Phosgene‐free synthesis of polypeptides: Useful synthesis for hydrophobic polypeptides through polycondensation of activated urethane derivatives of α‐amino acids

We report a useful synthetic method of polypeptides using a series of urethane derivative of α‐amino acids (l ‐leucine, l ‐phenylalanine, l ‐valine, l ‐alanine, l ‐isoleucine, l ‐methionine), which are readily synthesized by N‐carbamoylation of tetrabutylammonium salts of α‐amino acids with diphenyl carbonate. Heating these urethane derivatives in N,N‐dimethylacetamide in the presence of n‐butylamine successfully gave the corresponding polypeptides with well‐defined structures through polycondensation with the elimination of phenol and CO₂. The matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry investigation showed that the resulting polypeptides had an n‐BuNH₂‐incorporated initiating end and an amino group at propagating end. These results strongly indicated that primary amines served as an initiator in this polycondensation system. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3726–3731     

Synthesis of poly(ethylene glycol)/polypeptide/poly(D,L‐lactide) copolymers and their nanoparticles

Core‐shell structured nanoparticles of poly(ethylene glycol) (PEG)/polypeptide/poly(D ,L ‐lactide) (PLA) copolymers were prepared and their properties were investigated. The copolymers had a poly(L ‐serine) or poly(L ‐phenylalanine) block as a linker between a hydrophilic PEG and a hydrophobic PLA unit. They formed core‐shell structured nanoparticles, where the polypeptide block resided at the interface between a hydrophilic PEG shell and a hydrophobic PLA core. In the synthesis, poly(ethylene glycol)‐b‐poly(L ‐serine) (PEG‐PSER) was prepared by ring opening polymerization of N‐carboxyanhydride of O‐(tert‐butyl)‐L ‐serine and subsequent removal of tert‐butyl groups. Poly(ethylene glycol)‐b‐poly(L ‐phenylalanine) (PEG‐PPA) was obtained by ring opening polymerization of N‐carboxyanhydride of L ‐phenylalanine. Methoxy‐poly(ethylene glycol)‐amine with a MW of 5000 was used as an initiator for both polymerizations. The polymerization of D ,L ‐lactide by initiation with PEG‐PSER and PEG‐PPA produced a comb‐like copolymer, poly(ethylene glycol)‐b‐[poly(L ‐serine)‐g‐poly(D ,L ‐lactide)] (PEG‐PSER‐PLA) and a linear copolymer, poly(ethylene glycol)‐b‐poly(L ‐phenylalanine)‐b‐poly(D ,L ‐lactide) (PEG‐PPA‐PLA), respectively. The nanoparticles obtained from PEG‐PPA‐PLA showed a negative zeta potential value of ?16.6 mV, while those of PEG‐PSER‐PLA exhibited a positive value of about 19.3 mV. In pH 7.0 phosphate buffer solution at 36 °C, the nanoparticles of PEG/polypeptide/PLA copolymers showed much better stability than those of a linear PEG‐PLA copolymer having a comparable molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thermoplastic elastomers based on poly(l‐Lysine)‐Poly(ε‐Caprolactone) multi‐block copolymers

Novel thermoplastic elastomers based on multi‐block copolymers of poly(l ‐lysine) (PLL), poly(N‐ε‐carbobenzyloxyl‐l ‐lysine) (PZLL), poly(ε‐caprolactone) (PCL), and poly(ethylene glycol) (PEG) were synthesized by combination of ring‐opening polymerization (ROP) and chain extension via l ‐lysine diisocyanate (LDI). SEC and ¹H NMR were used to characterize the multi‐block copolymers, with number‐average molecular weights between 38,900 and 73,400 g/mol. Multi‐block copolymers were proved to be good thermoplastic elastomers with Young's modulus between 5 and 60 MPa and tensile strain up to 1300%. The PLL‐containing multi‐block copolymers were electrospun into non‐woven mats that exhibited high surface hydrophilicity and wettability. The polypeptide–polyester materials were biocompatible, bio‐based and environment‐friendly for promising wide applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3012–3018     

Synthesis and self‐assembly behavior of amphiphilic polypeptide‐based brush‐coil block copolymers

Synthesis and self‐assembly behavior of a novel amphiphilic brush‐coil block copolymer bearing hydrophilic poly(ethylene glycol) segment and hydrophobic polypeptide brush segment were presented in this work. The poly(γ‐benzyl‐L ‐glutamate) (PBLG) brush is synthesized through “grafting from” strategy by ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride (BLG‐NCA) initiated by the flanking terminal primary amino group of macroinitiator. The copolymers were characterized by ¹H NMR, gel permeation chromatography, Fourier transform infrared, circular dichroism spectrum, and differential scanning calorimetry. The self‐assembly behavior of the brush‐coil block copolymers in aqueous solution was investigated by means of transmission electron microscopy, scanning electron microscopy, atomic force microscopy, and laser light scattering. Spherical micelles were observed when the length of PBLG brush is shorter. The aggregate morphology transforms to spindle‐like micelles and then to rod‐like micelles, as the length of polypeptide brush increases. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5967–5978, 2009     

Synthesis and characterization of polyphenylenes with polypeptide and poly(ethylene glycol) side chains

We report a novel approach for fabrication of multifunctional conjugated polymers, namely poly(p‐phenylene)s (PPPs) possessing polypeptide (poly‐l ‐lysine, PLL) and hydrophilic poly(ethylene glycol) (PEG) side chains. The approach is comprised of the combination of Suzuki coupling and in situ N‐carboxyanhydride (NCA) ring‐opening polymerization (ROP) processes. First, polypeptide macromonomer was prepared by ROP of the corresponding NCA precursor using (2,5‐dibromophenyl)methanamine as an initiator. Suzuki coupling reaction of the obtained polypeptide and PEG macromonomers both having dibromobenzene end functionality using 1,4‐benzenediboronic acid as the coupling partner in the presence of palladium catalyst gave the desired polymer. A different sequence of the same procedure was also employed to yield polymer with essentially identical structure. In the reverse sequence mode, low molar mass monomer (2,5‐dibromophenyl)methanamine, and PEG macromonomer were coupled with 1,4‐benzenediboronic acid in a similar way followed by ROP of the L‐Lysine NCA precursor through the primary amino groups of the resulting polyphenylene. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1785–1793     

Preparation of chiral amino acid materials and the study of their interactions with 1,1‐Bi‐2‐naphthol

The amino acid tryptophan has been converted into acrylamide monomers using L /D ‐tryptophan methyl ester forming the enantiopure chiral monomers. Attempts were made to polymerize these monomers via reversible addition fragmentation chain transfer (RAFT) polymerization to form poly(tryptophan). Unfortunately, this proved difficult, and instead, a postpolymerization modification route was used by first synthesizing poly(pentafluorophenyl acrylate) via RAFT, which was then substituted with L ‐tryptophan methyl ester to give poly(L ‐tryptophan). The interactions of the newly synthesized tryptophan monomers, as well as previously reported phenylalanine monomers, were studied in the presence of rac‐BINOL. It has been shown that the enantiomers of tryptophan have a stronger interaction with BINOL than phenylalanine and this has been attributed to the larger π system on the side chain. By monitoring the shifts and splitting of the phenolic protons of BINOL, it has been observed that S‐BINOL interacts more favorably with L ‐monomer enantiomers and R‐BINOL with D ‐monomer enantiomers. Similar interactions have also been seen with poly(phenylalanine) and the newly synthesized poly(tryptophan) materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Fluorinated PEG‐Polypeptide Polyplex Micelles Have Good Serum‐Resistance and Low Cytotoxicity for Gene Delivery

A novel PEGylation polypeptide, poly(ethylene glycol)‐b‐poly(l ‐lysine)‐b‐poly(l ‐cysteine) (PEG‐PLL‐PCys) triblock copolymer is synthesized via the sequential ring‐opening polymerization of amino acid N‐carboxyanhydrides initiated by methoxypolyethylene glycol amine (mPEG‐NH₂, M _w is 2 kDa). Subsequently, the obtained polypeptide is partially conjugated with fluorocarbon chains via disulfide exchange reaction. PLL segment can condense plasmid DNA through an electrostatic force to form a complex core, PEG segment surrounding the complex like a corona can prevent the complex from precipitation and reduce the adsorption of serum, while PCys segment with fluorocarbon can enhance the cellular uptake and the stability of the formed polyplex micelles in physiological conditions. Experiment results exhibit that the fluorinated polypeptides have low cytotoxicity and good gene transfection efficiency even in the presence of 50% fetal bovine serum.

     

Effect of PLGA block molecular weight on gelling temperature of PLGA‐PEG‐PLGA thermoresponsive copolymers

Thermoresponsive, biodegradable polymeric hydrogel networks are used widely in medicinal applications. Poly(d ,l ‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(d ,l ‐lactic acid‐co‐glycolic acid) (PLGA‐PEG‐PLGA) triblock copolymers exhibit a sol–gel transition upon heating. The effect of PLGA block and PEG chain molecular weights (MWs) on the gelling temperature of polymer aqueous solution (20% w/w) is described. All polymer solutions convert into a hard gel within 2 °C of the gelling temperature. The release properties of the gels were displayed using paracetamol as a representative drug. A linear relation is described between the gelling temperature and PLGA block MW. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 35–39     

Exploration of tertiary aminosquaramide bifunctional organocatalyst in controlled/living ring‐opening polymerization of l‐lactide

A series of tertiary aminosquaramides as bifunctional organocatalysts in the ring‐opening polymerization (ROP) of l ‐lactide (l ‐LA) were developed, allowing the activation of both the l ‐LA monomer and the alcohol group of the initiator/propagating species. Further, the impact of tertiary nitrogen substituents on catalytic activity in ROP of l ‐LA was explored. The tertiary aminosquaramide— an air‐stable and moisture‐stable catalyst—exhibited superior activity in contest with thiourea counterpart when both were equipped with a similar tertiary amine group. Kinetic and chain‐extension experiments indicated that the formed poly(l ‐LA) is featured with narrow polydispersity and high end‐group fidelity, hallmarks of a living polymerization process. The initiator efficiency was further executed at ease by preparation of an ABA triblock copolymer poly (l ‐LA)‐b‐poly (ethylene glycol)‐b‐poly (l ‐LA) in the presence of a dual‐headed PEG macroinitiator. ¹H NMR titration experiments suggested a bifunctional catalytic mechanism, wherein both the l ‐LA monomer and the propagating hydroxyl group were activated en route to polymerization. The ¹H NMR, SEC, and MALDI‐TOF MS measurements validated the quantitative incorporation of the initiator in the polymeric chains and enchainment over competitive trans‐esterification reaction. Overall, the structure‐activity relationships were surveyed to uncover aminosquaramide as a new bifunctional dual hydrogen‐bond donor catalyst for living ROP of l ‐LA. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2483–2493     

The effect of cationic groups on the stability of 19F MRI contrast agents in nanoparticles

Fluorine‐19 (¹⁹F)‐based contrast agents are increasingly used for magnetic resonance imaging. Conjugated to polymers, they provide an excellent quantitative imaging tool to detect the movement of the polymeric nanoparticles in vivo as there is no background signal in tissue. One of the challenges is the decline in signal intensity when the conjugated hydrophobic fluorinated functionalities aggregate. Therefore, a new fluorinated monomer was prepared from l ‐arginine that carries a 2,2,2‐trifluoroethyl functional group for imaging. The resulting monomer, 2,2,2‐trifluoroethylamide l ‐arginine methacrylamide (3FArgMA), was copolymerized with poly(ethylene glycol) methyl ether methacrylate (PEGMEMA), [2‐(2,3,4,6‐tetra‐O‐acetyl‐α‐d ‐mannopyranosyloxy)ethyl methacrylate or 1‐O‐methacryloyl‐2,3:4,5‐di‐O‐isopropylidene‐β‐d ‐fructopyranose, respectively, using poly(methyl methacrylate) macro‐reversible addition–fragmentation chain transfer polymerization agent. The resulting block copolymers, which varied in 3FArgMA content, were self‐assembled into micelles of hydrodynamic diameters from 25 to 60 nm. The permanently positively charged arginine functionality on the 3FArgMA displayed repulsive forces against aggregation enabling high spin–spin relaxation times (T₂) in acidic as well as alkaline solutions. However, the longer poly(ethylene glycol) side functionality in PEGMEMA enabled better steric stabilization (T₂~30 ms) while the short fructose side chain was not enough to maintain high T₂ values, in particular when a higher 3FArgMA content was used. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1994–2001     

Synthesis of polyester having pendent hydroxyl groups via regioselective dehydration polycondensations of dicarboxylic acids and diols by low temperature polycondensation

In this article, we describe the one‐step synthesis of polyesters having pendent hydroxyl groups by Lewis acid‐catalyzed, regioselective, dehydration polycondensations of diols (glycerol and sorbitol) and dicarboxylic acids [tartaric acid (TA) and malic acid (MA)] containing pendent hydroxyl groups, using low temperature polycondensation technique. Direct polycondensations of TA or MA and 1,9‐nonanediol catalyzed by scandium trifluoromethanesulfonate [Sc(OTf)₃] successfully yielded linear polyesters having hydroxyl functionality (M_n = ca. 1.0 × 10⁴). To demonstrate the reactivity of the pendent hydroxyl group, a glycosidation was performed. Poly(nonamethylene L ‐malate) showed significant higher biodegradability, compared with poly(nonamethylene L ‐tartrate) or poly(nonamethylene succinate). Stable poly(nonamethylene L ‐tartrate) emulsion could be prepared using poly(vinyl alcohol) as the surfactant, although emulsions consisting of poly(nonamethylene succinate) were unstable and phase‐separated within a few days. Furthermore, direct polycondensations of TA and diethylene glycol (DEG) or triethylene glycol (TEG) successfully produced water‐soluble polyesters having hydroxyl groups. This new polycondensation system may be extremely effective not only for advanced material design using functional monomers but also for effective utilization of biomass resources as chemical substances. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5747–5759, 2009     

Impact of Cationic Charge Density and PEGylated Poly(amino acid) Tercopolymer Architecture on Their Use as Gene Delivery Vehicles. Part 1: Synthesis,Self‐Assembly,and DNA Complexation

The interaction of PEGylated poly(amino acid)s with their biological targets depends on their chemical nature and spatial arrangement of their building blocks. The synthesis, self‐assembly, and DNA complexation of ABC terblock copolymers consisting of poly(ethylene glycol), (PEG), poly(l ‐lysine), and poly(l ‐leucine), are reported. Block copolymers are produced by a metal‐free, living ring‐opening polymerization of respective amino acid N‐carboxyanhydrides using amino‐terminated PEG as macroinitiator: (PEG‐b‐p(l ‐Lys)_x‐b‐p(l ‐Leu)_y, PEG‐b‐p(l ‐Leu)_x‐b‐p(l ‐Lys)_y, and PEG‐b‐p((l ‐Lys)_x‐co‐p(l ‐Leu)_y). Sizes of self‐assembled nanoparticles depend on the formation method. The nanoprecipitation method proves useful for copolymers with the poly(l ‐lysine) block protected as trifluoroacetate, effective diameters range between 92 and 132 nm, while direct dissolution in distilled water is suitable for the deprotected copolymers, yielding effective diameters between 52 and 173 nm. Critical micelle concentration (CMC) analyses corroborate particle size analyses and show a distinct impact of the molecular architecture; the lowest CMC (8 µg mL⁻¹) is observed when the poly(l ‐leucine) segment forms the C‐block and the hydrophilic, disassembly driving poly(l ‐lysine) segment is short. DNA complexation, evaluated by gel motility and RiboGreen analyses, depends strongly on the molecular architecture. A more efficient DNA complexation is observed when poly(l ‐lysine) and poly(l ‐leucine) form individual blocks as opposed to them forming a copolymer.     

Thermal gelation or gel melting: (ethylene glycol)113‐(l‐alanine)12 and (ethylene glycol)113‐(l‐lactic acid)12

When PEG (M.W.～5000 Daltons) is conjugated to poly(l ‐alanine), the polymer aqueous solutions (<10.0 wt.%) undergo sol‐to‐gel (thermal gelation), whereas it is conjugated to poly(l ‐lactic acid), the polymer aqueous solutions (>30.0 wt.%) undergo gel‐to‐sol (gel melting) as the temperature increases. In the search for molecular origins of such a quite different phase behavior, poly(ethylene glycol)‐poly(l ‐alanine) (PEG‐PA; EG₁₁₃‐A₁₂) and poly(ethylene glycol)‐poly(l ‐lactic acid) (PEG‐PLA; EG₁₁₃‐LA₁₂) are synthesized and their aqueous solution behavior is investigated. PEG‐PAs with an α‐helical core assemble into micelles with a broad size distribution, and the dehydration of PEG drives the aggregation of the micelles, leading to thermal gelation, whereas increased molecular motion of the PLA core overwhelms the partial dehydration of PEG, thus gel melting of the PEG‐PLA aqueous solutions occurs. The core‐rigidity of micelles must be one of the key factors in determining whether a polymer aqueous solution undergoes sol‐to‐gel or gel‐to‐sol transition, as the temperature increases. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, , 52, 2434–2441     

Synthesis and UCST‐type phase behavior of OEGylated poly(γ‐benzyl‐l‐glutamate) in organic media

A series of OEGylated poly(γ‐benzyl‐l ‐glutamate) with different oligo‐ethylene‐glycol side‐chain length, molecular weight (MW = 8.4 × 10³ to 13.5 × 10⁴) and narrow molecular weight distribution (PDI = 1.12–1.19) can be readily prepared from triethylamine initiated ring‐opening polymerization of OEGylated γ‐benzyl‐l ‐glutamic acid based N‐carboxyanhydride. FTIR analysis revealed that the polymers adopted α‐helical conformation in the solid‐state. While they showed poor solubility in water, they exhibited a reversible upper critical solution temperature (UCST)‐type phase behavior in various alcoholic organic solvents (i.e., methanol, ethanol, 1‐propanol, 1‐butanol, 1‐pentanol, and isopropanol). Variable‐temperature UV–vis analysis revealed that the UCST‐type transition temperatures (T_pts) of the resulting polymers were highly dependent on the type of solvent, polymer concentration, side‐ and main‐chain length. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1348‐1356     

Synthesis of poly(Nε-phenoxycarbonyl-l-lysine) by polycondensation of activated urethane derivative and its application for selective modification of side chain with amines

We report a methodology for the synthesis of Nε-phenoxycarbonyl-protected poly(l -lysine) on the side chain by chain growth polycondensation of Nα,Nε-bis(phenoxycarbonyl)-l -lysine proceeded through the selective elimination of phenol and CO₂ from the Nα phenoxycarbonyl moiety at 50 °C in N,N-dimethylacetamide in the presence of a primary amine used as an initiator. After optimization of reaction condition, the addition of acetic acid during polycondensation proved effective for the realization of the predicted molecular weight and narrow dispersity of the corresponding polypeptide by adjusting the feed ratio of monomer to the amine initiator because of the suppression of interchain coupling that occurs between the amino terminus of poly(l -lysine) and the Nε-phenoxycarbonyl group on the polymer side chains. Furthermore, taking advantage of the potentially reactive Nε-phenoxycarbonyl moiety on the side chain, post-polymerization modification was effectively achieved by the nucleophilic reaction of amine compounds including primary, secondary, and aromatic amines through the formation of urea linkage, providing a useful platform for synthesis of selective side chain functionalization of poly(l -lysine) samples. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2522–2530     

Synthesis of poly[N‐isopropylacrylamide‐g‐poly(ethylene glycol)] with a reactive group at the poly(ethylene glycol) end and its thermosensitive self‐assembling character

Poly[N‐isopropylacrylamide‐g‐poly(ethylene glycol)]s with a reactive group at the poly(ethylene glycol) (PEG) end were synthesized by the radical copolymerization of N‐isopropylacrylamide with a PEG macromonomer having an acetal group at one end and a methacryloyl group at the other chain end. The temperature dependence of the aqueous solutions of the obtained graft copolymers was estimated by light scattering measurements. The intensity of the light scattering from aqueous polymer solutions increased with increasing temperature. In particular, at temperatures above 40°C, the intensity abruptly increased, indicating a phase separation of the graft copolymer due to the lower critical solution temperature (LCST) of the poly(N‐isopropylacrylamide) segment. No turbidity was observed even above the LCST, and this suggested a nanoscale self‐assembling structure of the graft copolymer. The dynamic light scattering measurements confirmed that the size of the aggregate was in the range of several tens of nanometers. The acetal group at the end of the PEG graft chain was easily converted to the aldehyde group by an acid treatment, which was analyzed by ¹H NMR. Such a temperature‐induced nanosphere possessing reactive PEG tethered chains on the surface is promising for new nanobased biomedical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1457–1469, 2006     

Molecular captain: A light‐sensitive linker molecule in poly(ethylene glycol)‐poly(L‐alanine)‐poly(ethylene glycol) triblock copolymer directs molecular nano‐assembly,conformation, and sol‐gel transition

We report a poly(ethylene glycol)‐poly(L ‐alanine)‐azobenzene‐poly(L ‐alanine)‐poly(ethylene glycol) (PEG‐PA‐Z‐PA‐PEG) as a temperature and light sensitive polymer. The poly(ethylene glycol)‐poly(L ‐alanine) diblock copolymers with a flexible‐rigid block structure were coupled by an azobenzene group that undergoes a reversible configurational change between “trans” and “cis” upon exposure to UV and vis light. The single azobenzene molecule embedded in the middle of a block copolymer with a flexible (shell)‐rigid (core) structure significantly affected molecular assembly, micelle size, polypeptide secondary structure, and sol‐to‐gel transition temperature of the polymer aqueous solution, depending on its exposure to UV or vis light. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of biodegradable pH and reduction dual‐sensitive polymeric micelles for doxorubicin delivery

Novel pH and reduction dual‐sensitive biodegradable polymeric micelles for efficient intracellular delivery of anticancer drugs were prepared based on a block copolymer of methyloxy‐poly(ethylene glycol)‐b‐poly[(benzyl‐l ‐aspartate)‐co‐(N‐(3‐aminopropyl) imidazole‐l ‐aspartamide)] [mPEG‐SS‐P(BLA‐co‐APILA), MPBA] synthesized by a combination of ring‐opening polymerization and side‐chain reaction. The pH/reduction‐responsive behavior of MPBA was observed by both dynamic light scattering and UV–vis experiments. The polymeric micelles and DOX‐loaded micelles could be prepared simply by adjusting the pH of the polymer solution without the use of any organic solvents. The drug release study indicated that the DOX‐loaded micelles showed retarded drug release in phosphate‐buffered saline at pH 7.4 and a rapid release after exposure to weakly acidic or reductive environment. The empty micelles were nontoxic and the DOX‐loaded micelles displayed obvious anticancer activity similar to free DOX against HeLa cells. Confocal microscopy observation demonstrated that the DOX‐loaded MPBA micelles can be quickly internalized into the cells, and effectively deliver the drugs into nuclei. Thus, the pH and reduction dual‐responsive MPBA polymeric micelles are an attractive platform to achieve the fast intracellular release of anticancer drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1771–1780     

Fine tuning the assembly and gel behaviors of PEGylated polypeptide conjugates by the copolymerization of l‐alanine and γ‐benzyl‐l‐glutamate N‐carboxyanhydrides

Tuning the secondary structure of polypeptide is an effective strategy to modulate the assembly behaviors of polypeptide‐based copolymers. In this study, ring‐opening polymerization of l ‐alanine (Ala) and γ‐benzyl‐l ‐glutamate (BLG) N‐carboxyanhydrides was adopted using mPEG‐NH₂ as the initiator to prepare mPEG‐poly(l ‐alanine‐co‐γ‐benzyl‐l ‐glutamate) (PEAB) copolymers with various Ala to BLG ratios. ¹H NMR spectra and GPC test confirmed their well‐defined chemical structures. FT‐IR spectra indicated that at the powder state, all copolymers adopted both β‐sheet and α‐helical conformations. With the content of PBLG increased, the crystallization temperature and melting points of PEAB copolymers first rose then fell indicated by DSC curves. The self‐assembly of PEAB copolymers in dilute aqueous solution studied by DLS, TEM and circular dichroism spectra showed that PEAB copolymers self‐assembled into nanostructures with diverse morphologies and sizes due to distinct polypeptide conformations. Rheological analysis indicated that the alteration of the polypeptide composition can effectively modulate the modulus of PEAB assemblies in concentrated solutions. In all, copolymerization of two hydrophobic amino acid N‐carboxyanhydrides into the polypeptide block maybe an effective approach for modulating the assembly properties of PEGylated polypeptide. Besides, nanosilver‐encapsulated PEA or PEAB hydrogel showed promising antibacterial effect against Staphylococcus aureus and Bacillus subtillis. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1512–1523     

Synthesis of high‐molecular‐weight aliphatic–aromatic copolyesters from poly(ethylene‐co‐1,6‐hexene terephthalate) and poly(L‐lactic acid) by chain extension

A series of aliphatic–aromatic multiblock copolyesters consisting of poly(ethylene‐co‐1,6‐hexene terephthalate) (PEHT) and poly(L ‐lactic acid) (PLLA) were synthesized successfully by chain‐extension reaction of dihydroxyl terminated PEHT‐OH prepolymer and dihydroxyl terminated PLLA‐OH prepolymer using toluene‐2,4‐diisoyanate as a chain extender. PEHT‐OH prepolymers were prepared by two step reactions using dimethyl terephthalate, ethylene glycol, and 1,6‐hexanediol as raw materials. PLLA‐OH prepolymers were prepared by direct polycondensation of L ‐lactic acid in the presence of 1,4‐butanediol. The chemical structures, the molecular weights and the thermal properties of PEHT‐OH, PLLA‐OH prepolymers, and PEHT‐PLLA copolymers were characterized by FTIR, ¹H NMR, GPC, TG, and DSC. This synthetic method has been proved to be very efficient for the synthesis of high‐molecular‐weight copolyesters (say, higher than M_w = 3 × 10⁵ g/mol). Only one glass transition temperature was found in the DSC curves of PEHT‐PLLA copolymers, indicating that the PLLA and PEHT segments had good miscibility. TG curves showed that all the copolyesters had good thermal stabilities. The resulting novel aromatic–aliphatic copolyesters are expected to find a potential application in the area of biodegradable polymer materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5898–5907, 2009