HOMO Stabilisation in π‐Extended Dibenzotetrathiafulvalene Derivatives for Their Application in Organic Field‐Effect Transistors

Three new organic semiconductors, in which either two methoxy units are directly linked to a dibenzotetrathiafulvalene (DB‐TTF) central core and a 2,1,3‐chalcogendiazole is fused on the one side, or four methoxy groups are linked to the DB‐TTF, have been synthesised as active materials for organic field‐effect transistors (OFETs). Their electrochemical behaviour, electronic absorption and fluorescence emission as well as photoinduced intramolecular charge transfer were studied. The electron‐withdrawing 2,1,3‐chalcogendiazole unit significantly affects the electronic properties of these semiconductors, lowering both the HOMO and LUMO energy levels and hence increasing the stability of the semiconducting material. The solution‐processed single‐crystal transistors exhibit high performance with a hole mobility up to 0.04 cm² V^?1 s^?1 as well as good ambient stability.     

Solution‐Processable Balanced Ambipolar Field‐Effect Transistors Based on Carbonyl‐Regulated Copolymers

It is very important to develop ambipolar field effect transistors to construct complementary circuits. To obtain balanced hole‐ and electron‐transport properties, one of the key issues is to regulate the energy levels of the frontier orbitals of the semiconductor materials by structural tailoring, so that they match well with the electrode Fermi levels. Five conjugated copolymers were synthesized and exhibited low LUMO energy levels and narrow bandgaps on account of the strong electron‐withdrawing effect of the carbonyl groups. Polymer thin film transistors were prepared by using a solution method and exhibited high and balanced hole and electron mobility of up to 0.46 cm² V^?1 s^?1, which suggested that these copolymers are promising ambipolar semiconductor materials.     

Well-Balanced Ambipolar Charge Transport of Diketopyrrolepyrrole-Based Copolymers: Organic Field-Effect Transistors and High-Voltage Logic Applications

A poly (3,6-bis(thiophen-2-yl)−2,5-bis(2-decyltetradecyl)−2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione-co-(2,3-bis(phenyl)acrylonitrile)) (PDPADPP) copolymer, composed of diketopyrrolopyrrole (DPP) and a cyano (nitrile) group with a vinylene spacer linking two benzene rings, is synthesized via a palladium-catalyzed Suzuki coupling reaction. The electrical performance of PDPADPP in organic field-effect transistors (OFETs) and circuits is investigated. The OFETs based on PDPADPP exhibit typical ambipolar transport characteristics, with the as-cast OFETs demonstrating low field-effect hole and electron mobility values of 0.016 and 0.004 cm² V⁻¹ s⁻¹, respectively. However, after thermal annealing at 240 °C, the OFETs exhibit improved transport characteristics with highly balanced ambipolar transport, showing average hole and electron mobility values of 0.065 and 0.116 cm² V⁻¹ s⁻¹, respectively. To verify the application of the PDPADPP OFETs in high-voltage logic circuits, compact modeling using the industry-standard small-signal Berkeley short-channel IGFET model (BSIM) is performed, and the logic application characteristics are evaluated. The circuit simulation results demonstrate excellent logic application performance of the PDPADPP-based ambipolar transistor and illustrate that the device annealed at 240 °C exhibits ideal circuit characteristics.     

Synthesis and electronic energy‐level regulation of imide‐fused poly(thienylene vinylene) derivatives

A series of novel poly(thienylene vinylene) derivatives (PTVs), P20‐P24 , with imide substituents were designed and synthesized by palladium‐catalyzed Stille coupling polymerization, wherein the imide substituent density was decreased gradually, which allowed us to explicitly study the effect of electron‐deficient substituent on the optical, electrochemical, and photovoltaic properties of the PTVs. All of the four polymers showed broad absorption bands with optical bandgaps between1.66 and 1.78 eV. By reducing density of electron‐deficient imide group, the LUMO energy levels of the polymers could be tuned gradually from ?3.75 to ?3.43 eV, with HOMO levels upshifted from ?5.64 to ?5.16 eV. Bulk heterojunction solar cells with the polymers as donor and PC₇₁BM as acceptor demonstrated very different excitons dissociation behavior. With decreasing the imide‐fused unit density, the open‐circuit voltage (V_OC) values in the devices decreased from 0.78 to 0.62 V, whereas the short‐circuit currents (J_SC) increased from 0 to 2.26 mA cm^?2 and then decreased to 1.01 mA cm^?2. By adjusting the electron‐withdrawing imide substituent density, power conversion efficiency of the PTVs‐based solar cells can be increased to four times, reached 0.86%. To the best of our knowledge, this is the first systematic study of the relationship between molecular energy level and photovoltaic properties of PTVs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4975–4982     

Extended Conjugated Donor–Acceptor Molecules with E‐(1,2‐Difluorovinyl) and Diketopyrrolopyrrole (DPP) Moieties toward High‐Performance Ambipolar Organic Semiconductors

Two diketopyrrolopyrrole (DPP)‐based donor–acceptor (D–A) conjugated molecules, DPP‐F and DPP‐2F, which contain E‐(1,2‐difluorovinyl) moieties, are reported. The LUMO energies of DPP‐F and DPP‐2F were estimated to be ?3.49 and ?3.70 eV, respectively, based on their redox potentials and absorption spectral data; these values were clearly lowered because of the incorporation of electron‐withdrawing E‐(1,2‐difluorovinyl) moieties. Organic field‐effect transistors (OFETs) with thin films of DPP‐F and DPP‐2F were successfully fabricated with conventional techniques. Based on the respective transfer and output characteristics measured in an inert atmosphere, thin films of DPP‐2F display ambipolar semiconducting behavior with hole and electron mobilities reaching 0.42 and 0.80 cm² V^?1 s^?1, respectively. The as‐prepared OFET of DPP‐2F already shows high hole and electron mobilities that are not influenced remarkably by thermal annealing. For thin films of DPP‐F, only p‐type semiconducting behavior was observed in both an inert atmosphere and air, and the hole mobility increased to 0.1 cm² V^?1 s^?1 after thermal annealing. XRD and AFM studies were performed with thin films of DPP‐F and DPP‐2F after annealing at different temperatures.     

Functionalization of Hexa‐peri‐hexabenzocoronenes: Investigation of the Substituent Effects on a Superbenzene

We have demonstrated that the iridium‐catalyzed direct borylation of hexa‐peri‐hexabenzocoronene (HBC) enables regioselective introduction of boryl groups to the para‐, ortho‐, and meta‐substituted HBCs in high yields. The boryl groups have been transformed into various functionalities such as hydroxy, cyano, ethynyl, and amino groups. We have elucidated that the substituents significantly influence the photophysical properties of HBCs to enhance fluorescence quantum yields. DFT calculations revealed that the origin of the substituent effect is the lift in degeneracy in the frontier orbitals by an interaction with electron‐donating and electron‐withdrawing substituents at the para‐ and ortho‐positions. The change in molecular orbitals results in an increase of the transition probability from the S₀→S₁ states. In addition, the two‐photon absorption cross‐section values of para‐substituted HBCs are significantly larger than those of ortho‐ and meta‐substituted HBCs.     

Cyclometalated Pt complex based random terpolymers as electron acceptors for all polymer solar cells

Various molar ratios of platinum complexes were introduced into the conjugated backbone of the well‐studied poly[[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)](PNDIT2) acceptor polymer through random terpolymer approach. Terpolymers PNDIT2Ptx (x = 1, 2 and 5) exhibited slightly higher melting point (T_m), crystallization temperature, HOMO and LUMO energy levels than the control PNDIT2 copolymer due to the introduction of small amount of weaker electron‐withdrawing bulky rigid Pt complex instead of strong electron‐withdrawing flexible naphthalene diimide. When blended them with poly[[2,6′‐4,8‐di(5‐ethylhexylthienyl)benzo[1,2‐b;3,3‐b] dithiophene] [3‐fluoro‐2[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]] (PTB7‐Th) in all polymer solar cells, enhanced power conversion efficiency of 4.51% (3.74%) was obtained in terpolymer PNDIT2Pt1 based device compared to 3.88% (3.24%) of the control PNDIT2 at the same inverted (conventional) device conditions. The enhancement was probably ascribed to higher hole and electron transport ability and more efficient charge separation. To the best of our knowledge, this is the first example of random terpolymer acceptors based on heavy metal complexes. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 105–115     

Density functional theory study on electron and hole transport properties of organic pentacene derivatives with electron-withdrawing substituent

Attaching electron-withdrawing substituent to organic conjugated molecules is considered as an effective method to produce n-type and ambipolar transport materials. In this work, we use density functional theory calculations to investigate the electron and hole transport properties of pentacene (PENT) derivatives after substituent and simulate the angular resolution anisotropic mobility for both electron and hole transport. Our results show that adding electron-withdrawing substituents can lower the energy level of lowest unoccupied molecular orbital (LUMO) and increase electron affinity, which are beneficial to the electron injection and ambient stability of the material. Also the LUMO electronic couplings for electron transport in these pentacene derivatives can achieve up to a hundred meV which promises good electron transport mobility, although adding electron-withdrawing groups will introduce the increase of electron transfer reorganization energy. The final results of our angular resolution anisotropic mobility simulations show that the electron mobility of these pentacene derivatives can get to several cm(2) V(-1) s(-1), but it is important to control the orientation of the organic material relative to the device channel to obtain the highest electron mobility. Our investigation provide detailed information to assist in the design of n-type and ambipolar organic electronic materials with high mobility performance.     

Selenophene‐Flanked Diketopyrrolopyrrole Based Conjugated Polymers for Ambipolar Field‐Effect Transistors

The development of selenophene‐flanked DPP (SeDPP) based copolymers, especially for the ambipolar ones, lags behind other aromatic group flanked DPP‐based polymers. Herein, we report two new ambipolar SeDPP‐based conjugated polymers. One is the alternating polymer PSeDPPFT with normal SeDPP and 3,4‐difluorothiophene units. The other is PSeFDFT , in which the electron acceptor unit is replaced by a new SeDPP derivative, referred as to half‐fused SeDPP. The more planar structure of half‐fused SeDPP endows the backbone of PSeFDFT with good rigidity and planarity. Both polymers exhibit ambipolar transporting properties in air. The PSeFDFT based field‐effect transistors (FETs) display higher and more balanced ambipolar properties with μ_h^ave of 0.27 cm²·V^–1·s^–1, μ_e^ave of 0.18 cm²·V^–1·s^–1, and μ_h^ave/μ_e^ave of 1.5 than those of PSeDPPFT (μ_h^ave = 0.11 cm²·V^–1·s^–1, μ_e^ave = 0.042 cm²·V^–1·s^–1, and μ_h/μ_e = 2.6). This is attributed to the more planar structure, lower LUMO level, higher HOMO level, and better interchain packing orientations of PSeFDFT by comparing with PSeDPPFT . Therefore, a new molecular design strategy to modulate the hole and electron transporting properties is proposed for conjugated D‐A polymers.     

Theoretical Studies on the Electronic Structures and Optical Properties of Tri-aryl End-capped Terthiophene Derivatives

The relationships between electronic structures and spectra properties are investigated by DFT/TDDFT for terthiophene derivatives, BMA‐3T (tri‐aryl amine end‐capped terthiophene), BBA‐3T (tri‐aryl amine and tri‐aryl boron end‐capped terthiophene) and BPB‐3T (tri‐aryl boron end‐capped terthiophene). The calculated results show that BMA‐3T, BBA‐3T and BPB‐3T have higher HOMO energy level and lower ionization potentials (IPs) than 3T. BMA‐3T has good hole injection ability and hole‐transport property as reported in experiment. The designed molecule of BBA‐3T and BPB‐3T own lower LUMO level and higher electron affinities (EAs) than BMA‐3T, which facilitate electron injection and improve their electron‐transport properties. Surprisingly, BPB‐3T has preferable charge equilibrium property since its hole reorganization energy (λ_h) is close to electron reorganization energy (λ_e). The ΔE (HOMO−LUMO) and E_g of these three derivatives are narrower compared to 3T, and the absorption as well as emission spectrum exhibited red‐shifts.     

Asymmetric anionic polymerizations of 7‐(o‐substituted phenyl)‐2,6‐dimethyl‐1,4‐benzoquinone methides: Electrostatic interaction and steric,inductive, and resonance effects of the ortho‐substituent on the optical activity

7‐(o‐Substituted phenyl)‐2,6‐dimethyl‐1,4‐benzoquinone methides which have an electron‐donating methoxy‐(o‐OMe, 2a ) and methyl‐ (o‐Me, 2b ) substituents or an electron‐withdrawing cyano‐ (o‐CN, 2c ) and trifluoromethyl‐ (o‐CF₃, 2d ) substituents at the ortho‐position of the aromatic ring and 7‐(m‐substituted phenyl)‐2,6‐dimethyl‐1,4‐benzoquinone methide with an electron‐withdrawing trifluoromethyl‐ (m‐CF₃, 2e ) substituent at the meta‐position of the aromatic ring were synthesized, and their asymmetric anionic polymerizations using the complex of lithium 4‐isopropylphenoxide with (?)‐sparteine were carried out in toluene at 0 °C. The polymers with negative optical activity were obtained for all of five monomers, and their specific rotation values largely changed depending upon the substituents of the monomers. On the basis of the comparison of various substituents effects, it was found that the specific rotation of obtained polymers is significantly affected by the electronic effects such as inductive and resonance effects rather than the steric and electrostatic effects of the substituent. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1048–1058     

Solution‐Processable n‐Type Semiconductors Based on Unsymmetrical Naphthalene Imides: Synthesis,Characterization, and Applications in Field‐Effect Transistors

A series of unsymmetrical naphthalene imide derivatives ( 1a , 1b , 2 , 3 , 4 , 5 ) with high electron affinity was synthesized and used in n‐channel organic field‐effect transistors (OFETs). They have very good solubility in common organic solvents and good thermal stability up to 320 °C. Their photophysical, electrochemical, and thermal properties were investigated in detail. They showed low‐lying LUMO energy levels from ?3.90 to ?4.15 eV owing to a strong electron‐withdrawing character. Solution‐processed thin‐film OFETs based on 1a , 1b , 2 , 3 , 4 were measured in both N₂ and air. They all showed n‐type FET behavior. The liquid‐crystalline compounds 1a , 1b , and 3 showed good performance owing to the self‐healing properties of the film in the liquid‐crystal phase. Compound 3 has an electron mobility of up to 0.016 cm² V^?1 s^?1 and current on/off ratios of 10⁴–10⁵.     

Colorless to Purple–Red Switching Electrochromic Anthraquinone Imides with Broad Visible/Near‐IR Absorptions in the Radical Anion State: Simulation‐Aided Molecular Design

The large redshift of near‐infrared (NIR) absorptions of nitro‐substituted anthraquinone imide (Nitro‐AQI) radical anions, relative to other AQI derivatives, is rationalized based on quantum chemical calculations. Calculations reveal that the delocalization effects of electronegative substitution in the radical anion states is dramatically enhanced, thus leading to a significant decrease in the HOMO–LUMO band gap in the radical anion states. Based on this understanding, an AQI derivative with an even stronger electron‐withdrawing dicyanovinyl (di‐CN) substituent was designed and prepared. The resulting molecule, di‐CN‐AQI, displays no absorption in the Vis/NIR region in the neutral state, but absorbs intensively in the range of λ=700–1000 (λ_max≈860 nm) and λ=1100–1800 nm (λ_max≈1400 nm) upon one‐electron reduction; this is accompanied by a transition from a highly transmissive colorless solution to one that is purple–red. The relationship between calculated radical anionic HOMO–LUMO gaps and the electron‐withdrawing capacity of the substituents is also determined by employing Hammett parameter, which could serve as a theoretical tool for further molecular design.     

Random terpolymers for electroluminescent devices: Synthesis and characterization of new cyano‐containing poly(fluorenylene‐vinylene)s

The synthesis of new random poly(2,7‐fluorenylene‐vinylene)s was achieved by a Suzuki–Heck cascade polymerization reaction. The poly(fluorenylene‐vinylene) base structure was modified by the regio‐random incorporation of 1‐cyano‐2,5‐phenylene as electron withdrawing unit ( CN‐PFV1 ) and its properties were compared with terpolymers also embodying 1,4‐dioctyloxy‐2,5‐phenylene ( CN‐PFV2 ) or 3,6‐N‐octylcarbazole ( CN‐PFV3 ) as electron‐donating moieties. Thermal analysis revealed a high thermal stability (T_d > 389 °C) and the absence of glass transitions for all polymers. Cyclic voltammetry indicated a high electron affinity of the materials (2.96–3.21 eV) attributed to the presence of the cyano‐containing comonomer. In dilute solutions, the copolymers showed a broad green fluorescence with quantum yields ranging from 0.42 to 0.79, while in the solid state, a relatively narrow emission centered at ～ 560 nm, governed by the low‐energy segments within the π‐conjugated backbone, was observed. The electroluminescence properties of the materials were tested in OLED devices of ITO/PEDOT‐PSS/ CN‐PFV1‐3 /Ca/Al or ITO/PEDOT‐PSS/ CN‐PFV1‐3 /Alq₃/Ca/Al configurations, showing a bright green‐yellow emission that, in the case of CN‐PFV2 , reached 1403 cd/m² with efficiencies as high as 0.13 cd/A. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6051–6063, 2008     

Synthesis and applications of cyano‐vinylene‐based polymers containing cyclopentadithiophene and dithienosilole units for photovoltaic cells

Two β‐cyano‐thiophenevinylene‐based polymers containing cyclopentadithiophene ( CPDT‐CN ) and dithienosilole ( DTS‐CN ) units were synthesized via Stille coupling reaction with Pd(PPh₃)₄ as a catalyst. The effects of the bridged atoms (C and Si) and cyano‐vinylene groups on their thermal, optical, electrochemical, charge transporting, and photovoltaic properties were investigated. Both polymers possessed the highest occupied molecular orbital (HOMO) levels of about ?5.30 eV and the lowest unoccupied molecular orbital (LUMO) levels of about ?3.60 eV, and covered broad absorption ranges with narrow optical band gaps (ca. 1.6 eV). The bulk heterojunction polymer solar cell (PSC) devices containing an active layer of electron‐donor polymers ( CPDT‐CN and DTS‐CN ) blended with an electron‐acceptor, that is, [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) or [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM), in different weight ratios were explored under 100 mW/cm² of AM 1.5 white‐light illumination. The PSC device based on DTS‐CN: PC₇₁BM (1:2 w/w) exhibited a best power conversion efficiency (PCE) value of 2.25% with V_oc = 0.74 V, J_sc = 8.39 mA/cm², and FF = 0.36. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Photodriven Multi‐electron Storage in Disubstituted RuII Dppz Analogues

Four derivatives of the laminate acceptor ligand dipyrido‐[3,2‐a:2′,3′‐c]phenazine (dppz) and their corresponding ruthenium complexes, [Ru(phen)₂(dppzX₂)]²⁺, were prepared and characterized by NMR spectroscopy, ESI‐MS, and elemental analysis. The new ligands, generically denoted dppzX₂, were symmetrically disubstituted on the distal benzene ring to give 10,13‐dibromodppz (dppz‐p‐Br), 11,12‐dibromodppz (dppz‐o‐Br), 10,13‐dicyanodppz (dppz‐p‐CN), 11,12‐dicyanodppz (dppz‐o‐CN). Solvated ground state MO calculations of the ruthenium complexes reveal that these electron‐withdrawing substituents not only lower the LUMO of the dppz ligand (dppz(CN)₂<dppzBr₂<dppz), but that the para disubstitution results in a lower LUMO than the ortho disubstitution (dppz‐p‐CN<(dppz‐o‐CN), and dppz‐p‐Br<dppz‐o‐Br). The validity of the calculations was confirmed experimentally using cyclic voltammetry. Of the complexes evaluated in this study, only the dicyanodppz complexes showed multiple dppz‐based reductions prior to reduction of the phen ligands. The capacity to form singly and doubly reduced dppz‐based anions at modest reduction potentials was confirmed using a combination of spectroelectrochemical and chemical titration methods. When subjected to photolysis with visible light in the presence of a sacrificial donor, such as triethylamine, both cyano complexes showed multi‐electron reduction. The other complexes only show a single reduction.     

Poly(triphenylamine)s derived from oxidative coupling reaction: Substituent effects on the polymerization,electrochemical, and electro‐optical properties

A series of triphenylamine‐based polymers containing electron‐donating methoxy (? OCH₃) and electron‐withdrawing cyano or nitro (? CN or ? NO₂) substituents in the main chains have been designed and investigated. These conjugated polymers ( P1 – P3 ) could be readily prepared by oxidative coupling polymerization from monomers ( M1 – M3 ) using FeCl₃ as an oxidant. The P2 and P3 exhibited moderate high T_g values (203–205 °C) and thermal stability. These polymers in NMP solution showed UV–vis absorption around 288–404 nm and photoluminescence peaks around 435–492 nm. P1 – P3 showed reversible oxidation redox couples at E_onset = 0.67, 0.99, and 1.00 V in solution of 0.1 M tetrabutylammonium perchlorate (TBAP)/acetonitrile (CH₃CN), respectively. M3 and P3 exhibited reversible reduction redox couples at E_onset = ?1.04 and ?1.03 V. These polymers also revealed electrochromic characteristic changing color at different potential. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 285–294, 2009     

Theoretical Investigation into Electronic Structures and Charge Transfer Properties of π‐Conjugated System with Different Combinations of Thiophene and Vinyl/Butadiene

A series of combinations of thiophene and vinyl/butadiene were investigated by ab initio and DFT methods to explore their electronic structures and charge transfer properties. The results show that increasing thiophene ring and vinyl number is a rational strategy to raise the HOMO energy levels and lower the LUMO energy levels. Moving the vinyl from the periphery to the core has the slight effect on the HOMO and LUMO energy levels. Furthermore, replacing the middle vinyl and end‐capped vinyl of 3b (T5V4) with the butadiene can lower LUMO energy levels and then facilitate the electron injection. Above all, the close hole and electron reorganization energies (λ_h and λ_e) are observed from these compounds. However, the λ_es are smaller than their respective λ_hs in some compounds, which is relatively rare in organic materials. Especially, the promising ambipolar material 3c (T5B4) is recommended theoretically for possessing the equivalent minimum λ_h (0.24 eV) and λ_e (0.24 eV). The absorption wavelengths exhibit red shifts with the increasing of the thiophene ring and the vinyl number under the same configuration, which correspond to the reverse order of ΔE_H‐L and E_g. The linear relationships are found between experimental lowest singlet excited energies (E_exp) with theoretical values ΔE_H‐L and E_g.     

Diketopyrrolopyrrole‐Porphyrin Based Conjugated Polymers for Ambipolar Field‐Effect Transistors

Porphyrin‐based molecules have been widely used in dye‐sensitized solar cells and bulk heterojunction solar cells, but their application in field‐effect transistors (FETs) is limited. In this work, two conjugated polymers based on diketopyrrolopyrrole and porphyrin units were developed for FETs. The polymers exhibit extra‐low band gap with energy levels close to −4.0 eV and −5.0 eV due to the strong electron‐donating and withdrawing ability of porphyrin and diketopyrrolopyrrole. With additionally high crystalline properties, ambipolar charge carrier transports with a hole mobility of 0.1 cm² V⁻¹ s⁻¹ in FETs were realized in these polymers, representing the highest performance in solution‐processed FETs based on porphyrin unit.     

Perylene diimide copolymers with dithienothiophene and dithienopyrrole: Use in n‐channel and ambipolar field‐effect transistors

Solution‐processable polymers consisting of perylene diimide (PDI) acceptor moieties alternating with dithienothiophene (DTT), N‐dodecyl‐dithienopyrrole (DTP), or oligomers of these donor groups have been synthesized. We have, in addition to varying the donor, varied the N,N′ substituents of the PDIs. The thermal, optical, electrochemical, and charge‐transport properties of the polymers have been investigated. The polymers show broad absorption extending from 300 to 1000 nm with optical band gaps as low as 1.2 eV; the band gap decreases with increasing the conjugation length of donor block, or by replacement of DTT by DTP. The electron affinities of the polymers, estimated from electrochemical data, range from ?3.87 to ?4.01 eV and are slightly affected by the specific choice of donor moiety, while the estimated ionization potentials (?5.31 to ?5.92 eV) are more sensitive to the choice of donor. Bottom‐gate top‐contact organic field‐effect transistors based on the polymers generally exhibit n‐channel behavior with electron mobilities as high as 1.7 × 10^–2 cm²/V/s and on/off ratios as high as 10⁶; one PDI‐DTP polymer is an ambipolar transport material with electron mobility of 4 × 10^–4 cm²/V/s and hole mobility of 4 × 10^–5 cm²/V/s in air. There is considerable variation in the charge transport properties of the polymers with the chemical structures. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013