Conductivity studies of polymer electrolytes based on aliphatic polyesters

A series of aliphatic polyesters of sebacoyl chloride and poly(ethylene glycol) containing a different number of ethylene oxide groups was synthesized and characterized. These polyesters were complexed with lithium perchlorate to obtain a new class of polymer electrolyte. The relationships between the structure and properties of these polymer electrolytes were investigated. The main factor that affects the ionic conductivity in these systems was found to be the solvating capacity of the polyester for the lithium salt. These polymer electrolytes showed ionic conductivities up to 10^?5 ? 10^?4 S/cm at 25°C. The mechanical strength was improved by cross-linking, and the cross-linked polyester complexed with a LiCIO₄ salt showed an ionic conductivity of 2 × 10^?5 S/cm at room temperature. ⁷Li NMR spin-spin relaxation and dielectric relaxation studies were also carried out to investigate the local environments and dynamics of ions in the polymer electrolytes. © 1995 John Wiley & Sons, Inc.     

Poly(methyl acrylate)/poly(hydroxyethyl acrylate) sequential interpenetrating polymer networks. Miscibility and water sorption behavior

Sequential poly(methyl acrylate)/poly(hydroxyethyl acrylate) interpenetrating polymer networks with different poly(hydroxyethyl acrylate) contents were prepared by free radical polymerization of hydroxyethyl acrylate inside the previously polymerized poly(methyl acrylate) network. Differential scanning calorimetry on dry samples shows that the interpenetrating polymer networks exhibit phase separation, and no differences are found between the glass transition temperatures of the two phases present in the interpenetrating polymer network and those of the pure components. Thermally stimulated depolarization current experiments were used to study the influence of water sorption on the mobility of the different molecular groups in the poly(hydroxyethyl acrylate) phase of the interpenetrating polymer network. Isothermal water sorption of the interpenetrating polymer networks and pure poly(methyl acrylate) and poly(hydroxyethyl acrylate) networks is analyzed with different theories to compare the behavior of the poly(hydroxyethyl acrylate) phase in the interpenetrating polymer networks with that of the pure poly(hydroxyethyl acrylate) network. Diffusion coefficients of water in the interpenetrating polymer networks are obtained by means of dynamic sorption experiments. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1587–1599, 1999     

Preparation of hydrogel from green polymer

A new method was used for the production of hydrogels from green polymer with a higher swelling ratio. These hydrogels were synthesized first by graft copolymerization between acrylamide (AM) and poly(vinyl alcohol) (PVA) with alkaline or kraft lignin (AM‐PVA‐g‐lignin) and then by mixing with acrylamide monomer. The kraft and alkaline lignins were isolated from pulping liquor and characterized using UV and FT‐IR spectroscopy, and the formed hydrogels were characterized using FT‐IR spectroscopy and scanning electron microscopy (SEM). Compared with kraft lignin hydrogel, the alkaline lignin hydrogel had very high swelling ratios and slower water uptake and deswelling rates attributed to its compatible network structure. The hydrogels formed were used also to study the influence of sodium chloride on the absorption capacity at room temperature and swelling ratios at different temperatures. Copyright © 2004 John Wiley & Sons, Ltd.     

Water effects in polyurethane block copolymers

Equilibrium and dynamic sorption isotherm measurements, differential scanning calorimetry (DSC) measurements, and, mainly, dielectric relaxation spectroscopy (DRS) measurements by means of the thermally stimulated depolarization currents (TSDC) method were used to investigate the hydration properties of linear segmented polyurethane copolymers. Three types of samples were investigated with various fractions of hard and soft block segments. They were based on polyethylene adipate (PEA), 4,4′-diphenylmethane diisocyanate (MDI) and 1,4-butanediol (BDO). At 20°C the water content h of the samples at various values of relative humidity rh increases in proportion to the weight fraction of soft block segments phase. At saturation (rh = 100%) the ratio of sorbed water molecules to polar carbonyl polyester groups is 0.13. At saturation at 20°C there is no fraction of freezable water. The glass transition temperature, T_g, measured by DSC and by TSDC, shifts to lower temperature with increasing h by about 8–10 K at saturation at 20°C. A dielectric relaxation mechanism related to interfacial polarization in the phase-separated morphology is also plasticized by water in a way similar to that observed for the main (α) relaxation. © 1996 John Wiley & Sons, Inc.     

Atomic level picture of stress relaxation in polymer melts

We have been developing a physical picture on the atomic level of stress relaxation in polymer melts by means of computer simulation of the process in model systems. In this article we treat a melt of freely jointed chains, each with N = 200 bonds and with excluded-volume interactions between all nonbonded atoms, that has been subjected to an initial constant-volume uniaxial extension. We consider both the stress relaxation history σ(t) based on atomic interactions, and the stress history σ_e(t; N_R) based on subdividing the chain into segments with N_R bonds each, with each segment regarded as an entropic spring. It is found that at early times σ(t) > σ_e(t; N_R) for all N_R, and that, for the remainder of the simulation, there is no value of N_R for which σ(t) = σ_e(t; N_R) for an extended period; by the end of the simulation σ(t) has fallen just below the value σ_e(t; 50). The decay of segment orientation, 〈P₂(t; N_R)〉, and of bond orientation 〈P₂(t; 1)〉, is computed during the simulation. It is found that the decay of the atom-based stress σ(t) is closely related to that of 〈P₂(t; 1)〉. This result may be understood through the concept of steric shielding. The change in local structure of the polymer melt during relaxation is also studied. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 143–154, 1998     

Water sorption characteristics of poly(2‐hydroxyethyl acrylate)/silica nanocomposite hydrogels

Water sorption in hydrogels based on nanocomposites of poly(2‐hydroxyethyl acrylate) (PHEA) and silica, prepared by simultaneous polymerization and sol‐gel process, were studied gravimetrically over wide ranges of silica content, both below and above the percolation threshold of about 15% wt for the formation of a continuous inorganic network interpenetrated with the organic network. Measurements were performed at room temperature from the vapor phase, both at equilibrium and dynamic, for selected values of water activity α_w between 0 and 0.95, and from the liquid phase. In the nanocomposite hydrogels, the overall water uptake from the vapor phase is practically the same as in pure PHEA below the percolation threshold, whereas it is reduced above the percolation threshold, in particular at high α_w values where swelling becomes significant. Water clustering sets in at around 14 vol % (10 wt %) of water independently of composition, whereas the mean value of water molecules in a cluster decreases at high silica contents. In immersion experiments water uptake decreases as silica content increases to the percolation threshold of about 15 wt % and is then almost independent of composition. A scheme is proposed, which explains these results in terms of the existence of micelles, where a number of hydrophilic hydroxy groups are linked together, and their disentaglement by immersion into water. Diffusion coefficients of water depend on water content and are reduced on addition of silica above the percolation threshold. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Depolarization thermocurrent studies in poly(hydroxyethyl acrylate)/water hydrogels

Detailed investigations on the dielectric relaxation mechanisms in poly(hydroxyethyl acrylate) (PHEA), by means of the thermally stimulated depolarization currents (TSDC) method in the temperature range 77-300 K are reported. There is particular interest in the dependence of the dielectric relaxation mechanisms on the water content h, h = 0 ? 0.5 w/w, in an attempt to contribute to a better understanding of the physical structure of water in the PHEA hydrogels. We employ thermal sampling (TS) and partial heating (PH) techniques to experimentally analyze the observed complex relaxation processes, due to the secondary (β_sw) and the main (α) relaxation, into approximately single responses and to determine the spectra of activation energies E(T) at different h values. Measurements with different electrode configurations reveal different aspects of the dynamics of the relaxation mechanisms and allow the distinction between dipolar and conductivity relaxation contributions. It is shown that by means of these techniques we can determine certain temperature characteristics for the α relaxation and investigate their dependence on water content. We discuss the relation of these characteristic temperatures to the calorimetric glass transition temperature T_g. © 1994 John Wiley & Sons, Inc.     

Fabrication of poly(acrylamide) hydrogels with gradient crosslinking degree via photoinitiation of thick polymer system

In this paper, we report on the synthesis of poly(acrylamide) (PAM) hydrogels by photoinitiation with a thick system. The hydrogels exhibited gradient crosslinking density along the light path. Thermogravimetric analyses (TGA) proved the same effects. We investigated some factors affecting the swelling ratio of the hydrogels such as crosslinking agent concentration, photoinitiator concentration, and monomer concentration. The as‐prepared hydrogels might have some potential applications in drug delivery systems and other function materials. Copyright © 2009 John Wiley & Sons, Ltd.     

Noncovalent binding interactions of polyacrylamide and clay in nanocomposite hydrogels

The interactions between organic and inorganic components in pregel solution for polyacrylamide (PAAm)/clay nanocomposite hydrogels (NC gels) and in prepared NC gels are investigated. Besides, a kind of self‐crosslinked PAAm gels with excellent mechanical properties is fabricated in the absence of any cross‐linking agents, the hydrogen bonding interactions among PAAm chains are acted as the cross‐linking force. It is revealed that the binding interactions of PAAm and clay in NC gels are owing to the noncovalent interactions between amide groups on PAAm chains and clay platelets, which afford the cross‐linking force for NC gels network formation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Multiscale modeling of viscoelastic properties of polymer nanocomposites

A methodology for simple multiscale modeling of mechanical properties of polymer nanocomposites has been developed. This methodology consists of three steps: (1) obtaining from molecular dynamics simulations the viscoelastic properties of the bulklike polymer and approximating the position-dependent shear modulus of the interfacial polymer on the basis of the polymer-bead mean-square displacements as a function of the distance from the nanoparticle surface, (2) using bulk- and interfacial-polymer properties obtained from molecular dynamics simulations and performing stress–relaxation simulations of the nanocomposites with material-point-method simulations to extract the nanocomposite viscoelastic properties, and (3) performing direct validation of the average composite viscoelastic properties obtained from material-point-method simulations with those obtained from the molecular dynamics simulations of the nanocomposites. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1005-1013, 2005     

Electric field sensitivity of conducting hydrogels with interpenetrating polymer network structure

In this article, we reported the synthesis, structure and electric field sensitivity of polyacrylate/polyaniline (PAA/PANI) and poly(2-acrylamido-2-methyl propylsulfonic acid-acrylic acid)/polyaniline [P(AMPS-AA)/PANI] conducting hydrogels with an interpenetrating polymer network (IPN) structure. Scanning electron microscope showed that the conducting hydrogels presented porous structures consisting of PANI nanofibers. The results of Fourier-transform infrared and X-ray diffraction revealed that the PANI was in its conductive emeraldine state and partial crystallization. The unique morphology and molecular structure of the conducting hydrogels were expected to show unusual electric field responses. The conducting hydrogels were subjected to an electric field in NaCl solution for bending behaviors. It was demonstrated that the electric field response was improved by increasing aniline dosage, applied voltage and concentration of aqueous NaCl solution. The bending mechanism was attributed to polyelectrolyte hydrogel matrix and emeraldine PANI nanofibers.     

Examination of functional zwitterionic polymer hydrogels based on polypyridinium salt by a convenient cross-linker

In this work, two novel zwitterionic polymer hydrogels (Gel-P4VP-psl (d), Gel-P4VP-bpa (d)) and cationic polymer hydrogels (Gel-P4VP-eb (f)) were prepared for the first time. The differences of functionality between cationic polymer hydrogels and zwitterionic polymer hydrogels were studied fully. The results showed that when the molar quantity ratio of cross-linker/pyridinium unit in Gel-P4VP-psl (d) and Gel-P4VP-bpa (d) was about 0.25:1, they would have proper mechanical property, excellent antibacterial ability and antifouling ability. Correspondingly, the charge quantity ratios of negative charges/positive charges in Gel-P4VP-psl (d) and Gel-P4VP-bpa (d) could be calculated to be 1:2 theoretically. Although Gel-P4VP-eb (f) with only positive charges had strongly antibacterial ability, being lack of negative charges in cationic polymer hydrogels made its antifouling ability disappear completely. Gel-P4VP-psl (d) and Gel-P4VP-bpa (d) have potential in the application of antibacterial and antifouling materials.     

Influence of polymer matrix composition and architecture on polymer nanocomposite formation: Coarse-grained molecular dynamics simulation

Coarse-grained molecular dynamics simulations of stacks of two-dimensional platelets immersed in a polymer melt were performed to investigate aspects of the polymer matrix that promote the formation of intercalated or exfoliated nanocomposite structures. Such factors include temperature, copolymer architecture, and blend composition. Increasing the polymer-sheet attractive interaction led to binding of the sheets, where individual beads simultaneously attract two neighboring sheets, thus kinetically blocking intercalation by occupying the perimeter of the affected gallery. Polymers with a small polymer-sheet attraction, but having a strongly attractive chain end (end-functionalized polymers) minimized the bonding of adjacent sheets. These systems exhibited some sheet sliding because a majority of the confined polymer beads only interacted weakly with adjacent sheets; however, the number density of intercalated polymer was low. Mixtures of end-functionalized and nonfunctionalized polymers, however, yielded better intercalation efficiency. For the mixed system, the reduced number of highly attractive beads provided sufficient interaction for intercalation to occur, enabling greater intercalation rates, less sheet-bridging, and incorporation of the nonfunctionalized polymers into the galleries. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3272–3284, 2003     

聚合物纳米材料研究进展——Ⅱ.聚合物/无机纳米复合材料

复合物纳米材料包括纳米聚合物和聚合物／无机纳米复合材料。本文综述了聚合物／无机纳米复合材料的研究进展，重点介绍了溶胶－凝胶法，原位生成法，模板法，插层复合，沉积法，机械粉碎，分子平壤 ，溶液或融混合法的研究进展。     

Hybrid metal–polymer composites from functional block copolymers

The combination of metals and polymers in hybrid materials is a research area of great current interest. A number of methods for controlling the positioning of metallic species within polymer matrices on the nanometer scale have been developed. This highlight focuses on the use of functional block copolymers for the localization of metal species, especially nanoparticles, on the nanometer scale through block copolymer phase segregation. Research from the author's group on the use of alkyne‐functional block copolymers for the preparation of cobalt‐containing materials is discussed in this context. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4323–4336, 2005     

Differential dynamic microscopy for the characterization of polymer systems

This review summarizes recent progress in investigating polymer systems by using Differential dynamic microscopy (DDM), a rapidly emerging approach that transforms a commercial microscope by combining real-space information with the powerful capabilities of conventional light scattering analysis. DDM analysis of a single microscope movie gives access to the sample dynamics in a wide range of scattering wave-vectors, enabling contemporary polymer science experiments that would be difficult or impossible with standard light scattering techniques. Examples of application include the characterization of polymer solutions and networks, of polymer based colloidal systems, of biopolymers, and of cellular motility in polymeric fluids. Further applications of DDM to a variety of polymer systems are suggested to be just behind the corner and it is thus likely that DDM will become a tool of choice of the modern experimental polymer scientists.     

Dielectric relaxation spectroscopy in poly(hydroxyethyl acrylates)/water hydrogels

The electrical and dielectric properties of poly(hydroxyethyl acrylate), PHEA, hydrogels were studied by means of dielectric relaxation spectroscopy in wide ranges of frequencies (5–2 × 10⁹ Hz), temperatures (173–363 K) and water contents (0.065–0.46, g of water per gram of dry material). The secondary dipolar mechanisms (γ and β_sw) and the dc conductivity mechanism were studied in detail by analyzing the dielectric susceptibility data within the complex permittivity formalism, the modulus formalism, and the complex impedance formalism. For both mechanisms molecular mobility was found to increase with increasing temperature or increasing water content (T-f-h superposition principle). The energy parameters and the shape parameters of the response were determined for both mechanisms at several water contents and temperatures. The temperature dependence of dc conductivity was found to change from Vogel-Tamman-Fulcher (VTF) type to Arrhenius type at water contents of ca. 0.30. At water contents lower than about 0.30 the hydrogels are homogeneous whereas at higher water contents a separate water phase appears. In terms of the strong/fragile classification scheme our results suggest that the PHEA hydrogels are fragile systems. ©1995 John Wiley & Sons, Inc.     

Molecular dynamic study of dielectric polarization and ferroelectricity in a model polar polymer

Molecular dynamics simulations are used to explore the polarization response of a lamellar crystal consisting of folded chains of a highly simplified model polar polymer. The system is based on a united atom model of polyethylene with constrained bond lengths and bond angles, and it is endowed with artificial partial charges placed on the united atoms to give it a simple polar character. Simulations performed with various temperatures, electric field directions, and electric field application histories reveal a complicated sequence of reorientation processes, including pronounced ferroelectric behavior. The sequence includes a weak, temperature‐independent prompt response, and a slow‐rising delay regime with stretched exponential behavior and thermally‐activated reorientation parameters consistent with trans‐gauche (TG) barrier crossings in the amorphous phase. When the delay regime has progressed sufficiently, a primary large‐amplitude response due to organized rotation of large subsegments in the crystalline phase occurs in a rapid manner that requires relatively few TG barrier crossings. A final, extremely slow rise in residual polarization completes the sequence. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 740–759     

Orientation transition of nanorods induced by polymer brushes

Coarse-grained molecular dynamics simulations are used to explore the spatial orientations and conformational transitions of nanorods (NRs) within semiflexible polymer brushes. The orientations of the NR clusters are controlled by the competition between the entropy cost for NRs infiltrated into the polymer brushes and the attractive energy between NRs and polymer brushes. By reducing the grafting density or enhancing the number of NRs, the NR cluster experiences an orientation transition from the vertical direction to the horizontal direction. The semiflexible polymer brushes are regarded as the soft confinements for the NRs, and the soft confinements can induce the formation of the NR aggregation under the effect of the depletion attractions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Characterization of water in polysaccharide hydrogels by DSC

Water molecules in hydrogels were classified into three categories according to phase transition behavior; non-freezing, freezing bound and free water. Melting, crystallization, and glass transition of water in hydrogels reflected the state of the water interacting with polysaccharides. Freezing bound water formed metastable ice by slow cooling and formed amorphous ice by quenching. From the isothermal crystallization measurement, nucleation rate and crystal growth rate were obtained. The crystal growth rate of freezing bound water was about ten times slower than that of free water. The DSC characterization of water in hydrogels was summarized.

---

Zusammenfassung In übereinstimmung mit dem Phasenum wandlungsverhalten werden Wassermoleküle in Hydrogelen in drei Kategorien eingestuft; nicht gefrierendes, gefrierendes gebundenes und freies Wasser. Das Schmelzen, die Kristallisation und die Glasumwandlung von Wasser in Hydrogen wiederspiegeln den Zustand von Wasser, welches in Wechselwirkung mit Polysacchariden tritt. Gefrierendes gebundenes Wasser bildet metastabiles Eis durch langsames Abkühlen und amorphes Eis durch Abschrecken. Anhand isothermer Kristallisationsmessungen wurden Keimbildungsgeschwindigkeit und Kristallwachstumsgeschwindigkeit erhalten. Die Kristallwachstumsgeschwindigkeit von gefrierendem gebundenem Wasser liegt zehnmal niedriger als die von freiem Wasser.