A proposal for a novel evaluation method of the bending velocities of polymer actuators

This paper proposes a novel evaluation method for three types of velocities of the bending processes of polymer actuators. These velocities are the initial, bending, and backtracking velocities, and the method considers three processes of the bending motion. By calculating the time–width differentiation of the displacement of each process, the initial, bending, and backtracking velocities can be evaluated. Δt of 0.1, 1.0, and 10.0 s were considered to be the differentiations of bending displacement, and the initial, bending, and backtracking velocities were calculated to be 2.15, 0.46, and 0.002 mm/s, respectively. By using the method proposed here, we found that the initial velocity at 75%RH is 2.5 times faster than it was at 45%RH by increasing the adsorption of water. Copyright © 2013 John Wiley & Sons, Ltd.     

Temperature,humidity, and dimension dependence of the bending motion of ionomer‐based polymer actuators

This paper focuses on the effects of temperature, humidity, and dimensions on the displacement of ionomer‐based polymer actuators. The amount of displacement and velocities of the actuation strongly increased with increasing humidity and temperature. We attributed this behavior to a change in the Young's modulus (the stiffness) and ion conductivity based on water uptake. To evaluate the dependence of the velocity of the displacement on humidity and temperature, we examined three velocities (i.e. the initial, bending, and backtracking velocities). The observed increase in the bending velocity at higher relative humidity (RH) levels arises from an increase in the water uptake, which enhances ion conductivity and decreases the film stiffness. The ratio of the bending velocity to the backtracking velocity at higher RH decreased because of a drastic increase of the backtracking velocity at higher RH. This result would be explained by an increase in the ion conductivity accompanying a decrease in the stiffness. Furthermore, we compared the difference in the amount of displacement of the actuator using actuators of two widths (2 and 10 mm) at 30, 60, and 90% RH and at 25 °C. The difference in the width of the actuator did not completely affect the displacement. These results are reasonably explained by considering the amount of mobile ions per unit volume of the films of the actuators. Copyright © 2016 John Wiley & Sons, Ltd.     

The effects of the potential and polarization time on the performance of ionic polymer metal composite actuators: a control of forward and reverse displacements

This paper focuses on the dependence of various waveforms of the potential on the displacement of Nafion‐platinum based IPMC actuators at 40 and 90% relative humidity (RH). In comparison with simpler square waveforms, a waveform that is being composed by inclusion of a rest potential of 0 V has given a longer displacement. This benefit was effective at lower humidity conditions. By a polarization, the actuators show three major displacement processes of maximum forward displacement, steady forward displacement, and maximum reverse displacement. Here, the dependence of the potential and polarization time on these displacements has been carefully examined. An increase in the forward displacement by the potential does not strongly affect a slower reverse relaxation. To give a suitable relaxation period before a polarity switching of the potential seems effective to release the internal stress of the actuator. An elevated drive potential has decreased in the bending speed apparently. Finally, it has been noted that the ‘recovery’ of the maximum displacement is possible if a suitable waveform is applied to the actuator. This recovery effect is more remarkable at higher dive potential. Copyright © 2007 John Wiley & Sons, Ltd.     

Effects of d.c. potential patterns on the performance of ion‐exchange polymer based molecular actuators

The dynamic performance (i.e. displacement, current, velocity, and force) of ion‐exchange polymer based actuators (the Nafion?/platinum electrodes) have been examined by developing instrumentation. The CCD imaging technique was examined to evaluate the displacement under the various d.c. potential patterns. Two different d.c. potential patterns with or without a rest were applied to the electrodes at 0.1 Hz. It was better to take a rest at 0 V for the polarization back and forth between +2 and ?2 V to give lower current consumption and longer displacement. The actuator produced the force of ca. 0.95 g at 3.25 V in air. The result also demonstrated that higher overpotential has to be avoided to maintain the maximum force. The generative force is in inverse proportion to the length of the actuators. The dimension of the film strongly governs the force production and its performance. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis and characterization of polymer electrolytes based on cross‐linked phenoxy‐containing polyphosphazenes

A new method to prepare the polymer electrolytes for lithium‐ion batteries is proposed. The polymer electrolytes were prepared by reacting poly(phosphazene)s (MEEPP) having 2‐(2‐methoxyethoxy)ethoxy and 2‐(phenoxy)ethoxy units with 2,4,6‐tris[bis(methoxymethyl)amino]‐1,3,5‐triazine (CYMEL) as a cross‐linking agent. This method is simple and reliable for controlling the cross‐linking extent, thereby providing a straightforward way to produce a flexible polymer electrolyte membrane. The 6 mol % cross‐linked polymer electrolyte (ethylene oxide unit (EO)/Li = 24:1) exhibited a maximum ionic conductivity of 5.36 × 10^?5 S cm^?1 at 100 °C. The ⁷Li linewidths of solid‐state static NMR showed that the ionic conductivity was strongly related to polymer segment motion. Moreover, the electrochemical stability of the MEEPP polymer electrolytes increased with an increasing extent of cross‐linking, the highest oxidation voltage of which reached as high as 7.0 V. Moreover, phenoxy‐containing polyphosphazenes are very useful model polymers to study the relationship between the polymer flexibility; that is, the cross‐linking extent and the mobility of metal ions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 352–358     

Light modulation and coupling and rugby‐shaped resonators based on polymer fiber waveguide junctions

We report a systematic study of the dependence of the output efficiency and scattering efficiency on crossing angle, guided wavelength, and junction size in polymer nanofiber waveguide junctions. The junctions were assembled by using poly(trimethylene terephthalate) nanofibers (PNFs) with diameters of 200–800 nm under an optical microscope with the assistant of micromanipulators. A Chinese character and an SU pattern based the PNF junction technique have been demonstrated, moreover, the junction technique has also been expanded to various elastic substrates instead of glass substrate with high robustness. To further demonstrate the ability of modulating light of using the junction technique, we fabricated rugby‐shaped microresonators based on the polymer fiber junction, which exhibited high Q factor up to 10⁵. Furthermore, the microresonators can incorporate dyes or quantum dots into them, acting as active devices. We believe that the polymer fiber junction technique would provide a versatile platform for investigating light modulation or light matter interaction in various cavities with different configuration. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 833–840     

A one‐dimensional zinc(II) coordination polymer based on mixed multidentate N‐ and O‐donor ligands

In the title coordination polymer, catena‐poly[[bis[{1‐[(1H‐benzimidazol‐2‐yl‐κN³)methyl]‐1H‐tetrazole}zinc(II)]‐bis(μ₄‐pentane‐1,5‐dioato‐1:2:1′:2′κ⁴O¹:O^1′:O⁵:O^5′)] methanol disolvate], {[Zn(C₅H₆O₄)(C₉H₈N₆)]·CH₃OH}_n, each Zn^II ion is five‐coordinated by four O atoms from four glutarate ligands and by one N atom from a 1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole (bimt) ligand, leading to a slightly distorted square‐pyramidal coordination environment. Two Zn^II ions are linked by four bridging glutarate carboxylate groups to generate a dinuclear [Zn₂(CO₂)₄] paddle‐wheel unit. The dinuclear units are further connected into a one‐dimensional chain via the glutarate ligands. The bimt ligands coordinate to the Zn^II ions in a monodentate mode and are pendant on both sides of the main chain. In the crystal, the chains are linked by O—H...O and N—H...O hydrogen bonds into a two‐dimensional layered structure. Adjacent layers are further packed into a three‐dimensional network through van der Waals forces. A thermogravimetric analysis was carried out and the photoluminescent behaviour of the polymer was investigated.     

Preparation and utilization of poly(methacryloylsilatrane) as a salt‐dissociation enhancer in PEO‐based polymer electrolytes

Polymers containing silatrane units were prepared by the free radical polymerization of methacryloylsilatrane (MPS), and their conductivities were evaluated. We confirmed that MPS can be polymerized without excessive decomposition of the silatrane units by the radical polymerization initiated by azobisisobutyronitrile. The chemical structure of the polymerized MPS (pMPS) was characterized by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, gel permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectroscopy. The pMPS formed a homogeneous complex with lithium trifluoromethyl sulfonate (LiOTf), although the obtained pMPS/LiOTf complex did not show conductivity. The negligible conductivity was caused by the high glass transition temperature (T_g) of the pMPS matrix, which exceeded 70°C. The pMPS was subsequently utilized as a salt‐dissociation enhancer for the poly(ethylene oxide)‐based polymer electrolyte. MPS was copolymerized with poly[methacryloyl oligo(ethylene oxide)] (pMEO) by free radical polymerization. When the pMEO incorporated a small amount of MPS units (i.e. lower than 15 mol%), the elevation in T_g was not observed, and the conductivity markedly improved. Among the series of copolymers and when compared with pristine pMEO, the copolymer containing 6.3% of MPS units had the maximum conductivity (3.1 × 10^?4 S cm^?1 at 80°C). The Vogel–Fulcher–Tammann fitting parameters showed that the conductivity was improved by the increase in the number of carrier ions. The enhancement in salt dissociation was presumably due to the homogeneous incorporation of polar MPS units. However, when the MPS unit content exceeded 15 mol%, the conductivity was lowered because of the increase in T_g. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of an oligo(ethylene glycol)‐based third‐generation thermoresponsive dendronized polymer

An improved strategy to synthesize oligo(ethylene glycol)‐based secondary generation (G2) dendron is presented. The overall synthesis efficiency increased by 50% when comparing to the previous method, and the product purification by column chromatography becomes much easier. Based on this approach, the synthesis of the third‐generation (G3) dendrons and the corresponding methacrylate‐based G3 macromonomer becomes feasible. Because of the oil characteristics of this macromonomer, its polymerization was able to be conducted in bulk with AIBN as the initiator. The polymerization degree of the third‐generation dendronized polymer ( PG3 ) was found to be around 16 based on GPC measurement. The thermally induced dehydration processes of this polymer were monitored by temperature‐varied proton NMR spectroscopy, and its thermoresponsive behaviors were investigated with turbidity measurements using UV–vis spectroscopy. Similar to the lower generation counterparts, this threefold branched dendronized polymer also shows characteristic fast and sharp phase transitions around its apparent lower critical solution temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6630–6640, 2009     

Synthesis and properties of all solid polymer electrolytes based on poly(vinyl acetate‐co‐acetyl ethylene oxide acrylate)

Poly(acetyl ethylene oxide acrylate‐co‐vinyl acetate) (P(AEOA‐VAc)) was synthesized and used as a host for lithium perchlorate to prepare an all solid polymer electrolyte. Introduction of carbonyl groups into the copolymer increased ionic conductivity. All solid polymer electrolytes based on P(AEOA‐VAc) at 14.3 wt% VAc with 12wt% LiClO₄ showed conductivity as high as 1.2 × 10^?4 S cm^?1 at room temperature. The temperature dependence of the ionic conductivity followed the VTF behavior, indicating that the ion transport was related to segmental movement of the polymer. FTIR was used to investigate the effect of the carbonyl group on ionic conductivity. The interaction between the lithium salt and carbonyl groups accelerated the dissociation of the lithium salt and thus resulted in a maximum ionic conductivity at a salt concentration higher than pure PAEO‐salts system. Copyright © 2010 John Wiley & Sons, Ltd.     

Poly(dimethylsiloxane)‐based polymer organogelators with L‐lysine derivatives as a organogelation‐causing segment

New poly(dimethylsiloxane)‐based polymer organogelators with L ‐lysine derivatives were synthesized on the basis of synthetically simple procedure, and their organogelation abilities were investigated. These polymer organogelators have a good organogelation ability and form organogels in many organic solvents. In the organogels, polymer gelators constructed a mesoporous structure with a pore size of about 1 μm formed by entanglement of the self‐assembled nanofibers. The L ‐lysine derivatives in the polymer gelators functioned as a gelation‐causing segment and the organogelation was induced by self‐assembly of the L ‐lysine segments through a hydrogen bonding interaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3817–3824, 2006     

Synthesis and properties of mono‐ and di‐fluoro‐substituted 2,3‐didodecylquinoxaline‐based polymers for polymer solar cells

We synthesized two new alternating polymers, namely P(Tt‐FQx) and P(Tt‐DFQx) , incorporating electron rich tri‐thiophene and electron deficient 6‐fluoroquinoxaline or 6,7‐difluoroquinoxaline derivatives. Both polymers P(Tt‐FQx) and P(Tt‐DFQx) exhibited high thermal stabilities and the estimated 5% weight loss temperatures are 425 and 460 °C, respectively. Polymers P(Tt‐FQx) and P(Tt‐DFQx) displayed intense absorption band between 450 and 700 nm with an optical band gap (E_g) of 1.78 and 1.80 eV, respectively. The determined highest occupied/lowest unoccupied molecular orbital's (HOMO/LUMO) of P(Tt‐DFQx) (?5.48 eV/?3.68 eV) are slightly deeper than those of P(Tt‐FQx) ( ?5.32 eV/?3.54 eV). The polymer solar cells fabricated with a device structure of ITO/PEDOT:PSS/ P(Tt‐FQx) or P(Tt‐DFQx) :PC₇₀BM (1:1.5 wt %) + 3 vol % DIO/Al offered a maximum power conversion efficiency (PCE) of 3.65% with an open‐circuit voltage (V_oc) of 0.59 V, a short‐circuit current (J_sc) of 10.65 mA/cm² and fill factor (FF) of 59% for P(Tt‐FQx) ‐based device and a PCE of 4.36% with an V_oc of 0.69 V, a J_sc of 9.92 mA/cm², and FF of 63% for P(Tt‐DFQx) ‐based device. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 545–552     

Influence of Plasticizers on the Electromechanical Behavior of a P(VDF‐TrFE‐CTFE) Terpolymer: Toward a High Performance of Electrostrictive Blends

This work aims at providing a complete analysis of the effect of plasticizers on the electrostrictive terpolymer performance. To achieve this, several plasticizing agents such as 2‐ethylhexyl phtalate (DEHP), diisononyl phtalate (DINP), and palamoll 652 have been incorporated in the polymer matrix. Experimental results demonstrate that the proposed novel materials exhibited excellent electromechanical enhancement in terms of transverse strain and mechanical energy density under a moderate electric field, which is definitively critical in recent microscale actuation. Another objective of this article was to explore material characteristics as a function of the DINP content, and it was found that the plasticizer weigh fraction was the key parameter determining performance of the modified fluorinate terpolymer blends. Accordingly, it was revealed that high performance flexible actuators can be achieved merely by employing a simple and cheap plasticizer, thus making it possible to overcome the current technological barrier of conventional electroactive polymers that suffer from the high applied electric field usually required to reach sufficient strain. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 355–369     

A new two‐dimensional manganese(II) coordination polymer based on thiophene‐3,4‐dicarboxylic acid

A novel manganese coordination polymer, poly[(μ₅‐thiophene‐3,4‐dicarboxylato)manganese(II)], [Mn(C₆H₂O₄S)]_n, was synthesized hydrothermally using 3,4‐thiophenedicarboxylate (3,4‐tdc²⁻) as the organic linker. The asymmetric unit of the complex contains an Mn²⁺ cation and one half of a deprotonated 3,4‐tdc²⁻ anion, both residing on a twofold axis. Each Mn²⁺ centre is six‐coordinated by O atoms of bridging/chelating carboxylate groups from five 3,4‐tdc²⁻ anions, forming a slightly distorted octahedron. The Mn²⁺ centres are bridged by 3,4‐tdc²⁻ anions to give an infinite two‐dimensional layer which incorporates one‐dimensional Mn–O gridlike chains, and in which the 3,4‐tdc²⁻ anion adopts a novel hexadentate chelating and μ₅‐bridging coordination mode. The fully deprotonated 3,4‐tdc²⁻ anion exhibits unexpected efficiency as a ligand towards the Mn²⁺ centres, which it coordinates through all of its carboxylate O atoms to provide the novel coordination mode. The IR spectrum of the complex is also reported.     

Low band‐gap modulation of isoindigo‐based copolymers toward high open‐circuit voltage of polymer solar cells

Designing low band‐gap‐conjugated polymers coupled with low HOMO levels attracts great attention in the field of polymer solar cells (PSCs). By using donor–acceptor (D‐A) copolymerization strategy, we designed and synthesized a series of low band‐gap copolymers with deep HOMO levels via introducing an isoindigo (IID) acceptor unit in the copolymers with the donor unit of fluorene (F) (PIID‐F), carbazole (Cz) (PIID‐Cz), thiophene (Th) (PIID‐Th), dithiophene (DTh) (PIID‐DTh), or dithienosilole (DTS) (PIID‐DTS). The HOMO level of the copolymers, measured by electrochemical cyclic voltammetry, varies from ?5.3 eV to ?5.8 eV, depending on different donor units in the copolymers. However, the LUMO levels of all the copolymers are fixed at about ?3.6 eV, which is mainly determined by IID acceptor unit due to its strong electron‐withdrawing ability. The new results will provide an effect help in designing IID based molecular structures. Among the copolymers, PIID‐DTS has a low band gap of 1.58 eV and possesses a low‐lying HOMO energy level of ?5.33 eV. The PSCs based on PIID‐DTS as donor and PC₇₀BM as acceptor exhibited a high open‐circuit voltage (V_oc) of 0.93 V and a primary power conversion efficiency of 2.45%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3477–3485     

A two‐dimensional copper(II) coordination polymer based on 2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid

Single‐crystal X‐ray diffraction analysis of poly[bis(μ₂‐5‐carboxy‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ³N³,O⁴:O⁵)copper(II)], [Cu(C₈H₉N₂O₄)₂)]_n, indicates that one carboxylic acid group of the 2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PDI) ligand is deprotonated. The resulting H₂PDI⁻ anion, acting as a bridge, connects the Cu^II cations to form a two‐dimensional (4,4)‐connected layer. Adjacent layers are further linked through interlayer hydrogen‐bond interactions, resulting in a three‐dimensional supramolecular structure.     

Novel isoindigo‐based conjugated polyelectrolytes: Synthesis and fluorescence quenching behavior with water‐soluble poly(p‐phenylenevinylene)s

Two novel ID‐based water‐soluble conjugated polymers (+)‐PIDPV and (?)‐PIDPV were synthesized by Heck coupling reaction. These two polyelectrolytes are both consisted of isoindigo units and phenylenevinylene units. In the UV–vis absorption spectra, both (+)‐PIDPV and (?)‐PIDPV exhibit broad absorption bands that almost cover the whole visible region. Photophysical investigations reveal that the fluorescence of water‐soluble PPV can be efficiently quenched by oppositely charged PIDPV at a very low concentration. Cationic PPV shows an efficient quenching effect with Κ_SV = 1.01 × 10⁶ M^?1 in the presence of (?)‐PIDPV while the anionic PPV gives a lager quenching constant with Κ_SV = 1.71 × 10⁶ M^?1 in the presence of (+)‐PIDPV. Furthermore, the blend films of water‐soluble PPVs and oppositely charged PIDPV also exhibit excellent quenching effect. These properties suggest that (+)‐PIDPV and (?)‐PIDPV are promising materials in the application of ionic photoactive layer in the organic solar cells. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2223–2237     

Interpenetrating polymer network hydrogels based on silicone and poly(2‐methacryloyloxyethyl phosphorylcholine)

In the present work, sequential interpenetrating polymer networks (IPNs) based on silicone and poly(2‐methacryloyloxyethyl phosphorylcholine) (PMPC) were developed with improved protein resistance. The structure and morphology of the IPNs were characterized by Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The results showed that the IPNs exhibited heterogeneous morphology. The bulk properties such as water content, ion permeability, and mechanical strength of the IPNs were determined by gravimetric method, ionoflux measurement technique, and tensile tester, respectively. The surface characteristics of the IPNs were investigated by X‐ray photoelectron spectroscopy (XPS) and contact angle measurements. XPS analysis suggested that PMPC was present on the surface as well as in the bulk material. The IPNs possessed more hydrophilic surface than pristine silicone revealed by contact angle measurements. Bovine serum albumin (BSA) was used as a model protein to evaluate protein resistance by a bicinchoninic acid assay method. The result revealed that the protein adsorption on the IPNs was significantly reduced compared to pristine silicone. These results suggest that the IPNs based on silicone and PMPC may be developed as novel ophthalmic biomaterials. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and ion conductivities of the plasticized polymer electrolytes based on the poly(acrylonitrile‐ co‐lithium methacrylate)

The polymer electrolytes composed of poly(acrylonitrile‐co‐lithium methacrylate) [P(AN‐co‐LiMA)], ethylene carbonate (EC), and LiClO₄ salts have been prepared. The ion groups in the P(AN‐co‐LiMA) were found to prevent EC from crystallization through their ion–dipole interactions with the polar groups in the EC. This suppression of the EC crystallization could lead to the enhancement of the ion conductivity at subambient temperature. The polymer electrolytes based on the PAN ionomer with 4 mol % ion content exhibited ion conductivities of 2.4 × 10⁻⁴ S/cm at −10°C and 1.9 × 10⁻³ S/cm at 25°C by simply using EC as a plasticizer. In the polymer electrolytes based on the PAN ionomer, ion motions seemed to be coupled with the segmental motions of the polymer chain due to the presence of the ion–dipole interaction between the ion groups in the ionomer and the polar groups in the EC, while the ion transport in the PAN‐based polymer electrolytes was similar to that of the liquid electrolytes. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 247–252, 1999     

Synthesis and surfactochromicity of 1,4‐diketopyrrolo[3,4‐c]pyrrole(DPP)‐based anionic conjugated polyelectrolytes

Two novel anionic conjugated copolyelectrolytes PSDPPPV and PSDPPPE were synthesized via Heck/Sonogashira coupling reactions and characterized by FT‐IR, ¹H NMR, UV‐vis, and PL spectroscopy. The two polymers are respectively constituted of 2,5‐diethoxy‐1,4‐phenyleneethynylene (DPV) and 2,5‐diethoxy‐1,4‐phenyleneethynylene (DPE) with 1,4‐diketo‐2,5‐bis(4‐sulfonylbutyl)‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (SDPP) which is a novel water soluble diketopyrrolopyrrole derivative. PSDPPPV and PSDPPPE show broad absorption band in visible region and they exhibit strong fluorescence quenching in aqueous solution. The fluorescence of their aqueous solutions can be enhanced in the presence of cationic surfactant or polymer nonionic surfactant. Fluorescence enhancement by introduction of polyvinylpyrrolidone (PVP) shows linear response. This result provides a controllable method to increase fluorescence intensity of dipyrrolopyrrole‐based conjugate polyelectrolytes in aqueous phase. The optical properties suggested that PSDPPPV and PSDPPPE which are negatively charged conjugated polymers can assemble with positively charged photovoltaic materials to form ionic photoactive layer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 739–751