A comparative study of single-walled carbon nanotube purification techniques using Raman spectroscopy

Raman spectroscopy has been utilized to show the increase of single-walled carbon nanotubes (SWCNTs) content in commercial grade samples synthesized by the chemical vapour deposition (CVD) technique with a minimization of impurities using both hydrochloric acid treatment and surfactant purification. Surfactant purification methods proved to be the most effective, resulting in a three-fold increase in the percentage of SWCNTs present in the purified product as determined by Raman spectroscopy.     

Synthesis,characterization, and electrical properties of polypyrrole/multiwalled carbon nanotube composites

Size‐controllable polypyrrole (PPy)/multiwalled carbon nanotube (MWCNT) composites have been synthesized by in situ chemical oxidation polymerization directed by various concentrations of cationic surfactant cetyltrimethylammonium bromide (CTAB). Raman spectra, FTIR, SEM, and TEM were used to characterize their structure and morphology. These results showed that the composites are core (MWCNT)–shell (PPy) tubular structures with the thickness of the PPy layer in the range of 20–40 nm, depending on the concentration of CTAB. Raman and FTIR spectra of the composites are almost identical to those of PPy alone. The electrical conductivities of these composites are 1–2 orders of magnitude higher than those of PPy without MWCNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6449–6457, 2006     

Chemical catalytic vapor deposition (CCVD) synthesis of carbon nanotubes by decomposition of ethylene on metal (Ni, Co, Fe) nanoparticles

A simple method for producing unsupported nickel catalyst that can be used to synthesize multi-wall carbon nanotubes (MWNT) has been developed. The yield of purified MWNTs is about 1.8 g_mwnt/(g_cat×h).     

Improved interfacial properties of PI composites through graphene oxide and carbon nanotubes on carbon fiber surface

Carbon nanotubes (CNTs) have been identified as excellent nanoreinforcements for carbon fiber (CF)–reinforced polymers regarding a wide range of engineering applications. The outstanding properties of CNTs, such as their large surface area, high mechanical strength, and low manufacturing cost bring them to be distinguished nanoreinforcements for carbon fiber–reinforced polymers to form multifunctional and multiscale composites. Electrophoretic deposition of graphene oxide for CNTs onto the CF surface was conducted. The presence of graphene oxide–CNTs may effectively increase both the roughness and wettability of the CF surface, resulting in an improvement to the interfacial bonding strength between the CF and the polyimide (PI).     

Effect of the AACVD based synthesis atmosphere on the structural properties of multi-walled carbon nanotubes

The synthesis of multi-walled carbon nanotubes (MWCNT_S) has been the focus of considerable research effort for more than twenty-five years and it continues to receive increasing attention because of its importance to produce carbon nanotubes with suitable parameters for future applications. To the best of our knowledge this study presents for the first time the complex studies concerning the effect of aerosol-assisted chemical vapour deposition (AACVD) process conditions (including temperature (750–1200 °C) and the composition of the carrier gas (N₂, Ar, He, 5% H₂-95% Ar, 3% H₂O-97% Ar)) on the conversion of the carbon source and on the properties of the carbon nanotubes. In addition, it was also found that oxidative or reductive atmosphere applied during the AACVD process have a great impact on the quality and the degree of toluene conversion into the carbon solids obtained during the synthesis. X-ray Diffraction (XRD), Specific Surface Area and Porosity analysis (BET), Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS), Transmission Electron Microscopy (TEM), Raman spectroscopy and Thermo-gravimetric Analysis (TG) were used to characterize the carbon nanotubes.     

Heteroatom‐containing ferrocene derivatives as catalysts for MWCNTs and other shaped carbon nanomaterials

The effects of heteroatom‐containing ferrocene catalysts on the materials produced from chemical vapour deposition (CVD) floating catalyst synthesis were investigated. Specifically, the influence of nitrogen‐ and oxygen‐containing ferrocenoyl imidazolide and (N‐phenylcarbamoyl)ferrocene, and sulfur‐ and oxygen‐containing S,S‐bis(ferrocenylmethyl)dithiocarbonate on the structural morphology and distribution of the products as well as properties such as the thermal stability and crystallinity were studied. In addition, the influence of reaction parameters such as catalyst concentration and temperature were also investigated. The nitrogen‐containing catalysts produced N‐doped multi‐walled carbon nanotubes (N‐MWCNTs), whereas the sulfur‐containing catalyst produced primarily nano‐ and microspheres. A concentration of 2.5 wt% ferrocenoyl imidazolide was shown to be optimal for the synthesis of MWCNTs at 850 °C, with very low metal iron residue, highest thermal stability and highest yield (95%). In general, bamboo compartment length for N‐doped MWCNTs increased with temperature. Crystallinity trends were shown to be independent of catalyst and catalyst concentration in all cases and only dependent on temperature. The average diameter for MWCNTs was shown to be dependent on temperature, choice of catalyst and catalyst concentration in all cases. Copyright © 2012 John Wiley & Sons, Ltd.     

The production of carbon nanotubes from carbon dioxide: challenges and opportunities

Recent advances in the production of carbon nanotubes (CNTs) are reviewed with an emphasis on the use of carbon dioxide (CO2) as a sole source of carbon. Compared to the most widely used carbon precursors such as graphite, methane, acetylene, ethanol, ethylene, and coal-derived hydrocarbons, CO2 is competitively cheaper with relatively high carbon yield content. However, CNT synthesis from CO2 is a newly emerging technology, and hence it needs to be explored further. A theoretical and analytical comparison of the currently existing CNT-CO2 synthesis techniques is given including a review of some of the process parameters (i.e., temperature, pressure, catalyst, etc.) that affect the CO2 reduction rate. Such analysis indicates that there is still a fundamental need to further explore the following aspects so as to realize the full potential of CO2 based CNT technology: (1) the CNT-CO2 synthesis and formation mechanism, (2) catalytic effects of transitional metals and mechanisms, (3) utilization of metallocenes in the CNT-CO2 reactions, (4) applicability of ferrite-organometallic compounds in the CNT-CO2 synthesis reactions, and (5) the effects of process parameters such as temperature, etc.     

Carbon nanotubes for supercapacitors:Consideration of cost and chemical vapor deposition techniques

In this topic,we first discussed the requirement and performance of supercapacitors using carbon nanotubes(CNTs) as the electrode,including specific surface area,purity and cost.Then we reviewed the preparation technique of single walled CNTs(SWNTs) in relatively large scale by chemical vapor deposition method.Its catalysis on the decomposition of methane and other carbon source,the reactor type and the process control strategies were discussed.Special focus was concentrated on how to increase the yield,selectivity,and purity of SWNTs and how to inhibit the formation of impurities,including amorphous carbon,multiwalled CNTs and the carbon encapsulated metal particles,since these impurities seriously influenced the performance of SWNTs in supercapacitors.Wish it be helpful to further decrease its product cost and for the commercial use in supercapacitors.     

Silver nanoparticle‐decorated multiwalled carbon nanotube/pramipexole nanocomposite: Synthesis,characterization and application as an antibacterial agent

This work reports the preparation of multiwalled carbon nanotube/pramipexole/Ag (CNT/pra/Ag) as a novel antibacterial agent, in which pramipexole groups are utilized as linkers to secure Ag nanoparticles to carbon nanotube surfaces without agglomeration. The resulting CNT/pra/Ag sample was characterized by performing transmission and scanning electron microscopy, wavelength‐ and energy‐dispersive X‐ray, X‐ray diffraction, Fourier transform infrared, inductively coupled plasma and Raman measurements. Using this approach, monodisperse spherical Ag nanoparticles in CNT/pra/Ag have narrow size distributions with average diameters of ca 3–8 nm. The antibacterial activity of CNT/pra/Ag was investigated against bacterial species Staphylococcus aureus , methicillin‐resistant S. aureus , Pseudomonas aeruginosa and Escherichia coli using the paper‐disc diffusion method and by determining the minimal inhibitory concentration. CNT/pra/Ag showed better inhibitory activity towards Gram‐positive bacteria than Gram‐negative bacteria in this study, which indicates its potential as an antibacterial material for laboratory and medical purposes.     

Carbon nanotube detectors for microchip CE: comparative study of single-wall and multiwall carbon nanotube, and graphite powder films on glassy carbon, gold, and platinum electrode surfaces

The performance of microchip electrophoresis/electrochemistry system with carbon nanotube (CNT) film electrodes was studied. Electrocatalytic activities of different carbon materials (single-wall CNT (SWCNT), multiwall CNT (MWCNT), carbon powder) cast on different electrode substrates (glassy carbon (GC), gold, and platinum) were compared in a microfluidic setup and their performance as microchip electrochemical detectors was assessed. An MWCNT film on a GC electrode shows electrocatalytic effect toward oxidation of dopamine (E(1/2) shift of 0.09 V) and catechol (E(1/2) shift of 0.19 V) when compared to a bare GC electrode, while other CNT/carbon powder films on the GC electrode display negligible effects. Modification of a gold electrode by graphite powder results in a strong electrocatalytic effect toward oxidation of dopamine and catechol (E(1/2) shift of 0.14 and 0.11 V, respectively). A significant shift of the half-wave potentials to lower values also provide the MWCNT film (E(1/2) shift of 0.08 and 0.08 V for dopamine and catechol, respectively) and the SWCNT film (E(1/2) shift of 0.10 V for catechol) when compared to a bare gold electrode. A microfluidic device with a CNT film-modified detection electrode displays greatly improved separation resolution (R(s)) by a factor of two compared to a bare electrode, reflecting the electrocatalytic activity of CNT.     

The use of organometallic transition metal complexes in the synthesis of shaped carbon nanomaterials

A review of the use of organometallic complexes in the synthesis of shaped carbon nanomaterials (SCNMs), in particular carbon nanotubes (CNTs) has been undertaken. This review reveals that a limited number of organometallic complexes have been used as catalysts (typically ferrocene, Fe(CO)₅) to make carbon materials that have distinctive shapes. Depending on the reaction conditions employed, ferrocene can be used to synthesize single walled (SWCNTs), double walled (DWCNTs) and multiwalled nanotubes (MWCNTs) as well as fibres and other SCNMs. The type of reactor used as well as the reaction conditions (temperature, pressure, gas flow rates, etc.) and the presence of hydrogen and heteroatoms (N, O, S, P, etc.) also play a role in determining the final carbon types (and their sizes) that have been synthesized. The influence of the various chemical and physical factors on the carbons produced are discussed. The current mechanism used to explain the formation of CNTs is described.     

Preparation and characterization of nematic polyazomethine/single‐walled carbon nanotube composites prepared by in situ polymerization

The synthesis and characterization of a series of nematic SWNT‐polyazomethine composites are described. The composites were prepared by in situ polymerization in the presence of 1 wt % of chemically modified SWNTs in such a way that they were either dispersed or covalently bonded to the polymeric matrix. The presence of the SWNTs did not alter the thermal behavior of the polymer matrix and, therefore, highly oriented fibers could be melt‐extruded from the composites at moderate temperatures, as revealed by structural and morphological studies. Preliminary tests on tensile properties indicate that strength and stiffness were improved when compared with fibers without CNTs, particularly when SWNTs were covalently bonded to the polymeric matrix. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2361–2372, 2009     

Production of single-walled carbon nanotubes from methane over Co-Mo/MgO nanocatalyst:A comparative study of fixed and fluidized bed reactors

In this study,the performances of fixed and fluidized bed reactors in the production of single-walled carbon nanotubes(SWNTs)have been investigated.In both reactors,single-walled carbon nanotubes were grown by catalytic chemical vapor decomposition(CCVD)of methane over Co-Mo/MgO nanocatalyst under two different operating conditions.The synthesized samples were characterized by TEM,TGA and Raman spectroscopy.It is found that the performance of a fluidized bed in the synthesis of carbon nanotubes is much better than that of a fixed bed.The quality of carbon nanotubes obtained from the fluidized bed was significantly higher than that from the fixed bed and the former one with the ID/IG ratio of 0.11 while the latter one with the ID/IG ratio of 0.71.Also,the yield of SWNTs in the fluidized bed was 92 wt%,while it was 78 wt%in the fixed bed.These advantages of fluidized bed reactors for the synthesis of carbon nanotubes can be attributed to more available space for the growth of carbon nanotubes and more uniform temperature and concentration profiles.     

Filled and empty states of carbon nanotubes in water: Dependence on nanotube diameter, wall thickness and dispersion interactions

We have carried out a series of molecular dynamics simulations of water containing a narrow carbon nanotube as a solute to investigate the filling and emptying of the nanotube and also the modifications of the density and hydrogen bond distributions of water inside and also in the vicinity of the outer surfaces of the nanotube. Our primary goal is to look at the effects of varying nanotube diameter, wall thickness and also solute-solvent interactions on the solvent structure in the confined region also near the outer surfaces of the solute. The thickness of the walls is varied by considering single and multi-walled nanotubes and the interaction potential is varied by tuning the attractive strength of the 12–6 pair interaction potential between a carbon atom of the nanotubes and a water molecule. The calculations are done for many different values of the tuning parameter ranging from fully Lennard-Jones to pure repulsive pair interactions. It is found that both the solvation characteristics and hydrogen bond distributions can depend rather strongly on the strength of the attractive part of the solute-water interaction potential. The thickness of the nanotube wall, however, is found to have only minor effects on the density profiles, hydrogen bond network and the wetting characteristics. This indicates that the long range electrostatic interactions between water molecules inside and on the outer side of the nanotube do not make any significant contribution to the overall solvation structure of these hydrophobic solutes. The solvation characteristics are primarily determined by the balance between the loss of energy due to hydrogen bond network disruption, cavity repulsion potential and offset of the same by attractive component of the solute-water interactions. Our studies with different system sizes show that the essential features of wetting and dewetting characteristics of narrow nanotubes for different diameter and interaction potentials are also present in relatively smaller systems consisting of about five hundred molecules. We dedicate this work to Professor Debashis Mukherjee on his 60th Birthday.     

Covalent immobilization of single-walled carbon nanotubes and single-stranded deoxyribonucleic acid nanocomposites on glassy carbon electrode: Preparation, characterization, and applications

Single-stranded deoxyribonucleic acid (ssDNA)-wrapped single-walled carbon nanotubes (SWNTs) were modified on the surface of glassy carbon electrode (GCE) by covalent modification technique. Field emission scanning electron microscope (FE-SEM), X-ray photoelectron spectrum (XPS), electrochemical impedance spectroscopy (EIS), and cyclic voltammetric (CV) were used to characterize the properties of this modified electrode. The results showed that SWNTs-ssDNA composites were successfully immobilized onto the surface of GCE. Moreover, this modified electrode exhibited high stability, largely active areas, and efficiently electrocatalytic activities. It had been used for the analysis of various biomolecules, such as dopamine (DA), uric acid (UA), and ascorbic acid (AA), and the results were satisfactory.     

Multilayer graphene/amorphous carbon hybrid films prepared by microwave surface‐wave plasma CVD: synthesis and characterization

Hybrid films of multilayer graphene (MG) containing amorphous carbon (a‐C) were synthesized on Al substrates by microwave surface‐wave plasma chemical vapor deposition. Raman scattering and surface transmission electron microscopy showed that the carbon films contained a large quantity of MG when a radio frequency (RF) substrate bias was not applied. Amorphization of graphene in the carbon film was promoted by applying an RF bias, which generated Ar⁺ in the plasma. The bandgaps of the films were found to increase as the Raman intensity ratios between the 2D‐band (at 2700 cm^?1) and D‐band (at 1350 cm^?1) decreased, indicating the formation of a‐C. The MG/a‐C all‐sp² phase of carbon hybrid films exhibited an increase in current density under 5 mW/cm² of AM1.5G solar simulated irradiation as the RF bias increased because of Ar⁺‐induced amorphization of the graphene. Copyright © 2016 John Wiley & Sons, Ltd.     

One step NaBH4 reduction of Pt-Ru-Ni catalysts on different types of carbon supports for direct ethanol fuel cells: Synthesis and characterization

The ternary catalyst Pt₇₅Ru₅Ni₂₀ was conducted on various types of carbon supports including functionalized Vulcan XC-72R (f-CB), functionalized multi-walled carbon nanotubes (f-MWCNT), and mesoporous carbon (PC-Zn-succinic) by sodium borohydride chemical reduction method to improve the ethanol electrooxidation reaction (EOR) for direct ethanol fuel cell (DEFC). It was found that the particle size of the metals on f-MWCNT was 5.20 nm with good particle dispersion. The alloy formation of ternary catalyst was confirmed by XRD and more clearly described by SEM element mapping, which was relevant to the efficiency of the catalysts. Moreover, the mechanism of ethanol electrooxidation reaction based on the surface reaction was more understanding. The activity and stability for ethanol electrooxidation reaction (EOR) were investigated using cyclic voltammetry and chronoamperometry, respectively. The highest activity and stability for EOR were observed from Pt₇₅Ru₅Ni₂₀/f-MWCNT due to a good metal-carbon interaction. Ru and Ni presented in Pt-Ru-Ni alloy improved the activity and stability of ternary catalysts for EOR. Moreover, the reduction of Pt content in ternary catalyst led to the catalyst cost deduction in DEFC.     

Analytical application of carbon nanotubes,fullerenes and nanodiamonds in nanomaterials-based chromatographic stationary phases: A review

An overview of the most significative results so far attained in the application of carbon nanotubes, fullerenes and nanodiamonds as chromatographic separation media is presented. In particular, the authors focus on their use in capillary and packed-column gas chromatography, in high performance liquid chromatography and capillary electrochromatography, paying also attention to recently developed stationary phases for fast chromatography and nanochromatography. The performance of the nanomaterials is compared to that of planar and amorphous carbon sorbents and critically discussed in regard to retentive capability and selectivity. A wide part of this review is devoted to the most recent improvements achieved in terms of selectivity by use of functionalized nanotubes and by combination of carbon nanotubes with ionic liquids. Practical aspects of synthetic procedures in preparing novel stationary phases in relationship with their chromatographic behaviour are also commented.     

Noncovalent functionalization of multiwalled and double‐walled carbon nanotubes: Positive effect of the filler functionalization on high glass transition temperature epoxy resins

Double‐walled carbon nanotubes (DWCNTs) and multiwalled carbon nanotubes (MWCNTs) were modified using melamine to attach ? NH₂ to the surface of these fillers, without previous oxidation of their graphene layers. FT‐Raman, elemental (chemical) and thermogravimetric analysis, confirmed the modification, which was more extensive for DWCNTs. The potential of this modification was evaluated by adding the melamin‐modified nanotubes to thermosets based on diglycidyl ether of bisphenol A (resin) and polycyclic amine (hardener). Broadening of the glass transition interval and an increase between 7 and 8 °C of the glass transition temperatures show better filler/matrix interaction for the nanocomposites based on melamine‐modified nanotubes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1860–1868, 2009