Completely Subradiant Multi‐Atom Architectures Through 2D Photonic Crystals

Following recent advances in the manipulation of atoms trapped near 1D waveguides and proposals to use surface acoustic waves on piezoelectric substrates for the same purpose, the potential of two‐dimensional platforms is shown. Directional emission of atoms near photonic crystal slabs with square symmetry is used, in the ideal case, to build perfect subradiant states of 2 distant atoms, possible in 2D only for finite lattices with perfectly reflecting boundaries. These allow the design of massively parallel 1D arrays of atoms above a single crystal, useful for multi‐port output of nonclassical light, by exploiting destructive interference of guided resonance modes. Directionality of the emission is shown to be present whenever a linear iso‐frequency manifold is present in the dispersion relation of the crystal. Multi‐atom radiance properties can be predicted from a simple cross‐talk coefficient of a master equation, in good agreement with exact atom‐crystal dynamics, showing its predictive power. Departing from the ideal theoretical case, possible experimental issues in photonic crystal implementations are also discussed, and an outlook of other relevant modern platforms for 2D propagation of excitations is given.     

Light Trapping and Down‐Shifting Effect of Periodically Nanopatterned Si‐Quantum‐Dot‐Based Structures for Enhanced Photovoltaic Properties

Periodically nanopatterned Si structures have been prepared by using a nanosphere lithography technique. The formed nanopatterned structures exhibit good anti‐reflection and enhanced optical absorption characteristics. The mean surface reflectance weighted by AM1.5 solar spectrum (300–1200 nm) is as low as 5%. By depositing Si quantum dot/SiO₂ multilayers (MLs) on the nanopatterned Si substrate, the optical absorption is higher than 90%, which is significantly improved compared with the same multilayers deposited on flat Si substrate. Furthermore, the prototype n‐Si/Si quantum dot/SiO₂ MLs/p‐Si heterojunction solar cells has been fabricated, and it is found that the external quantum efficiency is obviously enhanced for nanopatterned cell in a wide spectral range compared with the flat cell. The corresponding short‐circuit current density is increased from 25.5 mA cm^?2 for flat cell to 29.0 mA cm^?2 for nano‐patterned one. The improvement of cell performance can be attributed both to the reduced light loss and the down‐shifting effect of Si quantum dots/SiO₂ MLs by forming periodically nanopatterned structures.     

太阳能电池陷光结构辐射特性研究

本文分析了不同微结构、电池厚度对太阳能电池光损失的影响,提出了一种新的电池陷光结构。运用时域有限差分法(FDTD)仿真了该类太阳能电池陷光结构中光传输过程,获得了不同波源入射下陷光结构电池的储能特性和光捕获特性,优化设计了最佳陷光结构并分析了其光捕获性能。     

p‐Type Dye‐Sensitized Solar Cells with a CdSeS Quantum‐Dot‐Sensitized NiO Photocathode for Outstanding Short‐Circuit Current

CdSeS quantum dots (QDs) are firstly introduced into a NiO photocathode for photocathodic dye‐sensitized solar cells (p‐DSCs). The optimized sample exhibits a short‐circuit density (14.68 mA cm^?2) and power conversion efficiency (1.02%) that are almost one order of magnitude higher than the reported value of p‐QDSCs. Steady‐state photoluminescence and time‐resolved photoluminescence measurements indicate that the photoexcited holes can be almost completely injected from CdSeS QDs into the valence band of NiO. At the same time, it can be observed from electrochemical impedance spectra measurements.     

纳米压印制备的光子晶体结构对AlGaN基材料深紫外出光效率的提高

通过利用阳极氧化铝的方法制备高度有序的光子晶体结构作为纳米压印模板,将大面积光子晶体图案转移到了样品表面,解决了国际上小尺寸光子晶体制备困难的问题。采用纳米压印的方法在AlGaN基样品表面上制备了290 nm的周期光子晶体结构,并将表面具有光子晶体结构的AlGaN基样品正面出光强度提高121%。偏振特性的实验结果表明六角排列的孔状光子晶体将原来朝向样品侧面传播的TE偏振光偏折转向正面,从而增加光抽取效率,改变出光偏振度。指出远场角分辨图案的变化归因于光子晶体对出光的衍射和Bragg散射效果。实验中采用的创新性工艺可以用来制备具有高出光效率的深紫外发光二极管。     

基于谐振腔效应的近紫外垂直结构LED光萃取效率优化

利用有限时域差分法研究近紫外垂直结构LED的光萃取效率的影响因素。结果显示,LED的光萃取效率随p-GaN层厚度的变化呈周期性振荡变化,在极大值点处的光萃取效率是极小值点处的4.8倍。进一步地,对上述振荡极大值点和极小值点的n-GaN层厚度和表面光子晶体结构进行优化,优化的光萃取效率分别达到35.3%和24.7%,比优化前各提高了37.9%和280%。因此,合理的外延层和光子晶体结构可有效提高近紫外垂直结构LED的光萃取效率,这对实验制备高效近紫外垂直结构LED芯片具有一定的指导作用。     

用时域有限差分法研究二维光子晶体传输特性

将时域有限差分方法用于光子晶体传输特性理论研究，分别计算了二维方型光子晶体TM模和TE模的透射率频率分布；根据光子晶体的标度不变性特征，在微波频段制作了光子晶体，并设计了实验装置；实验结果与计算结果一致表明：对于一定的入射方向，某些频率的光不能在光子晶体中传播。     

Self‐Collimation in Photonic Crystals: Applications and Opportunities

A comprehensive review considering recent advances in self‐collimation and its applications in optical integration is covered in the current article. Self‐collimation is compared to the conventional technique of photonic bandgap engineering to control the light propagation in photonic crystal‐based structures. It is fully discussed how the self‐collimation phenomenon can be tailored to be independent of the incident angle and polarization. This adds substantial flexibility to the structure to overcome light coupling challenges and simultaneously aids in the omission of bulk and challenging elements, including polarizers and lenses from optical integrated circuits. Additionally, designed structures have the potential to be rescaled to operate in any desired frequency range thanks to the scalability rule in the field of electromagnetics. Moreover, it is shown that one can boost the coupling efficiency by applying an anti‐reflection property to the structure, which provides not only efficient index matching but also the matching between external waves with uniform amplitude and Bloch waves with periodic amplitude.     

Ab Initio Simulation of Charge Transfer at the Semiconductor Quantum Dot/TiO2 Interface in Quantum Dot‐Sensitized Solar Cells

Quantum dot‐sensitized solar cells (QDSSCs) have emerged as a promising solar architecture for next‐generation solar cells. The QDSSCs exhibit a remarkably fast electron transfer from the quantum dot (QD) donor to the TiO₂ acceptor with size quantization properties of QDs that allows for the modulation of band energies to control photoresponse and photoconversion efficiency of solar cells. To understand the mechanisms that underpin this rapid charge transfer, the electronic properties of CdSe and PbSe QDs with different sizes on the TiO₂ substrate are simulated using a rigorous ab initio density functional method. This method capitalizes on localized orbital basis set, which is computationally less intensive. Quite intriguingly, a remarkable set of electron bridging states between QDs and TiO₂ occurring via the strong bonding between the conduction bands of QDs and TiO₂ is revealed. Such bridging states account for the fast adiabatic charge transfer from the QD donor to the TiO₂ acceptor, and may be a general feature for strongly coupled donor/acceptor systems. All the QDs/TiO₂ systems exhibit type II band alignments, with conduction band offsets that increase with the decrease in QD size. This facilitates the charge transfer from QDs donors to TiO₂ acceptors and explains the dependence of the increased charge transfer rate with the decreased QD size.     

用于短波段发光二极管的二维光子晶体禁带研究

运用平面波展开法(PWE),针对光子晶体在短波长段发光二极管(LED)领域上的应用,主要选择高频禁带模式,研究了4种具有较大应用潜力的二维光子晶体结构,包括正方空气柱结构、三角空气柱结构、正方介质柱结构和三角介质柱结构。在不同晶格常数、占空比(AFF)、柱半径和晶格常数比下,分析了TE模式和TM模式光子禁带的变化。数据分析表明,光子禁带中心波长随AFF增加而变小。相比于其他结构,正方介质柱结构更适于短波段光子晶体LED来提高其出光效率,三角介质柱结构和三角空气柱结构适合用于构造短波段偏振光LED。     

Comb of high‐Q Resonances in a Compact Photonic Cavity

The optical equivalent of the quantum mechanical oscillator is demonstrated in a photonic crystal cavity, owing to the balance of the background dispersion and a bichromatic potential. Consequently, several equi‐spaced resonances with large loaded Q factors are obtained within a very tiny volume. A detailed statistical analysis is carried out by exploiting the complex reflection spectra measured with Optical Coherent Tomography. The log‐normal distribution of the intrinsic Q‐factors is centered at 0.7 million. The device is made of Ga_0.5In_0.5P in order to suppress the two photon absorption in the Telecom spectral range considered here. This is crucial to turn the strong localization of light into ultra‐efficient parametric interactions.     

Spectral tuning of InGaAs/GaAs quantum dot infrared photodetectors with bandpass guided‐mode resonance filters

Quantum dot infrared photodetectors can be coupled with micro‐structured filters to create narrowband sensors. Guided‐mode resonance filters based on a high‐index dielectric slab can exhibit bandpass characteristics that are suitable for monolithic integration with focal‐plane arrays. Here, patterned Ge filters were integrated with InGaAs/GaAs quantum dot detectors to linearly tune their 77 K photoresponse peaks from 5.6 µm to 6.2 µm. The dark current was not influenced by these filters but the ability to narrow the photoresponse linewidth was limited by substrate scattering, which is often encountered with front‐side illumination architectures. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

用转移矩阵法数值研究二维正方介质柱光子晶体的传输特性

利用转移矩阵方法对二维正方介质柱光子晶体的传输特性进行了研究,数值计算研究了不同晶格、同一晶格柱体截面面积不同、放置方位角不同时光子晶体的传输特性。数值结果表明光子禁带的宽度与中心频率和晶格结构有很大关系,正方晶格更易形成平坦光子禁带,柱体截面面积大,则形成的禁带较宽,在其他因素相同的条件下柱体放置的方位角对光子禁带有重要影响。数值研究表明在正方介质柱下设计宽平坦光子禁带时,可以首先考虑正方晶格结构,其次设法使柱体截面尽量大一些,最后可通过柱体放置方位角来微调光子禁带的宽度与中心频率以达到设计要求。     

Tunable and High Photoluminescence Quantum Yield from Self‐Decorated TiO2 Quantum Dots on Fluorine Doped Mesoporous TiO2 Flowers by Rapid Thermal Annealing

Herein a novel approach is reported to achieve tunable and high photoluminescence (PL) quantum yield (QY) from the self‐grown spherical TiO₂ quantum dots (QDs) on fluorine doped TiO₂ (F‐TiO₂) flowers, mesoporous in nature, synthesized by a simple solvothermal process. The strong PL emission from F‐TiO₂ QDs centered at ≈485 nm is associated with shallow and deep traps, and a record high PL QY of ≈5.76% is measured at room temperature. Size distribution and doping of F‐TiO₂ nanocrystals (NCs) are successfully tuned by simply varying the HF concentration during synthesis. During the post‐growth rapid thermal annealing (RTA) under vacuum, the arbitrary shaped F‐TiO₂ NCs transform into spherical QDs with smaller sizes and it shows dramatic enhancement (≈163 times) in the PL intensity. Electron spin resonance (ESR) and X‐ray photoelectron spectroscopy (XPS) confirm the high density of oxygen vacancy defects on the surface of TiO₂ NCs. Confocal fluorescence microscopy imaging shows bright whitish emission from the F‐TiO₂ QDs. Low temperature and time resolved PL studies reveal that the ultrafast radiative recombination in the TiO₂ QDs results in highly efficient PL emission. A highly stable, biologically inert, and highly fluorescent TiO₂ QDs/flowers without any capping agent demonstrated here is significant for emerging applications in bioimaging, energy, and environmental cleaning.     

Light manipulation in organic light‐emitting devices by integrating micro/nano patterns

The demonstration of high efficiency and color tunability has brought organic light‐emitting devices (OLEDs) into the lighting and display market. High efficiency is one of the key issues for their commercial applications, for which much effort has been devoted to developing novel materials and device structures. It is well known that around 80% of the generated photons are trapped in OLED structure, so that there is still the greatest scope for significant improvements in its efficiency. This has driven the research towards the integration of micro/nano patterns into device structures that benefit from their abilities in manipulating the generation and propagation of photons. Micro/nano patterns with random or periodic morphologies have demonstrated their effect on the outcoupling of the trapped photons within the device. Moreover, the emitting properties other than the light extraction could be manipulated by introducing the micro/nano patterns. This article reviews the recent progresses in improving the light extraction and manipulating the emission properties of the OLEDs through the introduction of the micro/nano patterns by various fabrication strategies. The light manipulation of the micro/nano patterns in organic photovoltaics is briefly discussed considering its similar working principle and fabrication strategies to that of the OLEDs.

     

利用CdTe量子点增敏鲁米诺-过氧化氢化学发光体系测定水环境中的对苯二酚

在碱性条件下,CdTe量子点对鲁米诺-过氧化氢化学发光体系具有显著的增敏作用,而对苯二酚对该体系的化学发光有强烈的抑制作用,以此建立了流动注射化学发光检测对苯二酚的新方法。在优化实验条件下,在1.0～25 nmol·L-1范围内对苯二酚的浓度与化学发光强度的抑制值ΔI呈良好的线性关系(R2=0.993 2),检出限为0.76 nmol·L-1,经实际应用证明,该方法可用于水环境中对苯二酚的测定。此外,对CdTe量子点增敏鲁米诺-过氧化氢化学发光体系的机理进行了探讨。