self‐rolling approach is promising for the development of novel drug‐ and cell‐delivery systems, as well as for tissue engineering.     

Electrochromic enhancement of poly(3,4‐ethylenedioxythiophene) films functionalized with hydroxymethyl and ethylene oxide

2‐((2,3‐Dihydrothieno[3,4‐b]dioxin‐2‐yl)methoxy)methyl oxirane (EDOT‐MO) was successfully synthesized by the reaction of epichlorohydrin with hydroxymethylated‐3,4‐ethylenedioxylthiophene (EDOT‐MeOH), which was synthesized via a simple four‐step sequence. Poly(hydroxymethylated‐3,4‐ethylenedioxylthiophene) (PEDOT‐MeOH) and poly(2‐((2,3‐dihydrothieno[3,4‐b]dioxin‐2‐yl)methoxy)methyl oxirane) (PEDOT‐MO) were electrosynthesized through electropolymerization of EDOT‐MeOH and EDOT‐MO, respectively. Structural, electrochemical, optical, and thermal properties of as‐formed polymers were investigated by FTIR, cyclic voltammetry, UV–vis, and thermogravimetry. Spectroelectrochemistry studies demonstrated that PEDOT‐MeOH and PEDOT‐MO could be reversibly oxidized and reduced accompany with obvious color changes. Further kinetic studies demonstrated that the introduction of hydroxymethyl or ethylene oxide group significantly improved electrochromic properties of 3,4‐ethylenedioxythiophene (PEDOT) and resulted in high contrast ratios (57.3% at 585 nm) and coloration efficiencies (338.5 cm² C^?1), low switching voltages, and fast response time. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1989–1999     

Poly(4‐vinylbenzoyl azide): A New Isocyanato Group Generating Polymer

4‐Vinylbenzoyl azide was synthesized from p‐vinylbenzoic acid and polymerized by free radical polymerization. The obtained polymer contained acyl azide groups which were thermally transformed to the corresponding isocyanato groups. Reactions on these polymers with ethanol, hydroxyethyl methacrylate and 1‐pyrenebutanol proceeded quantitatively. Time‐resolved FT‐IR studies of the reactions with ethanol were carried out by varying the concentration and temperature. The effect of the solvent polarity on the Curtius rearrangement was investigated.

     

Poly(amidoamine)s with 2‐Dithiopyridine Side Substituents as Intermediates to Peptide–Polymer Conjugates

Cystamine, when employed as a cross‐linking agent, leads to poly(amidoamine) networks, which on reaction with 2,2′‐dithiodipyridine turn into linear poly(amidoamine)s with side dithiopyridyl groups that easily undergo exchange reactions with reduced L ‐glutathione, a model thiol‐containing biologically active peptide. The resultant products represent the first examples of soluble poly(amidoamine)–peptide conjugates in which the peptide moieties are linked to the polymer chain by S S bonds stable in blood, but cleavable inside cells.

     

Characterization of parylene‐N and parylene‐C photooxidation

Parylene‐N and parylene‐C are polymers of interest for microelectronic and medical coating applications. Modifications for improved surface properties could make them even more useful in such applications. Parylene‐N and parylene‐C films were exposed to ultraviolet light in the presence of oxygen and analyzed with Rutherford backscattering spectrometry, secondary‐ion mass spectroscopy, X‐ray photoelectron spectroscopy, and infrared spectroscopy. This study shows that such exposure results in the formation of aldehyde and carboxylic acid groups near the surface of the films. At the maximum exposure dose, the concentration of oxygen in both parylene‐N and parylene‐C is about 13% at the film surface, and it decreases exponentially with increasing depth. Further modeling and optimization of this process would allow it to be used to tailor the surface concentration of oxygenated species in parylene for the optimization of adhesion and wettability or for the chemical binding of other moieties. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1486–1496, 2003     

Synthesis,characterization, photo‐induced alignment,and surface orientation of poly(9,9‐dioctylfluorene‐alt‐azobenzene)s

Three types of bi‐functionalized copolymers ( P1FAz , P2FAz , and P3FAz ) with different numbers of fluorene units and an azobenzene unit were synthesized and characterized using UV–vis and polarized absorption spectroanalysis. The trans‐cis photoisomerization was conformed under 400 nm light irradiation for all copolymers in chloroform. However, in the film state, only the trans‐cis photoisomerization occurred by mono‐fluorene attached copolymer poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐4,4′‐azobenzene)] ( P1FAz ). Photo‐induced alignment was achieved using the P1FAz film after irradiation with linear polarized 400 nm light and subsequent annealing at 60 °C. Surface orientation of a spin‐coating film of poly(9,9‐didodecylfluorene) ( F12 ) was achieved using the photo‐induced alignment layer of the P1FAz film after annealing at 90 °C. The photo‐induced alignment layer of P1FAz has potential application to the surface orientation technique for appropriate polymers, which will be useful for the fabrication of optoelectronics devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

New hyperbranched second‐order nonlinear optical poly(arylene‐ethynylene)s containing pentafluoroaromatic rings as isolation group: Facile synthesis and enhanced optical nonlinearity through Ar‐ArF self‐assembly effect

In this article, a facile route was designed to prepare four new hyperbranched poly(arylene‐ethynylene)s containing azo‐chromophore moieties through one‐pot “A₂+B₃” approach via simple Sonogashira coupling reaction. The polymers were all soluble in organic solvents and demonstrated good nonlinear optical (NLO) properties, because of the three‐dimensional spatial isolation effect of these hyperbranched polymers. Due to the different B₃‐type comonomer, the self‐assembly effect of pentafluoroaromatic in the interior of these polymers were different, leading to the different trends of the NLO activities. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012