Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Polymerization of 1,3‐dienes with functional groups. II. Free‐radical polymerization of N‐(2‐methylene‐3‐butenoyl)piperidine

The free‐radical homopolymerization and copolymerization behavior of N‐(2‐methylene‐3‐butenoyl)piperidine was investigated. When the monomer was heated in bulk at 60 °C for 25 h without an initiator, about 30% of the monomer was consumed by the thermal polymerization and the Diels–Alder reaction. No such side reaction was observed when the polymerization was carried out in a benzene solution with 1 mol % 2,2′‐azobisisobutylonitrile (AIBN) as an initiator. The polymerization rate equation was found to be R_p ∝ [AIBN]^0.507[M]^1.04, and the overall activation energy of polymerization was calculated to be 89.5 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure that included both 1,4‐E and 1,4‐Z configurations. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were carried out in benzene solutions at 60 °C with AIBN as an initiator. In the copolymerization with styrene, the monomer reactivity ratios were r₁ = 6.10 and r₂ = 0.03, and the Q and e values were calculated to be 10.8 and 0.45, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1545–1552, 2003     

Styrene/1,3‐butadiene copolymerization by C2‐symmetric group 4 metallocenes based catalysts

C₂‐symmetric group 4 metallocenes based catalysts (rac‐[CH₂(3‐tert‐butyl‐1‐indenyl)₂]ZrCl₂ (1) , rac‐[CH₂(1‐indenyl)₂]ZrCl₂ (2) and rac‐[CH₂(3‐tert‐butyl‐1‐indenyl)₂]TiCl₂ (3) ) are able to copolymerize styrene and 1,3‐butadiene, to give products with high molecular weight. In agreement with symmetry properties of metallocene precatalysts, styrene homosequences are in isotactic arrangements. Full determination of microstructure of copolymers was obtained by ¹³C NMR and FTIR analysis and it reveals that insertion of butadiene on styrene chain‐end happens prevailingly with 1,4‐trans configuration. In the butadiene homosequences, using zirconocene‐based catalysts, the 1,4‐trans arrangement is favored over 1,4‐cis, but the latter is prevailing in the presence of titanocene (3) . Diad composition analysis of the copolymers makes possible to estimate the reactivity ratios of copolymerization: zirconocenes (1) and (2) produced copolymers having r₁ × r₂ = 0.5 and 3.0, respectively (where 1 refers to styrene and 2 to butadiene); while titanocene (3) gave tendencially blocky styrene–butadiene copolymers (r₁ × r₂ = 8.5). The copolymers do not exhibit crystallinity, even when they contain a high molar fraction of styrene. Probably, comonomer homosequences are too short to crystallize (n_s = 16, in the copolymer at highest styrene molar fraction). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1476–1487, 2008     

Estimation of Reactivity Ratios in the Copolymerization of Styrene and VeoVa‐10

The styrene and vinyl neodecanoate copolymerization system shows a strong tendency to form two separate homopolymers. In order to improve the feeding strategies and hence the copolymer uniformity, it is necessary to know the reactivity ratios between these monomers. The error‐in‐variables‐method (EVM) is the most recommended mathematical procedure for estimating these parameters. Experiments on free‐radical copolymerization in solution in sealed ampoules are carried out to provide data for the conversion (via gravimetry) and fractional monomer compositions (via Fourier transform mid‐infrared (mid‐FT‐IR) spectroscopy). These data allow estimation of the reactivity ratios. EVM appropriately takes into account the experimental errors in the data and allows determination of the reactivity ratio values by the Mayo–Lewis model (r₁ = 28.60 and r₂ = 1.23). The convergence and robustness of the method decrease considerably with a larger discrepancy between the reactivity values.     

Benedict's solution/ vitamin C: An alternative catalytic protocol for the synthesis of regioselective‐1,4‐disubstituted‐1H‐1,2,3‐triazoles at room temperature

A novel and highly efficient method for the synthesis of 1,4‐disubstituted‐1H‐1,2,3‐triazoles by copper‐catalyzed azide‐alkyne cycloaddition has been developed. This economic and sustainable protocol uses a readily available Benedict's solution/Vitamin C catalyst system affording a wide range of 1,4‐disubstituted‐1H‐1,2,3‐triazoles under mild conditions.     

A Novel ‘Domino‐Click Approach’ to Unsymmetrical Bis‐1H‐1,2,3‐triazoles

Aryl azides 1 were treated with allenylmagnesium bromide ( 2 ) to generate 1,5‐disubstituted butynyl‐1H‐1,2,3‐triazoles 3 in a domino fashion, which upon Cu^I‐catalyzed 1,3‐dipolar cycloaddition with aryl azides 4 afforded novel bis‐1H‐1,2,3‐triazoles 5 in quantitative yields (Scheme 1 and Table).     

Initiator effect on the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline and 2‐phenyl‐2‐oxazoline

The aim of this research was to study the effect of the initiator on the resulting monomer distribution for the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline (EtOx) and 2‐phenyl‐2‐oxazoline (PhOx). At first, kinetic studies were performed for the homopolymerizations of both monomers at 160 °C under microwave irradiation using four initiators. These initiators have the same benzyl‐initiating group but different leaving groups, Cl^?, Br^?, I^?, and OTs^?. The basicity of the leaving group affects the ratio of covalent and cationic propagating species and, thus, the polymerization rate. The observed differences in polymerization rates could be correlated to the concentration of cationic species in the polymerization mixture as determined by ¹H NMR spectroscopy. In a next‐step, polymerization kinetics were determined for the copolymerizations of EtOx and PhOx with these four initiators. The reactivity ratios for these copolymerizations were calculated from the polymerization rates obtained for the copolymerizations. This approach allows more accurate determination of the copolymerization parameters compared to conventional methods using the composition of single polymers. When benzyl chloride (BCl) was used as an initiator, no copolymers could be obtained because its reactivity is too low for the polymerization of PhOx. With decreasing basicity of the used counterions (Br^? > I^? > OTs^?), the reactivity ratios gradually changed from r_EtOx = 10.1 and r_PhOx = 0.30 to r_EtOx = 7.9 and r_PhOx = 0.18. However, the large difference in reactivity ratios will lead to the formation of quasi‐diblock copolymers in all cases. In conclusion, the used initiator does influence the monomer distribution in the copolymers, but for the investigated system the differences were so small that no difference in the resulting polymer properties is expected. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4804–4816, 2008     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

Quantifying and Controlling the Composition and ‘Randomness’ Distributions of Random Copolymers

The effect of disparity in the reactivity ratios of monomer pairs on the composition distribution and microstructure of the resultant copolymer formed through free‐radical polymerization is quantified computationally. This correlation has been determined for the monomer pairs of styrene/methyl methacrylate and styrene/2‐vinyl pyridine for a variety of monomer feed ratios. These monomer pairs were chosen as they represent systems that have been utilized to experimentally examine the importance of copolymer architecture on its ability to compatibilize an immiscible polymer blend. Moreover, their respective random copolymers show conflicting results for this examination. The results of this work show that the difference in the reactivity ratios of styrene and 2‐vinyl pyridine copolymer (r₁ = 0.5, r₂ = 1.3) significantly broadens the composition and randomness distribution of the resultant copolymer. This breadth is not easily avoided as it evolves even in the early stages of the copolymerization. Conversely, for the styrene/methyl methacrylate pair, the reactivity ratios are similar (r₁ = 0.46, r₂ = 0.52) and this results in a copolymer with a narrow composition distribution and sequence distribution dispersion. Stopping the polymerization at early conversion further narrows both distributions. The presented results, therefore, provide fundamental information that must be considered when planning an experimental procedure to evaluate the relative importance of sequence distribution and composition distribution of a random on its application.     

One‐Pot Synthesis of 4‐Aryl‐NH‐1,2,3‐Triazoles through Three‐Component Reaction of Aldehydes,Nitroalkanes and NaN3

A one‐pot three‐component reaction of aldehydes, nitroalkanes and NaN₃ for the synthesis of NH ‐1,2,3‐triazoles has been developed. The reaction provides a safe, efficient and step‐economic approach for the synthesis of various NH ‐1,2,3‐triazoles in good to excellent yields.     

Metal‐Free CN‐ and NN‐Bond Formation: Synthesis of 1,2,3‐Triazoles from Ketones,N‐Tosylhydrazines,and Amines in One Pot

A novel synthetic approach toward 1,4‐disubstituted 1,2,3‐triazoles by C?N‐ and N?N‐bond formation has been established under transition‐metal‐free conditions. Complete control of the regioselectivity was successfully achieved. Commercially available anilines, ketones, and N‐tosylhydrazine were treated with molecular iodine in one pot to allow the regioselective generation of 1,4‐disubstituted 1,2,3‐triazoles in high yields without the use of azides.     

Homo‐ and copolymerization of norbornene with styrene catalyzed by a series of copper(II) complexes in the presence of methylaluminoxane

Vinyl‐type polymerization of norbornene as well as random copolymerization of norbornene with styrene was studied using a series of copper complexes‐MAO. The precatalysts used here are copper complexes with β‐ketoamine ligands based on pyrazolone derivatives and the molecular structure of complex 4 was determined using X‐ray analysis. All of these catalyst systems are moderately active for the vinyl‐type polymerization of norbornene and random copolymerization of norbornene with styrene. The random copolymers obtained suggest that only one type of active species is present. Gel permeation chromatography (GPC) and NMR indicate that the copolymers are ‘true’ copolymers. The copolymerization reactivity ratios (r_NBE = 20.11 and r_Sty = 0.035) indicate a much higher reactivity of norbornene, which suggests a coordination polymerization mechanism. The solubility and processability of the copolymers are improved relative to polynorbornene and the thermostability of the copolymers is improved relative to polystyrene. Copyright © 2006 John Wiley & Sons, Ltd.     

Application of the monomer reactivity ratios to the kinetic‐model discrimination and the solvent‐effect determination for the styrene/acrylonitrile monomer system

The impact of reactivity ratios determined with the Nelder and Mead simplex method on the kinetic‐model discrimination and the solvent‐effect determination for the styrene/acrylonitrile monomer system was investigated. For the monomer system, the penultimate unit effect was inversely proportional to the polarity of the solvent: acetonitrile < N,N‐dimethylformamide < methyl ethyl ketone < toluene. Quantitatively, the penultimate unit effect could be correlated with an absolute value of the difference between the standard deviation of the reactivity ratios determined for the terminal and penultimate models. By application of the F test, the penultimate model was justified for copolymerization in toluene. The conclusion was less certain for polymerization in methyl ethyl ketone. With a scanning procedure based on the simplex method, it was found that an equivalent representation of the copolymer‐composition data could be achieved with multiple sets of penultimate‐model reactivity ratios. However, the relationship between the triad‐sequence distribution and copolymer composition depended on the reactivity‐ratio set chosen for the microstructure determination. The microstructure calculated with the penultimate‐model reactivity ratios determined with the simplex method from the initial guess (r₁₁ = r₁, r₂₁ = 1/r₂, r₂₂ = r₂, r₁₂ = 1/r₁) did not obey the general “bootstrap effect” rule. This observation still requires some theoretical interpretation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 846–854, 2000     

Efficient Synthesis of 1,2,3‐Triazoles by Copper‐Mediated CN and NN Bond Formation Starting From N‐Tosylhydrazones and Amines

An effective copper‐mediated synthesis of 1,5‐dialkyl‐4‐aryl‐1,2,3‐triazoles and 1,4‐dialkyl‐5‐aryl‐1,2,3‐triazoles has been achieved by the use of different N‐tosylhydrazones and alkyl amines. The scope of the substrates could be extended from anilines to aliphatic amines when 30 mol % amino acid is added into the reaction mixture. This methodology exhibits many notable features, such as broad substrates scope, high efficiency, and good regioselectivity. Preliminary mechanistic studies indicated that the reaction probably proceeded through a 1‐tosyl‐2‐vinyldiazene intermediate and subsequent aza‐Michael addition and N?N bond formation process.     

Cobalt(III)‐complex‐mediated terpolymerization of CO2, styrene oxide,and epoxides with an electron‐donating group

Terpolymerizations of CO₂, styrene oxide (SO), and epoxides with an electron‐donating group such as propylene oxide (PO) or cyclohexene oxide (CHO) were carried out by using Co(III)–salen complexes in the presence of an intra‐ or intermolecular nucleophilic cocatalyst. The resultant terpolymers have only one thermolysis peak and one glass transition temperature (T_g), which can be easily adjusted by controlling the proportion of styrene carbonate linkages. During the CO₂/SO/PO terpolymerization, the monomer reactivity ratios (r_SO = 0.18 and r_PO = 2.25) evaluated by Fineman–Ross plot indicates a random distribution of the two kinds of carbonate units in the resultant polymer. Contrarily, the monomer reactivity ratios were found to be r_SO = 0.48 and r_CHO = 0.79 in the CO₂/SO/CHO terpolymerization, indicating that an alternating nature of the two different carbonate units predominantly exists in the resultant polycarbonate. The regioselective ring opening of SO has a significant effect on the reactivities of both SO and CHO during the terpolymerization with CO₂. The matched reactivity is contributed to the enhanced regioselective ring opening of SO, caused by the attack of the dissociating polymer carboxylate anion, bearing a cyclohexene carbonate end unit. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

1,3‐Dipolar Cycloaddition Reactions of Organic Azides with Morpholinobuta‐1,3‐dienes and with an α‐Ethynyl‐enamine

The cycloaddition of organic azides with some conjugated enamines of the 2‐amino‐1,3‐diene, 1‐amino‐1,3‐diene, and 2‐aminobut‐1‐en‐3‐yne type is investigated. The 2‐morpholinobuta‐1,3‐diene 1 undergoes regioselective [3+2] cycloaddition with several electrophilic azides RN₃ 2 ( a , R=4‐nitrophenyl; b , R=ethoxycarbonyl; c , R=tosyl; d , R=phenyl) to form 5‐alkenyl‐4,5‐dihydro‐5‐morpholino‐1H‐1,2,3‐triazoles 3 which are transformed into 1,5‐disubstituted 1H‐triazoles 4a , d or α,β‐unsaturated carboximidamide 5 (Scheme 1). The cycloaddition reaction of 4‐[(1E,3Z)‐3‐morpholino‐4‐phenylbuta‐1,3‐dienyl]morpholine ( 7 ) with azide 2a occurs at the less‐substituted enamine function and yields the 4‐(1‐morpholino‐2‐phenylethenyl)‐1H‐1,2,3‐triazole 8 (Scheme 2). The 1,3‐dipolar cycloaddition reaction of azides 2a – d with 4‐(1‐methylene‐3‐phenylprop‐2‐ynyl)morpholine ( 9 ) is accelerated at high pressure (ca. 7–10 kbar) and gives 1,5‐disubstituted dihydro‐1H‐triazoles 10a , b and 1‐phenyl‐5‐(phenylethynyl)‐1H‐1,2,3‐triazole ( 11d ) in significantly improved yields (Schemes 3 and 4). The formation of 11d is also facilitated in the presence of an equimolar quantity of tBuOH. The three‐component reaction between enamine 9 , phenyl azide, and phenol affords the 5‐(2‐phenoxy‐2‐phenylethenyl)‐1H‐1,2,3‐triazole 14d .     

Synthesis and copolymerization of fluorinated monomers bearing a reactive lateral group. XX. Copolymerization of vinylidene fluoride with 4‐bromo‐1,1,2‐trifluorobut‐1‐ene

The radical copolymerization of vinylidene fluoride (VDF) with 4‐bromo‐1,1,2‐trifluorobut‐1‐ene (C₄Br) was examined. This bromofluorinated alkene was synthesized in three steps, which started with the addition of bromine to chlorotrifluoroethylene. In contrast to the ethylenation of 1,1‐difluoro‐1,2‐dibromochlorethane, which failed, that of 2‐chloro‐1,1,2‐trifluoro‐1,2‐dibromoethane was optimized and led to 2‐chloro‐1,1,2‐trifluoro‐1,4‐dibromobutane. The kinetics of the copolymerization of VDF with this brominated monomer initiated by t‐butyl peroxypivalate led to an assessment of the reactivity ratios, r_VDF = 0.96 ± 0.67 and r_C4Br = 0.09 ± 0.63, at 50 °C. The suspension copolymerization was also carried out, and the chemical modifications of the resulting bromo‐containing poly(vinylidene fluoride)s were attempted and consisted mainly of elimination or nucleophilic substitution of the bromine. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 917–935, 2005     

Novel Hyperbranched Poly([1,2,3]‐triazole)s Derived from AB2 Monomers by a 1,3‐Dipolar Cycloaddition

Summary: Novel hyperbranched poly([1,2,3]‐triazole)s were synthesized from several AB₂ monomers by a 1,3‐dipolar cycloaddition reaction. The compound 3,5‐bis(propargyloxy)benzyl azide was polymerized thermally at room temperature leading to 1,4‐ and 1,5‐disubstituted poly([1,2,3]‐triazole) and catalytically leading only to the 1,4‐disubstituted poly([1,2,3]‐triazole). Only the thermal reaction led to fully soluble products. The AB₂ monomers containing an internal alkyne A unit could be autopolymerized thermally under mild reaction conditions leading to soluble, high‐molecular‐weight hyperbranched poly([1,2,3] triazole)s. All products were characterized by detailed NMR investigations.

Synthesis route for polymers 8a and 8b .     

Bulk Free‐Radical Co‐ and Terpolymerization of n‐Butyl Acrylate/2‐Ethylhexyl Acrylate/Methyl Methacrylate

n‐Butyl acrylate (BA), 2‐ethylhexyl acrylate (EHA), and methyl methacrylate (MMA) are commonly used monomers in pressure‐sensitive adhesive formulations. The bulk free‐radical copolymerizations of BA/EHA, MMA/EHA, and BA/MMA are studied at 60 °C to demonstrate the use of copolymer reactivity ratios for the prediction of BA/MMA/EHA terpolymer composition. The reactivity ratios for BA/EHA and MMA/EHA copolymer systems are determined using low conversion experiments; BA/MMA reactivity ratios are already known from the literature. The reactivity ratio estimates for the BA/EHA system are r _BA = 0.994 and r _EHA = 1.621 and the estimates for MMA/EHA are r _MMA = 1.496 and r _EHA = 0.315. High conversion experiments are conducted to validate the reactivity ratios. The copolymer reactivity ratios are shown to predict terpolymer composition of high conversion BA/MMA/EHA experiments.