Using Cyclopenta[2,1‐b:3,4‐c′]dithiophene‐4‐one as a Building Block for Low‐Bandgap Conjugated Copolymers Applied in Solar Cells

A novel electron‐accepting unit cyclopenta[2,1‐b:3,4‐c′]dithiophene‐4‐one (CPDTO‐c′), which is an isomer of CPDTO‐b′ was developed. CPDTO‐c′ can be incorporated into the D–A backbone through 5, 7 positions. The 2 position of CPDTO‐c′ can be easily functionalized with an electron‐withdrawing chain. By copolymerizing CPDTO‐c′ with four different donor units: benzo[1,2‐b:4,5‐b′]dithiophene (BDT), dithieno[3,2‐b:2′,3′‐d]silole (DTS), carbazole, and fluorene, four new conjugated copolymers P1 – P4 were obtained. All these polymers have good solubility and low‐lying HOMO energy levels (−5.41 ∼ −5.92 eV). Among them, P1 and P2 exhibit broad absorption and narrow optical bandgaps of 1.91 and 1.72 eV, respectively. Solar cells based on P1 /PC₇₁BM afforded a PCE up to 2.72% and a high V_oc up to ∼0.9 V.     

Synthesis and photovoltaic properties of thieno[3,4‐b]pyrazine or dithieno[3′,2′:3,4;2″,3″:5,6]benzo[1,2‐d]imidazole‐containing conjugated polymers

Novel conjugated polymers composed of benzo[1,2‐b:4,5‐b′]dithiophene and thieno[3,4‐b]pyrazine or dithieno[3′,2′:3,4;2″,3″:5,6]benzo[1,2‐d]imidazole units are synthesized by Stille polycondensation. The resulting polymers display a longer wavelength absorption and well‐defined redox activities. The effective intramolecular charge‐transfer and energy levels of all polymers are elucidated by computational calculations. Bulk‐heterojunction solar cells based on these polymers as p‐type semiconductors and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) as an n‐type semiconductor are fabricated, and their photovoltaic performances are for the first time evaluated. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1067–1075     

Medium band gap conjugated polymers from thienoacene derivatives and pentacyclic aromatic lactam as promising alternatives of poly(3‐hexylthiophene) in photovoltaic application

Two alternating medium band gap conjugated polymers (PBDT‐TPTI and PDTBDT‐TPTI) derived from 4,8‐bis(4,5‐dioctylthien‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene (BDT‐T) or 5,10‐bis(4,5‐didecylthien‐2‐yl)dithieno[2,3‐d:2′,3′‐d′]benzo[1,2‐b:4,5‐b′]dithiophene (DTBDT‐T) with pentacyclic aromatic lactam of N,N‐didodecylthieno[2′,3′:5,6]pyrido[3,4‐g]thieno[3,2‐c]‐iso‐quinoline‐5,11‐dione (TPTI), are synthesized and characterized. The comparative investigation of the photostabilities of the copolymers revealed that the PDTBDT‐TPTI film exhibited the comparable photostability in relative to P3HT. Meanwhile, the inverted photovoltaic cells (i‐PVCs) from the blend films of PBDT‐TPTI and/or PDTBDT‐TPTI with PC₇₁BM, in which poly[(9,9‐bis(3′‐(N,N‐dimethylamino)propyl)‐2,7‐fluorene)‐alt‐2,7‐(9,9‐dioctylfluorene)] were used as cathode modifying interlayer, presented higher power conversion efficiencies (PCEs) of 5.98% and 6.05% with photocurrent response ranging from 300 nm to 650 nm in contrast with the PCEs of 4.48% for the optimal inverted PVCs from P3HT/PC₇₁BM under AM 1.5 G 100 mW/cm². The PCEs of the i‐PVCs from PBDT‐TPTI and PDTBDT‐TPTI were improved to 7.58% and 6.91% in contrast to that of 0.02% for the P3HT‐based i‐PVCs, and the photocurrent responses of the devices were extended to 300–792 nm, when the ITIC was used as electron acceptor materials. The results indicate that the PBDT‐TPTI and PDTBDT‐TPTI can be used as the promising alternatives of notable P3HT in the photovoltaic application. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 85–95     

New copolymers with thieno[3,2‐b]thiophene or dithieno[3,2‐b:2′,3′‐d]thiophene units possessing electron‐withdrawing 4‐cyanophenyl groups: Synthesis and photophysical,electrochemical, and electroluminescent properties

New monomers containing 4‐cyanophenyl (–PhCN) groups attached to a thieno[3,2‐b]thiophene (TT) or dithieno[3,2‐b:2′,3′‐d]thiophene (DTT) structure were synthesized and characterized as 4‐(2,5‐dibromothieno[3,2‐b]thiophen‐3‐yl)benzonitrile (Br–TT–PhCN) or 4,4′‐(2,6‐dibromodithieno[3,2‐b:2′,3′‐d]thiophene‐3,5‐diyl)dibenzonitrile (Br–DTT–PhCN). The Suzuki coupling of 9,9‐dioctylfluorene‐2,7‐diboronic acid bis(1,3‐propanediol)ester and the Br–TT–PhCN or Br–DTT–PhCN monomer was utilized for the syntheses of novel copolymers poly{9,9‐dioctylfluorene‐2,7‐diyl‐alt‐3‐(4′‐cyanophenyl)thieno[3,2‐b]thiophene‐2,5‐diyl} (PFTT–PhCN) and poly{9,9‐dioctylfluorene‐2,7‐diyl‐alt‐3,5‐bis(4′‐cyanophenyl)dithieno[3,2‐b:2′,3′‐d]thiophene‐2,6‐diyl} (PFDTT–PhCN), respectively. The photophysical, electrochemical, and electroluminescent (EL) properties of these novel copolymers were studied. Their photoluminescence (PL) exhibited the same emission maximum for both copolymers in solution. Red‐shifted PL emissions were observed in the thin films. The PL emission maximum of PFTT–PhCN was more significantly redshifted than that of PFDTT–PhCN, indicating more pronounced excimer or aggregate formation in PFTT–PhCN. The ionization potential (HOMO level) and electron affinity (LUMO level) values were 5.54 and 2.81 eV, respectively, for PFTT–PhCN and were 5.57 and 2.92 eV, respectively, for PFDTT–PhCN. Polymer light‐emitting diodes (LEDs) with copolymer active layers were fabricated and studied. Anomalous behavior and memory effects were observed from the current–voltage characteristics of the LEDs for both copolymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2629–2638     

Efficient organic photovoltaic cells based on thiazolothiazole and benzodithiophene copolymers with π‐conjugated bridges

New donor–π–acceptor (D–π–A) type conjugated copolymers, poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(4‐octylthiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐tTz), and poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(6‐octylthieno[3,2‐b]thiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐ttTz) were synthesized and characterized with the aim of investigating their potential applicability to organic photovoltaic active materials. While copolymer PBDT‐tTz showed a zigzagged non‐linear structure by thiophene π‐bridges, PBDT‐ttTz had a linear molecular structure with thieno[3,2‐b]thiophene π‐bridges. The optical, electrochemical, morphological, and photovoltaic properties of PBDT‐tTz and PBDT‐ttTz were systematically investigated. Furthermore, bulk heterojunction photovoltaic devices were fabricated by using the synthesized polymers as p‐type donors and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester as an n‐type acceptor. PBDT‐ttTz showed a high power conversion efficiency (PCE) of 5.21% as a result of the extended conjugation arising from the thienothiophene π‐bridges and enhanced molecular ordering in the film state, while PBDT‐tTz showed a relatively lower PCE of 2.92% under AM 1.5 G illumination (100 mW/cm²). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1978–1988     

Enhancement of OFET performance of semiconducting polymers containing benzodithiophene upon surface treatment with organic silanes

Poly{4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]dithiophene} ( P1 ) homopolymer and poly{4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]dithiophene ‐alt‐thiophene} ( P2 ) alternating copolymer have been synthesized by Stille coupling polymerization. The field‐effect mobilities of both polymers were measured on both untreated and silane‐treated OFET devices. Various silanes were selected to allow an incremental increase in the hydrophobicity of the silicon dioxide dielectric. A direct correlation was observed between the hydrophobicity of the silicon dioxide dielectric surface and the enhancement of the field‐effect mobilities. The highest mobilities for both polymers were measured on the OFET devices treated with heptadecafluoro‐1,1,2,2‐tetrahydro‐decyl‐1‐trimethoxysilane (FS) which generated the most hydrophobic surface. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Impact of Heterocycle Annulation on NIR Absorbance in Quinoid Thioacene Derivatives

The synthesis and characterisation of a homologous series of quinoid sulfur-containing imidazolyl-substituted heteroacenes is described. The optoelectronic and magnetic properties were investigated by UV/vis, fluorescence and EPR spectroscopy as well as quantum-chemical calculations, and were compared to those of the corresponding benzo congener. The room-temperature and atmospherically stable quinoids display strong absorption in the NIR region between 678 and 819 nm. The dithieno[3,2-b:2′,3′-d]thiophene and the thieno[2′,3′:4,5]thieno[3,2-b]thieno[2,3-d]thiophene derivatives were EPR active at room temperature. For the latter, variable-temperature EPR spectroscopy revealed the presence of a thermally accessible triplet state, with a singlet-triplet separation of 14.1 kJ mol⁻¹.     

Dithienobenzimidazole‐containing conjugated donor–acceptor polymers: Synthesis and characterization

The synthesis of two new conjugated polymers based on the relatively under‐exploited monomer, 5,8‐dibromo‐2‐[5‐(2‐hexyldecyl)‐2‐thienyl]‐1H‐dithieno[3,2‐e:2′,3′‐g]benzimidazole (dithienobenzimidazole, DTBI ), and either 4,7‐bis[4‐hexyl‐5‐(trimethylstannyl)‐2‐thienyl]‐2,1,3‐benzothiadiazole ( BTD ) or 2,6‐bis(trimethylstannyl)‐4,8‐bis(5‐(2‐ethylhexyl) thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene ( BDT ) is described. The polymers were synthesized via Stille polycondensation and characterized by traditional methods (¹H NMR, gel‐permeation chromatography, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, thermal gravimetric analysis, differential scanning calorimetry, ultraviolet–visible spectroscopy, photoluminescence, and cyclic voltammetry). Prior to their synthesis, trimer structures were modeled by DFT calculations facilitating a further understanding of the systems' electronic and geometric structure. Polymers were titrated with acid and base to take advantage of their amphiprotic imidazole moiety and their optical response monitored with ultraviolet–visible spectroscopy. Finally, pristine polymer thin‐films were treated with acid and base to evaluate (de)protonation's effect on system electronics, but thin‐film degradation was encountered. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 60–69     

Cyclocondensation of 3-amino-2-iminonaphtho[1,2-d]thiazole with oxalic acid derivatives

Refluxing 3-amino-2-iminonaphtho[1,2-d]thiazole ( 1 ) with diethyl oxalate ( 2a ) in a 2:1 molar ratio in dry pyridine provided 2,2′-binaphtho[1′,2′:4,5]thiazolo[3,2-b][1,2,4]triazole ( 3 ). On the other hand, when 1 was treated with excess amount of 2a in dimethylformamide, it afforded ethyl naphtho[1′,2′:4,5]thiazolo[3,2-b][1,2,4]triazole-2-carboxylate ( 4a ) on heating and ethyl N-(2-iminonaphtho[1,2-d]thiazol-3-yl)oxamate ( 5 ) by stirring at room temperature. Cyclization of 5 upon fusion led to the formation of 3-hydroxy-2H-naphtho-[1′,2′:4,5]thiazolo[3,2-b][1,2,4]triazin-2-one ( 6 ). Compound 6 could also be prepared directly from 1 by refluxing either with 2a neatly, in glacial acetic acid or with oxalic acid ( 2b ) in the same medium. The acid form of 4a might be obtained from 1 and 2b on heating in dimethylformamide, but it was decarboxylated to naphtho-[1′,2′:4,5]thiazolo[3,2-b][1,2,4]triazole ( 4b ) during the reaction.     

High‐performing random terpolymer‐based nonfullerene polymer solar cells fabricated using solvent additive‐free as‐cast blend films

Two new random terpolymers containing 4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene (BDT) as a donating unit, methyl‐3‐thiophenecarboxylate (3MT) as a weak accepting unit, and the more electron‐deficient benzo[c][1,2,5]thiadiazole (BTz) or 5,5′‐bis(2‐ethylhexyl)‐4H,4′H‐1,1′‐bithieno[3,4‐c]pyrrole‐4,4′,6,6′(5H,5′H)‐tetraone (BiTPD) unit as a third monomer (respectively yielding 3MTB and 3MTT ) were synthesized in order to achieve improved physical and optoelectronic properties relative to the 3MT‐Th copolymer bearing only BDT and 3MT. The UV–vis absorption spectra and optical bandgap energies of these terpolymers were broader and smaller than those of the 3MT‐Th copolymer. In thin films, the terpolymers displayed the face‐on polymer chain orientation, indicating that the BTz or BiTPD unit in the terpolymer backbones did not affect the molecular arrangement on the substrate. In comparison with 3MT‐Th ‐based polymer solar cells (PSCs) as control devices, the PSCs employing blend films of these terpolymers as the donor and 2,2′‐[[6,6,12,12‐Tetrakis(4‐hexylphenyl)‐6,12‐dihydrodithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐2,8‐diyl]bis[methylidyne(3‐oxo‐1H‐indene‐2,1(3H)‐diylidene)]]bis[propanedinitrile] (ITIC) as the acceptor exhibited higher power conversion efficiencies (>8.0%) for the same device configuration. In addition, the 3MTB‐ and 3MTT‐ based PSC devices displayed excellent shelf‐life even after aging for over 1000 h. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1528–1535     

Nitration of dithieno[3,2-b:3′,2′-d]pyridine and dithieno[3,2-b:3′,4′-d]pyridine

Nitration of dithieno[3,2-b:3′,2′-d]pyridine ( 4 ) and dithieno[3,2-b:3′,4′-d]pyridine ( 5 ) has been studied. Nitration of 4 occurred in both positions of the C ring, while 5 was predominantly substituted on the 3,4-fused ring. The structures of the nitro derivatives were proven by extensive use of ¹H and ¹³C nmr spectroscopy.     

Construction of new heteroacenes based on benzo[b]thieno[2,3-d]thiophene / quinoline or 1,8-naphthyridine systems using the Friedländer reaction

Two new classes of heteroacenes, namely benzo[4′,5′]thieno[2′,3′:4,5]thieno[3,2-b]quinolines and benzo[4′,5′]thieno[2′,3′:4,5]thieno[3,2-b][1,8]naphthyridines, have been formed using the Friedländer reaction to annulate the benzo[b]thieno[2,3-d]thiophene scaffold to quinoline or 1,8-naphthyridine fragments. In accordance with this synthetic strategy, benzo[b]thieno[2,3-d]thiophen-3(2H)-ones were treated with 2-aminobenzaldehydes or 2-aminonicotinaldehyde in the presence of pyrrolidine in glacial acetic acid at reflux to give the desired quinoline- or 1,8-naphthyridine-fused compounds, respectively. The optical and electrochemical properties of selected heteroacenes were determined.     

Pyromellitic diimide‐based copolymers for ambipolar field‐effect transistors: Synthesis,characterization, and device applications

A pyromellitic diimide building block, 2,6‐bis(2‐decyltetradecyl)?4,8‐di(thiophen‐2‐yl)pyrrolo[3,4‐f]isoindole‐1,3,5,7(2H,6H)‐tetraone ( 4 ), is synthesized. Based on this building block and other electron‐rich units such as 2,2′‐bithiophene, thieno[3,2‐b]thiophene and 4,8‐bis(dodecyloxy)benzo[1,2‐b:4,5‐b′]dithiophene, three conjugated polymers P1 , P2 , and P3 are prepared in good yield via Stille coupling polymerization. These new copolymers have good solubility in common organic solvents and exhibit good thermal stability. The optical, electrochemical, and thermal properties of these polymers P1–P3 are carefully investigated, and their applications in solution‐processed organic field‐effect transistors are also studied. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2454–2464     

Polycyclic N‐Heterocyclic Compounds. Part 81: Synthesis and Evaluation of Pentacyclic 1,2,4,5‐Tetrahydro[1]benzothieno[2′,3′:6,7]thiepino[4,5‐e]imidazo[1,2‐c]pyrimidine and Related Compounds as Potential Antiplatelet Aggregators

Dehydrative ring closure reactions were carried out on fused 4‐(2‐hydroxyethylamino) (or 2‐hydroxyethoxy or 2‐hydroxyethylthio)pyrimidines ( 2a , 2b , 2c ) to give fused 2,3‐dihydroimidazo[1,2‐c] (or 2,3‐dihydrooxazolo[3,2‐c] or 2,3‐dihydrothiazolo[3,2‐c])pyrimidines. This reaction produced the pentacyclic 1,2,4,5‐tetrahydro[1]benzothieno[2′,3′:6,7]thiepino[4,5‐e]imidazo[1,2‐c]pyrimidine ( 3a ) and 1,2,4,5‐tetrahydro[1]benzothieno[2′,3′:6,7]thiepino[4,5‐e]thiazolo[3,2‐c]pyrimidinium chloride ( 3c ) from the 2‐hydroxyethylamino‐derivative and 2‐hydroxyethylthio‐derivative, respectively. In contrast, 2‐hydroxyethoxy‐derivative ( 2b ) gave the rearrangement product, 3‐(2‐chloroethyl)‐5,6‐dihydro[1]benzothieno[3′,2′:2,3]thiepino[4,5‐d]pyrimidin‐4(3H)‐one ( 4 ). Effects of the synthesized compounds on collagen‐induced platelet aggregation were also evaluated.     

Synthesis and photovoltaic investigation of dithieno[2,3‐d:2′,3′‐d′]‐benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene‐based conjugated polymer with an enlarged π‐conjugated system

Compared with benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene (BTT), an extended π‐conjugation fused ring derivative, dithieno[2,3‐d:2′,3′‐d′]benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene (DTBTT) has been designed and synthesized successfully. For investigating the effect of extending conjugation, two wide‐bandgap (WBG) benzo[1,2‐b:4,5‐b′]dithiophene (BDT)‐based conjugated polymers (CPs), PBDT‐DTBTT, and PBDT‐BTT, which were coupled between alkylthienyl‐substituted benzo[1,2‐b:4,5‐b′]dithiophene bistin (BDT‐TSn) and the weaker electron‐deficient dibromides DTBTTBr₂ and BTTBr₂ bearing alkylacyl group, were prepared. The comparison result revealed that the extending of conjugated length and enlarging of conjugated planarity in DTBTT unit endowed the polymer with a wider and stronger absorption, more ordered molecular structure, more planar and larger molecular configuration, and thus higher hole mobility in spite of raised highest occupied molecular orbital (HOMO) energy level. The best photovoltaic devices exhibited that PBDT‐DTBTT/PC₇₁BM showed the power conversion efficiency (PCE) of 2.73% with an open‐circuit voltage (V_OC) of 0.82 V, short‐circuit current density (J_SC) of 6.29 mA cm^?2, and fill factor (FF) of 52.45%, whereas control PBDT‐BTT/PC₇₁BM exhibited a PCE of 1.98% under the same experimental conditions. The 38% enhanced PCE was mainly benefited from improved absorption, and enhanced hole mobility after the conjugated system was extended from BTT to DTBTT. Therefore, our results demonstrated that extending the π‐conjugated system of donor polymer backbone was an effective strategy of tuning optical electronic property and promoting the photovoltaic property in design of WBG donor materials.     

Synthesis,Reactions, and Antimicrobial Evaluation of Some Polycondensed Thienopyrimidine Derivatives

Some novel indeno[2,1-b]thiophenes, indeno[1′,2′:4,5]thieno[2,3-d][1,2,3]triazines, indeno[1′,2′:4,5]thieno[2,3-d]pyrimidines, indeno[1′,2′:4,5]thieno[2,3-d][1,3]thiazolo[3,2-a]pyrimidines, and indeno[1′,2′:4,5]thieno[2,3-d][1,2,4]triazolo[4,3-a]pyrimidines 2–16 were prepared starting with 2-aminoindeno[2,1-b]thiophene-3-carboxylic acid amide ( 1 ). Furthermore, the antimicrobial evaluation of the prepared products showed that many of them revealed promising antimicrobial activity.     

Thermolyzed products of naphth[1,2-d]imidazo[2,1-b]-thiazole-2,3-dione

Themolysis of naphth[1,2-d]imidazo[2,1-b]thiazole-2,3-dione ( 1 ) in dimethylformamide gave an intermediate 2-isocyanatonaphtho[1,2-d]thiazole ( 2 ), which underwent [4 + 4] cyclodimerization to yield dinaphtho-[1″,2″:4,5;1′″,2′″:4′,5′]dithiazolo[3,2-a:3′,2′-e]-1,3,5,7-tetrazocine-9,19-dione ( 3 ). The possible [4 + 2] cycloadduct, 3-(2-naphtho-[1,2-d]-thiazolyl)naphtho[1′,2′:4,5]thiazolo[3,2-a]-1,3,5-triazine-2,4-dione ( 4 ), an usual dimer type of heterocyclic isocyanates was not produced. Discrimination between the two isomers was established on the basis of spectral analyses.     

Polycyclic N-Heterocyclic Compounds,Part 77: Synthesis of [1]Benzothieno[3′,2′:2,3]oxepino[4,5-d]pyrimidines and Evaluation of Their Antiplatelet Aggregation Activity

Reaction of 3-(3-cyanopropoxy)[1]benzothiophene-2-carbonitrile with sodium hydride gave 5-amino-1,2-dihydro[1]benzothieno[3,2-d]furo[2,3-b]pyridine and 5-amino-2,3-dihydro[1]benzothieno[3,2-b]oxepin-4-carbonitrile. The latter compound served as a convenient scaffold for the synthesis of the new heterocycles [1]benzothieno[3′,2′:2,3]oxepino[4,5-d]pyrimidines and the parent 1,2,4,5-tetrahydro[1]benzothieno[2′,3′:6,7]oxepino[4,5-e]imidazo[1,2-c]pyrimidine heterocyclic system. The new compounds described in this report were evaluated as inhibitors of platelet aggregation in vitro.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Synthesis of novel pyrido[3′,2′:4,5]thieno[3,2‐d]pyrimidines,pyrido[3″,2″:4′,5′]thieno[3′,2′:4,5]pyrimido[l,6‐a]benzimidazoles and related fused systems

3‐Amino‐4‐aryl‐5‐ethoxycarbonyl‐6‐methylthieno[2,3‐b]pyridine‐2‐carboxamides 3a‐c were prepared from ethyl 4‐aryl‐3‐cyano‐6‐methyl‐2‐thioxo‐1,2‐dihydropyridine‐5‐carbonylates 1a‐c and reacted with some carbonyl compounds to give tetrahydropyridothienopyrimidine derivatives 6a‐c, 7a‐c and 8a‐c , respectively. Treatment of compound 3c with chloroacetyl chloride led to the formation of a next key compound, ethyl 2‐chloromethyl‐4‐oxo‐3,4‐dihydropyrido[3′,2′:4,5]thieno[3,2‐d]pyrimidine‐8‐carboxylate 9 . Also, 3‐amino‐2‐benzimidazolylthieno[2,3‐b]pyridine‐5‐carboxylate 5 and 2‐(3′‐aminothieno [2,3‐b]pyridin‐2′‐yl)‐4‐oxo‐3,4‐dihydropyrido[3′,2′:4,5]thieno[3,2‐d]pyrimidine‐8‐carboxylate 17 were prepared from 1c. The compounds 5, 9 and 17 were used as good synthons for other pyridothienopyrimidines and pyridothienopyrimidobenzimidazoles as well as for related fused polyheterocyclic systems.