A Potential Carcinogenic Pyrene Derivative under Förster Resonance Energy Transfer to Various Energy Acceptors in Nanoscopic Environments

Picosecond‐resolved Förster resonance energy transfer (FRET) from various vibronic bands in benzo[a]pyrene (BP) shows a strong dependency on the spectral overlap of an energy acceptor in a confined environment. Our study on the dipolar interactions between BP and different acceptors, including ethidium (Et), acridine orange (AO), and crystal violet (CV), at the surface of a model anionic micelle revealed that the Förster distance (R₀) and the rate of energy transfer is dependent on the individual spectral overlap of the vibronic bands of BP with the absorption spectra of the different energy acceptors. The differential behavior of the vibronic bands is compared with that of different dyes [quantum dots (QDs)] in a “dye‐blend” (mixture) under FRET to an energy acceptor. Comparison of the FRET of the QDs with that of BP confirmed the independent nature of the dipolar interaction of the vibronic bands with other organic molecules, and the use of deconvolution techniques in the interpretation of the donor–acceptor (D –A) distance was also justified. We also showed that the consideration of differential FRET from the vibronic bands of BP and from the QDs in the dye‐blend is equally acceptable in theoretical frameworks including the Infelta–Tachiya model and D –A distribution analysis in nanoenvironments.     

High‐Performance Förster Resonance Energy Transfer (FRET)‐Based Dye‐Sensitized Solar Cells: Rational Design of Quantum Dots for Wide Solar‐Spectrum Utilization

High‐performance Förster resonance energy transfer (FRET)‐based dye‐sensitized solar cells (DSSCs) have been successfully fabricated through the optimized design of a CdSe/CdS quantum‐dot (QD) donor and a dye acceptor. This simple approach enables quantum dots and dyes to simultaneously utilize the wide solar spectrum, thereby resulting in high conversion efficiency over a wide wavelength range. In addition, major parameters that affect the FRET interaction between donor and acceptor have been investigated including the fluorescent emission spectrum of QD, and the content of deposited QDs into the TiO₂ matrix. By judicious control of these parameters, the FRET interaction can be readily optimized for high photovoltaic performance. In addition, the as‐synthesized water‐soluble quantum dots were highly dispersed in a nanoporous TiO₂ matrix, thereby resulting in excellent contact between donors and acceptors. Importantly, high‐performance FRET‐based DSSCs can be prepared without any infrared (IR) dye synthetic procedures. This novel strategy offers great potential for applications of dye‐sensitized solar cells.     

Phosphorescence Energy Transfer: Ambient Afterglow Fluorescence from Water‐Processable and Purely Organic Dyes via Delayed Sensitization

Ambient afterglow luminescence from metal‐free organic chromophores would provide a promising alternative to the well‐explored inorganic phosphors. However, the realization of air‐stable and solution‐processable organic afterglow systems with long‐lived triplet or singlet states remains a formidable challenge. In the present study, a delayed sensitization of the singlet state of organic dyes via phosphorescence energy transfer from organic phosphors is proposed as an alternative strategy to realize “afterglow fluorescence”. This concept is demonstrated with a long‐lived phosphor as the energy donor and commercially available fluorescent dyes as the energy acceptor. Triplet‐to‐singlet Förster‐resonance energy‐transfer (TS‐FRET) between donor and acceptor chromophores, which are co‐organized in an amorphous polymer matrix, results in tuneable yellow and red afterglow from the fluorescent acceptors. Moreover, these afterglow fluorescent hybrids are highly solution‐processable and show excellent air‐stability with good quantum yields.     

Temperature‐Responsive Luminescent Solar Concentrators: Tuning Energy Transfer in a Liquid Crystalline Matrix

Temperature‐responsive luminescent solar concentrators (LSCs) have been fabricated in which the Förster resonance energy transfer (FRET) between a donor–acceptor pair in a liquid crystalline solvent can be tuned. At room temperatures, the perylene bisimide (PBI) acceptor is aggregated and FRET is inactive; while after heating to a temperature above the isotropic phase of the liquid crystal solvent, the acceptor PBI completely dissolves and FRET is activated. This unusual temperature control over FRET was used to design a color‐tunable LSC. The device has been shown to be highly stable towards consecutive heating and cooling cycles, making it an appealing device for harvesting otherwise unused solar energy.     

Nonradiative energy transfer in mixed Langmuir monolayers and Langmuir–Blodgett films of compounds of different chemical composition and structure

Russian Chemical Bulletin - The efficiency of the Förster resonance energy transfer (FRET) in a monolayer film containing the energy donor and energy acceptor fluorophores is low since the...     

Ultrafast study of inter‐ and intrachain energy transfer in a core–polymer

Interchain interactions can play a positive role in reaching amplified spontaneous emission in an interesting core–polymer system where the donor (side chains) and the acceptor (core) are chemically linked together. Different degree of interchain interactions modifies the photophysical characteristics of the polymer. By means of transient absorption spectroscopy we show that the stimulated emission from the core decreases passing from solid state to concentrated solution and it is almost absent in the diluted solution. The conformational rearrangements of the core–polymer chain in solution limits the efficiency of the intrachain Förster energy transfer mechanism. The free chain rotations decrease the exciton hopping along the conjugated chains, the ratio between donor and acceptor moieties in the polymer, and change the relative orientation of the transition dipoles of the donor and acceptor causing a strong decrease of energy transfer efficiency and subsequently of the gain. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 965–969     

Manipulation of Förster energy transfer of coupled fluorophores through biotransformation by Pseudomonas resinovorans CA10

An alkyne‐terminated anthracene and azide‐terminated carbazole were joined through a copper‐catalyzed cycloaddition to form a joined donor/acceptor pair. The photonic pair exhibited energy transfer when excited at the peak absorbance of carbazole and fluoresced with an anthracene spectral response. The fluorescent behavior was confirmed as Förster energy transfer (FRET). The lysate of Pseudomonas resinovorans CA10, a member of a predominant group of soil microorganisms that can metabolize a host of substrates, was employed to degrade the pair and alter the luminance spectral characteristics. The FRET was diminished and the corresponding, individual fluorescence of carbazole and anthracene returned. This general approach may find applications in single‐cell metabolic studies and bioactivity assays.     

Spray‐processable thiazolothiazole‐based copolymers with altered donor groups and their electrochromic properties

Two novel thiazolo[5,4‐d]thiazole containing donor–acceptor type alternating copolymers, poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)thiophen‐2‐yl)‐5‐(thiophen‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzTh) and poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)furan‐2‐yl)‐5‐(furan‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzFr) were synthesized by Stille coupling polymerization and their electrochemical and electrochromic properties were explored. Electrochemical activities of the spray‐casted polymer films were determined by cyclic voltammetry. To evaluate the effect of thiophene and furan moieties on the optical properties of the copolymers, spectroelectrochemistry studies were performed. To examine the switching abilities, copolymer films were subjected to a double potential step chronoamperometry in their local maximum absorptions. Both thiazolothiazole‐containing copolymers showed multichromic properties with low band‐gap values 1.7 and 1.9 eV for BTzTh and BTzFr, respectively. The decent electrochromical properties together with solution processability make them important candidates for electrochromic applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3901–3906     

Measurements of FRET in a glucose-sensitive affinity system with frequency-domain lifetime spectroscopy

We report measurements of fluorescence resonance energy transfer (FRET) for glucose sensing in an established concanavalin A–dextran affinity system using frequency‐domain lifetime spectroscopy. A dextran (MW 2000000) labeled with a small fluorescent donor molecule, Alexa Fluor 568, was used to competitively bind to a sugar‐binding protein, concanavalin A, labeled with acceptor molecule, Alexa Fluor 647, in the presence of glucose. The FRET‐quenching kinetics of the donor were analyzed from frequency‐domain measurements as a function of both glucose and acceptor‐protein concentrations using a Förster‐type decay kinetics model. The results show that the frequency‐domain measurements and donor decay kinetics can quantitatively indicate changes in the competitive binding of 0.09 μM dextran to labeled concanavalin A at a solution concentration of 10.67 μM in the presence of glucose at concentrations ranging from 0 to 224 mg/dL.     

Plasmon Effect of Ag Nanoparticles on Förster Resonance Energy Transfer in a Series of Cationic Polymethine Dyes

Theoretical and Experimental Chemistry - Enhanced Förster resonance energy transfer was found for donor–acceptor pairs of cationic dyes in the presences of silver nanoparticles (NPs) in...     

Efficient Excitation‐Energy Transfer in Ion‐Based Organic Nanoparticles with Versatile Tunability of the Fluorescence Colours

Organic nanoparticles consisting of 3,3′‐diethylthiacyanine (TC) and ethidium (ETD) dyes are synthesized by ion‐association between the cationic dye mixture (10 % ETD doping) and the tetrakis(4‐fluorophenyl)borate (TFPB) anion, in the presence of a neutral stabilizing polymer, in aqueous solution. Doping with ETD makes the particle size smaller than without doping. Size tuning can also be conducted by varying the molar ratio (ρ) of the loaded anion to the cationic dyes. The fluorescence spectrum of TC shows good overlap with the absorption of ETD in the 450–600 nm wavelength region, so efficient excitation‐energy transfer from TC (donor) to ETD (acceptor) is observed, yielding organic nanoparticles whose fluorescence colours are tunable. Upon ETD doping, the emission colour changes significantly from greenish‐blue to reddish or whitish. This change is mainly dependent on ρ. For the doped nanoparticle sample with ρ=1, the intensity of fluorescence ascribed to ETD is ～150‐fold higher than that from pure ETD nanoparticles (efficient antenna effect). Non‐radiative Förster resonance‐energy transfer (FRET) is the dominant mechanism for the ETD fluorescence enhancement. The organic nanoparticles of a binary dye system fabricated by the ion‐association method act as efficient light‐harvesting antennae, which are capable of transferring light energy to the dopant acceptors in very close proximity to the donors, and can have multi‐wavelength emission colours with high fluorescence quantum yields.     

Synthesis of Site‐Specific Dye‐Labeled Polymer via Atom Transfer Radical Polymerization (ATRP) for Quantitative Characterization of the Well‐Defined Interchain Distance

Novel difunctional initiators that incorporate Förster/fluorescence resonance energy transfer (FRET) pairs are generated to carry out atom transfer radical polymerization of styrene, methyl methacrylate, and n‐butyl methacrylate monomers by an efficient manner. Based on the chemical structures of the initiators, the locations of the fluorophore moiety are dictated to be in the center of the chain with accurately quantified chain functionality (>90% labeling ratio). The site‐specific integration of FRET dyes into separate polymer chain centers allows for characterization of the well‐defined interchain distance quantitatively based on the response between these fluorescent probes. The reliability of this technique is verified in bulk state, which is in well agreement with the theoretical ones. This well‐defined FRET system is expected to be a promising candidate to provide a distinct physical image at a microscopic level regarding scaling chain dimension, chain interpenetration, and polymer compatibility.

     

In‐capillary probing of quantum dots and fluorescent protein self‐assembly and displacement using Förster resonance energy transfer

Herein, a Förster resonance energy transfer system was designed, which consisted of CdSe/ZnS quantum dots donor and mCherry fluorescent protein acceptor. The quantum dots and the mCherry proteins were conjugated to permit Förster resonance energy transfer. Capillary electrophoresis with fluorescence detection was used for the analyses for the described system. The quantum dots and mCherry were sequentially injected into the capillary, while the real‐time fluorescence signal of donor and acceptor was simultaneously monitored by two channels with fixed wavelength detectors. An effective separation of complexes from free donor and acceptor was achieved. Results showed quantum dots and hexahistidine tagged mCherry had high affinity and the assembly was affected by His₆‐mCherry/quantum dot molar ratio. The kinetics of the self‐assembly was calculated using the Hill equation. The microscopic dissociation constant values for out of‐ and in‐capillary assays were 10.49 and 23.39 μM, respectively. The capillary electrophoresis with fluorescence detection that monitored ligands competition assay further delineated the different binding capacities of histidine containing peptide ligands for binding sites on quantum dots. This work demonstrated a novel approach for the improvement of Förster resonance energy transfer for higher efficiency, increased sensitivity, intuitionistic observation, and low sample requirements of the in‐capillary probing system.     

Promotion of Förster Resonance Energy Transfer in a Saponite Clay Containing Luminescent Polyhedral Oligomeric Silsesquioxane and Rhodamine Dye

A new hybrid photostable saponite clay with embedded donor–acceptor dyes was prepared and characterized in this work. The saponite is intercalated with a luminescent polyhedral oligomeric silsesquioxane, which transfers the photoexcitation energy directly to an acceptor dye (rhodamine B). The obtained composite material was characterized by means of XRD, TEM microscopy, and UV/Vis and photoluminescence spectroscopy. A physicochemical study showed that the system behaved as an efficient Förster resonance energy transfer pair, owing to the very good spectral overlap of donor emission (λ_em=510–540 nm) and acceptor absorption in the λ=530–570 nm range. The hybrid material represents the first example of a photonic antenna based on a synthetic saponite clay and can be considered a step forward in the search for new, efficient, and stable materials suitable for light‐harvesting applications.     

Synthesis and characterization of thiazolothiazole‐based polymers and their applications in polymer solar cells

A novel series of thiazolothiazole (Tz)‐based copolymers, poly[9,9‐didecylfluorene‐2,7‐diyl‐alt‐2,5‐bis‐(3‐hexylthiophene‐2‐yl)thiazolo[5,4‐d]thiazole] (P1), poly[9,9‐dioctyldibenzosilole‐2,7‐diyl‐alt‐2,5‐bis‐(3‐hexylthiophene‐2‐yl)thiazolo[5,4‐d]thiazole] (P2), and poly[4,4′‐bis(2‐ethylhexyl)‐dithieno[3,2‐b:2′,3′‐d]silole‐alt‐2,5‐bis‐(3‐hexylthiophene‐2‐yl)thiazolo[5,4‐d]thiazole] (P3), were synthesized for the use as donor materials in polymer solar cells (PSCs). The field‐effect carrier mobilities and the optical, electrochemical, and photovoltaic properties of the copolymers were investigated. The results suggest that the donor units in the copolymers significantly influenced the band gap, electronic energy levels, carrier mobilities, and photovoltaic properties of the copolymers. The band gaps of the copolymers were in the range of 1.80–2.14 eV. Under optimized conditions, the Tz‐based polymers showed power conversion efficiencies (PCEs) for the PSCs in the range of 2.23–2.75% under AM 1.5 illumination (100 mW/cm²). Among the three copolymers, P1, which contained a fluorene donor unit, showed a PCE of 2.75% with a short‐circuit current of 8.12 mA/cm², open circuit voltage of 0.86 V, and a fill factor (FF) of 0.39, under AM 1.5 illumination (100 mW/cm²). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Efficient Photoinduced Energy Transfer in a Newly Developed Hybrid SBA‐15 Photonic Antenna

A new hybrid photostable donor–acceptor mesoporous SBA‐15 silica system was designed and prepared. It consists of an encapsulated donor, the Super Yellow (SY) polymer, which transfers the photoexcitation energy directly to an acceptor dye that is linked outside the framework. The obtained composite material was characterized by X‐ray diffraction, nitrogen‐physisorption porosimetry, diffuse‐reflectance (DR)‐UV/Vis spectroscopy and photoluminescence, space‐ and time‐resolved confocal microscopy. The physico‐chemical analyses showed that the system behaves as an efficient Förster resonance energy transfer (FRET) pair, and high photoluminescence was observed from the acceptor. The presented photonic antenna is the first example of dye sensitization by polymer‐loaded mesoporous silica and represents a step forward in the search for new efficient and stable materials with opto‐electronic applications.     

A Fluorescent Indicator for Imaging Lysosomal Zinc(II) with Förster Resonance Energy Transfer (FRET)‐Enhanced Photostability and a Narrow Band of Emission

We demonstrate a strategy to transfer the zinc(II) sensitivity of a fluoroionophore with low photostability and a broad emission band to a bright and photostable fluorophore with a narrow emission band. The two fluorophores are covalently connected to afford an intramolecular Förster resonance energy transfer (FRET) conjugate. The FRET donor in the conjugate is a zinc(II)‐sensitive arylvinylbipyridyl fluoroionophore, the absorption and emission of which undergo bathochromic shifts upon zinc(II) coordination. When the FRET donor is excited, efficient intramolecular energy transfer occurs to result in the emission of the acceptor boron dipyrromethene (4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene or BODIPY) as a function of zinc(II) concentration. The broad emission band of the donor/zinc(II) complex is transformed into the strong, narrow emission band of the BODIPY acceptor in the FRET conjugates, which can be captured within the narrow emission window that is preferred for multicolor imaging experiments. In addition to competing with other nonradiative decay processes of the FRET donor, the rapid intramolecular FRET of the excited FRET‐conjugate molecule protects the donor fluorophore from photobleaching, thus enhancing the photostability of the indicator. FRET conjugates 3 and 4 contain aliphatic amino groups, which selectively target lysosomes in mammalian cells. This subcellular localization preference was verified by using confocal fluorescence microscopy, which also shows the zinc(II)‐enhanced emission of 3 and 4 in lysosomes. It was further shown using two‐color structured illumination microscopy (SIM), which is capable of extending the lateral resolution over the Abbe diffraction limit by a factor of two, that the morpholino‐functionalized compound 4 localizes in the interior of lysosomes, rather than anchoring on the lysosomal membranes, of live HeLa cells.     

Energy migration and transfer in polymer systems

Theoretical treatments of singlet energy transfer are reviewed with the objective of determining the expressions most relevant for polymeric systems. Observations of singlet energy transfer from 1,3 diphenyl oxazole to 1,4 di[2-(4-methyl 5-phenyl oxazolyl)]-benzene, anthracene and benzophenone confirm that the Förster relationships are valid for dilute solutions of these small molecules. For a polymer donor in which there exists spectral overlap in absorption and emission, there is the possibility of energy migration along the chain. Under these conditions, and where acceptor diffusion may be important, it is found that relationships due to Yokota and Tanimoto are the most useful in both fluid and polymeric environments. Coefficients for migration of singlet energy down chains of poly(N-vinyl carbazole), poly(2-vinyl) naphthalene) and copolymers of N-vinyl carbazole with methyl acrylate have been evaluated. They are consistent with a model in which energy is transferred by a random walk series of Förster interactions between spectroscopically active nearest neighbours.     

Verification and Biophysical Characterization of a New Three‐Color Förster Resonance‐Energy‐Transfer (FRET) System in DNA

We report on a new three‐color FRET system consisting of three fluorescent dyes, i.e., of a carbostyril (=quinolin‐2(1H)‐one)‐derived donor D, a (bathophenanthroline)ruthenium complex as a relay chromophore A₁, and a Cy dye as A₂ (FRET=Förster resonance‐energy‐transfer) (cf. Fig. 1). With their widely matching spectroscopic properties (cf. Fig. 2), the combination of these dyes yielded excellent FRET efficiencies. Furthermore, fluorescence lifetime measurements revealed that the long fluorescence lifetime of the Ru complex was transferred to the Cy dye offering the possibility to measure the whole system in a time‐resolved mode. The FRET system was established on double‐stranded DNA (cf. Fig. 3) but it should also be generally applicable to other biomolecules.     

Porphyrin‐Ryleneimide Hybrids: Low‐Bandgap Acceptors in Energy‐Transfer Cassettes

Energy‐transfer cassettes consisting of naphthaleneimide‐fused metalloporphyrin acceptors (M=Zn and Pd) and BODIPY donors have been designed and synthesized. These systems have rigid pseudo‐tetrahedral structures with a donor‐acceptor separation of ca. 17.5 Å. Spectroscopic investigations, including femtosecond transient absorption measurements, showed efficient excitation energy transfer (EET) occurring according to the Förster mechanism. Strong fluorescence of the donor units and significant spectral overlap of the donor and acceptor subunits are prerequisites for the efficient EET in these systems.